Virtio PCI supports new parameter sizes of find_vqs().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-35-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We can simply reuse vp_synchronize_vectors() for .synchronize_cbs().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220527060120.20964-5-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
This patch addresses the checkpatch.pl warning where unsigned int is
preferred over unsigned.
Signed-off-by: Solomon Tan <solomonbstoner@protonmail.ch>
Message-Id: <YlzS49Wo8JMDhKOt@ArchDesktop>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 9e35276a53. Issue
were reported for the drivers that are using affinity managed IRQ
where manually toggling IRQ status is not expected. And we forget to
enable the interrupts in the restore path as well.
In the future, we will rework on the interrupt hardening.
Fixes: 9e35276a53 ("virtio_pci: harden MSI-X interrupts")
Reported-by: Marc Zyngier <maz@kernel.org>
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220323031524.6555-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The error message on the failure of pfn check should tell
virtio-pci rather than virtio-mmio, just fix it.
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/ae5e154e-ac59-f0fa-a7c7-091a2201f581@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to synchronize pending MSI-X irq handlers via
synchronize_irq(), this may not work for the untrusted device which
may keep sending interrupts after reset which may lead unexpected
results. Similarly, we should not enable MSI-X interrupt until the
device is ready. So this patch fixes those two issues by:
1) switching to use disable_irq() to prevent the virtio interrupt
handlers to be called after the device is reset.
2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready()
This can make sure the virtio interrupt handler won't be called before
virtio_device_ready() and after reset.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2 or
later see the copying file in the top level directory
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 6 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075210.858783702@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIRTIO_PCI_CONFIG() is deprecated. Use VIRTIO_PCI_CONFIG_OFF() instead.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy PCI over virtio uses a 32bit PFN for the queue. If the
queue pfn is too large to fit in 32bits, which we could hit on
arm64 systems with 52bit physical addresses (even with 64K page
size), we simply miss out a proper link to the other side of
the queue.
Add a check to validate the PFN, rather than silently breaking
the devices.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Cc: Peter Maydel <peter.maydell@linaro.org>
Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allows maintaining extra context per vq. For ease of use, passing in
NULL is legal and disables the feature for all vqs.
Includes fixes by Christian for s390, acked by Cornelia.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 5c34d002dc.
Conflicts:
drivers/virtio/virtio_pci_common.c
The cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.
This reverts the cleanup changes but keeps the affinity support.
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 53a020c661.
The cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This basically passed up the pci_irq_get_affinity information through
virtio through an optional get_vq_affinity method. It is only implemented
by the PCI backend for now, and only when we use per-virtqueue IRQs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't really need struct virtio_pci_vq_info, as most field in there
are redundant:
- the vq backpointer is not strictly neede to start with
- the entry in the vqs list is not needed - the generic virtqueue already
has list, we only need to check if it has a callback to get the same
semantics
- we can use a simple array to look up the MSI-X vec if needed.
- That simple array now also duoble serves to replace the per_vq_vectors
flag
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy virtio defines the virtqueue base using a 32-bit PFN field, with
a read-only register indicating a fixed page size of 4k.
This can cause problems for DMA allocators that allocate top down from
the DMA mask, which is set to 64 bits. In this case, the addresses are
silently truncated to 44-bit, leading to IOMMU faults, failure to read
from the queue or data corruption.
This patch restricts the coherent DMA mask for legacy PCI virtio devices
to 44 bits, which matches the specification.
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Benjamin Serebrin <serebrin@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This switches to vring_create_virtqueue, simplifying the driver and
adding DMA API support.
This fixes virtio-pci on platforms and busses that have IOMMUs. This
will break the experimental QEMU Q35 IOMMU support until QEMU is
fixed. In exchange, it fixes physical virtio hardware as well as
virtio-pci running under Xen.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move resource allocation from common code to legacy and modern code.
Only request resources actually used, i.e. bar0 in legacy mode and
the bar(s) specified by capabilities in modern mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most of initialization is device-independent.
Let's move it to common.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Device VQs were getting freed twice: once in every device's removal
functions, and then again in virtio_pci_legacy_remove(). The ones in
devices are called first, so drop the useless second call.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The reason we defer kfree until release function is because it's a
general rule for kobjects: kfree of the reference counter itself is only
legal in the release function.
Previous patch didn't make this clear, document this in code.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A struct device which has just been unregistered can live on past the
point at which a driver decides to drop it's initial reference to the
kobject gained on allocation.
This implies that when releasing a virtio device, we can't free a struct
virtio_device until the underlying struct device has been released,
which might not happen immediately on device_unregister().
Unfortunately, this is exactly what virtio pci does:
it has an empty release callback, and frees memory immediately
after unregistering the device.
This causes an easy to reproduce crash if CONFIG_DEBUG_KOBJECT_RELEASE
it enabled.
To fix, free the memory only once we know the device is gone in the release
callback.
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It turns out we need to add device-specific code
in release callback. Move it to virtio_pci_legacy.c.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
kbuild does not seem to like it when we name source
files same as the module.
Let's rename virtio_pci -> virtio_pci_common,
and get rid of #include-ing c files.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move everything dealing with legacy devices out to virtio_pci_legacy.c.
Expose common code APIs in virtio_pci.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo