Some apple controllers use the command id as an index to implementation
specific data structures and will fail if the value is out of bounds.
The nvme driver's recently introduced command sequence number breaks
this controller.
Provide a quirk so these spec incompliant controllers can function as
before. The driver will not have the ability to detect bad completions
when this quirk is used, but we weren't previously checking this anyway.
The quirk bit was selected so that it can readily apply to stable.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509
Cc: Sven Peter <sven@svenpeter.dev>
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various places in the nvme code that rely on ctrl->namespace to be
ordered. Ensure that the namespae is inserted into the list at the
right position from the start instead of sorting it after the fact.
Fixes: 540c801c65 ("NVMe: Implement namespace list scanning")
Reported-by: Anton Eidelman <anton.eidelman@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
When the controller sends us multiple r2t PDUs in a single
request we need to account for it correctly as our send/recv
context run concurrently (i.e. we get a new r2t with r2t_offset
before we updated our iterator and req->data_sent marker). This
can cause wrong offsets to be sent to the controller.
To fix that, we will first know that this may happen only in
the send sequence of the last page, hence we will take
the r2t_offset to the h2c PDU data_offset, and in
nvme_tcp_try_send_data loop, we make sure to increment
the request markers also when we completed a PDU but
we are expecting more r2t PDUs as we still did not send
the entire data of the request.
Fixes: 825619b09a ("nvme-tcp: fix possible use-after-completion")
Reported-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Tested-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the freeze/unfreeze around changes to the number of hardware
queues. Study and retest has indicated there are no ios that can be
active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path
in __nvme_fc_abort_outstanding_ios.
This patch primarily reverts 88e837ed0f "nvme-fc: wait for queues to
freeze before calling update_hr_hw_queues". It's not an exact revert as
it leaves the adjusting of hw queues only if the count changes.
Signed-off-by: James Smart <jsmart2021@gmail.com>
[dwagner: added explanation why no IO is pending]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic
as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time
out and tear down". There is no teardown_lock in nvme-fc.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case the number of hardware queues changes, we need to update the
tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation
will fail (target will reject the connect call due to the wrong number
of queues) and hence we bail out of the recreate function. Then we
will to try the very same operation again, thus we don't make any
progress.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- fix ANA state updates when a namespace is not present (Anton Eidelman)
- nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show
(Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu Li)
-----BEGIN PGP SIGNATURE-----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=wad8
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme into block-5.15
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.15
- fix ANA state updates when a namespace is not present (Anton Eidelman)
- nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show
(Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu Li)"
* tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme:
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
There is no need to explicitly unregister the integrity profile when
deleting the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dispatching requests inline with the .queue_rq() call may block while
holding the send_mutex. If the tcp io_work also happens to schedule, it
may see the req_list is non-empty, leaving "pending" true and remaining
in TASK_RUNNING. Since io_work is of higher scheduling priority, the
.queue_rq task may not get a chance to run, blocking forward progress
and leading to io timeouts.
Instead of checking for pending requests within io_work, let the queueing
restart io_work outside the send_mutex lock if there is more work to be
done.
Fixes: a0fdd14180 ("nvme-tcp: rerun io_work if req_list is not empty")
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id.
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:
NSIDs in ctrl->namespaces: 1, 3, 4
NSIDs in desc->nsids: 1, 2, 3, 4
Loop iteration 0:
ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.
Where the update to the ANA state of NSID 3 is missed. To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
When we remove the siblings entry, we update ns->head->list, hence we
can't separate the removal and test for being empty. They have to be
in the same critical section to avoid a race.
To avoid breaking the refcounting imbalance again, add a list empty
check to nvme_find_ns_head.
Fixes: 5396fdac56 ("nvme: fix refcounting imbalance when all paths are down")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This was intended to limit the number of characters printed from
"subsys->serial" to NVMET_SN_MAX_SIZE. But accidentally the width
specifier was used instead of the precision specifier so it only
affects the alignment and not the number of characters printed.
Fixes: f04064814c ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nmve_mpath_clear_current_path returns true if the current
path has changed. In this case we have to wait for all concurrent
submissions to finish. But if we didn't change the current path, there
is no point in waiting for another RCU period to finish.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently the connection between host and NVMe-oF target gets
disconnected by keep-alive timeout when a user connects to a target
with a relatively large kato value and then sets the smaller kato
with a set features command (e.g. connects with 60 seconds kato value
and then sets 10 seconds kato value).
The cause is that keep alive command interval on the host, which is
defined as unsigned int kato in nvme_ctrl structure, does not follow
the kato value changes.
This patch updates the keep alive interval in the following steps when
the kato is modified by a set features command: stops the keep alive
work queue, then sets the kato as new timer value and re-start the queue.
Signed-off-by: Tatsuya Sasaki <tatsuya6.sasaki@kioxia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The spec says
7.4.6.1 Digest Error handling
When a host detects a data digest error in a C2HData PDU, that host
shall continue processing C2HData PDUs associated with the command and
when the command processing has completed, if a successful status was
returned by the controller, the host shall fail the command with a
non-fatal transport error.
Currently the transport is reseted when a data digest error is
detected. Instead, when a digest error is detected, mark the final
status as NVME_SC_DATA_XFER_ERROR and let the upper layer handle
the error.
In order to keep track of the final result maintain a status field in
nvme_tcp_request object and use it to overwrite the completion queue
status (which might be successful even though a digest error has been
detected) when completing the request.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The serial number is copied into the buffer via memcpy_and_pad()
with the length NVMET_SN_MAX_SIZE. So when printing out we also
need to take just that length as anything beyond that will be
uninitialized.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The target core code never needs the host-side nvme_ctrl structure.
Open code two uses of nvmet_is_passthru_req in passthru.c, and then
switch the helpers used by the core to return bool. Also rename the
fuctions to better match their usage:
nvmet_passthru_ctrl -> nvmet_is_passthru_subsys
nvmet_req_passthru_ctrl -> nvmet_is_passthru_req
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
For a passthru controller make cap initialization dependent on the cap of
the passthru controller, given that multiple Command Set support needs
to be supported by the underlying controller. For that move the
initialization of CAP later so that it can use the fully initialized
nvmet_ctrl structure.
Fixes: ab5d0b38c0 (nvmet: add Command Set Identifier support)
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: refactored the code a bit to keep it more contained in passthru.c]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Preparatory patch in order to reuse nvme_multi_css in the nvme target
code.
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When triggering a rescan due to a namespace resize we will be
receiving AENs on every controller, triggering a rescan of all
attached namespaces. If multipath is active only the current path and
the ns_head disk will be updated, the other paths will still refer to
the old size until AENs for the remaining controllers are received.
If I/O comes in before that it might be routed to one of the old
paths, triggering an I/O failure with 'access beyond end of device'.
With this patch the old paths are skipped from multipath path
selection until the controller serving these paths has been rescanned.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: - introduce NVME_NS_READY flag instead of NVME_NS_INVALIDATE
- use 'revalidate' instead of 'invalidate' which
follows the zoned device code path.
- clear NVME_NS_READY before clearing current_path]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme multipathing code just dispatches bios to one of the blk-mq
based paths and never blocks on its own, so set QUEUE_FLAG_NOWAIT
to support REQ_NOWAIT bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=4uWF
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
Switch to use the blk_mq_alloc_disk helper for allocating the
request_queue and gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210816131910.615153-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These values are unused now that the lightnvm support is gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Now that the lightnvm driver is removed, we don't need a pointer to it's
now non-existent struct.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Transport drivers need both core and fabrics modules, instead of
selecting both, have the selection transitive such that NVME_FABRICS
selects NVME_CORE and transport drivers select NVME_FABRICS.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Check that host sqsize is not greater-than Maximum Queue Entries
Supported (MQES) value supported by the controller.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the NVMe specification, if the host sends a Connect command
specifying a queue id which has already been created, a status value of
NVME_SC_CMD_SEQ_ERROR is returned.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the NVMe specification, the response dword 0 value of the
Connect command is based on status code: return cntlid for successful
compeltion return IPO and IATTR for connect invalid parameters. Fix
a missing error information for a zero sized queue, and return the
cntlid also for I/O queue Connect commands.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We update ctrl->queue_count and schedule another reconnect when io queue
count is zero.But we will never try to create any io queue in next reco-
nnection, because ctrl->queue_count already set to zero.We will end up
having an admin-only session in Live state, which is exactly what we try
to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We update ctrl->queue_count and schedule another reconnect when io queue
count is zero.But we will never try to create any io queue in next reco-
nnection, because ctrl->queue_count already set to zero.We will end up
having an admin-only session in Live state, which is exactly what we try
to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Each mutex_init() should have a corresponding mutex_destroy().
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The NVMe host memory buffer may consume a non-negligable amount of
memory. Controllers are required to function without the host memory
buffer enabled, but with possibly degraded performance. Export a sysfs
property to toggle this feature on a per-device granularity so users may
choose to reclaim memory at the expense of storage performance.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
An idle suspend may or may not disable host memory access from devices
placed in low power mode. Either way, it should always be safe to
disable the host memory buffer prior to entering the low power mode, and
this should also always be faster than a full device shutdown.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are two occurrances where variable status is being assigned a
value that is never read and it is being re-assigned a new value
almost immediately afterwards on an error exit path. The assignments
are redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Opts->host is NULL there. It is checked just before. So remove
nvmf_host_put. It is introduced by commit 59a2f3f00f ("nvme: fix
potential memory leak in option parsing").
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
An attribute should only be exporting one value as recommended in
Documentation/filesystems/sysfs.rst. Implement CMB attributes this way.
The old attribute will remain for backward compatibility.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Appending sysfs files to the controller kobject is a bit clunky and
becomes a maintenance problem as more attributes are added. The
attribute group infrastructure handles this better, so use that.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We cannot detect a (perhaps buggy) controller that is sending us
a completion for a request that was already completed (for example
sending a completion twice), this phenomenon was seen in the wild
a few times.
So to protect against this, we use the upper 4 msbits of the nvme sqe
command_id to use as a 4-bit generation counter and verify it matches
the existing request generation that is incrementing on every execution.
The 16-bit command_id structure now is constructed by:
| xxxx | xxxxxxxxxxxx |
gen request tag
This means that we are giving up some possible queue depth as 12 bits
allow for a maximum queue depth of 4095 instead of 65536, however we
never create such long queues anyways so no real harm done.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We already validate it when receiving the c2hdata pdu header
and this is not changing so this is a redundant check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We are going to use the upper 4-bits of the command_id for a generation
counter, so enforce the new queue depth upper limit. As we enforce
both min and max queue depth, use param_set_uint_minmax istead of
open coding it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing
the block layer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Early probe failure never reaches nvme_ns_remove, so GENHD_FL_UP must
be set at this point. Remove the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch