The spec states that the minimum message retry time is 60ms, but it was
set to 20ms. Correct it.
Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet.
-----BEGIN PGP SIGNATURE-----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=wVwj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet"
* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove unused struct watcher_entry
ipmi: kcs: aspeed: Update port address comments
ipmi: Add __init/__exit annotations to module init/exit funcs
ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
ipmi:ipmb: Fix a vague comment and a typo
dt-binding: ipmi: add fallback to npcm845 compatible
ipmi: Fix comment typo
char: ipmi: modify NPCM KCS configuration
dt-bindings: ipmi: Add npcm845 compatible
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.
Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.
Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Message-Id: <20220324171159.544565-1-steve@sk2.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clang static analysis reports this issue
ipmi_ssif.c:1731:3: warning: 4th function call
argument is an uninitialized value
dev_info(&ssif_info->client->dev,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The 4th parameter is the 'len' variable.
len is only set by a successful call to do_cmd().
Initialize to len 0.
Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220320135954.2258545-1-trix@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211222032707.1912186-1-wangborong@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
During probe ssif_info->client is dereferenced in error path. However,
it is set when some of the error checking has already been done. This
causes following kernel crash if an error path is taken:
[ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present
[ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
...
[ 30.657723][ T674] pc : __dev_printk+0x28/0xa0
[ 30.657732][ T674] lr : _dev_err+0x7c/0xa0
...
[ 30.657772][ T674] Call trace:
[ 30.657775][ T674] __dev_printk+0x28/0xa0
[ 30.657778][ T674] _dev_err+0x7c/0xa0
[ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e]
[ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0
...
Initialize ssif_info->client before any error path can be taken. Clear
i2c_client data in the error path to prevent the dangling pointer from
leaking.
Fixes: c4436c9149 ("ipmi_ssif: avoid registering duplicate ssif interface")
Cc: stable@vger.kernel.org # 5.4.x
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Message-Id: <20211208093239.4432-1-ykaukab@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf, snprintf or sprintf makes more
sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Message-Id: <20211021110608.1060260-1-ye.guojin@zte.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This function actually needs no return value. So remove the unneeded
check and make it void.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Message-Id: <20210301140515.18951-1-zhangliguang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
commit 9162052173 ("ipmi: Add alert handling to SSIF") introduces
support of SMBus alert. So, just remove TODO comment in order not to
confuse future readers.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Message-Id: <20200624065405.17653-2-misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Platform devices can only come in through the DMI interface, and that
will get done before initialization is complete. Therefore there is no
reason to hande getting a device in new_ssif_client after
initialization.
Dynamic entries can still come in through the i2c interfaces, but that's
handled differently.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Sparse reports a warning at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
warning: context imbalance in ipmi_ssif_lock_cond()
- wrong count at exit
warning: context imbalance in ipmi_ssif_unlock_cond()
- unexpected unlock
The root cause is the missing annotation at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
Add the missing __acquires(&ata_scsi_rbuf_lock)
Add the missing __releases(&ata_scsi_rbuf_lock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Message-Id: <20200403160505.2832-6-jbi.octave@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In error cases a NULL can be passed to memcpy. The length will always
be zero, so it doesn't really matter, but go ahead and check for NULL,
anyway, to be more precise and avoid static analysis errors.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It is possible that SSIF interface entry is present in both DMI and ACPI
tables. In SMP systems, in such cases it is possible that ssif_probe could
be called simultaneously from i2c interface (from ACPI) and from DMI on
different CPUs at kernel boot. Both try to register same SSIF interface
simultaneously and result in race.
In such cases where ACPI and SMBIOS both IPMI entries are available, we
need to prefer ACPI over SMBIOS so that ACPI functions work properly if
they use IPMI.
So, if we get an ACPI interface and have already registered an SMBIOS
at the same address, we need to remove the SMBIOS one and add the ACPI.
Log:
[ 38.774743] ipmi device interface
[ 38.805006] ipmi_ssif: IPMI SSIF Interface driver
[ 38.861979] ipmi_ssif i2c-IPI0001:06: ssif_probe CPU 99 ***
[ 38.863655] ipmi_ssif 0-000e: ssif_probe CPU 14 ***
[ 38.863658] ipmi_ssif: Trying SMBIOS-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0
[ 38.869500] ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0
[ 38.914530] ipmi_ssif: Unable to clear message flags: -22 7 c7
[ 38.952429] ipmi_ssif: Unable to clear message flags: -22 7 00
[ 38.994734] ipmi_ssif: Error getting global enables: -22 7 00
[ 39.015877] ipmi_ssif 0-000e: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20)
[ 39.377645] ipmi_ssif i2c-IPI0001:06: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20)
[ 39.387863] ipmi_ssif 0-000e: IPMI message handler: BMC returned incorrect response, expected netfn 7 cmd 42, got netfn 7 cmd 1
...
[NOTE] : Added custom prints to explain the problem.
In the above log, ssif_probe is executed simultaneously on two different
CPUs.
This patch fixes this issue in following way:
- Adds ACPI entry also to the 'ssif_infos' list.
- Checks the list if SMBIOS is already registered, removes it and adds
ACPI.
- If ACPI is already registered, it ignores SMBIOS.
- Adds mutex lock throughout the probe process to avoid race.
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1566389064-27356-1-git-send-email-kamlakantp@marvell.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
ipmi_si_sm.h was getting included in lots of places it didn't
belong. Rework things a bit to remove all the dependencies,
mostly just moving things between include files that were in
the wrong place and removing bogus includes.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If platform_driver_register() fails from init_ipmi_ssif(),
platform_driver_unregister() called unconditionally will
trigger following warning,
ipmi_ssif: Unable to register driver: -12
------------[ cut here ]------------
Unexpected driver unregister!
WARNING: CPU: 1 PID: 6305 at drivers/base/driver.c:193 driver_unregister+0x60/0x70 drivers/base/driver.c:193
Fix it by adding platform_registered variable, only unregister platform
driver when it is already successfully registered.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Message-Id: <20190524143724.43218-1-wangkefeng.wang@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It's just noise, really, lots of systems don't have it.
Reported-by: Kamlakant Patel <kamlakantp@marvell.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
According to ipmi spec, block number is a number that is incremented,
starting with 0, for each new block of message data returned using the
middle transaction.
Here, the 'blocknum' is data[0] which always starts from zero(0) and
'ssif_info->multi_pos' starts from 1.
So, we need to add +1 to blocknum while comparing with multi_pos.
Fixes: 7d6380cd40 ("ipmi:ssif: Fix handling of multi-part return messages").
Reported-by: Kiran Kolukuluru <kirank@ami.com>
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com>
[Also added a debug log if the block numbers don't match.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Trivial fix to clean up an indentation issue, remove space
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The code to tell the lower layer to enable or disable watching for
certain things was lazy in disabling, it waited until a timer tick
to see if a disable was necessary. Not a really big deal, but it
could be improved.
Modify the code to enable and disable watching immediately and don't
do it from the background timer any more.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
The IPMI driver has a mechanism to tell the lower layers it needs
to watch for messages, commands, and watchdogs (so it doesn't
needlessly poll). However, it needed some extensions, it needed
a way to tell what is being waited for so it could set the timeout
appropriately.
The update to the lower layer was also being done once a second
at best because it was done in the main timeout handler. However,
if a command is sent and a response message is coming back,
it needed to be started immediately. So modify the code to
update immediately if it needs to be enabled. Disable is still
lazy.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Commit 89986496de ("ipmi: Turn off all activity on an idle ipmi
interface") modified the IPMI code to only request events when the
driver had somethine waiting for events. The SSIF code, however,
was using the event fetch request to also fetch the flags.
Add a timer and the proper handling for the upper layer telling
whether flags fetches are required.
Reported-by: Kamlakant Patel <Kamlakant.Patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
The block number was not being compared right, it was off by one
when checking the response.
Some statistics wouldn't be incremented properly in some cases.
Check to see if that middle-part messages always have 31 bytes of
data.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
The spec was fairly confusing about how multi-part transmit messages
worked, so the original implementation only added support for two
part messages. But after talking about it with others and finding
something I missed, I think it makes more sense.
The spec mentions smbus command 8 in a table at the end of the
section on SSIF support as the end transaction. If that works,
then all is good and as it should be. However, some implementations
seem to use a middle transaction <32 bytes tomark the end because of the
confusion in the spec, even though that is an SMBus violation if
the number of bytes is zero.
So this change adds some tests, if command=8 works, it uses that,
otherwise if an empty end transaction works, it uses a middle
transaction <32 bytes to mark the end. If neither works, then
it limits the size to 63 bytes as it is now.
Cc: Harri Hakkarainen <harri@cavium.com>
Cc: Bazhenov, Dmitry <dmitry.bazhenov@auriga.com>
Cc: Mach, Dat <Dat.Mach@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI DMI code was adding platform overrides, which is not
really an ideal solution. Switch to using the id_table in
the drivers to identify the devices.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add and use #define pr_fmt/dev_fmt, and remove #define PFX
This also prefixes some messages that were not previously prefixed.
Miscellanea:
o Convert printk(KERN_<level> to pr_<level>(
o Use %s, __func__ where appropriate
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is a potential execution path in which function ssif_info_find()
returns NULL, hence there is a NULL pointer dereference when accessing
pointer *addr_info*
Fix this by null checking *addr_info* before dereferencing it.
Addresses-Coverity-ID: 1473145 ("Explicit null dereferenced")
Fixes: e333054a91d1 ("ipmi: Fix I2C client removal in the SSIF driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There were certain situations where ipmi_register_smi() would
return a failure, but the interface would still be registered
and would need to be unregistered. This is obviously a bad
design and resulted in an oops in certain failure cases.
If the interface is started up in ipmi_register_smi(), then
an error occurs, shut down the interface there so the
cleanup can be done properly.
Fix the various smi users, too.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Justin Ernst <justin.ernst@hpe.com>
Tested-by: Justin Ernst <justin.ernst@hpe.com>
Cc: Andrew Banman <abanman@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: <stable@vger.kernel.org> # 4.18.x
Currently, function ssif_remove returns _rv_, which is a variable that
is never initialized.
Fix this by removing variable _rv_ and return 0 instead.
Addresses-Coverity-ID: 1467999 ("Uninitialized scalar variable")
Fixes: 6a0d23ed33 ("ipmi: ipmi_unregister_smi() cannot fail, have it
return void")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Due to changes in the way shutdown is done, it is no longer
required to check that the interface is set.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move the shutdown handling to a shutdown function called from
the IPMI core code. That makes for a cleaner shutdown.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 484.736496] pgd = ffff0000094a2000
[ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000
[ 484.748158] Internal error: Oops: 96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
Corey Minyard