Passing bp_type argument to __reserve_bp_slot() and __release_bp_slot()
functions, so we can pass another bp_type than the one defined in
bp->attr.bp_type. This will be handy in following change that fixes
breakpoint slot counts during its modification.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-3-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pass bp_type directly as a find_slot_idx() argument,
so we don't need to have whole event to get the
breakpoint slot type. It will be used in following
changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-2-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's two problems when installing cgroup events on CPUs: firstly
list_update_cgroup_event() only tries to set cpuctx->cgrp for the
first event, if that mismatches on @cgrp we'll not try again for later
additions.
Secondly, when we install a cgroup event into an active context, only
issue an event reprogram when the event matches the current cgroup
context. This avoids a pointless event reprogramming.
Signed-off-by: leilei.lin <leilei.lin@alibaba-inc.com>
[ Improved the changelog and comments. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: brendan.d.gregg@gmail.com
Cc: eranian@gmail.com
Cc: linux-kernel@vger.kernel.org
Cc: yang_oliver@hotmail.com
Link: http://lkml.kernel.org/r/20180306093637.28247-1-linxiulei@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The event schedule order (as per perf_event_sched_in()) is:
- cpu pinned
- task pinned
- cpu flexible
- task flexible
But perf_rotate_context() will unschedule cpu-flexible even if it
doesn't need a rotation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to how first programming cpu=-1 and then cpu=# is wrong, so is
rotating both. It was especially wrong when we were still programming
the PMU in this same order, because in that scenario we might never
actually end up running cpu=# events at all.
Cure this by using the active_list to pick the rotation event; since
at programming we already select the left-most event.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The last argument is, and always must be, the same.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an event group contains more events than can be scheduled on the
hardware, iterating the full event group for ctx_sched_out is a waste
of time.
Keep track of the events that got programmed on the hardware, such
that we can iterate this smaller list in order to schedule them out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all the grouping is done with RB trees, we no longer need
group_entry and can replace the whole thing with sibling_list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Scheduling in events with cpu=-1 before events with cpu=# changes
semantics and is undesirable in that it would priorize these events.
Given that groups->index is across all groups we actually have an
inter-group ordering, meaning we can merge-sort two groups, which is
just what we need to preserve semantics.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change event groups into RB trees sorted by CPU and then by a 64bit
index, so that multiplexing hrtimer interrupt handler would be able
skipping to the current CPU's list and ignore groups allocated for the
other CPUs.
New API for manipulating event groups in the trees is implemented as well
as adoption on the API in the current implementation.
pinned_group_sched_in() and flexible_group_sched_in() API are
introduced to consolidate code enabling the whole group from pinned
and flexible groups appropriately.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/372f9c8b-0cfe-4240-e44d-83d863d40813@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mark reported his arm64 perf fuzzer runs sometimes splat like:
armv8pmu_read_counter+0x1e8/0x2d8
armpmu_event_update+0x8c/0x188
armpmu_read+0xc/0x18
perf_output_read+0x550/0x11e8
perf_event_read_event+0x1d0/0x248
perf_event_exit_task+0x468/0xbb8
do_exit+0x690/0x1310
do_group_exit+0xd0/0x2b0
get_signal+0x2e8/0x17a8
do_signal+0x144/0x4f8
do_notify_resume+0x148/0x1e8
work_pending+0x8/0x14
which asserts that we only call pmu::read() on ACTIVE events.
The above callchain does:
perf_event_exit_task()
perf_event_exit_task_context()
task_ctx_sched_out() // INACTIVE
perf_event_exit_event()
perf_event_set_state(EXIT) // EXIT
sync_child_event()
perf_event_read_event()
perf_output_read()
perf_output_read_group()
leader->pmu->read()
Which results in doing a pmu::read() on an !ACTIVE event.
I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.
Still, adding this check makes it consistent with the @sub case for
the siblings.
Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Support to display the IPC/Cycle in 'annotate' TUI, for systems
where this info can be obtained, like Intel's >= Skylake (Jin Yao)
- Support wildcards on PMU name in dynamic PMU events (Agustin Vega-Frias)
- Display pmu name when printing unmerged events in stat (Agustin Vega-Frias)
- Auto-merge PMU events created by prefix or glob match (Agustin Vega-Frias)
- Fix s390 'call' operations target function annotation (Thomas Richter)
- Handle s390 PC relative load and store instruction in the augmented
'annotate', code, used so far in the TUI modes of 'perf report' and
'perf annotate' (Thomas Richter)
- Provide libtraceevent with a kernel symbol resolver, so that
symbols in tracepoint fields can be resolved when showing them in
tools such as 'perf report' (Wang YanQing)
- Refactor the cgroups code to look more like other code in tools/perf,
using cgroup__{put,get} for refcount operations instead of its
open-coded equivalent, breaking larger functions, etc (Arnaldo Carvalho de Melo)
- Implement support for the -G/--cgroup target in 'perf trace', allowing
strace like tracing (plus other events, backtraces, etc) for cgroups
(Arnaldo Carvalho de Melo)
- Update thread shortname in 'perf sched map' when the thread's COMM
changes (Changbin Du)
- refcount 'struct mem_info', for better sharing it over several
users, avoid duplicating structs and fixing crashes related to
use after free (Jiri Olsa)
- Display perf.data version, offsets in 'perf report --header' (Jiri Olsa)
- Record the machine's memory topology information in a perf.data
feature section, to be used by tools such as 'perf c2c' (Jiri Olsa)
- Fix output of forced groups in the header for 'perf report' --stdio
and --tui (Jiri Olsa)
- Better support llvm, clang, cxx make tests in the build process (Jiri Olsa)
- Streamline the 'struct perf_mmap' methods, storing some info in the
struct instead of passing it via various methods, shortening its
signatures (Kan Liang)
- Update the quipper perf.data parser library site information (Stephane Eranian)
- Correct perf's man pages title markers for asciidoctor (Takashi Iwai)
- Intel PT fixes and refactorings paving the way for implementing
support for AUX area sampling (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=cZ6w
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180308' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Support to display the IPC/Cycle in 'annotate' TUI, for systems
where this info can be obtained, like Intel's >= Skylake (Jin Yao)
- Support wildcards on PMU name in dynamic PMU events (Agustin Vega-Frias)
- Display pmu name when printing unmerged events in stat (Agustin Vega-Frias)
- Auto-merge PMU events created by prefix or glob match (Agustin Vega-Frias)
- Fix s390 'call' operations target function annotation (Thomas Richter)
- Handle s390 PC relative load and store instruction in the augmented
'annotate', code, used so far in the TUI modes of 'perf report' and
'perf annotate' (Thomas Richter)
- Provide libtraceevent with a kernel symbol resolver, so that
symbols in tracepoint fields can be resolved when showing them in
tools such as 'perf report' (Wang YanQing)
- Refactor the cgroups code to look more like other code in tools/perf,
using cgroup__{put,get} for refcount operations instead of its
open-coded equivalent, breaking larger functions, etc (Arnaldo Carvalho de Melo)
- Implement support for the -G/--cgroup target in 'perf trace', allowing
strace like tracing (plus other events, backtraces, etc) for cgroups
(Arnaldo Carvalho de Melo)
- Update thread shortname in 'perf sched map' when the thread's COMM
changes (Changbin Du)
- refcount 'struct mem_info', for better sharing it over several
users, avoid duplicating structs and fixing crashes related to
use after free (Jiri Olsa)
- Display perf.data version, offsets in 'perf report --header' (Jiri Olsa)
- Record the machine's memory topology information in a perf.data
feature section, to be used by tools such as 'perf c2c' (Jiri Olsa)
- Fix output of forced groups in the header for 'perf report' --stdio
and --tui (Jiri Olsa)
- Better support llvm, clang, cxx make tests in the build process (Jiri Olsa)
- Streamline the 'struct perf_mmap' methods, storing some info in the
struct instead of passing it via various methods, shortening its
signatures (Kan Liang)
- Update the quipper perf.data parser library site information (Stephane Eranian)
- Correct perf's man pages title markers for asciidoctor (Takashi Iwai)
- Intel PT fixes and refactorings paving the way for implementing
support for AUX area sampling (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Userspace RDPMC cannot possibly work for large PEBS, which was introduced in:
b8241d2069 ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)")
When the PEBS interrupt threshold is larger than one, there is no way
to get exact auto-reload times and value for userspace RDPMC. Disable
the userspace RDPMC usage when large PEBS is enabled.
The only exception is when the PEBS interrupt threshold is 1, in which
case user-space RDPMC works well even with auto-reload events.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Fixes: b8241d2069 ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)")
Link: http://lkml.kernel.org/r/1518474035-21006-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no way to get exact auto-reload times and values which are needed
for event updates unless we flush the PEBS buffer.
Introduce intel_pmu_auto_reload_read() to drain the PEBS buffer for
auto reload event. To prevent races with the hardware, we can only
call drain_pebs() when the PMU is disabled.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1518474035-21006-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a bug when reading event->count with large PEBS enabled.
Here is an example:
# ./read_count
0x71f0
0x122c0
0x1000000001c54
0x100000001257d
0x200000000bdc5
In fixed period mode, the auto-reload mechanism could be enabled for
PEBS events, but the calculation of event->count does not take the
auto-reload values into account.
Anyone who reads event->count will get the wrong result, e.g x86_pmu_read().
This bug was introduced with the auto-reload mechanism enabled since
commit:
851559e35f ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Introduce intel_pmu_save_and_restart_reload() to calculate the
event->count only for auto-reload.
Since the counter increments a negative counter value and overflows on
the sign switch, giving the interval:
[-period, 0]
the difference between two consequtive reads is:
A) value2 - value1;
when no overflows have happened in between,
B) (0 - value1) + (value2 - (-period));
when one overflow happened in between,
C) (0 - value1) + (n - 1) * (period) + (value2 - (-period));
when @n overflows happened in between.
Here A) is the obvious difference, B) is the extension to the discrete
interval, where the first term is to the top of the interval and the
second term is from the bottom of the next interval and C) the extension
to multiple intervals, where the middle term is the whole intervals
covered.
The equation for all cases is:
value2 - value1 + n * period
Previously the event->count is updated right before the sample output.
But for case A, there is no PEBS record ready. It needs to be specially
handled.
Remove the auto-reload code from x86_perf_event_set_period() since
we'll not longer call that function in this case.
Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Fixes: 851559e35f ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Link: http://lkml.kernel.org/r/1518474035-21006-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated
accordingly.
This is fine in current usage because no-one checks it - but fix it
for future code: for example, the drain_pebs() will be modified to
fix an auto-reload bug.
Properly save/restore the old PMU state.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: kernel test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/6f44ee84-56f8-79f1-559b-08e371eaeb78@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Large fixed period values could be truncated on Broadwell, for example:
perf record -e cycles -c 10000000000
Here the fixed period is 0x2540BE400, but the period which finally applied is
0x540BE400 - which is wrong.
The reason is that x86_pmu::limit_period() uses an u32 parameter, so the
high 32 bits of 'period' get truncated.
This bug was introduced in:
commit 294fe0f52a ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
It's safe to use u64 instead of u32:
- Although the 'left' is s64, the value of 'left' must be positive when
calling limit_period().
- bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch
the higher 32 bits.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 294fe0f52a ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/1519926894-3520-1-git-send-email-kan.liang@linux.intel.com
[ Rewrote unacceptably bad changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch updates the links to the Quipper library. It is now
available from GitHub and has been updated.
Reported-by: Lakshman Annadorai <lakshmana@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 has several load and store instructions with target operand
addressing relative to the program counter, for example lrl, lgrl, strl,
stgrl.
These instructions are handled similar to x86. Objdump output displays
those instructions as:
9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60>
This output is parsed (like on x86) and perf annotate shows those lines
as:
lgrl %r7,mp_+0x60
This patch handles the s390 specific instruction parsing for PC relative
load and store instructions.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that beautifiers wanting to resolve kernel function addresses to
names can do its work, and when we use "perf report" for output of "perf
kmem record", we will get kernel symbol output.
This patch affect the output of "perf report" for the record data
generated by "perf kmem record" looks like below:
Before patch:
0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
After patch:
0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180308032850.GA12383@udknight-ThinkPad-E550
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can see the output of feature compile in following files:
tools/build/feature/test-llvm.make.output
tools/build/feature/test-llvm-version.make.output
tools/build/feature/test-clang.make.output
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So they can follow the OUTPUT variable setup as the rest of the
features.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can see the status when we build perf, like:
$ make LIBCLANGLLVM=1 VF=1
... cxx: [ on ]
... llvm: [ on ]
... llvm-version: [ on ]
... clang: [ on ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have some .cpp files, make ctags/cscope aware of them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.
The format of data in MEM_TOPOLOGY is as follows:
0 - version | for future changes
8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
16 - count | number of nodes
For each node we store map of physical indexes for
each node:
32 - node id | node index
40 - size | size of bitmap
48 - bitmap | bitmap of memory indexes that belongs to node
| /sys/devices/system/node/node<NODE>/memory<INDEX>
The MEM_TOPOLOGY could be displayed with following
report command:
$ perf report --header-only -I
...
# memory nodes (nr 1, block size 0x8000000):
# 0 [7G]: 0-23,32-69
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to refcnt logic instead of duplicating mem_info objects. No
functional change, just saving some memory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's passed along several hists entries in --hierarchy mode, so it's
better we keep track of it.
The current fail I see is that it gets removed in hierarchy --mem-mode
mode, where it's shared in the different hierarchies, but removed from
the template hist entry, so the report crashes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-6-jolsa@kernel.org
[ Rename mem_info__aloc() to mem_info__new(), to fix the typo and use the convention for constructors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's no longer used.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's used far more down to be declared on the top of the __cmd_record.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display more header info from perf.data file, following values:
$ perf report -i perf.data --header-only
...
# header version : 1
# data offset : 424
# data size : 3364280
# feat offset : 3364704
It's handy for debuging.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the output header for reporting forced groups via --groups
option on non grouped events, like:
$ perf record -e 'cycles,instructions'
$ perf report --stdio --group
Before:
# Samples: 24 of event 'anon group { cycles:u, instructions:u }'
After:
# Samples: 24 of events 'cycles:u, instructions:u'
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: ad52b8cb48 ("perf report: Add support to display group output for non group events")
Link: http://lkml.kernel.org/r/20180307155020.32613-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' displays function call assembler instructions with a
right arrow. Hitting enter on this line/instruction causes the browser
to disassemble this target function and show it on the screen. On s390
this results in an error message 'The called function was not found.'
The function call assembly line parsing does not handle the s390 bras
and brasl instructions. Function call__parse expects the target as first
operand:
callq e9140 <__fxstat>
S390 has a register number as first operand:
brasl %r14,41d60 <abort>
Therefore the target addresses on s390 are always zero which is an
invalid address.
Introduce a s390 specific call parsing function which skips the first
operand on s390.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT code already has some preparation for AUX area sampling mode.
However the implementation has changed from the first proposal and one
of the side-effects is that it will not be impossible to support snapshot
mode and sampling mode at the same time.
Although there are no plans to support it, let validation (not yet
implemented) control whether it is allowed rather than low-level
functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_get_trace() fixes overlaps between the current buffer and the
previous buffer ('old_buffer').
However the previous buffer might not have had usable data (no PSB) so
the comparison must be made against the previous buffer that had usable
data.
Tidy that by keeping a pointer for that purpose in struct intel_pt_queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the new way sampling support will be implemented,
intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.
If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.
However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.
Suppress the estimate by setting timestamp_insn_cnt to zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.
The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.
That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments
to perf_mmap__read_init(). The data is stored in the struct perf_mmap.
Discard the parameters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument
to perf_mmap__read_event(). Discard them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite' argument to
perf_mmap__consume(). Discard it.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'overwrite' is set at allocation. It will not be changed. Using it
to replace the parameter of perf_mmap__consume(). The parameters will
be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the 'start', 'end' and 'overwrite' which are stored in
struct perf_mmap to replace the parameters of perf_mmap__read_event().
The parameters will be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa