Commit Graph

5 Commits

Author SHA1 Message Date
Sergey Senozhatsky e02d238c98 zram/zcomp: do not zero out zcomp private pages
Do not __GFP_ZERO allocated zcomp ->private pages.  We keep allocated
streams around and use them for read/write requests, so we supply a
zeroed out ->private to compression algorithm as a scratch buffer only
once -- the first time we use that stream.  For the rest of IO requests
served by this stream ->private usually contains some temporarily data
from the previous requests.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 11:40:52 -08:00
Minchan Kim 75d8947a36 zram: pass gfp from zcomp frontend to backend
Each zcomp backend uses own gfp flag but it's pointless because the
context they could be called is driven by upper layer(ie, zcomp
frontend).  As well, zcomp frondend could call them in different
context.  One context(ie, zram init part) is it should be better to make
sure successful allocation other context(ie, further stream allocation
part for accelarating I/O speed) is just optional so let's pass gfp down
from driver (ie, zcomp frontend) like normal MM convention.

[sergey.senozhatsky@gmail.com: add missing __vmalloc zero and highmem gfps]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 11:40:51 -08:00
Kyeongdon Kim d913897aba zram: try vmalloc() after kmalloc()
When we're using LZ4 multi compression streams for zram swap, we found
out page allocation failure message in system running test.  That was
not only once, but a few(2 - 5 times per test).  Also, some failure
cases were continually occurring to try allocation order 3.

In order to make parallel compression private data, we should call
kzalloc() with order 2/3 in runtime(lzo/lz4).  But if there is no order
2/3 size memory to allocate in that time, page allocation fails.  This
patch makes to use vmalloc() as fallback of kmalloc(), this prevents
page alloc failure warning.

After using this, we never found warning message in running test, also
It could reduce process startup latency about 60-120ms in each case.

For reference a call trace :

    Binder_1: page allocation failure: order:3, mode:0x10c0d0
    CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20
    Call trace:
      dump_backtrace+0x0/0x270
      show_stack+0x10/0x1c
      dump_stack+0x1c/0x28
      warn_alloc_failed+0xfc/0x11c
      __alloc_pages_nodemask+0x724/0x7f0
      __get_free_pages+0x14/0x5c
      kmalloc_order_trace+0x38/0xd8
      zcomp_lz4_create+0x2c/0x38
      zcomp_strm_alloc+0x34/0x78
      zcomp_strm_multi_find+0x124/0x1ec
      zcomp_strm_find+0xc/0x18
      zram_bvec_rw+0x2fc/0x780
      zram_make_request+0x25c/0x2d4
      generic_make_request+0x80/0xbc
      submit_bio+0xa4/0x15c
      __swap_writepage+0x218/0x230
      swap_writepage+0x3c/0x4c
      shrink_page_list+0x51c/0x8d0
      shrink_inactive_list+0x3f8/0x60c
      shrink_lruvec+0x33c/0x4cc
      shrink_zone+0x3c/0x100
      try_to_free_pages+0x2b8/0x54c
      __alloc_pages_nodemask+0x514/0x7f0
      __get_free_pages+0x14/0x5c
      proc_info_read+0x50/0xe4
      vfs_read+0xa0/0x12c
      SyS_read+0x44/0x74
    DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB
         0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB

[minchan@kernel.org: change vmalloc gfp and adding comment about gfp]
[sergey.senozhatsky@gmail.com: tweak comments and styles]
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 11:40:51 -08:00
Sergey Senozhatsky 3d5fe03a3e zram/zcomp: use GFP_NOIO to allocate streams
We can end up allocating a new compression stream with GFP_KERNEL from
within the IO path, which may result is nested (recursive) IO
operations.  That can introduce problems if the IO path in question is a
reclaimer, holding some locks that will deadlock nested IOs.

Allocate streams and working memory using GFP_NOIO flag, forbidding
recursive IO and FS operations.

An example:

  inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
  git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (jbd2_handle){+.+.?.}, at:  start_this_handle+0x4ca/0x555
  {IN-RECLAIM_FS-W} state was registered at:
     __lock_acquire+0x8da/0x117b
     lock_acquire+0x10c/0x1a7
     start_this_handle+0x52d/0x555
     jbd2__journal_start+0xb4/0x237
     __ext4_journal_start_sb+0x108/0x17e
     ext4_dirty_inode+0x32/0x61
     __mark_inode_dirty+0x16b/0x60c
     iput+0x11e/0x274
     __dentry_kill+0x148/0x1b8
     shrink_dentry_list+0x274/0x44a
     prune_dcache_sb+0x4a/0x55
     super_cache_scan+0xfc/0x176
     shrink_slab.part.14.constprop.25+0x2a2/0x4d3
     shrink_zone+0x74/0x140
     kswapd+0x6b7/0x930
     kthread+0x107/0x10f
     ret_from_fork+0x3f/0x70
  irq event stamp: 138297
  hardirqs last  enabled at (138297):  debug_check_no_locks_freed+0x113/0x12f
  hardirqs last disabled at (138296):  debug_check_no_locks_freed+0x33/0x12f
  softirqs last  enabled at (137818):  __do_softirq+0x2d3/0x3e9
  softirqs last disabled at (137813):  irq_exit+0x41/0x95

               other info that might help us debug this:
   Possible unsafe locking scenario:
         CPU0
         ----
    lock(jbd2_handle);
    <Interrupt>
      lock(jbd2_handle);

                *** DEADLOCK ***
  5 locks held by git/20158:
   #0:  (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b
   #1:  (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3
   #2:  (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b
   #3:  (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b
   #4:  (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555

               stack backtrace:
  CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211
  Call Trace:
    dump_stack+0x4c/0x6e
    mark_lock+0x384/0x56d
    mark_held_locks+0x5f/0x76
    lockdep_trace_alloc+0xb2/0xb5
    kmem_cache_alloc_trace+0x32/0x1e2
    zcomp_strm_alloc+0x25/0x73 [zram]
    zcomp_strm_multi_find+0xe7/0x173 [zram]
    zcomp_strm_find+0xc/0xe [zram]
    zram_bvec_rw+0x2ca/0x7e0 [zram]
    zram_make_request+0x1fa/0x301 [zram]
    generic_make_request+0x9c/0xdb
    submit_bio+0xf7/0x120
    ext4_io_submit+0x2e/0x43
    ext4_bio_write_page+0x1b7/0x300
    mpage_submit_page+0x60/0x77
    mpage_map_and_submit_buffers+0x10f/0x21d
    ext4_writepages+0xc8c/0xe1b
    do_writepages+0x23/0x2c
    __filemap_fdatawrite_range+0x84/0x8b
    filemap_flush+0x1c/0x1e
    ext4_alloc_da_blocks+0xb8/0x117
    ext4_rename+0x132/0x6dc
    ? mark_held_locks+0x5f/0x76
    ext4_rename2+0x29/0x2b
    vfs_rename+0x540/0x636
    SyS_renameat2+0x359/0x44d
    SyS_rename+0x1e/0x20
    entry_SYSCALL_64_fastpath+0x12/0x6f

[minchan@kernel.org: add stable mark]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 11:40:51 -08:00
Sergey Senozhatsky 6e76668e41 zram: add lz4 algorithm backend
Introduce LZ4 compression backend and make it available for selection.
LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config
option.  The default compression backend is LZO.

TEST

(x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G,
ext4 file system, 3 compression streams)

iozone -t 3 -R -r 16K -s 60M -I +Z

       Test           LZO           LZ4
----------------------------------------------
  Initial write   1642744.62    1317005.09
        Rewrite   2498980.88    1800645.16
           Read   3957026.38    5877043.75
        Re-read   3950997.38    5861847.00
   Reverse Read   2937114.56    5047384.00
    Stride read   2948163.19    4929587.38
    Random read   3292692.69    4880793.62
 Mixed workload   1545602.62    3502940.38
   Random write   2448039.75    1758786.25
         Pwrite   1670051.03    1338329.69
          Pread   2530682.00    5097177.62
         Fwrite   3232085.62    3275942.56
          Fread   6306880.25    6645271.12

So on my system LZ4 is slower in write-only tests, while it performs
better in read-only and mixed (reads + writes) tests.

Official LZ4 benchmarks available here http://code.google.com/p/lz4/
(linux kernel uses revision r90).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00