v5 filesystems use 512 byte inodes as a minimum, so read inodes in
clusters that are effectively half the size of a v4 filesystem with
256 byte inodes. For v5 fielsystems, scale the inode cluster size
with the size of the inode so that we keep a constant 32 inodes per
cluster ratio for all inode IO.
This only works if mkfs.xfs sets the inode alignment appropriately
for larger inode clusters, so this functionality is made conditional
on mkfs doing the right thing. xfs_repair needs to know about
the inode alignment changes, too.
Wall time:
create bulkstat find+stat ls -R unlink
v4 237s 161s 173s 201s 299s
v5 235s 163s 205s 31s 356s
patched 234s 160s 182s 29s 317s
System time:
create bulkstat find+stat ls -R unlink
v4 2601s 2490s 1653s 1656s 2960s
v5 2637s 2497s 1681s 20s 3216s
patched 2613s 2451s 1658s 20s 3007s
So, wall time same or down across the board, system time same or
down across the board, and cache hit rates all improve except for
the ls -R case which is a pure cold cache directory read workload
on v5 filesystems...
So, this patch removes most of the performance and CPU usage
differential between v4 and v5 filesystems on traversal related
workloads.
Note: while this patch is currently for v5 filesystems only, there
is no reason it can't be ported back to v4 filesystems. This hasn't
been done here because bringing the code back to v4 requires
forwards and backwards kernel compatibility testing. i.e. to
deterine if older kernels(*) do the right thing with larger inode
alignments but still only using 8k inode cluster sizes. None of this
testing and validation on v4 filesystems has been done, so for the
moment larger inode clusters is limited to v5 superblocks.
(*) a current default config v4 filesystem should mount just fine on
2.6.23 (when lazy-count support was introduced), and so if we change
the alignment emitted by mkfs without a feature bit then we have to
make sure it works properly on all kernels since 2.6.23. And if we
allow it to be changed when the lazy-count bit is not set, then it's
all kernels since v2 logs were introduced that need to be tested for
compatibility...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.
Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.
The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on-disk format definitions for the directory and attribute
structures are spread across 3 header files right now, only one of
which is dedicated to defining on-disk structures and their
manipulation (xfs_dir2_format.h). Pull all the format definitions
into a single header file - xfs_da_format.h - and switch all the
code over to point at that.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.
Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
We've been seeing occasional problems with log space leaks and
transaction underruns such as this for some time:
XFS (dm-0): xlog_write: reservation summary:
trans type = FSYNC_TS (36)
unit res = 2740 bytes
current res = -4 bytes
total reg = 0 bytes (o/flow = 0 bytes)
ophdrs = 0 (ophdr space = 0 bytes)
ophdr + reg = 0 bytes
num regions = 0
Turns out that xfstests generic/311 is reliably reproducing this
problem with the test it runs at sequence 16 of it execution. It is
a 100% reliable reproducer with the mkfs configuration of "-b
size=1024 -m crc=1" on a 10GB scratch device.
The problem? Inode forks in btree format are logged in memory
format, not disk format (i.e. bmbt format, not bmdr format). That
means there is a btree block header being logged, when such a
structure is never written to the inode fork in bmdr format. The
bmdr header in the inode is only 4 bytes, while the bmbt header is
24 bytes for v4 filesystems and 72 bytes for v5 filesystems.
We currently reserve the inode size plus the rounded up overhead of
a logging a buffer, which is 128 bytes. That means the reservation
for a 512 byte inode is 640 bytes. What we can actually log is:
inode core, data and attr fork = 512 bytes
inode log format + log op header = 56 + 12 = 68 bytes
data fork bmbt hdr = 24/72 bytes
attr fork bmbt hdr = 24/72 bytes
So, for a v2 inodes we can log at least 628 bytes, but if we split that
inode over the end of the log across log buffers, we need to also
another log op header, which takes us to 640 bytes. If there's
another reservation taken out of this that I haven't taken into
account (perhaps multiple iclog splits?) or I haven't corectly
calculated the bmbt format space used (entirely possible), then
we will overun it.
For v3 inodes the maximum is actually 724 bytes, and even a
single maximally sized btree format fork can blow it (652 bytes).
And that's exactly what is happening with the FSYNC_TS transaction
in the above output - it's consumed 644 bytes of space after the CIL
context took the space reserved for it (2100 bytes).
This problem has always been present in the XFS code - the btree
format inode forks have always been logged in this manner. Hence
there has always been the possibility of an overrun with such a
transaction. The CRC code has just exposed it frequently enough to
be able to debug and understand the root cause....
So, let's fix all the inode log space reservations.
[ I'm so glad we spent the effort to clean up the transaction
reservation code. This is an easy fix now. ]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the new xfs_trans_res structure has been introduced, the log
reservation size, log count as well as log flags are pre-initialized
at mount time. So it's time to refine xfs_trans_reserve() interface
to be more neat.
Also, introduce a new helper M_RES() to return a pointer to the
mp->m_resv structure to simplify the input.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
A preparation step.
For now fsync_ts transaction use the pre-calculated log reservation
size of tr_swrite. This patch introduce a new item tr_fsyncts to
mp->m_reservations structure so that we can fetch the log
reservation value for it in a same manner to others.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Introduce a new structure xfs_trans_res to hold transaction
reservation item info per log ticket.
We also need to improve xfs_trans_resv_calc() by initializing the
log count as well as log flags for permanent log reservation.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is a bunch of code in xfs_bmap.c that is kernel specific and
not shared with userspace. To minimise the difference between the
kernel and userspace code, shift this unshared code to
xfs_bmap_util.c, and the declarations to xfs_bmap_util.h.
The biggest issue here is xfs_bmap_finish() - userspace has it's own
definition of this function, and so we need to move it out of
xfs_bmap.[ch]. This means several other files need to include
xfs_bmap_util.h as well.
It also introduces and interesting dance for the stack switching
code in xfs_bmapi_allocate(). The stack switching/workqueue code is
actually moved to xfs_bmap_util.c, so that userspace can simply use
a #define in a header file to connect the dots without needing to
know about the stack switch code at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The transaction reservation size calculations is used by both kernel
and userspace, but most of the transaction code in xfs_trans.c is
kernel specific. Split all the transaction reservation code out into
it's own files to make sharing with userspace simpler. This just
leaves kernel-only definitions in xfs_trans.h, so it doesn't need to
be shared with userspace anymore, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner