Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
If generic_drop_inode() returns true, it means iput_final() can evict
this inode regardless of whether it is dirty or not. If we check
I_DONTCACHE in generic_drop_inode(), any inode with this bit set will be
evicted unconditionally. This is not the desired behavior because
I_DONTCACHE only means the inode shouldn't be cached on the LRU list.
As for whether we need to evict this inode, this is what
generic_drop_inode() should do. This patch corrects the usage of
I_DONTCACHE.
This patch was proposed in [1].
[1]: https://lore.kernel.org/linux-fsdevel/20200831003407.GE12096@dread.disaster.area/
Fixes: dae2f8ed79 ("fs: Lift XFS_IDONTCACHE to the VFS layer")
Signed-off-by: Hao Li <lihao2018.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The page cache needs to know whether the filesystem supports THPs so that
it doesn't send THPs to filesystems which can't handle them. Dave Chinner
points out that getting from the page mapping to the filesystem type is
too many steps (mapping->host->i_sb->s_type->fs_flags) so cache that
information in the address space flags.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20200916032717.22917-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=YVwD
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"There's some core VFS changes which affect a couple of filesystems:
- Make the inode hash table RCU safe and providing some RCU-safe
accessor functions. The search can then be done without taking the
inode_hash_lock. Care must be taken because the object may be being
deleted and no wait is made.
- Allow iunique() to avoid taking the inode_hash_lock.
- Allow AFS's callback processing to avoid taking the inode_hash_lock
when using the inode table to find an inode to notify.
- Improve Ext4's time updating. Konstantin Khlebnikov said "For now,
I've plugged this issue with try-lock in ext4 lazy time update.
This solution is much better."
Then there's a set of changes to make a number of improvements to the
AFS driver:
- Improve callback (ie. third party change notification) processing
by:
(a) Relying more on the fact we're doing this under RCU and by
using fewer locks. This makes use of the RCU-based inode
searching outlined above.
(b) Moving to keeping volumes in a tree indexed by volume ID
rather than a flat list.
(c) Making the server and volume records logically part of the
cell. This means that a server record now points directly at
the cell and the tree of volumes is there. This removes an N:M
mapping table, simplifying things.
- Improve keeping NAT or firewall channels open for the server
callbacks to reach the client by actively polling the fileserver on
a timed basis, instead of only doing it when we have an operation
to process.
- Improving detection of delayed or lost callbacks by including the
parent directory in the list of file IDs to be queried when doing a
bulk status fetch from lookup. We can then check to see if our copy
of the directory has changed under us without us getting notified.
- Determine aliasing of cells (such as a cell that is pointed to be a
DNS alias). This allows us to avoid having ambiguity due to
apparently different cells using the same volume and file servers.
- Improve the fileserver rotation to do more probing when it detects
that all of the addresses to a server are listed as non-responsive.
It's possible that an address that previously stopped responding
has become responsive again.
Beyond that, lay some foundations for making some calls asynchronous:
- Turn the fileserver cursor struct into a general operation struct
and hang the parameters off of that rather than keeping them in
local variables and hang results off of that rather than the call
struct.
- Implement some general operation handling code and simplify the
callers of operations that affect a volume or a volume component
(such as a file). Most of the operation is now done by core code.
- Operations are supplied with a table of operations to issue
different variants of RPCs and to manage the completion, where all
the required data is held in the operation object, thereby allowing
these to be called from a workqueue.
- Put the standard "if (begin), while(select), call op, end" sequence
into a canned function that just emulates the current behaviour for
now.
There are also some fixes interspersed:
- Don't let the EACCES from ICMP6 mapping reach the user as such,
since it's confusing as to whether it's a filesystem error. Convert
it to EHOSTUNREACH.
- Don't use the epoch value acquired through probing a server. If we
have two servers with the same UUID but in different cells, it's
hard to draw conclusions from them having different epoch values.
- Don't interpret the argument to the CB.ProbeUuid RPC as a
fileserver UUID and look up a fileserver from it.
- Deal with servers in different cells having the same UUIDs. In the
event that a CB.InitCallBackState3 RPC is received, we have to
break the callback promises for every server record matching that
UUID.
- Don't let afs_statfs return values that go below 0.
- Don't use running fileserver probe state to make server selection
and address selection decisions on. Only make decisions on final
state as the running state is cleared at the start of probing"
Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part)
* tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits)
afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly
afs: Show more a bit more server state in /proc/net/afs/servers
afs: Don't use probe running state to make decisions outside probe code
afs: Fix afs_statfs() to not let the values go below zero
afs: Fix the by-UUID server tree to allow servers with the same UUID
afs: Reorganise volume and server trees to be rooted on the cell
afs: Add a tracepoint to track the lifetime of the afs_volume struct
afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op
afs: Detect cell aliases 2 - Cells with no root volumes
afs: Detect cell aliases 1 - Cells with root volumes
afs: Implement client support for the YFSVL.GetCellName RPC op
afs: Retain more of the VLDB record for alias detection
afs: Fix handling of CB.ProbeUuid cache manager op
afs: Don't get epoch from a server because it may be ambiguous
afs: Build an abstraction around an "operation" concept
afs: Rename struct afs_fs_cursor to afs_operation
afs: Remove the error argument from afs_protocol_error()
afs: Set error flag rather than return error from file status decode
afs: Make callback processing more efficient.
afs: Show more information in /proc/net/afs/servers
...
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Make the inode hash table RCU searchable so that searches that want to
access or modify an inode without taking a ref on that inode can do so
without taking the inode hash table lock.
The main thing this requires is some RCU annotation on the list
manipulation operations. Inodes are already freed by RCU in most cases.
Users of this interface must take care as the inode may be still under
construction or may be being torn down around them.
There are at least three instances where this can be of use:
(1) Testing whether the inode number iunique() is going to return is
currently unique (the iunique_lock is still held).
(2) Ext4 date stamp updating.
(3) AFS callback breaking.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
cc: linux-ext4@vger.kernel.org
cc: linux-afs@lists.infradead.org
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use *foo makes the toolchain to think that this is an emphasis, causing
those warnings:
./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string.
./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string.
./fs/inode.c:1615: WARNING: Inline emphasis start-string without end-string.
So, use, instead, ``*foo``, in order to mark it as a literal block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e8da46a0e57f2af6d63a0c53665495075698e28a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.
This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.
It will change the behavior of bmap() on return:
- negative value in case of error
- zero on success or map fell into a hole
In case of a hole, the *block will be zero too
Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Casefolded encrypted directories will use a new dirhash method that
requires a secret key. If the directory uses a v2 encryption policy,
it's easy to derive this key from the master key using HKDF. However,
v1 encryption policies don't provide a way to derive additional keys.
Therefore, don't allow casefolding on directories that use a v1 policy.
Specifically, make it so that trying to enable casefolding on a
directory that has a v1 policy fails, trying to set a v1 policy on a
casefolded directory fails, and trying to open a casefolded directory
that has a v1 policy (if one somehow exists on-disk) fails.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, and other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Anything that walks all inodes on sb->s_inodes list without rescheduling
risks softlockups.
Previous efforts were made in 2 functions, see:
c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
ac05fbb inode: don't softlockup when evicting inodes
but there hasn't been an audit of all walkers, so do that now. This
also consistently moves the cond_resched() calls to the bottom of each
loop in cases where it already exists.
One loop remains: remove_dquot_ref(), because I'm not quite sure how
to deal with that one w/o taking the i_lock.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
update_time() also has an internal function pointer
update_time. Even though this works correctly, it is
confusing to the readers.
Just use a regular if statement to call the generic
function or the function pointer.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are no more callers to the function remaining.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In previous patch, an application could put part of its text section in
THP via madvise(). These THPs will be protected from writes when the
application is still running (TXTBSY). However, after the application
exits, the file is available for writes.
This patch avoids writes to file THP by dropping page cache for the file
when the file is open for write. A new counter nr_thps is added to struct
address_space. In do_dentry_open(), if the file is open for write and
nr_thps is non-zero, we drop page cache for the whole file.
Link: http://lkml.kernel.org/r/20190801184244.3169074-8-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
timespec_trunc() function is used to truncate a
filesystem timestamp to the right granularity.
But, the function does not clamp tv_sec part of the
timestamps according to the filesystem timestamp limits.
The replacement api: timestamp_truncate() also alters the
signature of the function to accommodate filesystem
timestamp clamping according to flesystem limits.
Note that the tv_nsec part is set to 0 if tv_sec is not within
the range supported for the filesystem.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
- Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls
(which were the file attribute setters for ext4 and xfs and have now
been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories.
-----BEGIN PGP SIGNATURE-----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=uH2E
-----END PGP SIGNATURE-----
Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where they
are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle cross-superblock
copy_file_range in their local handlers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl0BGvAACgkQ+H93GTRK
tOu2aw/+KGG7PiXm9ED3ZXUppKVddrZMOgqM7mSfHo6TBgW3pJUJcRIhawK0Wz/P
stgTsOkurHSl3iT3vQyX4GTZvLoGN/rfsRLPxogJptBUqVv3BOrXsrI53f7V/kbm
rtjlYsgExji7VBUiMTe5kOWWqxyR7B4nXyvY/8rier57rW/8C1I58B0OrxAmTK0k
rz1e5BtE1dg91xA7cSdEc38FInz8MW8cvsrEzW9vyYY4IVE0PBuhhA1EvryxTrAZ
hfthHFfzwxhJkI0mdha8uqNufNWrHLSqiwyjYC7pwAwSQzQPiQz9U17flu+URnfF
kXaR5LdXbBP3pl46RdthrfuonWsv612cC1Qwfjs8PBG9lG7b9PGJ40MGVTiw7LlQ
924/03ho0zAnV0E8Qn5O9nPshQNDJhwhzMS39EmMyFKb1D5XGzdMV0gDdIfx6hdO
HDbw6VQ33S59gvk7v/gxsFB5Bs4PKfamHx/QmwQwpqWM5XExcr0yJ90OTBtAuY4r
S+9gwG6uED3aPh8HbQ5UgnA8bZmMmi8AkcBvqJ9GgNw5SbZl0oyv9Sj6JNpoOejV
8y9JkhoZUxqiihnKTw/vtMrj5RCOfifNBjMSwrShfLdLKtK0AZl1mXC0/1Q3VnEQ
TUcyRHEzrtHgJ9/AK9xIyDNvNYzvHSLZj7maoZZumgQa2FOFrmw=
=qM44
-----END PGP SIGNATURE-----
Merge tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull copy_file_range updates from Darrick Wong:
"This fixes numerous parameter checking problems and inconsistent
behaviors in the new(ish) copy_file_range system call.
Now the system call will actually check its range parameters
correctly; refuse to copy into files for which the caller does not
have sufficient privileges; update mtime and strip setuid like file
writes are supposed to do; and allows copying up to the EOF of the
source file instead of failing the call like we used to.
Summary:
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where
they are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle
cross-superblock copy_file_range in their local handlers"
* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fuse: copy_file_range needs to strip setuid bits and update timestamps
vfs: allow copy_file_range to copy across devices
xfs: use file_modified() helper
vfs: introduce file_modified() helper
vfs: add missing checks to copy_file_range
vfs: remove redundant checks from generic_remap_checks()
vfs: introduce generic_file_rw_checks()
vfs: no fallback for ->copy_file_range
vfs: introduce generic_copy_file_range()
The DAX flag only applies to files and directories, so don't let it get
set for other types of files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Move the extent size hint checks that aren't xfs-specific to the vfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic checking function for the incoming FS_IOC_FSSETXATTR
fsxattr values so that we can standardize some of the implementation
behaviors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.
Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
The combination of file_remove_privs() and file_update_mtime() is
quite common in filesystem ->write_iter() methods.
Modelled after the helper file_accessed(), introduce file_modified()
and use it from generic_remap_file_range_prep().
Note that the order of calling file_remove_privs() before
file_update_mtime() in the helper was matched to the more common order by
filesystems and not the current order in generic_remap_file_range_prep().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since a283348629 ("page cache: Finish XArray conversion"), on most
major Linux distributions, the page cache doesn't correctly transition
when the hot data set is changing, and leaves the new pages thrashing
indefinitely instead of kicking out the cold ones.
On a freshly booted, freshly ssh'd into virtual machine with 1G RAM
running stock Arch Linux:
[root@ham ~]# ./reclaimtest.sh
+ dd of=workingset-a bs=1M count=0 seek=600
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ ./mincore workingset-a
153600/153600 workingset-a
+ dd of=workingset-b bs=1M count=0 seek=600
+ cat workingset-b
+ cat workingset-b
+ cat workingset-b
+ cat workingset-b
+ ./mincore workingset-a workingset-b
104029/153600 workingset-a
120086/153600 workingset-b
+ cat workingset-b
+ cat workingset-b
+ cat workingset-b
+ cat workingset-b
+ ./mincore workingset-a workingset-b
104029/153600 workingset-a
120268/153600 workingset-b
workingset-b is a 600M file on a 1G host that is otherwise entirely
idle. No matter how often it's being accessed, it won't get cached.
While investigating, I noticed that the non-resident information gets
aggressively reclaimed - /proc/vmstat::workingset_nodereclaim. This is
a problem because a workingset transition like this relies on the
non-resident information tracked in the page cache tree of evicted
file ranges: when the cache faults are refaults of recently evicted
cache, we challenge the existing active set, and that allows a new
workingset to establish itself.
Tracing the shrinker that maintains this memory revealed that all page
cache tree nodes were allocated to the root cgroup. This is a problem,
because 1) the shrinker sizes the amount of non-resident information
it keeps to the size of the cgroup's other memory and 2) on most major
Linux distributions, only kernel threads live in the root cgroup and
everything else gets put into services or session groups:
[root@ham ~]# cat /proc/self/cgroup
0::/user.slice/user-0.slice/session-c1.scope
As a result, we basically maintain no non-resident information for the
workloads running on the system, thus breaking the caching algorithm.
Looking through the code, I found the culprit in the above-mentioned
patch: when switching from the radix tree to xarray, it dropped the
__GFP_ACCOUNT flag from the tree node allocations - the flag that
makes sure the allocated memory gets charged to and tracked by the
cgroup of the calling process - in this case, the one doing the fault.
To fix this, allow xarray users to specify per-tree flag that makes
xarray allocate nodes using __GFP_ACCOUNT. Then restore the page cache
tree annotation to request such cgroup tracking for the cache nodes.
With this patch applied, the page cache correctly converges on new
workingsets again after just a few iterations:
[root@ham ~]# ./reclaimtest.sh
+ dd of=workingset-a bs=1M count=0 seek=600
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ cat workingset-a
+ ./mincore workingset-a
153600/153600 workingset-a
+ dd of=workingset-b bs=1M count=0 seek=600
+ cat workingset-b
+ ./mincore workingset-a workingset-b
124607/153600 workingset-a
87876/153600 workingset-b
+ cat workingset-b
+ ./mincore workingset-a workingset-b
81313/153600 workingset-a
133321/153600 workingset-b
+ cat workingset-b
+ ./mincore workingset-a workingset-b
63036/153600 workingset-a
153600/153600 workingset-b
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff, with no common topic whatsoever..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: document simple_get_link()
Documentation/filesystems/Locking: fix ->get_link() prototype
Documentation/filesystems/vfs.txt: document how ->i_link works
Documentation/filesystems/vfs.txt: remove bogus "Last updated" date
fs: use timespec64 in relatime_need_update
fs/block_dev.c: remove unused include
Pull vfs inode freeing updates from Al Viro:
"Introduction of separate method for RCU-delayed part of
->destroy_inode() (if any).
Pretty much as posted, except that destroy_inode() stashes
->free_inode into the victim (anon-unioned with ->i_fops) before
scheduling i_callback() and the last two patches (sockfs conversion
and folding struct socket_wq into struct socket) are excluded - that
pair should go through netdev once davem reopens his tree"
* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
orangefs: make use of ->free_inode()
shmem: make use of ->free_inode()
hugetlb: make use of ->free_inode()
overlayfs: make use of ->free_inode()
jfs: switch to ->free_inode()
fuse: switch to ->free_inode()
ext4: make use of ->free_inode()
ecryptfs: make use of ->free_inode()
ceph: use ->free_inode()
btrfs: use ->free_inode()
afs: switch to use of ->free_inode()
dax: make use of ->free_inode()
ntfs: switch to ->free_inode()
securityfs: switch to ->free_inode()
apparmor: switch to ->free_inode()
rpcpipe: switch to ->free_inode()
bpf: switch to ->free_inode()
mqueue: switch to ->free_inode()
ufs: switch to ->free_inode()
coda: switch to ->free_inode()
...
A lot of ->destroy_inode() instances end with call_rcu() of a callback
that does RCU-delayed part of freeing. Introduce a new method for
doing just that, with saner signature.
Rules:
->destroy_inode ->free_inode
f g immediate call of f(),
RCU-delayed call of g()
f NULL immediate call of f(),
no RCU-delayed calls
NULL g RCU-delayed call of g()
NULL NULL RCU-delayed default freeing
IOW, NULL ->free_inode gives the same behaviour as now.
Note that NULL, NULL is equivalent to NULL, free_inode_nonrcu; we could
mandate the latter form, but that would have very little benefit beyond
making rules a bit more symmetric. It would break backwards compatibility,
require extra boilerplate and expected semantics for (NULL, NULL) pair
would have no use whatsoever...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
file_remove_privs() might be called for non-regular files, e.g.
blkdev inode. There is no reason to do its job on things
like blkdev inodes, pipes, or cdevs. Hence, abort if
file does not refer to a regular inode.
AV: more to the point, for devices there might be any number of
inodes refering to given device. Which one to strip the permissions
from, even if that made any sense in the first place? All of them
will be observed with contents modified, after all.
Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf
Spinczyk)
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For some reason, the conversion of the VFS code away from 'struct timespec'
left one function behind that still uses it, for absolutely no reason.
Using timespec64 will make the atime update logic work correctly past
y2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It seems that commits 5f16f3225b and 00a1a053eb, both with same
commitlog ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()")
introduced the set_mask_bits API, but somehow missed not using it in ext4
in the end.
Also, set_mask_bits() is used in fs quite a bit and we can possibly come
up with a generic llsc based implementation (w/o the cmpxchg loop)
Link: http://lkml.kernel.org/r/1548275584-18096-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit a76cf1a474 ("mm: don't reclaim inodes with many
attached pages").
This change causes serious changes to page cache and inode cache
behaviour and balance, resulting in major performance regressions when
combining worklaods such as large file copies and kernel compiles.
https://bugzilla.kernel.org/show_bug.cgi?id=202441
This change is a hack to work around the problems introduced by changing
how agressive shrinkers are on small caches in commit 172b06c32b ("mm:
slowly shrink slabs with a relatively small number of objects"). It
creates more problems than it solves, wasn't adequately reviewed or
tested, so it needs to be reverted.
Link: http://lkml.kernel.org/r/20190130041707.27750-2-david@fromorbit.com
Fixes: a76cf1a474 ("mm: don't reclaim inodes with many attached pages")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Wolfgang Walter <linux@stwm.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Spock <dairinin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes the main part of the system call rework for 64-bit time_t,
which has spread over most of year 2018, the last six system calls being
- ppoll
- pselect6
- io_pgetevents
- recvmmsg
- futex
- rt_sigtimedwait
As before, nothing changes for 64-bit architectures, while 32-bit
architectures gain another entry point that differs only in the layout
of the timespec structure. Hopefully in the next release we can wire up
all 22 of those system calls on all 32-bit architectures, which gives
us a baseline version for glibc to start using them.
This does not include the clock_adjtime, getrusage/waitid, and
getitimer/setitimer system calls. I still plan to have new versions
of those as well, but they are not required for correct operation of
the C library since they can be emulated using the old 32-bit time_t
based system calls.
Aside from the system calls, there are also a few cleanups here,
removing old kernel internal interfaces that have become unused after
all references got removed. The arch/sh cleanups are part of this,
there were posted several times over the past year without a reaction
from the maintainers, while the corresponding changes made it into all
other architectures.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yIAT
-----END PGP SIGNATURE-----
Merge tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"More syscalls and cleanups
This concludes the main part of the system call rework for 64-bit
time_t, which has spread over most of year 2018, the last six system
calls being
- ppoll
- pselect6
- io_pgetevents
- recvmmsg
- futex
- rt_sigtimedwait
As before, nothing changes for 64-bit architectures, while 32-bit
architectures gain another entry point that differs only in the layout
of the timespec structure. Hopefully in the next release we can wire
up all 22 of those system calls on all 32-bit architectures, which
gives us a baseline version for glibc to start using them.
This does not include the clock_adjtime, getrusage/waitid, and
getitimer/setitimer system calls. I still plan to have new versions of
those as well, but they are not required for correct operation of the
C library since they can be emulated using the old 32-bit time_t based
system calls.
Aside from the system calls, there are also a few cleanups here,
removing old kernel internal interfaces that have become unused after
all references got removed. The arch/sh cleanups are part of this,
there were posted several times over the past year without a reaction
from the maintainers, while the corresponding changes made it into all
other architectures"
* tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
timekeeping: remove obsolete time accessors
vfs: replace current_kernel_time64 with ktime equivalent
timekeeping: remove timespec_add/timespec_del
timekeeping: remove unused {read,update}_persistent_clock
sh: remove board_time_init() callback
sh: remove unused rtc_sh_get/set_time infrastructure
sh: sh03: rtc: push down rtc class ops into driver
sh: dreamcast: rtc: push down rtc class ops into driver
y2038: signal: Add compat_sys_rt_sigtimedwait_time64
y2038: signal: Add sys_rt_sigtimedwait_time32
y2038: socket: Add compat_sys_recvmmsg_time64
y2038: futex: Add support for __kernel_timespec
y2038: futex: Move compat implementation into futex.c
io_pgetevents: use __kernel_timespec
pselect6: use __kernel_timespec
ppoll: use __kernel_timespec
signal: Add restore_user_sigmask()
signal: Add set_user_sigmask()
current_time is the last remaining caller of current_kernel_time64(),
which is a wrapper around ktime_get_coarse_real_ts64(). This calls the
latter directly for consistency with the rest of the kernel that is moving
to the ktime_get_ family of time accessors, as now documented in
Documentation/core-api/timekeeping.rst.
An open questions is whether we may want to actually call the more
accurate ktime_get_real_ts64() for file systems that save high-resolution
timestamps in their on-disk format. This would add a small overhead to
each update of the inode stamps but lead to inode timestamps to actually
have a usable resolution better than one jiffy (1 to 10 milliseconds
normally). Experiments on a variety of hardware platforms show a typical
time of around 100 CPU cycles to read the cycle counter and calculate the
accurate time from that. On old platforms without a cycle counter, this
can be signiciantly higher, up to several microseconds to access a
hardware clock, but those have become very rare by now.
I traced the original addition of the current_kernel_time() call to set
the nanosecond fields back to linux-2.5.48, where Andi Kleen added a patch
with subject "nanosecond stat timefields". Andi explains that the
motivation was to introduce as little overhead as possible back then. At
this time, reading the clock hardware was also more expensive when most
architectures did not have a cycle counter.
One side effect of having more accurate inode timestamp would be having to
write out the inode every time that mtime/ctime/atime get touched on most
systems, whereas many file systems today only write it when the timestamps
have changed, i.e. at most once per jiffy unless something else changes
as well. That change would certainly be noticed in some workloads, which
is enough reason to not do it without a good reason, regardless of the
cost of reading the time.
One thing we could still consider however would be to round the timestamps
from current_time() to multiples of NSEC_PER_JIFFY, e.g. full
milliseconds rather than having six or seven meaningless but confusing
digits at the end of the timestamp.
Link: http://lkml.kernel.org/r/20180726130820.4174359-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Spock reported that commit 172b06c32b ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.
The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache. The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there. So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.
The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.
To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page. Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.
Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Spock <dairinin@gmail.com>
Tested-by: Spock <dairinin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With no more radix tree API users left, we can drop the GFP flags
and use xa_init() instead of INIT_RADIX_TREE().
Signed-off-by: Matthew Wilcox <willy@infradead.org>
This contains two new features:
1) Stack file operations: this allows removal of several hacks from the
VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
2) Metadata only copy-up: when file is on lower layer and only metadata is
modified (except size) then only copy up the metadata and continue to
use the data from the lower file.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
=QDXH
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains two new features:
- Stack file operations: this allows removal of several hacks from
the VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
- Metadata only copy-up: when file is on lower layer and only
metadata is modified (except size) then only copy up the metadata
and continue to use the data from the lower file"
* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
ovl: Enable metadata only feature
ovl: Do not do metacopy only for ioctl modifying file attr
ovl: Do not do metadata only copy-up for truncate operation
ovl: add helper to force data copy-up
ovl: Check redirect on index as well
ovl: Set redirect on upper inode when it is linked
ovl: Set redirect on metacopy files upon rename
ovl: Do not set dentry type ORIGIN for broken hardlinks
ovl: Add an inode flag OVL_CONST_INO
ovl: Treat metacopy dentries as type OVL_PATH_MERGE
ovl: Check redirects for metacopy files
ovl: Move some dir related ovl_lookup_single() code in else block
ovl: Do not expose metacopy only dentry from d_real()
ovl: Open file with data except for the case of fsync
ovl: Add helper ovl_inode_realdata()
ovl: Store lower data inode in ovl_inode
ovl: Fix ovl_getattr() to get number of blocks from lower
ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
ovl: Copy up meta inode data from lowest data inode
ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
...
Pull vfs icache updates from Al Viro:
- NFS mkdir/open_by_handle race fix
- analogous solution for FUSE, replacing the one currently in mainline
- new primitive to be used when discarding halfway set up inodes on
failed object creation; gives sane warranties re icache lookups not
returning such doomed by still not freed inodes. A bunch of
filesystems switched to that animal.
- Miklos' fix for last cycle regression in iget5_locked(); -stable will
need a slightly different variant, unfortunately.
- misc bits and pieces around things icache-related (in adfs and jfs).
* 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jfs: don't bother with make_bad_inode() in ialloc()
adfs: don't put inodes into icache
new helper: inode_fake_hash()
vfs: don't evict uninitialized inode
jfs: switch to discard_new_inode()
ext2: make sure that partially set up inodes won't be returned by ext2_iget()
udf: switch to discard_new_inode()
ufs: switch to discard_new_inode()
btrfs: switch to discard_new_inode()
new primitive: discard_new_inode()
kill d_instantiate_no_diralias()
nfs_instantiate(): prevent multiple aliases for directory inode
iput() ends up calling ->evict() on new inode, which is not yet initialized
by owning fs. So use destroy_inode() instead.
Add to sb->s_inodes list only if inode is not in I_CREATING state (meaning
that it wasn't allocated with new_inode(), which already does the
insertion).
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 80ea09a002 ("vfs: factor out inode_insert5()")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't want open-by-handle picking half-set-up in-core
struct inode from e.g. mkdir() having failed halfway through.
In other words, we don't want such inodes returned by iget_locked()
on their way to extinction. However, we can't just have them
unhashed - otherwise open-by-handle immediately *after* that would've
ended up creating a new in-core inode over the on-disk one that
is in process of being freed right under us.
Solution: new flag (I_CREATING) set by insert_inode_locked() and
removed by unlock_new_inode() and a new primitive (discard_new_inode())
to be used by such halfway-through-setup failure exits instead of
unlock_new_inode() / iput() combinations. That primitive unlocks new
inode, but leaves I_CREATING in place.
iget_locked() treats finding an I_CREATING inode as failure
(-ESTALE, once we sort out the error propagation).
insert_inode_locked() treats the same as instant -EBUSY.
ilookup() treats those as icache miss.
[Fix by Dan Carpenter <dan.carpenter@oracle.com> folded in]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid. This is historically used for
group-shared directories.
But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
This contains a fix for the vfs_mkdir() issue discovered by Al, as well as
other fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCWxatHQAKCRDh3BK/laaZ
POg5AP95a/uUOrTJeTsENJwTmyAwHed9a6y4abKtvNErxUm4awD9FmhyYXodzJNq
9/mheT4kV2XkR/KkxI5sizfT1uPuvgA=
=+ljQ
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains a fix for the vfs_mkdir() issue discovered by Al, as
well as other fixes and cleanups"
* tag 'ovl-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use inode_insert5() to hash a newly created inode
ovl: Pass argument to ovl_get_inode() in a structure
vfs: factor out inode_insert5()
ovl: clean up copy-up error paths
ovl: return EIO on internal error
ovl: make ovl_create_real() cope with vfs_mkdir() safely
ovl: create helper ovl_create_temp()
ovl: return dentry from ovl_create_real()
ovl: struct cattr cleanups
ovl: strip debug argument from ovl_do_ helpers
ovl: remove WARN_ON() real inode attributes mismatch
ovl: Kconfig documentation fixes
ovl: update documentation for unionmount-testsuite
Linus Torvalds