The Shenzhen Aoni Electronic Co.,Ltd 2K FHD camera reports a UVC 1.10
version, but implements UVC 1.0a as shown by the UVC probe control being
26 bytes long. Force the UVC version for that device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Doncho Minkov <donchominkov@gmail.com>
Tested-by: Doncho Minkov <donchominkov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Syzbot discovered that the probe error handling doesn't clean up the
resources allocated in zr364xx_board_init(). There are several
related bugs in this code so I have re-written the error handling.
1) Introduce a new function zr364xx_board_uninit() which cleans up
the resources in zr364xx_board_init().
2) In zr364xx_board_init() if the call to zr364xx_start_readpipe()
fails then release the "cam->buffer.frame[i].lpvbits" memory
before returning. This way every function either allocates
everything successfully or it cleans up after itself.
3) Re-write the probe function so that each failure path goto frees
the most recent allocation. That way we don't free anything
before it has been allocated and we can also verify that
everything is freed.
4) Originally, in the probe function the "cam->v4l2_dev.release"
pointer was set to "zr364xx_release" near the start but I moved
that assignment to the end, after everything had succeeded. The
release function was never actually called during the probe cleanup
process, but with this change I wanted to make it clear that we
don't want to call zr364xx_release() until everything is
allocated successfully.
Next I re-wrote the zr364xx_release() function. Ideally this would
have been a simple matter of copy and pasting the cleanup code from
probe and adding an additional call to video_unregister_device(). But
there are a couple quirks to note.
1) The probe function does not call videobuf_mmap_free() and I don't
know where the videobuf_mmap is allocated. I left the code as-is to
avoid introducing a bug in code I don't understand.
2) The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe()
which is a change from the original behavior with regards to
unloading the driver. Calling zr364xx_stop_readpipe() on a stopped
pipe is not a problem so this is safe and is potentially a bugfix.
Reported-by: syzbot+b4d54814b339b5c6bbd4@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The event route for VIN running with a media controller (Gen3) is
incorrect as all events are only routed to the video device that are
used to register the async notifier.
Remedy this be examining which subdevice generated the event and route
it to all VIN(s) that are connected to that subdevice.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do not attempt to stop the streaming if the stream is not running.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
request_fd is validated under media_request_get_by_fd() just below this
check. Thus remove it.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Print capabilities field from struct v4l2_create_buffers for better
debugging.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When DEBUG is defined this error occurs
drivers/media/platform/pxa_camera.c:1410:7: error:
‘i’ undeclared (first use in this function)
for (i = 0; i < vb->num_planes; i++)
^
The variable 'i' is missing, so declare it.
Fixes: 6f28435d1c ("[media] media: platform: pxa_camera: trivial move of functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When DEBUG is defined this error occurs
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:306:41:
error: ‘i’ undeclared (first use in this function)
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[VENC_SYS]);
Reviewing the old line
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[i]);
All the i's need to be changed to VENC_SYS.
Fix a similar error for VENC_LT_SYS.
Fixes: 0dc4b32861 ("media: mtk-vcodec: venc: support SCP firmware")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function looks like a realloc.
However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.
[hverkuil: NULL != risc->cpu -> risc->cpu]
Fixes: 5ede94c705 ("[media] cx25821: remove bogus btcx_risc dependency)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A number of remote control drivers require the bitreverse
helper, and run into a link error when it is disabled:
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix to return a negative error code from the error handling case
instead of 0 in function qm1d1c0042_init(), as done elsewhere
in this function.
Fixes: ab4d14528f ("[media] em28xx: add support for PLEX PX-BCUD (ISDB-S)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
[hverkuil: fix checkpatch TAB indendation issues]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break and a return statements
instead of just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Print a message when the driver is removed so that we get some
visual confirmation when unbinding vidtv.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change from "vidtv_bridge" to simply "vidtv" so that vidtv looks
more similar to the other media virtual drivers in /sys/bus/platform.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reinstate sysfs bind attrs so that vidtv can be bound and unbound
via sysfs. This is useful for automated regression testing in
userspace.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add media controller support when CONFIG_MEDIA_CONTROLLER_DVB is set
so that, in the future, a test sequence in v4l-utils can be written
without having to know which /dev/fooX device should be used.
[mchehab: avoided usage of C99 comments]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 3d1387b3b8 ("media: vidtv: fix some warnings") replaced
the unused flexible array member at the end of struct vidtv_mpeg_ts
with a pointer. This broke the 188-byte alignment since the struct
no longer was 4 bytes in size.
Fix this by removing this field entirely.
Fixes: 3d1387b3b8 ("media: vidtv: fix some warnings")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PMT write function was refactored and this broke the CRC computation.
Fix it.
Fixes: db9569f67e ("media: vidtv: cleanup PMT write table function")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
By adding this cast '(__force __le16)' this sparse warning
is fixed:
drivers/media/i2c/ov02a10.c:391:19: warning: cast to restricted __le16
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/dvb-frontends/rtl2832.c:702 rtl2832_read_status() warn: missing error code 'ret'
'ret' is indeed not set, so set it to -EINVAL so a proper error
code is returned.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1040 rtl2832u_frontend_attach() warn: missing error code 'ret'
It is actually a bogus warning since in this particular case ret isn't
meant to be set. But by reworking the code a bit the code is actually
a lot more understandable and it fixes this warning.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this smatch warning:
drivers/media/pci/ivtv/ivtv-driver.c:900 ivtv_setup_pci() warn: 'itv->base_addr' not released on lines: 876.
One error path didn't release the memory regions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:829 c8sectpfe_probe() warn: missing error code 'ret'
Set ret to -EINVAL if the reset gpio was not found.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix two typos: dvdd -> dovdd and dvdd -> avdd
Both clearly copy-and-paste mistakes.
Fixes this smatch warning:
drivers/media/i2c/ov8865.c:2852 ov8865_probe() warn: passing zero to 'PTR_ERR'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/tuners/it913x.c:65 it913x_init() warn: missing error code 'ret'
Set ret to -EINVAL if the clock identifier was invalid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/platform/davinci/vpbe.c:632 vpbe_initialize() warn: missing error code 'ret'
The function returns 'ret', but instead 'err' was set to -ENOMEM.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a menu has more than 64 items, then don't check menu_skip_mask
for items 65 and up.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function is not necessary and largely a remnant of
dvb-usb workaround and is now controlled by dvb-usb-v2.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
lme2510_int_read is not atomically called so use GFP_KERNEL for
usb_alloc_urb and usb_submit_urb which is the first in the chain
of interrupt submissions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.
Replace the comma with a semicolon.
Fixes: 15e1ce3318 ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.
Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To save power, gate/reset the hardware block while the system is
asleep or powered off.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for adding suspend/resume hooks, factor out the hardware
initialization from the driver probe/remove functions.
The timeout programmed during init is taken from the `struct rc_dev` so
it is maintained across an exit/init cycle.
This resolves some trivial issues with the probe function: throwing away
the error from clk_prepare_enable and using the wrong type for the
temporary register value.
It also fixes the order of the remove function to unregister the RC
device before turning off the hardware. This prevents userspace from
triggering register writes (via LIRC_SET_REC_TIMEOUT) while the hardware
is disabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Only one register, SUNXI_IR_CIR_REG, is accessed from outside the
interrupt handler, and that register is not accessed from inside it.
As there is no overlap between different contexts, no lock is needed.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The register writes during driver removal occur after the device is
already put back in reset, so they never had any effect.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently on platforms designed for Windows, connections between CIO2 and
sensors are not properly defined in DSDT. This patch extends the ipu3-cio2
driver to compensate by building software_node connections, parsing the
connection properties from the sensor's SSDB buffer.
[Sakari Ailus: Make cio2_bridge_init static inline to a fix compiler
warning, wrapped a bunch of long lines.]
Suggested-by: Jordan Hand <jorhand@linux.microsoft.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 fwnode bus types are enumerated in v4l2-fwnode.c, meaning they aren't
available to the rest of the kernel. Move the enum to the corresponding
header so that I can use the label to refer to those values.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Where the fwnode graph is comprised of software_nodes, these will be
assigned as the secondary to dev->fwnode. Check the v4l2_subdev's fwnode
for a secondary and attempt to match against it during match_fwnode() to
accommodate that possibility.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
ipu3-cio2 driver needs extending with multiple files; rename the main
source file and specify the renamed file in Makefile to accommodate that.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add headers that ipu3-cio2.h is direct user of.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This solves a few minor cosmetic issues picked up by checkpatch for
the OV5648 and OV8865 drivers.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver can use the replacement API instead of calling
of_match_device() and then dereferencing the pointer that is returned.
This nicely avoids referencing the match table when it is undefined with
configurations where CONFIG_OF=n.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-media@vger.kernel.org>
Cc: <linux-renesas-soc@vger.kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-2-swboyd@chromium.org
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of an unconditional return 0, return no value. One of the two
callers ignored the return value already before.
This simplifies the next patch.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20210122092449.426097-3-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size cal_v4l2_async_subdev, otherwise access to
cal_v4l2_async_subdev->phy will go to unallocated memory.
Fixes: 8fcb7576ad ("media: ti-vpe: cal: Allow multiple contexts per subdev notifier")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following sparse warning:
drivers/media/platform/ti-vpe/cal-camerarx.c:783:32: warning: symbol 'cal_camerarx_media_ops' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for base layer priority ID control in encoder.
This is a preparation patch to support v6.
[hverkuil: changed 54 to 51 in v4l2_ctrl_handler_init]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This control indicates the priority id to be applied
to base layer.
[hverkuil: renumbered V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for frame type specific min and max qp controls
for encoder.
This is a preparation patch to support v6.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adds bitrate control for all coding layers for h264
same as hevc.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Adds min/max qp controls for B frame for h264.
- Adds min/max qp controls for I/P/B frames for hevc similar to h264.
- Update valid range of min/max qp for hevc to accommodate 10 bit.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GCC with W=2 level of kernel compiler warnings warns about the use of
uninitialised variables in a few locations. While these uninitialised
variables were not used in reality, this still produced compiler warnings.
Address this by assigning the variables to NULL and checking for NULL in
places it is not expected, returning -EIO in that case. This provides
at least some sanity checking at runtime as the compiler appears unable to
do that at compile time.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When processing a MCE_RSP_GETPORTSTATUS command, the bit index to set in
ir->txports_cabled comes from response data, and isn't validated.
As ir->txports_cabled is a u8, nothing should be done if the bit index
is greater than 7.
Cc: stable@vger.kernel.org
Reported-by: syzbot+ec3b3128c576e109171d@syzkaller.appspotmail.com
Signed-off-by: James Reynolds <jr@memlen.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This device is also supported.
Cc: stable@vger.kernel.org
Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now when everything is in place wire up buffer requirements
from hfi platform buffers to the buffer requirements helper.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Handle progressive/interlaced bitstream event by similar way as
bit depth.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Wire up hfi platform codec and capabilities instead of
getting them from firmware.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a new file for hfi platform buffer size and count calculations
for v6.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>From Venus v6 and beyond the buffer size and count have to be
calculated in the v4l2 driver instead of getting them from
firmware.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Starting from v6 we have one more hfi property which will be needed
to calculate buffer sizes/count for particular codec and session type.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add ops to get the supported by the platform codecs and capabilities.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now when we have hfi platform make venus capabilities an
hfi platform capabilities.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Introduce a new hfi platform to cover differences between hfi
versions. As a start move vpp/vsp freq data in that hfi
platform, more platform data will come later.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The core caps are filled but not used, delete them. In case we
need them we can re-introduce.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Skip calculating instance frequency if it is not in running state.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For resolutions below 720p the size of the compressed buffer must
be bigger. Correct this by checking the resolution when calculating
buffer size and multiply by eight.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hfi_session_init can be called many times and it returns
EINVAL when the session was already initialized. This error code
(EINVAL) is confusing for the callers. Change hfi_session_init to
return EALREADY error code when the session has been already
initialized.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For synchronous commands, update the message queue variable.
This would inform video firmware to raise interrupt on host
CPU whenever there is a response for such commands.
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently we rely on firmware to return error when we reach the maximum
supported number of sessions. But this errors are happened at reqbuf
time which is a bit later. The more reasonable way looks like is to
return the error on driver open.
To achieve that modify hfi_session_create to return error when we reach
maximum count of sessions and thus refuse open.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Init the hfi session only once in queue_setup and also cover that
with inst->lock.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the DRC is near the end of the stream the client
may send a V4L2_DEC_CMD_STOP before the DRC occurs.
V4L2_DEC_CMD_STOP puts the driver into the
VENUS_DEC_STATE_DRAIN state. DRC must be aware so
that after the DRC event the state can be restored
correctly.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DRC events can happen virtually at anytime, including when we are
starting a seek. Should this happen, we must make sure to return to the
DRC state, otherwise the firmware will expect buffers of the new
resolution whereas userspace will still work with the old one.
Returning to the DRC state upon resume for seeking makes sure that the
client will get the DRC event and will reallocate the buffers to fit the
firmware's expectations.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After adding more logic in vdec buf_queue vb2 op it is not
practical to have two lock/unlock for one decoder buf_queue.
So move the instance lock in encoder and decoder vb2 buf_queue
operations.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This makes the decoder to behaives equally for sufficient and
insufficient events. After this change the LAST buffer flag will be set
when the new resolution (in dynamic-resolution-change state) is smaller
then the old bitstream resolution.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In real use of dynamic-resolution-change it is observed that the
LAST buffer flag (which marks the last decoded buffer with the
resolution before the resolution-change event) is not reliably set.
Fix this by set the LAST buffer flag on next queued capture buffer
after the resolution-change event.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver uses the SG vb2 ops, but effectively only ever accesses the
first entry of the SG table, indicating that it expects a flat layout.
Switch it to use the contiguous ops to make sure this expected invariant
is always enforced. Since the device is supposed to be behind an IOMMU
this should have little to none practical consequences beyond making the
driver not rely on a particular behavior of the SG implementation.
Reported-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: d2b4387f3b ("media: platform: Add Aspeed Video Engine driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When usb_clear_halt() fails, dvb->bulk_urb->transfer_buffer
and dvb->bulk_urb should be freed just like when
usb_submit_urb() fails.
Fixes: 3169c9b26f ("V4L/DVB (12788): tm6000: Add initial DVB-T support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When vb2_queue_init() fails, dev->empress_dev
should be released just like other error handling
paths.
Fixes: 2ada815fc4 ("[media] saa7134: convert to vb2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When kzalloc() fails, em28xx_uninit_usb_xfer() will free
usb_bufs->buf and set it to NULL. Thus the later access
to usb_bufs->buf[i] will lead to null pointer dereference.
Also the kfree(usb_bufs->buf) after that is redundant.
Fixes: d571b592c6 ("media: em28xx: don't use coherent buffer for DMA transfers")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Comment has 'then' repeated twice. Let's clean it up.
Use unsigned int to maintain naming consistency.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
These entries can only ever be single bits. Make use of the BIT macro
accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement the VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl for the isp entity,
check if the mbus code is valid for the given pad.
This call is not available for the parameter or metadata pads of the
RkISP1.
Signed-off-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com>
Acked-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 4c62e9764a ("Drivers: media: remove __dev*
attributes.") in v3.8, the SuperH Video Output Unit driver no longer has
any code or data located in initmem, hence there is no need to annotate
the sh_vou structure with __refdata. Drop the annotation, to avoid
suppressing future section warnings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This error path returns success but it should return -EINVAL.
Fixes: cba3819d1e ("media: camss: Format configuration per hardware version")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This test has a problem because we want to know if "k" is -1 or a
positive value less than "f->index". But the "f->index" variable is a
u32 so if "k == -1" then -1 gets type promoted to UINT_MAX which is
larger than "f->index". I've added an explicit test to check for -1.
Fixes: a3d412d4b9 ("media: Revert "media: camss: Make use of V4L2_CAP_IO_MC"")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: dea42fb79f ("media: mtk-vcodec: reset segment data then trig decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
FIELD_GET() must only be used with a mask that is a compile-time
constant:
drivers/media/platform/ti-vpe/cal.h: In function 'cal_read_field':
include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_247' declared with attribute error: FIELD_GET: mask is not constant
include/linux/bitfield.h:46:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
46 | BUILD_BUG_ON_MSG(!__builtin_constant_p(_mask), \
| ^~~~~~~~~~~~~~~~
drivers/media/platform/ti-vpe/cal.h:220:9: note: in expansion of macro 'FIELD_GET'
220 | return FIELD_GET(mask, cal_read(cal, offset));
| ^~~~~~~~~
The problem here is that the function is not always inlined. Mark it
__always_inline to avoid the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
struct device is used in ccs-data.h but no definition is included. Add a
forward definition.
Also ccs-data.c includes linux/types.h but this is already included in
ccs-data.h which ccs-data.c includes. Do don't include linux/types.h in
ccs-data.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit b3c0115e34.
As per Documentation/process/license-rules.rst "GPL v2" exists only for
historical reasons and has the same meaning as "GPL". So revert this
patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The preferred integer types in the kernel are the Linux specific ones,
switch from standard C types to u32 and alike.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The preferred integer types in the kernel are the Linux specific ones,
switch from standard C types to u32 and alike.
The patch has been produced with the following Coccinelle spatch, with few
alignment adjustments:
@@
typedef uint32_t;
typedef u32;
@@
- uint32_t
+ u32
@@
typedef uint16_t;
typedef u16;
@@
- uint16_t
+ u16
@@
typedef uint8_t;
typedef u8;
@@
- uint8_t
+ u8
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CCS supports three variants of PHY timing control, auto, UI based and
manual. The driver previously assumed UI based control that requires
updating the link rate to the sensor. Now default to automatic control
instead, and only write the link rate to the sensor in UI mode.
If neither auto or UI control is supported, return an error in probe.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver depends on the external clock frequency. Add a sanity check for
the frequency, by returning an error from probe if it's zero.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A CCS compliant device requires a delay before the first I²C transaction
after pulling xshutdown up or starting the external clock. This is what
the driver does. However, if neither is actually there, there's no need
for the delay.
This also has the effect of removing an unnecessary delay on ACPI systems
where ACPI is responsible for the power-up sequence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Verify the software reset has been completed until proceeding.
The spec does not guarantee a delay but presumably 100 ms should be
enough.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver always used software reset after the sensor's power sequence
that includes a hardware reset if we have a reset GPIO. Do not use
software reset if we just brought the sensor up from hardware reset state.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sensor's address was changed before resetting and changing the
address again. Don't do it before reset as it's useless.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Get the first endpoint from port 0 instead of the next one, whatever it
might be. There are no other ports so there's no functional change.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Also print out MSR registers written to the sensor. This isn't entirely
optimal as the debug strings are produced even if they're not used but
that isn't really a grave issue --- the I²C bus is very slow anyway.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CCS spec defines an alternative implementation for global analogue
gain. Add support for that in the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add four controls for reading CCS analogue gain coefficients. The
values are constants that are device specific.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some devices do not implement analogue gain this way. Only add the control
when a device does have the support.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The analogue gain control was stored to the device specific struct but was
never used. Remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SMIA only has per-component digital gain. Add support for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CCS supports global (all-component) digital gain. Add support for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drivers don't need to explicitly call devm_{}_put on driver
removal, as it's automatically called by the device driver
resource management code.
Fixes: aab7ed1c39 ("media: i2c: Add driver for Aptina MT9V111")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The OV8865 is a 8 Mpx CMOS image sensor producing 3264x2448 at 30 fps.
Other modes (including some with sub-sampling) are available too.
It outputs 10-bit bayer CFA data through a MIPI CSI-2 interface with
up to 4 lanes supported.
Some register initialisation sequences are still needed for this driver,
as they cover registers for which no documentation is available.
This work is based on the first version of the driver submitted by
Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP.
This version is a rewrite of the first version that matches the structure
of the OV5648 driver, with explicit PLL configuration, all the necessary
mode-specific fields, associatied registers and reduced static sequences.
It was tested with the Banana Pi Camera Board v3 and the Banana Pi M3.
Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The OV5648 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2
in a one or two lane configuration.
Most of the features of the hardware are supported, including:
- Auto and manual exposition/gain
- Auto and manual white balance
- Horizontal and vertical flip
- Test patterns
But the following are still missing:
- Debanding, based on power source frequency;
- Exposition setting correlated to time units.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Loop was useless as it would always exit on the first iteration. Fix
it with right condition.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Fixes: a86cf9b29e ("media: ipu3-cio2: Validate mbus format in setting subdev format")
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v4.16 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver currently reports a single supported value for
V4L2_CID_PIXEL_RATE and initializes the control's minimum value to 0,
which is very risky, as userspace might accidentally use it as divider
when calculating the time duration of a line.
Fix this by using as minimum the only supported value when registering
the control.
Fixes: 5de35c9b8d ("media: i2c: Add Omnivision OV5670 5M sensor support")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to the original code in the driver it was never assumed to work
with big page sizes: unsigned short type followed by PAGE_SHIFT and
PAGE_MASK which may be different on non-x86 architectures.
Recently LKP found an issue on non-x86 architectures due to above
mentioned limitations. Since Sakari acknowledges that it's not really
useful to be able to compile this elsewhere, mark it x86 only.
Fixes: a31d19f889 ("media: ipu3: allow building it with COMPILE_TEST on non-x86 archs")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
kvmalloc() was used to allocate the temporary memory buffer that was used
to contain both the IOCTL argument as well as a possible array argument
that could have been large. Now that the two are separated, the IOCTL
argument is known to be small in size. Use kmalloc to allocate it instead
of kvmalloc. Similarly for releasing it.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When an IOCTL with argument size larger than 128 that also used array
arguments were handled, two memory allocations were made but alas, only
the latter one of them was released. This happened because there was only
a single local variable to hold such a temporary allocation.
Fix this by adding separate variables to hold the pointers to the
temporary allocations.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com
Fixes: d14e6d76eb ("[media] v4l: Add multi-planar ioctl handling code")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Capturing in 640x480 SBGGR8_1X8 hangs the system when capturing
with the unicam driver on RaspberryPi 4 platform.
Remove it and remove the support for multiple media bus codes in
the driver.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver reports the V4L2_SUBDEV_FL_HAS_EVENTS flag but does not
support subscribing and unsubscribing to events.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make the two register-value lists const.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use pm_runtime_get_if_in_use() in s_ctrl to apply controls
only when the device is powered on.
Rework the control set function to balance the
pm_runtime_get_if_in_use() call with
pm_runtime_put() at the end of the function.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework the s_stream() operation to turn the sensor on and
off at stream enable/disable time using the pm_runtime infrastructure.
Protect the stream on/off from being called multiple times in
sequence with a 'streaming' flag.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the pm_runtime framework to replace the legacy s_power() operation.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Exposure is clipped by the VTS of the mode, so it needs to be updated
when this is changed.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart