Update samples/bpf/.gitignore to ignore files generated when building
the samples. Add:
- vmlinux.h
- the generated skeleton files (*.skel.h)
- the samples/bpf/libbpf/ and .../bpftool/ directories, in preparation
of a future commit which introduces a local output directory for
building libbpf and bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-9-quentin@isovalent.com
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
Recent-ish versions of make do no longer consider number signs ("#") as
comment symbols when they are inserted inside of a macro reference or in
a function invocation. In such cases, the symbols should not be escaped.
There are a few occurrences of "\#" in libbpf's and samples' Makefiles.
In the former, the backslash is harmless, because grep associates no
particular meaning to the escaped symbol and reads it as a regular "#".
In samples' Makefile, recent versions of make will pass the backslash
down to the compiler, making the probe fail all the time and resulting
in the display of a warning about "make headers_install" being required,
even after headers have been installed.
A similar issue has been addressed at some other locations by commit
9564a8cf42 ("Kbuild: fix # escaping in .cmd files for future Make").
Let's address it for libbpf's and samples' Makefiles in the same
fashion, by using a "$(pound)" variable (pulled from
tools/scripts/Makefile.include for libbpf, or re-defined for the
samples).
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Fixes: 2f38304127 ("libbpf: Make libbpf_version.h non-auto-generated")
Fixes: 07c3bbdb1a ("samples: bpf: print a warning about headers_install")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006111049.20708-1-quentin@isovalent.com
Reuse the logic in vfio_noiommu_group_alloc to allocate a fake
single-device iommu group for mediated devices by factoring out a common
function, and replacing the noiommu boolean field in struct vfio_group
with an enum to distinguish the three different kinds of groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
libbpf and bpftool have been dual-licensed to facilitate inclusion in software
that is not compatible with GPL2-only (ie: Apache2), but the samples are still
GPL2-only.
Given these files are samples, they get naturally copied around. For example,
it is the case for samples/bpf/bpf_insn.h which was copied into the systemd
tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h
Some more context on systemd's needs specifically:
Most of systemd is (L)GPL2-or-later, which means there is no perceived
incompatibility with Apache2 software and can thus be linked with
OpenSSL 3.0. But given this GPL2-only header is included this is currently
not possible. Dual-licensing this header solves this problem for us as we
are scoping a move to OpenSSL 3.0, see:
https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html
Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same
licensing used by libbpf and bpftool:
1bc38b8ff6 ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause")
907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Chenbo Feng <fengc@google.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210923000540.47344-1-luca.boccassi@gmail.com
Generate vmlinux.h only from the in-tree vmlinux, and remove enum
declarations that would cause a build failure in case of version
mismatches.
There are now two options when building the samples:
1. Compile the kernel to use in-tree vmlinux for vmlinux.h
2. Override VMLINUX_BTF for samples using something like this:
make VMLINUX_BTF=/sys/kernel/btf/vmlinux -C samples/bpf
This change was tested with relative builds, e.g. cases like:
* make O=build -C samples/bpf
* make KBUILD_OUTPUT=build -C samples/bpf
* make -C samples/bpf
* cd samples/bpf && make
When a suitable VMLINUX_BTF is not found, the following message is
printed:
/home/kkd/src/linux/samples/bpf/Makefile:333: *** Cannot find a vmlinux
for VMLINUX_BTF at any of " ./vmlinux", build the kernel or set
VMLINUX_BTF variable. Stop.
Fixes: 384b6b3bbf (samples: bpf: Add vmlinux.h generation support)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210928054608.1799021-1-memxor@gmail.com
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.
Address HwAddress
160000e0 1600005e0001
ff96a8c0 ffffffffffff
faffffef faff7f5e0001
196a8c0 9607871293ea
fb0000e0 fb00005e0001
0 0
196a8c0 9607871293ea
ffff11ac ffffffffffff
faffffef faff7f5e0001
fb0000e0 fb00005e0001
160000e0 1600005e0001
160000e0 1600005e0001
faffffef faff7f5e0001
fb0000e0 fb00005e0001
40011ac 40011ac4202
Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.
Address HwAddress
224.0.0.22 01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1 ea:93:12:87:07:96
224.0.0.251 01:00:5e:00:00:fb
0.0.0.0 00:00:00:00:00:00
192.168.150.1 ea:93:12:87:07:96
172.17.255.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
224.0.0.22 01:00:5e:00:00:16
224.0.0.22 01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
172.17.0.4 02:42:ac:11:00:04
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-2-gokulkumar792@gmail.com
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.
Destination Gateway Genmask Metric Iface
0.0.0.0 196a8c0 0 0 enp7s0
0.0.0.0 196a8c0 0 0 wlp6s0
169.254.0.0 196a8c0 16 0 enp7s0
172.17.0.0 0 16 0 docker0
192.168.150.0 0 24 0 enp7s0
192.168.150.0 0 24 0 wlp6s0
Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.
Destination Gateway Genmask Metric Iface
0.0.0.0 192.168.150.1 0.0.0.0 0 enp7s0
0.0.0.0 192.168.150.1 0.0.0.0 0 wlp6s0
169.254.0.0 192.168.150.1 255.255.0.0 0 enp7s0
172.17.0.0 0.0.0.0 255.255.0.0 0 docker0
192.168.150.0 0.0.0.0 255.255.255.0 0 enp7s0
192.168.150.0 0.0.0.0 255.255.255.0 0 wlp6s0
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-1-gokulkumar792@gmail.com
Remove blank lines that are not necessary, fixing the checkpatch script
reports. While at it, add a blank line after the switch default block,
similar to the other parts of the codebase.
Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-8-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the typos in the words spelling as per the checkpatch script
reports.
Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-7-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes for kgdb/kdb this cycle are dominated by a change from
Sumit that removes as small (256K) private heap from kdb. This is
change I've hoped for ever since I discovered how few users of this
heap remained in the kernel, so many thanks to Sumit for hunting
these down. Other change is an incremental step towards SPDX headers.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=iMIF
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Changes for kgdb/kdb this cycle are dominated by a change from Sumit
that removes as small (256K) private heap from kdb. This is change
I've hoped for ever since I discovered how few users of this heap
remained in the kernel, so many thanks to Sumit for hunting these
down.
The other change is an incremental step towards SPDX headers"
* tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kernel: debug: Convert to SPDX identifier
kdb: Rename members of struct kdbtab_t
kdb: Simplify kdb_defcmd macro logic
kdb: Get rid of redundant kdb_register_flags()
kdb: Rename struct defcmd_set to struct kdb_macro
kdb: Get rid of custom debug heap allocator
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmEvwWkbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsi+1UP/3CRizghroINVYR+cJ99
Tjz7lB/wlzxmRfX+SL4NAVe1SSB2VeCgU4B0PF6kywELLS8OhCO3HXYXVsz244fW
Gk5UIns86+TFTrfCOMpwYBV0P86zuaa1ZnvCnkhMK1i2pTZ+oX8hUH1Yj5clHuU+
YgC7JfEuTIAX73q2bC/llLvNE9ke1QCoDX3+HAH87ttqutnRWcnnq56PTEqwe+EW
eMA+glB1UG6JAqXxoJET4155arNOny1/ZMprfBr3YXZTiXDF/lSzuMyUtbp526Sf
hsvlnqtE6TCdfKbog0Lxckl+8E9NCq8jzFBKiZhbccrQv3vVaoP6dOsPWcT35Kp1
IjzMLiHIbl4wXOL+Xap/biz3LCM5BMdT/OhW5LUC007zggK71ndRvb9F8ptW83Bv
0Uh9DNv7YIQ0su3JHZEsJ3qPFXQXceP199UiADOGSeV8U1Qig3YKsHUDMuALfFvN
t+NleeJ4qCWao+W4VCfyDfKurVnMj/cThXiDEWEeq5gMOO+6YKBIFWJVKFxUYDbf
MgGdg0nQTUECuXKXxLD4c1HAWH9xi207OnLvhW1Icywp20MsYqOWt0vhg+PRdMBT
DK6STxP18aQxCaOuQN9Vf81LjhXNTeg+xt3mMyViOZPcKfX6/wAC9qLt4MucJDdw
FBfOz2UL2F56dhAYT+1vHoUM
=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here, notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanna labs driver updates in this pull request,
that will probably come later before -rc1 is out in a different request.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+Kyw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymlpACg0JM+hSeo8T5GtwZksZ1QXXQfh8sAoK6Dt6xF
e62OQuuMFT0Un0qOflZk
=emH+
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEukBYACgkQMUZtbf5S
IrsyHA//TO8dw18NYts4n9LmlJT2naJ7yBUUSSXK/M+DtW0MQ9nnHhqzPm5uJdRl
IgQTNJrW3dYzRwgqaWZqEwO1t5/FI+f87ND1Nsekg7x9tF66a6ov5WxU26TwwSba
U+si/inQ/4chuQ+LxMQobqCDxaLE46I2dIoRl+YfndJ24DRzYSwAEYIPPbSdfyU+
+/l+3s4GaxO4k/hLciPAiOniyxLoUNiGUTNh+2yqRBXelSRJRKVnl+V22ANFrxRW
nTEiplfVKhlPU1e4iLuRtaxDDiePHhw9I3j/lMHhfeFU2P/gKJIvz4QpGV0CAZg2
1VvDU32WEx1GQLXJbKm0KwoNRUq1QSjOyyFti+BO7ugGaYAR4gKhShOqlSYLzUtB
tbtzQhSNLWOGqgmSJOztZb5kFDm2EdRSll5/lP2uyFlPkIsIp0QbscJVzNTnS74b
Xz15ZOw41Z4TfWPEMWgfrx6Zkm7pPWkly+7WfUkPcHa1gftNz6tzXXxSXcXIBPdi
yQ5JCzzxrM5573YHuk5YedwZpn6PiAt4A/muFGk9C6aXP60TQAOS/ppaUzZdnk4D
NfOk9mj06WEULjYjPcKEuT3GGWE6kmjb8Pu0QZWKOchv7vr6oZly1EkVZqYlXELP
AfhcrFeuufie8mqm0jdb4LnYaAnqyLzlb1J4Zxh9F+/IX7G3yoc=
=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While at it, also improve help output when CPU number is greater than
possible.
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210826120910.454081-1-memxor@gmail.com
All pktgen samples can send indefinitely num messages per thread by
setting the count option to 0(-n 0). If running sample with setting
count 0 and press Ctrl-C to stop this program, the program prints the
result of the execution so far. Currently, the samples besides
sample{3...5} don't work properly. Because Ctrl-C stops the script, not
just pktgen.
This is results of samples:
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0
Running... ctrl^C to stop
^CDevice: eth0@0
Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags)
148597pps 71Mb/sec (71326560bps) errors: 0
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0
Running... ctrl^C to stop
^C
In order to solve this, this commit adds trap SIGINT. Also, this commit
changes control_c function to print_result to maintain consistency with
other samples.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately.
This is results of samples:
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
Running... ctrl^C to stop
Device: eth0@0
Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
51762pps 24Mb/sec (24845760bps) errors: 0
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
Running... ctrl^C to stop
The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.
So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper. Also adapt to change of type of mac address map, so that
no resizing is required.
Add a new flag for sample mask that skips priting the
from_device->to_device heading for each line, as xdp_redirect_map_multi
may have two devices but the flow of data may be bidirectional, so the
output would be confusing.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-23-memxor@gmail.com
One of the notable changes is using a BPF_MAP_TYPE_HASH instead of array
map to store mac addresses of devices, as the resizing behavior was
based on max_ifindex, which unecessarily maximized the capacity of map
beyond what was needed.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-22-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Since get_mac_addr is already provided by XDP samples helper, we drop
it. Also convert to XDP samples helper similar to prior samples to
minimize duplication of code.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-21-memxor@gmail.com
Also update it to use consistent SEC("xdp") and SEC("xdp_devmap")
naming, and use global variable instead of BPF map for copying the mac
address.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-20-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Similar to xdp_monitor, xdp_redirect_cpu was quite featureful except a
few minor omissions (e.g. redirect errno reporting). All of these have
been moved to XDP samples helper, hence drop the unneeded code and
convert to usage of helpers provided by it.
One of the important changes here is dropping of mprog-disable option,
as we make that the default. Also, we support built-in programs for some
common actions on the packet when it reaches kthread (pass, drop,
redirect to device). If the user still needs to install a custom
program, they can still supply a BPF object, however the program should
be suitably tagged with SEC("xdp_cpumap") annotation so that the
expected attach type is correct when updating our cpumap map element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-19-memxor@gmail.com
Similar to xdp_monitor_kern, a lot of these BPF programs have been
reimplemented properly consolidating missing features from other XDP
samples. Hence, drop the unneeded code and rename to .bpf.c suffix.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-18-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
One important note:
The XDP samples helper handles ownership of installed XDP programs on
devices, including responding to SIGINT and SIGTERM, so drop the code
here and use the helpers we provide going forward for all xdp_redirect*
conversions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-17-memxor@gmail.com
We moved swap_src_dst_mac to xdp_sample.bpf.h to be shared with other
potential users, so drop it while moving code to the new file.
Also, consistently use SEC("xdp") naming instead.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-16-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
A lot of the code in xdp_monitor and xdp_redirect_cpu has been moved to
the xdp_sample_user.o helper, so we remove the duplicate functions here
that are no longer needed.
Thanks to BPF skeleton, we no longer depend on order of tracepoints to
uninstall them on startup. Instead, the sample mask is used to install
the needed tracepoints.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-15-memxor@gmail.com
We already moved all the functionality it provided in XDP samples helper
userspace and kernel BPF object, so just delete the unneeded code.
We also add generation of BPF skeleton and compilation using clang
-target bpf for files ending with .bpf.c suffix (to denote that they use
vmlinux.h).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-14-memxor@gmail.com
Also, take this opportunity to depend on in-tree bpftool, so that we can
use static linking support in subsequent commits for XDP samples BPF
helper object.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-13-memxor@gmail.com
This adds support for retrieval and printing for devmap_xmit total and
mutli mode tracepoint. For multi mode, we keep a hash map entry for each
redirection stream, such that we can dynamically add and remove entries
on output.
The from_match and to_match will be set by individual samples when
setting up the XDP program on these devices.
The multi mode tracepoint is also handy for xdp_redirect_map_multi,
where up to 32 devices can be specified.
Also add samples_init_pre_load macro to finally set up the resized maps
and mmap them in place for low overhead stats retrieval.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-12-memxor@gmail.com
This adds support for the devmap_xmit tracepoint, and its multi device
variant that can be used to obtain streams for each individual
net_device to net_device redirection. This is useful for decomposing
total xmit stats in xdp_monitor.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-11-memxor@gmail.com
This consolidates retrieval and printing into the XDP sample helper. For
the kthread stats, it expands xdp_stats separately with its own per-CPU
stats. For cpumap enqueue, we display FROM->TO stats also with its
per-CPU stats.
The help out explains in detail the various aspects of the output.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-10-memxor@gmail.com
These are invoked in two places, when the XDP frame or SKB (for generic
XDP) enqueued to the ptr_ring (cpumap_enqueue) and when kthread processes
the frame after invoking the CPUMAP program for it (returning stats for
the batch).
We use cpumap_map_id to filter on the map_id as a way to avoid printing
incorrect stats for parallel sessions of xdp_redirect_cpu.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-9-memxor@gmail.com
This would allow us to store stats for each XDP action, including their
per-CPU counts. Consolidating this here allows all redirect samples to
detect xdp_exception events.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-7-memxor@gmail.com
This implements per-errno reporting (for the ones we explicitly
recognize), adds some help output, and implements the stats retrieval
and printing functions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-6-memxor@gmail.com
This adds the shared BPF file that will be used going forward for
sharing tracepoint programs among XDP redirect samples.
Since vmlinux.h conflicts with tools/include for READ_ONCE/WRITE_ONCE
and ARRAY_SIZE, they are copied in to xdp_sample.bpf.h along with other
helpers that will be required.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-5-memxor@gmail.com
This file implements some common helpers to consolidate differences in
features and functionality between the various XDP samples and give them
a consistent look, feel, and reporting capabilities.
This commit only adds support for receive statistics, which does not
rely on any tracepoint, but on the XDP program installed on the device
by each XDP redirect sample.
Some of the key features are:
* A concise output format accompanied by helpful text explaining its
fields.
* An elaborate output format building upon the concise one, and folding
out details in case of errors and staying out of view otherwise.
* Printing driver names for devices redirecting packets.
* Getting mac address for interface.
* Printing summarized total statistics for the entire session.
* Ability to dynamically switch between concise and verbose mode, using
SIGQUIT (Ctrl + \).
In later patches, the support will be extended for each tracepoint with
its own custom output in concise and verbose mode.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-4-memxor@gmail.com
cookie_uid_helper_example.c: In function ‘main’:
cookie_uid_helper_example.c:178:69: warning: ‘ -j ACCEPT’ directive
writing 10 bytes into a region of size between 8 and 58
[-Wformat-overflow=]
178 | sprintf(rules, "iptables -A OUTPUT -m bpf --object-pinned %s -j ACCEPT",
| ^~~~~~~~~~
/home/kkd/src/linux/samples/bpf/cookie_uid_helper_example.c:178:9: note:
‘sprintf’ output between 53 and 103 bytes into a destination of size 100
178 | sprintf(rules, "iptables -A OUTPUT -m bpf --object-pinned %s -j ACCEPT",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
179 | file);
| ~~~~~
Fix by using snprintf and a sufficiently sized buffer.
tracex4_user.c:35:15: warning: ‘write’ reading 12 bytes from a region of
size 11 [-Wstringop-overread]
35 | key = write(1, "\e[1;1H\e[2J", 12); /* clear screen */
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use size as 11.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-2-memxor@gmail.com
There's a few cases that a string that is to be recorded in a trace event,
does not have a terminating 'nul' character, and instead, the tracepoint
passes in the length of the string to record.
Add two helper macros to the trace event code that lets this work easier,
than tricks with "%.*s" logic.
__string_len() which is similar to __string() for declaration, but takes a
length argument.
__assign_str_len() which is similar to __assign_str() for assiging the
string, but it too takes a length argument.
Note, the TRACE_EVENT() macro will allocate the location on the ring
buffer to 'len + 1', that will be used to store the string into. It is a
requirement that the 'len' used for this is a most the length of the
string being recorded.
This string can still use __get_str() just like strings created with
__string() can use to retrieve the string.
Link: https://lore.kernel.org/linux-nfs/20210513105018.7539996a@gandalf.local.home/
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, "sample04" and "sample05" are not working properly when
running with an IPv6 option("-6"). The commit 0f06a6787e ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition
of this option at "sample04" and "sample05".
In order to support IPv6 option, this commit adds logic related to IPv6
option.
Fixes: 0f06a6787e ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All pktgen samples can use the environment variable instead of option
parameters(eg. $DEV is able to use instead of '-i' option).
This is results of running sample as root and user:
// running as root
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
Running... ctrl^C to stop
// running as normal user
$ DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
[...]
ERROR: Please specify output device
This results show the sample doesn't work properly when the sample runs
as normal user. Because the sample is restarted by the function
(root_check_run_with_sudo) to run with sudo. In this process, the
environment variable of normal user doesn't propagate to sudo.
It can be solved by using "-E"(--preserve-env) option of "sudo", which
preserve normal user's existing environment variables. So this commit
adds "-E" option in the function (root_check_run_with_sudo).
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mbochs_close() iterates over global device state and frees it. Currently
this is done every time a device FD is closed, but if multiple device FDs
are open this could corrupt other still active FDs.
Change this to use close_device() so it only runs on the last close.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The core code no longer requires these ops to be defined, so delete these
empty functions and leave the op as NULL. mtty's functions only log a
pointless message, delete that entirely.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This pairs with vfio_init_group_dev() and allows undoing any state that is
stored in the vfio_device unrelated to registration. Add appropriately
placed calls to all the drivers.
The following patch will use this to add pre-registration state for the
device set.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Convert mbochs to use an atomic scheme for this like mtty was changed
into. The atomic fixes various race conditions with probing. Add the
missing error unwind. Also add the missing kfree of mdev_state->pages.
Fixes: 681c1615f8 ("vfio/mbochs: Convert to use vfio_register_group_dev()")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Co-developed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/2-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The patch to move the get/put to core and the patch to convert the samples
to use vfio_device crossed in a way that this was missed. When both
patches are together the samples do not need their own get/put.
Fixes: 437e41368c ("vfio/mdpy: Convert to use vfio_register_group_dev()")
Fixes: 681c1615f8 ("vfio/mbochs: Convert to use vfio_register_group_dev()")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A codeblock for handling nested vlan trips newbies into thinking it as
duplicate code. Explicitly add a comment to clarify.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809070046.32142-1-falakreyaz@gmail.com
There is a forward declaration of ip_fast_csum() just before its
implementation, remove the unneeded forward declaration.
While at it mark the implementation as static inline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-3-simon.horman@corigine.com
The xdpsock sample application is a useful base for experiment's around
AF_XDP sockets. Compiling the sample outside of the kernel tree is made
harder then it has to be as the sample includes two headers and that are
not installed by 'make install_header' nor are usually part of
distributions kernel headers.
The first header asm/barrier.h is not used and can just be dropped.
The second linux/compiler.h are only needed for the decorator __force
and are only used in ip_fast_csum(), csum_fold() and
csum_tcpudp_nofold(). These functions are copied verbatim from
include/asm-generic/checksum.h and lib/checksum.c. While it's fine to
copy and use these functions in the sample application the decorator
brings no value and can be dropped together with the include.
With this change it's trivial to compile the xdpsock sample outside the
kernel tree from xdpsock_user.c and xdpsock.h.
$ gcc -o xdpsock xdpsock_user.c -lbpf -lpthread
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-2-simon.horman@corigine.com
Commit ce4dade7f1 ("samples/bpf: xdp_redirect_cpu: Load a eBPF program
on cpumap") added the following option, but missed adding it to optstring:
- mprog-disable: disable loading XDP program on cpumap entries
Fix it and add the missing option character.
Fixes: ce4dade7f1 ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap")
Signed-off-by: Matthew Cover <matthew.cover@stackpath.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210731005632.13228-1-matthew.cover@stackpath.com
The original mei driver communication was strictly write command and
receive response flow, the completion of write was determined when
response was ready using select(). This paradigm is a long time not
true. There can be write without a response and an unsolicited read.
The driver is capable of handling those.
Adjust also the sample code and remove select() on read() from the
write flow. Add select to the read flow to showcase how to do the
read with a timeout.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210801072532.8668-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are recently added xdp samples (xdp_redirect_map_multi and
xdpsock_ctrl_proc) which are not managed by .gitignore.
This commit adds these files to .gitignore.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210727041056.23455-2-claudiajkang@gmail.com
The current behavior of 'tracex7' doesn't consist with other bpf samples
tracex{1..6}. Other samples do not require any argument to run with, but
tracex7 should be run with btrfs device argument. (it should be executed
with test_override_return.sh)
Currently, tracex7 doesn't have any description about how to run this
program and raises an unexpected error. And this result might be
confusing since users might not have a hunch about how to run this
program.
// Current behavior
# ./tracex7
sh: 1: Syntax error: word unexpected (expecting ")")
// Fixed behavior
# ./tracex7
ERROR: Run with the btrfs device argument!
In order to fix this error, this commit adds logic to report a message
and exit when running this program with a missing argument.
Additionally in test_override_return.sh, there is a problem with
multiple directory(tmpmnt) creation. So in this commit adds a line with
removing the directory with every execution.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210727041056.23455-1-claudiajkang@gmail.com
Remove redundant prefix "cmd_" from name of members in struct kdbtab_t
for better readibility.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210712134620.276667-5-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Commit e4f291b3f7 ("kdb: Simplify kdb commands registration")
allowed registration of pre-allocated kdb commands with pointer to
struct kdbtab_t. Lets switch other users as well to register pre-
allocated kdb commands via:
- Changing prototype for kdb_register() to pass a pointer to struct
kdbtab_t instead.
- Embed kdbtab_t structure in kdb_macro_t rather than individual params.
With these changes kdb_register_flags() becomes redundant and hence
removed. Also, since we have switched all users to register
pre-allocated commands, "is_dynamic" flag in struct kdbtab_t becomes
redundant and hence removed as well.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210712134620.276667-3-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets
in subflow receive buffers longer than necessary, delaying
MPTCP-level ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
- netfilter: conntrack: do not mark RST in the reply direction coming
after SYN packet for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison
-----BEGIN PGP SIGNATURE-----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=QFnb
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Experience from production shows queue size of 192 is too small, as
this caused packet drops during cpumap-enqueue on RX-CPU. This can be
diagnosed with xdp_monitor sample program.
This bpftrace program was used to diagnose the problem in more detail:
bpftrace -e '
tracepoint:xdp:xdp_cpumap_kthread { @deq_bulk = lhist(args->processed,0,10,1); @drop_net = lhist(args->drops,0,10,1) }
tracepoint:xdp:xdp_cpumap_enqueue { @enq_bulk = lhist(args->processed,0,10,1); @enq_drops = lhist(args->drops,0,10,1); }'
Watch out for the @enq_drops counter. The @drop_net counter can happen
when netstack gets invalid packets, so don't despair it can be
natural, and that counter will likely disappear in newer kernels as it
was a source of confusion (look at netstat info for reason of the
netstack @drop_net counters).
The production system was configured with CPU power-saving C6 state.
Learn more in this blogpost[1].
And wakeup latency in usec for the states are:
# grep -H . /sys/devices/system/cpu/cpu0/cpuidle/*/latency
/sys/devices/system/cpu/cpu0/cpuidle/state0/latency:0
/sys/devices/system/cpu/cpu0/cpuidle/state1/latency:2
/sys/devices/system/cpu/cpu0/cpuidle/state2/latency:10
/sys/devices/system/cpu/cpu0/cpuidle/state3/latency:133
Deepest state take 133 usec to wakeup from (133/10^6). The link speed
is 25Gbit/s ((25*10^9/8) in bytes/sec). How many bytes can arrive with
in 133 usec at this speed: (25*10^9/8)*(133/10^6) = 415625 bytes. With
MTU size packets this is 275 packets, and with minimum Ethernet (incl
intergap overhead) 84 bytes it is 4948 packets. Clearly default queue
size is too small.
Setting default cpumap queue to 2048 as worst-case (small packet) at
10Gbit/s is 1979 packets with 133 usec wakeup time, +64 packet before
kthread wakeup call (due to xdp_do_flush) worst-case 2043 packets.
Thus, if a packet burst on RX-CPU will enqueue packets to a remote
cpumap CPU that is in deep-sleep state it can overrun the cpumap queue.
The production system was also configured to avoid deep-sleep via:
tuned-adm profile network-latency
[1] https://jeremyeder.com/2013/08/30/oh-did-you-expect-the-cpu/
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/162523477604.786243.13372630844944530891.stgit@firesoul
Execute the following command and exit, then execute it again, the following
error will be reported:
$ sudo ./samples/bpf/xdpsock -i ens4f2 -M
^C
$ sudo ./samples/bpf/xdpsock -i ens4f2 -M
libbpf: elf: skipping unrecognized data section(16) .eh_frame
libbpf: elf: skipping relo section(17) .rel.eh_frame for section(16) .eh_frame
libbpf: Kernel error message: XDP program already attached
ERROR: link set xdp fd failed
Commit c9d27c9e8d ("samples: bpf: Do not unload prog within xdpsock") removed
the unloading prog code because of the presence of bpf_link. This is fine if
XDP_SHARED_UMEM is disabled, but if it is enabled, unloading the prog is still
needed.
Fixes: c9d27c9e8d ("samples: bpf: Do not unload prog within xdpsock")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210628091815.2373487-1-wanghai38@huawei.com
The samples/bpf Makefile currently compiles BPF files in a way that will
produce an .eh_frame section, which will in turn confuse libbpf and produce
errors when loading BPF programs, like:
libbpf: elf: skipping unrecognized data section(32) .eh_frame
libbpf: elf: skipping relo section(33) .rel.eh_frame for section(32) .eh_frame
Fix this by instruction Clang not to produce this section, as it's useless
for BPF anyway.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210705103841.180260-1-toke@redhat.com
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
- Some kernel-doc cleanups. That script is still regex onslaught from
hell, but it has gotten a little better.
- Improvements to the checkpatch docs, which are also used by the tool
itself.
- A major update to the pathname lookup documentation.
- Elimination of :doc: markup, since our automarkup magic can create
references from filenames without all the extra noise.
- The flurry of Chinese translation activity continues.
Plus, of course, the usual collection of updates, typo fixes, and warning
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmDZ6pQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y9W0IAIpzBZDVsDQ7s5cIjbxEh9Oeh1uRmwuObnQh
xsM5oLuAUSMczf5JX8cdyutWJfdoEF5WHjfbt1otfys+kW9m7z0b1K4xw684Y390
sPk3eYVYLiUAZ4/LVdC47BpAzzgJ5U9iC6+FjOATAYsY40EwruxyZWjmY+SaDOU5
dQPjbpRuNQTFjYE6nZIW0o6jyunrfFaJTS6g2bdDoBDOGKyNOSKEw4XZ442cJ3km
uXoMfSJGslQj6qbGY0YhNeaNQm0ErcQw2K4lS3K4gc7Lht32Fbi1lhaqnTIkgI5f
Rh3X37pb90Ya88uWxldVB2bXUrA+PZA/cJqwNTrgw+niBQl6sKU=
=KDcM
-----END PGP SIGNATURE-----
Merge tag 'docs-5.14' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a reasonably active cycle for documentation; this includes:
- Some kernel-doc cleanups. That script is still regex onslaught from
hell, but it has gotten a little better.
- Improvements to the checkpatch docs, which are also used by the
tool itself.
- A major update to the pathname lookup documentation.
- Elimination of :doc: markup, since our automarkup magic can create
references from filenames without all the extra noise.
- The flurry of Chinese translation activity continues.
Plus, of course, the usual collection of updates, typo fixes, and
warning fixes"
* tag 'docs-5.14' of git://git.lwn.net/linux: (115 commits)
docs: path-lookup: use bare function() rather than literals
docs: path-lookup: update symlink description
docs: path-lookup: update get_link() ->follow_link description
docs: path-lookup: update WALK_GET, WALK_PUT desc
docs: path-lookup: no get_link()
docs: path-lookup: update i_op->put_link and cookie description
docs: path-lookup: i_op->follow_link replaced with i_op->get_link
docs: path-lookup: Add macro name to symlink limit description
docs: path-lookup: remove filename_mountpoint
docs: path-lookup: update do_last() part
docs: path-lookup: update path_mountpoint() part
docs: path-lookup: update path_to_nameidata() part
docs: path-lookup: update follow_managed() part
docs: Makefile: Use CONFIG_SHELL not SHELL
docs: Take a little noise out of the build process
docs: x86: avoid using ReST :doc:`foo` markup
docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 12 day(s) which contain
a total of 56 files changed, 394 insertions(+), 380 deletions(-).
The main changes are:
1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney.
2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski.
3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev.
4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria.
5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards.
6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa.
7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi.
8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim.
9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young.
10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer.
11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski.
12) Fix up bpfilter startup log-level to info level, from Gary Lin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sample mtty mdev driver doesn't actually enforce the number of
device instances it claims are available. Implement this properly.
Link: https://lore.kernel.org/r/162465624894.3338367.12935940647049917981.stgit@omen
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Platform PMU driver updates:
- x86 Intel uncore driver updates for Skylake (SNR) and Icelake (ICX) servers
- Fix RDPMC support
- Fix [extended-]PEBS-via-PT support
- Fix Sapphire Rapids event constraints
- Fix :ppp support on Sapphire Rapids
- Fix fixed counter sanity check on Alder Lake & X86_FEATURE_HYBRID_CPU
- Other heterogenous-PMU fixes
- Kprobes:
- Remove the unused and misguided kprobe::fault_handler callbacks.
- Warn about kprobes taking a page fault.
- Fix the 'nmissed' stat counter.
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=20Vc
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Platform PMU driver updates:
- x86 Intel uncore driver updates for Skylake (SNR) and Icelake (ICX) servers
- Fix RDPMC support
- Fix [extended-]PEBS-via-PT support
- Fix Sapphire Rapids event constraints
- Fix :ppp support on Sapphire Rapids
- Fix fixed counter sanity check on Alder Lake & X86_FEATURE_HYBRID_CPU
- Other heterogenous-PMU fixes
- Kprobes:
- Remove the unused and misguided kprobe::fault_handler callbacks.
- Warn about kprobes taking a page fault.
- Fix the 'nmissed' stat counter.
- Misc cleanups and fixes.
* tag 'perf-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix task context PMU for Hetero
perf/x86/intel: Fix instructions:ppp support in Sapphire Rapids
perf/x86/intel: Add more events requires FRONTEND MSR on Sapphire Rapids
perf/x86/intel: Fix fixed counter check warning for some Alder Lake
perf/x86/intel: Fix PEBS-via-PT reload base value for Extended PEBS
perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task
kprobes: Do not increment probe miss count in the fault handler
x86,kprobes: WARN if kprobes tries to handle a fault
kprobes: Remove kprobe::fault_handler
uprobes: Update uprobe_write_opcode() kernel-doc comment
perf/hw_breakpoint: Fix DocBook warnings in perf hw_breakpoint
perf/core: Fix DocBook warnings
perf/core: Make local function perf_pmu_snapshot_aux() static
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR
perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
perf/x86/intel/uncore: Drop unnecessary NULL checks after container_of()
Dan points out that an error case left things on this list. It is also
missing locking in available_instances_show().
Further study shows the list isn't needed at all, just store the total
ports in use in an atomic and delete the whole thing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 09177ac919 ("vfio/mtty: Convert to use vfio_register_group_dev()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-0bc56b362ca7+62-mtty_used_ports_jgg@nvidia.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the case where the call to vfio_register_group_dev fails the error
return path kfree's mdev_state but not mdev_state->vconfig. Fix this
by kfree'ing mdev_state->vconfig before returning.
Addresses-Coverity: ("Resource leak")
Fixes: 437e41368c ("vfio/mdpy: Convert to use vfio_register_group_dev()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210622183710.28954-1-colin.king@canonical.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is straightforward conversion, the mdev_state is actually serving as
the vfio_device and we can replace all the mdev_get_drvdata()'s and the
wonky dead code with a simple container_of().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210617142218.1877096-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is straightforward conversion, the mdev_state is actually serving as
the vfio_device and we can replace all the mdev_get_drvdata()'s and the
wonky dead code with a simple container_of().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210617142218.1877096-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is straightforward conversion, the mdev_state is actually serving as
the vfio_device and we can replace all the mdev_get_drvdata()'s and the
wonky dead code with a simple container_of()
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20210617142218.1877096-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For some reason the vfio_mdev shim mdev_driver has its own module and
kconfig. As the next patch requires access to it from mdev.ko merge the
two modules together and remove VFIO_MDEV_DEVICE.
A later patch deletes this driver entirely.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20210617142218.1877096-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
If bpf_map_update_elem() failed, main() should return a negative error.
Fixes: 832622e6bd ("xdp: sample program for new bpf_redirect helper")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210616042534.315097-1-wanghai38@huawei.com
A Segmentation fault error is caused when the following command
is executed.
$ sudo ./samples/bpf/xdp_redirect lo
Segmentation fault
This command is missing a device <IFNAME|IFINDEX> as an argument, resulting
in out-of-bounds access from argv.
If the number of devices for the xdp_redirect parameter is not 2,
we should report an error and exit.
Fixes: 24251c2647 ("samples/bpf: add option for native and skb mode for redirect apps")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210616042324.314832-1-wanghai38@huawei.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp_sample_pkts usage() is missing the introduction of the
"-S" option, this patch adds it.
Fixes: d50ecc46d1 ("samples/bpf: Attach XDP programs in driver mode by default")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210615135724.29528-1-wanghai38@huawei.com
xdp_fwd usage() is missing the introduction of the "-S"
and "-F" options, this patch adds it.
Fixes: d50ecc46d1 ("samples/bpf: Attach XDP programs in driver mode by default")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210615135554.29158-1-wanghai38@huawei.com
The reason for kprobe::fault_handler(), as given by their comment:
* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.
Is just plain bad. Those other handlers are ran from non-preemptible
context and had better use _nofault() functions. Also, there is no
upstream usage of this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210525073213.561116662@infradead.org
This is a sample for xdp redirect broadcast. In the sample we could forward
all packets between given interfaces. There is also an option -X that could
enable 2nd xdp_prog on egress interface.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-4-liuhangbin@gmail.com
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for samples/bpf/ibumad_kern.c follows this syntax, but
the content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* ibumad BPF sample kernel side
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/bpf/20210523151408.22280-1-yashsri421@gmail.com
Fix to return a negative error code from the framebuffer_alloc() error
handling case instead of 0, also release regions in some error handing
cases.
Fixes: cacade1946 ("sample: vfio mdev display - guest driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210520133641.1421378-1-weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It should use post_handler instead of pre_handler in handler_post().
As Joe Perches suggested, it would be better to use pr_fmt and remove
all the embedded pre/post/fault strings. This would change the style of
the output through.
Fixes: e16c5dd515 ("samples/kprobes: Add s390 case in kprobe example module")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Marc Koderer <marc@koderer.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/1621218083-23519-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix a defective format in handler_fault() ending with an 'n' that
should be '\n'.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/1621218083-23519-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
While cross compiling on ARM32 , the casting from pointer to __u64 will
cause warnings:
samples/bpf/task_fd_query_user.c: In function 'main':
samples/bpf/task_fd_query_user.c:399:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
399 | uprobe_file_offset = (__u64)main - (__u64)&__executable_start;
| ^
samples/bpf/task_fd_query_user.c:399:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
399 | uprobe_file_offset = (__u64)main - (__u64)&__executable_start;
Workaround this by using "unsigned long" to adapt to different ARCHs.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210511140429.89426-1-liuhailongg6@163.com
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config is
really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=935P
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the tx_only micro-benchmark in xdpsock to take frame size into
consideration. It was hardcoded to the default value of frame_size
which is 4K. Changing this on the command line to 2K made half of the
packets illegal as they were outside the umem and were therefore
discarded by the kernel.
Fixes: 46738f73ea ("samples/bpf: add use of need_wakeup flag in xdpsock")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210506124349.6666-1-magnus.karlsson@gmail.com
* Support for the memtest= kernel command-line argument.
* Support for building the kernel with FORTIFY_SOURCE.
* Support for generic clockevent broadcasts.
* Support for the buildtar build target.
* Some build system cleanups to pass more LLVM-friendly arguments.
* Support for kprobes.
* A rearranged kernel memory map, the first part of supporting sv48
systems.
* Improvements to kexec, along with support for kdump and crash kernels.
* An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
* Support for XIP.
* A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
Along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
-----BEGIN PGP SIGNATURE-----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=PsA8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
Originally "type" could be NULL and these checks were required, but we
recently changed how "type" is assigned and that's no longer the case.
Now "type" points to an element in the middle of a non-NULL array.
Removing the checks does not affect runtime at all, but it makes the
code a little bit simpler to read.
Fixes: 3d3a360e57 ("vfio/mbochs: Use mdev_get_type_group_id()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <20210429095327.GY1981@kadam>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
The pattern prefixed with '/' matches files in the same directory,
but not ones in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Patch series "remap_vmalloc_range cleanups".
This series removes an open coded instance of remap_vmalloc_range and
removes the unused remap_vmalloc_range_partial export.
This patch (of 2):
Use remap_vmalloc_range instead of open coding it using
remap_vmalloc_range_partial.
Link: https://lkml.kernel.org/r/20210301082235.932968-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210301082235.932968-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The intent with this code was to return negative error codes but instead
it returns positives.
The problem is how type promotion works with ternary operations. These
functions return long, "ret" is an int and "copied" is a u32. The
negative error code is first cast to u32 so it becomes a high positive and
then cast to long where it's still a positive.
We could fix this by declaring "ret" as a ssize_t but let's just get rid
of the ternaries instead.
Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda
Fixes: 5bf2b19320 ("kfifo: add example files to the kernel sample directory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
Add riscv specific info dump in both handler_pre() and handler_post().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a basic sandbox tool to launch a command which can only access a
list of file hierarchies in a read-only or read-write way.
Cc: James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-12-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
>From commit c0bbbdc32f ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.
This commit fixes by using bpf_probe_read_kernel.
Signed-off-by: Yaqi Chen <chendotjs@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210416154803.37157-1-chendotjs@gmail.com
The driver core standard is to pass in the properly typed object, the
properly typed attribute and the buffer data. It stems from the root
kobject method:
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..)
Each subclass of kobject should provide their own function with the same
signature but more specific types, eg struct device uses:
ssize_t (*show)(struct device *dev, struct device_attribute *attr,..)
In this case the existing signature is:
ssize_t (*show)(struct kobject *kobj, struct device *dev,..)
Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'.
Change the mdev_type related sysfs attribute functions to:
ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..)
In order to restore type safety and match the driver core standard
There are no current users of 'attr', but if it is ever needed it would be
hard to add in retroactively, so do it now.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kobj here is a type-erased version of mdev_type, which is already
stored in the struct mdev_device being passed in. It was only ever used to
compute the type_group_id, which is now extracted directly from the mdev.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The mbochs_types array is parallel to the supported_type_groups array, so
the type_group_id indexes both. Instead of doing string searching just
directly index with type_group_id in all places.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <14-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The mdpy_types array is parallel to the supported_type_groups array, so
the type_group_id indexes both. Instead of doing string searching just
directly index with type_group_id in all places.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <13-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The type_group_id directly gives the single or dual port index, no
need for string searching.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <12-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These should always be prefixed with static, otherwise compilation
will fail on non-modular builds with
ld: samples/vfio-mdev/mbochs.o:(.data+0x2e0): multiple definition of `mdev_type_attr_name'; samples/vfio-mdev/mdpy.o:(.data+0x240): first defined here
Fixes: a5e6e6505f ("sample: vfio bochs vbe display (host device for bochs-drm)")
Fixes: d61fc96f47 ("sample: vfio mdev display - host device")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <1-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With the introduction of bpf_link in xsk's libbpf part, there's no
further need for explicit unload of prog on xdpsock's termination. When
process dies, the bpf_link's refcount will be decremented and resources
will be unloaded/freed under the hood in case when there are no more
active users.
While at it, don't dump stats on error path.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-8-maciej.fijalkowski@intel.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-24
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).
The main changes are:
1) Static linking of multiple BPF ELF files, from Andrii.
2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.
3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To configure various complex flows we for sure can create custom
pktgen init scripts, but sometimes thats not that easy.
New "-a" (append) option in all the existing sample scripts allows
to append more "devices" into pktgen threads.
The most straightforward usecases for that are:
- using multiple devices. We have to generate full linerate on
all physical functions (ports) of our multiport device.
- pushing multiple flows (with different packet options)
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DELAY may now be explicitly specified via common parameter -w
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
We mmap the umem region, but we never munmap it.
Add the missing call at the end of the cleanup.
Fixes: 3945b37a97 ("samples/bpf: use hugepages in xdpsock app")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210303185636.18070-3-maciej.fijalkowski@intel.com
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
-----BEGIN PGP SIGNATURE-----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=HCrJ
-----END PGP SIGNATURE-----
Merge tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring updates from David Howells:
"Here's a set of minor keyrings fixes/cleanups that I've collected from
various people for the upcoming merge window.
A couple of them might, in theory, be visible to userspace:
- Make blacklist_vet_description() reject uppercase letters as they
don't match the all-lowercase hex string generated for a blacklist
search.
This may want reconsideration in the future, but, currently, you
can't add to the blacklist keyring from userspace and the only
source of blacklist keys generates lowercase descriptions.
- Fix blacklist_init() to use a new KEY_ALLOC_* flag to indicate that
it wants KEY_FLAG_KEEP to be set rather than passing KEY_FLAG_KEEP
into keyring_alloc() as KEY_FLAG_KEEP isn't a valid alloc flag.
This isn't currently a problem as the blacklist keyring isn't
currently writable by userspace.
The rest of the patches are cleanups and I don't think they should
have any visible effect"
* tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
watch_queue: rectify kernel-doc for init_watch()
certs: Replace K{U,G}IDT_INIT() with GLOBAL_ROOT_{U,G}ID
certs: Fix blacklist flag type confusion
PKCS#7: Fix missing include
certs: Fix blacklisted hexadecimal hash string check
certs/blacklist: fix kernel doc interface issue
crypto: public_key: Remove redundant header file from public_key.h
keys: remove trailing semicolon in macro definition
crypto: pkcs7: Use match_string() helper to simplify the code
PKCS#7: drop function from kernel-doc pkcs7_validate_trust_one
encrypted-keys: Replace HTTP links with HTTPS ones
crypto: asymmetric_keys: fix some comments in pkcs7_parser.h
KEYS: remove redundant memset
security: keys: delete repeated words in comments
KEYS: asymmetric: Fix kerneldoc
security/keys: use kvfree_sensitive()
watch_queue: Drop references to /dev/watch_queue
keys: Remove outdated __user annotations
security: keys: Fix fall-through warnings for Clang
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
Launch a simple guest (with several instructions as payload) on ACRN
with demonstration ioctl usage.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-19-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There exists many build errors when make M=samples/bpf on the Loongson
platform. This issue is MIPS related, x86 compiles just fine.
Here are some errors:
CLANG-bpf samples/bpf/sockex2_kern.o
In file included from samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:24:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:8:
In file included from ./include/linux/kernel.h:11:
In file included from ./include/linux/bitops.h:32:
In file included from ./arch/mips/include/asm/bitops.h:19:
In file included from ./arch/mips/include/asm/barrier.h:11:
./arch/mips/include/asm/addrspace.h:13:10: fatal error: 'spaces.h' file not found
^~~~~~~~~~
1 error generated.
CLANG-bpf samples/bpf/sockex2_kern.o
In file included from samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:24:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:8:
In file included from ./include/linux/kernel.h:11:
In file included from ./include/linux/bitops.h:32:
In file included from ./arch/mips/include/asm/bitops.h:22:
In file included from ./arch/mips/include/asm/cpu-features.h:13:
In file included from ./arch/mips/include/asm/cpu-info.h:15:
In file included from ./include/linux/cache.h:6:
./arch/mips/include/asm/cache.h:12:10: fatal error: 'kmalloc.h' file not found
^~~~~~~~~~~
1 error generated.
CLANG-bpf samples/bpf/sockex2_kern.o
In file included from samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:24:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:8:
In file included from ./include/linux/kernel.h:11:
In file included from ./include/linux/bitops.h:32:
In file included from ./arch/mips/include/asm/bitops.h:22:
./arch/mips/include/asm/cpu-features.h:15:10: fatal error: 'cpu-feature-overrides.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
$ find arch/mips/include/asm -name spaces.h | sort
arch/mips/include/asm/mach-ar7/spaces.h
...
arch/mips/include/asm/mach-generic/spaces.h
...
arch/mips/include/asm/mach-loongson64/spaces.h
...
arch/mips/include/asm/mach-tx49xx/spaces.h
$ find arch/mips/include/asm -name kmalloc.h | sort
arch/mips/include/asm/mach-generic/kmalloc.h
arch/mips/include/asm/mach-ip32/kmalloc.h
arch/mips/include/asm/mach-tx49xx/kmalloc.h
$ find arch/mips/include/asm -name cpu-feature-overrides.h | sort
arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
...
arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
...
arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
...
arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
In the arch/mips/Makefile, there exists the following board-dependent
options:
include arch/mips/Kbuild.platforms
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
So we can do the similar things in samples/bpf/Makefile, just add
platform specific and generic include dir for MIPS Loongson64 to
fix the build errors.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1611669925-25315-1-git-send-email-yangtiezhu@loongson.cn
There exists many build warnings when make M=samples/bpf on the Loongson
platform, this issue is MIPS related, x86 compiles just fine.
Here are some warnings:
CC samples/bpf/ibumad_user.o
samples/bpf/ibumad_user.c: In function ‘dump_counts’:
samples/bpf/ibumad_user.c:46:24: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
printf("0x%02x : %llu\n", key, value);
~~~^ ~~~~~
%lu
CC samples/bpf/offwaketime_user.o
samples/bpf/offwaketime_user.c: In function ‘print_ksym’:
samples/bpf/offwaketime_user.c:34:17: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
printf("%s/%llx;", sym->name, addr);
~~~^ ~~~~
%lx
samples/bpf/offwaketime_user.c: In function ‘print_stack’:
samples/bpf/offwaketime_user.c:68:17: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
printf(";%s %lld\n", key->waker, count);
~~~^ ~~~~~
%ld
MIPS needs __SANE_USERSPACE_TYPES__ before <linux/types.h> to select
'int-ll64.h' in arch/mips/include/uapi/asm/types.h, then it can avoid
build warnings when printing __u64 with %llu, %llx or %lld.
The header tools/include/linux/types.h defines __SANE_USERSPACE_TYPES__,
it seems that we can include <linux/types.h> in the source files which
have build warnings, but it has no effect due to actually it includes
usr/include/linux/types.h instead of tools/include/linux/types.h, the
problem is that "usr/include" is preferred first than "tools/include"
in samples/bpf/Makefile, that sounds like a ugly hack to -Itools/include
before -Iusr/include.
So define __SANE_USERSPACE_TYPES__ for MIPS in samples/bpf/Makefile
is proper, if add "TPROGS_CFLAGS += -D__SANE_USERSPACE_TYPES__" in
samples/bpf/Makefile, it appears the following error:
Auto-detecting system features:
... libelf: [ on ]
... zlib: [ on ]
... bpf: [ OFF ]
BPF API too old
make[3]: *** [Makefile:293: bpfdep] Error 1
make[2]: *** [Makefile:156: all] Error 2
With #ifndef __SANE_USERSPACE_TYPES__ in tools/include/linux/types.h,
the above error has gone and this ifndef change does not hurt other
compilations.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1611551146-14052-1-git-send-email-yangtiezhu@loongson.cn
This patch add a xdp program on egress to show that we can modify
the packet on egress. In this sample we will set the pkt's src
mac to egress's mac address. The xdp_prog will be attached when
-X option supplied.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210122025007.2968381-1-liuhangbin@gmail.com
The current LLVM and Clang build procedure in samples/bpf/README.rst is
out of date. See below that the links are not accessible any more.
$ git clone http://llvm.org/git/llvm.git
Cloning into 'llvm'...
fatal: unable to access 'http://llvm.org/git/llvm.git/': Maximum (20) redirects followed
$ git clone --depth 1 http://llvm.org/git/clang.git
Cloning into 'clang'...
fatal: unable to access 'http://llvm.org/git/clang.git/': Maximum (20) redirects followed
The LLVM community has adopted new ways to build the compiler. There are
different ways to build LLVM and Clang, the Clang Getting Started page [1]
has one way. As Yonghong said, it is better to copy the build procedure
in Documentation/bpf/bpf_devel_QA.rst to keep consistent.
I verified the procedure and it is proved to be feasible, so we should
update README.rst to reflect the reality. At the same time, update the
related comment in Makefile.
Additionally, as Fangrui said, the dir llvm-project/llvm/build/install is
not used, BUILD_SHARED_LIBS=OFF is the default option [2], so also change
Documentation/bpf/bpf_devel_QA.rst together.
At last, we recommend that developers who want the fastest incremental
builds use the Ninja build system [1], you can find it in your system's
package manager, usually the package is ninja or ninja-build [3], so add
ninja to build dependencies suggested by Nathan.
[1] https://clang.llvm.org/get_started.html
[2] https://www.llvm.org/docs/CMake.html
[3] https://github.com/ninja-build/ninja/wiki/Pre-built-Ninja-packages
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/bpf/1611279584-26047-1-git-send-email-yangtiezhu@loongson.cn
The merged API doesn't use a watch_queue device, but instead relies on
pipes, so let the documentation reflect that.
Fixes: f7e47677e3 ("watch_queue: Add a key/keyring notification facility")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Brendan Jackman added extend atomic operations to the BPF instruction
set in commit 7064a7341a ("Merge branch 'Atomics for eBPF'"), which
introduces the BPF_ATOMIC_OP macro. However, that macro was missing
for the BPF samples. Fix that by adding it into bpf_insn.h.
Fixes: 91c960b005 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/bpf/20210118091753.107572-1-bjorn.topel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Plenty of architectures are already supported and this adds ARM
support.
Signed-off-by: Marc Koderer <marc@koderer.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210112154054.17138-1-marc@koderer.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Pull HID updates from Jiri Kosina:
- AMD SFH (Sensor Fusion Hub) support (Sandeep Singh)
- increase of maximum HID report size to 16KB in order to support some
of the modern devices (Dean Camera)
- control interface support for hidraw (Dean Camera)
- Sony DS4 power and firmware reporting fixes (Roderick Colenbrander)
- support for ghlive PS3/WII U dongles (Pascal Giard)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: i2c-hid: add Vero K147 to descriptor override
HID: ite: Add support for Acer S1002 keyboard-dock
HID: sony: support for ghlive ps3/wii u dongles
HID: hidraw: Add additional hidraw input/output report ioctls.
HID: Increase HID maximum report size to 16KB
HID: elecom: drop stray comment
HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse
HID: elecom: rewrite report based on model specific parameters
HID: wacom: Constify attribute_groups
HID: input: Fix fall-through warnings for Clang
HID: usbhid: Fix fall-through warnings for Clang
HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse
HID: intel-ish-hid: Remove unnecessary assignment to variable rv
HID: sony: Workaround for DS4 dongle hotplug kernel crash.
HID: sony: Don't use fw_version/hw_version for sysfs cleanup.
HID: sony: Report more accurate DS4 power status.
SFH: fix error return check for -ERESTARTSYS
HID: SFH: Add documentation
HID: hid-input: occasionally report stylus battery even if not changed
...
Fix a possible hang in xdpsock that can occur when using multiple
threads. In this case, one or more of the threads might get stuck in
the while-loop in tx_only after the user has signaled the main thread
to stop execution. In this case, no more Tx packets will be sent, so a
thread might get stuck in the aforementioned while-loop. Fix this by
introducing a test inside the while-loop to check if the benchmark has
been terminated. If so, return from the function.
Fixes: cd9e72b6f2 ("samples/bpf: xdpsock: Add option to specify batch size")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201210163407.22066-1-magnus.karlsson@gmail.com
Qualcomm driver updates for v5.11
This adds support for the core power domains on MSM8916, MSM8939, SDM660
and SDX55. It adds SM8150 support to the last-level cache controller
driver and it makes it possible to build the Command DB and RPMh drivers
as modules.
It also contains a slew of smaller cleanups, style and bug fixes
throughout the various drivers.
* tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
soc: qcom: rpmhpd: Add SDX55 power domains
dt-bindings: power: Add rpm power domain bindings for sdx55
soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
samples: qmi: Constify static qmi ops
soc: qcom: pdr: Constify static qmi structs
soc: qcom: initialize local variable
soc: qcom: socinfo: add soc ids for msm8953 variants
soc: qcom: geni: Remove "iova" check
soc: qcom: llcc: Add configuration data for SM8150
dt-bindings: msm: Add LLCC for SM8150
soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header
soc: qcom: kryo-l2-accessors: Fix misnaming of 'val'
soc: qcom: rpmhpd: Provide some missing struct member descriptions
soc: qcom: llcc-qcom: Fix expected kernel-doc formatting
soc: qcom: smp2p: Remove unused struct attribute provide another
soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers
soc: qcom: smsm: Fix some kernel-doc formatting and naming problems
soc: qcom: smem: Fix formatting and missing documentation issues
soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr'
soc: qcom: qcom_aoss: Add missing description for 'cooling_devs'
...
Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a sample program to demonstrate the control and data
plane split. For the control plane part a new program called
xdpsock_ctrl_proc is introduced. For the data plane part, some code
was added to xdpsock_user.c to act as the data plane entity.
Application xdpsock_ctrl_proc works as control entity with sudo
privileges (CAP_SYS_ADMIN and CAP_NET_ADMIN are sufficient) and the
extended xdpsock as data plane entity with CAP_NET_RAW capability
only.
Usage example:
sudo ./samples/bpf/xdpsock_ctrl_proc -i <interface>
sudo ./samples/bpf/xdpsock -i <interface> -q <queue_id>
-n <interval> -N -l -R
Signed-off-by: Mariusz Dudek <mariuszx.dudek@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201203090546.11976-3-mariuszx.dudek@intel.com
Since bpf is not using rlimit memlock for the memory accounting
and control, do not change the limit in sample applications.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-35-guro@fb.com
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8ZzghQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg0JAQCII1bDQyF3APLlNFRqfHf3bTo7Zl5z
WaUd1Cd7JkY+WAD/eF1dWjN0JRtfU+oRlk6UZ4oNmp8WMJvQ7oV26ub2egE=
=lts8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
my_tramp[12]? are declared as global functions in C, but they are not
marked global in the inline assembly definition. This mismatch confuses
Clang's Control-Flow Integrity checking. Fix the definitions by adding
.globl.
Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com
Fixes: 9d907f1ae8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Support for the SO_BUSY_POLL_BUDGET setsockopt, via the batching
option ('b').
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-11-bjorn.topel@gmail.com
Add a new option to xdpsock, 'B', for busy-polling. This option will
also set the batching size, 'b' option, to the busy-poll budget.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-10-bjorn.topel@gmail.com
Start using recvfrom() the l2fwd scenario, instead of poll() which is
more expensive and need additional knobs for busy-polling.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-9-bjorn.topel@gmail.com
Currently the hidraw module can only read and write feature HID reports on
demand, via dedicated ioctls. Input reports are read from the device through
the read() interface, while output reports are written through the write
interface().
This is insufficient; it is desirable in many situations to be able to read and
write input and output reports through the control interface to cover
additional scenarios:
- Reading an input report by its report ID, to get initial state
- Writing an input report, to set initial input state in the device
- Reading an output report by its report ID, to obtain current state
- Writing an output report by its report ID, out of band
This patch adds these missing ioctl requests to read and write the remaining
HID report types. Note that not all HID backends will neccesarily support this
(e.g. while the USB link layer supports setting Input reports, others may not).
Also included are documentation and example updates. The current hidraw
documentation states that feature reports read from the device does *not*
include the report ID, however this is not the case and the returned report
will have its report ID prepended by conforming HID devices, as the report data
sent from the device over the control endpoint must be indentical in format to
those sent over the regular transport.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Numerous refactoring that rewrites BPF programs written with bpf_load
to use the libbpf loader was finally completed, resulting in BPF
programs using bpf_load within the kernel being completely no longer
present.
This commit removes bpf_load, an outdated bpf loader that is difficult
to keep up with the latest kernel BPF and causes confusion.
Also, this commit removes the unused trace_helper and bpf_load from
samples/bpf target objects from Makefile.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-8-danieltimlee@gmail.com
Currently, lwt_len_hist's map lwt_len_hist_map is uses pinning, and the
map isn't cleared on test end. This leds to reuse of that map for
each test, which prevents the results of the test from being accurate.
This commit fixes the problem by removing of pinned map from bpffs.
Also, this commit add the executable permission to shell script
files.
Fixes: f74599f7c5 ("bpf: Add tests and samples for LWT-BPF")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-7-danieltimlee@gmail.com
This commit refactors the existing program with libbpf bpf loader.
Since the kprobe, tracepoint and raw_tracepoint bpf program can be
attached with single bpf_program__attach() interface, so the
corresponding function of libbpf is used here.
Rather than specifying the number of cpus inside the code, this commit
uses the number of available cpus with _SC_NPROCESSORS_ONLN.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-6-danieltimlee@gmail.com
This commit refactors the existing ibumad program with libbpf bpf
loader. Attach/detach of Tracepoint bpf programs has been managed
with the generic bpf_program__attach() and bpf_link__destroy() from
the libbpf.
Also, instead of using the previous BPF MAP definition, this commit
refactors ibumad MAP definition with the new BTF-defined MAP format.
To verify that this bpf program works without an infiniband device,
try loading ib_umad kernel module and test the program as follows:
# modprobe ib_umad
# ./ibumad
Moreover, TRACE_HELPERS has been removed from the Makefile since it is
not used on this program.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-5-danieltimlee@gmail.com
This commit refactors the existing kprobe program with libbpf bpf
loader. To attach bpf program, this uses generic bpf_program__attach()
approach rather than using bpf_load's load_bpf_file().
To attach bpf to perf_event, instead of using previous ioctl method,
this commit uses bpf_program__attach_perf_event since it manages the
enable of perf_event and attach of BPF programs to it, which is much
more intuitive way to achieve.
Also, explicit close(fd) has been removed since event will be closed
inside bpf_link__destroy() automatically.
Furthermore, to prevent conflict of same named uprobe events, O_TRUNC
flag has been used to clear 'uprobe_events' interface.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-4-danieltimlee@gmail.com
This commit refactors the existing cgroup program with libbpf bpf
loader. The original test_cgrp2_sock2 has keeped the bpf program
attached to the cgroup hierarchy even after the exit of user program.
To implement the same functionality with libbpf, this commit uses the
BPF_LINK_PINNING to pin the link attachment even after it is closed.
Since this uses LINK instead of ATTACH, detach of bpf program from
cgroup with 'test_cgrp2_sock' is not used anymore.
The code to mount the bpf was added to the .sh file in case the bpff
was not mounted on /sys/fs/bpf. Additionally, to fix the problem that
shell script cannot find the binary object from the current path,
relative path './' has been added in front of binary.
Fixes: 554ae6e792 ("samples/bpf: add userspace example for prohibiting sockets")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-3-danieltimlee@gmail.com
This commit refactors the existing cgroup programs with libbpf
bpf loader. Since bpf_program__attach doesn't support cgroup program
attachment, this explicitly attaches cgroup bpf program with
bpf_program__attach_cgroup(bpf_prog, cg1).
Also, to change attach_type of bpf program, this uses libbpf's
bpf_program__set_expected_attach_type helper to switch EGRESS to
INGRESS. To keep bpf program attached to the cgroup hierarchy even
after the exit, this commit uses the BPF_LINK_PINNING to pin the link
attachment even after it is closed.
Besides, this program was broken due to the typo of BPF MAP definition.
But this commit solves the problem by fixing this from 'queue_stats' map
struct hvm_queue_stats -> hbm_queue_stats.
Fixes: 36b5d47113 ("selftests/bpf: samples/bpf: Split off legacy stuff from bpf_helpers.h")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-2-danieltimlee@gmail.com
The only usage of qmi_sample_handlers[] and lookup_ops is to pass their
addresses to qmi_handle_init() which accepts const pointers to both
qmi_ops and qmi_msg_handler. Make them const to allow the compiler to
put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201124212954.17750-1-rikard.falkeborn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Increment the statistics over how many Tx packets have been sent at
the time of sending instead of at the time of completion. This as a
completion event means that the buffer has been sent AND returned to
user space. The packet always gets sent shortly after sendto() is
called. The kernel might, for performance reasons, decide to not
return every single buffer to user space immediately after sending,
for example, only after a batch of packets have been
transmitted. Incrementing the number of packets sent at completion,
will in that case be confusing as if you send a single packet, the
counter might show zero for a while even though the packet has been
transmitted.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-2-git-send-email-magnus.karlsson@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tcbpf2_kern.o and related kernel sections are moved to bpf
selftest folder since b05cd74043 ("samples/bpf: remove the bpf tunnel
testsuite."). Remove this one as well.
Fixes: b05cd74043 ("samples/bpf: remove the bpf tunnel testsuite.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-3-liuhangbin@gmail.com
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memlock rlimit is a notorious source of failure for BPF programs. Most
of the samples just set it to infinity, but a few used a lower limit. The
problem with unconditionally setting a lower limit is that this will also
override the limit if the system-wide setting is *higher* than the limit
being set, which can lead to failures on systems that lock a lot of memory,
but set 'ulimit -l' to unlimited before running a sample.
One fix for this is to only conditionally set the limit if the current
limit is lower, but it is simpler to just unify all the samples and have
them all set the limit to infinity.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20201026233623.91728-1-toke@redhat.com
Yaniv reported a compilation error after pulling latest libbpf:
[...]
../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
unknown register name 'r0' in asm
: "r0", "r1", "r2", "r3", "r4", "r5");
[...]
The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.
Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.
Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.
Fixes: 0e9f6841f6 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
- various cleanups for the configfs samples (Bartosz Golaszewski)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IjBILHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYM0WxAAv9JzqdcGdPiPdhfJH/4PTigeo7gFcEaQEj3q1XSS
hcrlsGwAoYZSFT/ZKVHfq8kZAMcRMvfhXZ2WLMmScPV+tFzsFtUP3+smQp9fsfBS
Cg+HCnnwTQnj4zhzLSLMQcX28qt/aG5ssLr8eiD5JxJzNxx9mfV01w3FNBvWbWM7
2ymaQXqdCbR4vRMPrmz8ukTHqCvsy2xbmIELTHx9Tnz1+jFT09S+qjSfL+p+iyQx
+RbzB/Lq1N45TkIqM2NqAKEnwJdQ2rAnBJb+D75wrEgCyvoP5LD8npvPnAzLdtaT
FN2p9I6ST06QEdxGyTJYKpshsTkcp/Qljs5EReeKjuqeGOR/gQKT4oHuvH2ph4OT
x35iN7ErD+TGna0InitiRSMOxM1KFE9vsPGPUIcka8rpEvuOA6ZyXcT3ZnuupR5i
ZGr+JRHLIMAdPimQ9MxsYupBVU8Fan1xMDyVoCDRWsHve+1qjzTafZmTQ8OmGGyK
F+9js2RXuLr+OYUeBiGY+67yxboMuENOQdETCvhWUmHitI5piLFXQyTaUFTZX5yv
NRty3Vw0ts5JywUR+xx7VgTKpbF5pLDEtMcJwcvoSV12ykq7oIQLezHMD0MtAu4N
mWsyXWZHAGphL1GIRbGyKgLoWJVlAzfmg/s3xo+bHiuaw++mvrzqUx4y4NG9UjwH
UCY=
=+IRh
-----END PGP SIGNATURE-----
Merge tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
"Various cleanups for the configfs samples (Bartosz Golaszewski)"
* tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs:
samples: configfs: prefer pr_err() over bare printk(KERN_ERR
samples: configfs: don't use spaces before tabs
samples: configfs: consolidate local variables of the same type
samples: configfs: don't reinitialize variables which are already zeroed
samples: configfs: replace simple_strtoul() with kstrtoint()
samples: configfs: fix alignment in item struct
samples: configfs: drop unnecessary ternary operators
samples: configfs: remove redundant newlines
MAINTAINERS: add the sample directory to the configfs entry
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfh579AAoJEAx081l5xIa+GqoP/0amz+ZN7y/L7+f32CRinJ7/
3e4xjXNDmtWG4Whe/WKjlYmbAcvSdWV/4HYpurW2BFJnOAB/5lIqYcS/PyqErPzA
w4EpRoJ+ZdFgmlDH0vdsDwPLT/HFmhUN9AopNkoZpbSMxrManSj5QgmePXyiKReP
Q+ZAK5UW5AdOVY4bgXUSEkVq2eilCLXf+bSBR/LrVQuNgu7GULX8SIy/Y1CuMtv8
LgzzjLKfIZaIWC+F/RU7BxJ7YnrVq7z7yXnUx8j2416+k/Wwe+BeSUCSZstT7q9G
UkX8jWfR7ZKqhwP+UQeSwDbHkALz7lv88nyjQdxJZ3SrXRe4hy14YjxnR4maeNAj
3TAYSdcAMWyRHqeEZIZ7Hj5sQtTq5OZAoIjxzH3vpVdAnnAkcWoF77pqxV8XPqTC
nw40DihAxQOshGwMkjd5DqkEwnMv43Hs1WTVYu9dPTOfOdqPNt+Vqp7Xl9Z46+kV
k6PDcx60T9ayDW1QZ6MoIXHta9E7ixzu7gYBL3vP4LuporY0uNG3bzF3CMvof1BK
sHYcYTdZkqbTD2d6rHV+TbpPQXgTtlej9qVlQM4SeX37Xtc7LxCYpnpUHKz2S/fK
1vyeGPgdytHblwlxwZOPZ4R2I/HTfnITdr4kMcJHhxAsEewfW1Rd4+stQqVJ2Mph
Vz+CFP2BngivGFz5vuky
=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXz5bNAAKCRCRxhvAZXjc
opfjAP9R/J72yxdd2CLGNZ96hyiRX1NgFDOVUhscOvujYJf8ZwD+OoLmKMvAyFW6
hnMhT1n9Q+aq194hyzChOLQaBTejBQ8=
=4WCX
-----END PGP SIGNATURE-----
Merge tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull kernel_clone() updates from Christian Brauner:
"During the v5.9 merge window we reworked the process creation
codepaths across multiple architectures. After this work we were only
left with the _do_fork() helper based on the struct kernel_clone_args
calling convention. As was pointed out _do_fork() isn't valid
kernelese especially for a helper that isn't just static.
This series removes the _do_fork() helper and introduces the new
kernel_clone() helper. The process creation cleanup didn't change the
name to something more reasonable mainly because _do_fork() was used
in quite a few places. So sending this as a separate series seemed the
better strategy.
I originally intended to send this early in the v5.9 development cycle
after the merge window had closed but given that this was touching
quite a few places I decided to defer this until the v5.10 merge
window"
* tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
sched: remove _do_fork()
tracing: switch to kernel_clone()
kgdbts: switch to kernel_clone()
kprobes: switch to kernel_clone()
x86: switch to kernel_clone()
sparc: switch to kernel_clone()
nios2: switch to kernel_clone()
m68k: switch to kernel_clone()
ia64: switch to kernel_clone()
h8300: switch to kernel_clone()
fork: introduce kernel_clone()
kmemleak-test.c is just a kmemleak test module, which also can not be used
as a built-in kernel module. Thus, i think it may should not be in mm
dir, and move the kmemleak-test.c to samples/kmemleak/kmemleak-test.c.
Fix the spelling of built-in by the way.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Divya Indi <divya.indi@oracle.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: David Howells <dhowells@redhat.com>
Link: https://lkml.kernel.org/r/20200925183729.GA172837@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
Most of the samples were converted to use the new BTF-defined MAP as
they moved to libbpf, but some of the samples were missing.
Instead of using the previous BPF MAP definition, this commit refactors
xdp_monitor and xdp_sample_pkts_kern MAP definition with the new
BTF-defined MAP format.
Also, this commit removes the max_entries attribute at PERF_EVENT_ARRAY
map type. The libbpf's bpf_object__create_map() will automatically
set max_entries to the maximum configured number of CPUs on the host.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010181734.1109-4-danieltimlee@gmail.com
>From commit d7a18ea7e8 ("libbpf: Add generic bpf_program__attach()"),
for some BPF programs, it is now possible to attach BPF programs
with __attach() instead of explicitly calling __attach_<type>().
This commit refactors the __attach_tracepoint() with libbpf's generic
__attach() method. In addition, this refactors the logic of setting
the map FD to simplify the code. Also, the missing removal of
bpf_load.o in Makefile has been fixed.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010181734.1109-3-danieltimlee@gmail.com
To avoid confusion caused by the increasing fragmentation of the BPF
Loader program, this commit would like to change to the libbpf loader
instead of using the bpf_load.
Thanks to libbpf's bpf_link interface, managing the tracepoint BPF
program is much easier. bpf_program__attach_tracepoint manages the
enable of tracepoint event and attach of BPF programs to it with a
single interface bpf_link, so there is no need to manage event_fd and
prog_fd separately.
This commit refactors xdp_monitor with using this libbpf API, and the
bpf_load is removed and migrated to libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010181734.1109-2-danieltimlee@gmail.com
pr_*() printing helpers are preferred over using bare printk().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The copyright notice alarms checkpatch.pl of usin spaces before tabs.
Fix this.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move local variables of the same type into a single line for better
readability.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The structure containing the storeme field is allocated using kzalloc().
There's no need to set it to 0 again.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
simple_strtoul() is deprecated. Use kstrtoint().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Aling the assignment of a static structure's field to be consistent with
all other instances.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Checking pointers for NULL value before passing them to container_of()
is pointless because even if we return NULL from the ternary operator,
none of the users checks the returned value but they instead dereference
it unconditionally. AFAICT this cannot really happen either. Simplify
the code by removing the ternary operators from to_childless() et al.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There's no need for suplemental newlines in the source file - especially
since the examples are well divided with comments already.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add an option to count the number of interrupts generated per second and
total number of interrupts during the lifetime of the application for a
given interface. This information is extracted from /proc/interrupts. Since
there is no naming convention across drivers, the user must provide the
string which is specific to their interface in the /proc/interrupts file on
the command line.
Usage:
./xdpsock ... -I <irq_str>
eg. for queue 0 of i40e device eth0:
./xdpsock ... -I i40e-eth0-TxRx-0
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201002133612.31536-3-ciara.loftus@intel.com
Categorise and record syscalls issued in the xdpsock sample app. The
categories recorded are:
rx_empty_polls: polls when the rx ring is empty
fill_fail_polls: polls when failed to get addr from fill ring
copy_tx_sendtos: sendtos issued for tx when copy mode enabled
tx_wakeup_sendtos: sendtos issued when tx ring needs waking up
opt_polls: polls issued since the '-p' flag is set
Print the stats using '-a' on the xdpsock command line.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201002133612.31536-2-ciara.loftus@intel.com
New statistics will be added in future commits. In preparation for this,
let's split out the existing statistics into their own struct.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201002133612.31536-1-ciara.loftus@intel.com
Compiling samples/bpf hits an error related to fallthrough marking.
...
CC samples/bpf/hbm.o
samples/bpf/hbm.c: In function ‘main’:
samples/bpf/hbm.c:486:4: error: ‘fallthrough’ undeclared (first use in this function)
fallthrough;
^~~~~~~~~~~
The "fallthrough" is not defined under tools/include directory.
Rather, it is "__fallthrough" is defined in linux/compiler.h.
Including "linux/compiler.h" and using "__fallthrough" fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201006043427.1891805-1-yhs@fb.com
With latest llvm trunk, bpf programs under samples/bpf
directory, if using CORE, may experience the following
errors:
LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace.
Stack dump:
0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o
1. Running pass 'Function Pass Manager' on module '<stdin>'.
2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1'
#0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int)
(/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c)
...
#7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e)
#8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*)
(/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5)
#9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*,
unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8)
...
Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o
The reason is due to llvm change https://reviews.llvm.org/D87153
where the CORE relocation global generation is moved from the beginning
of target dependent optimization (llc) to the beginning
of target independent optimization (opt).
Since samples/bpf programs did not use vmlinux.h and its clang compilation
uses native architecture, we need to adjust arch triple at opt level
to do CORE relocation global generation properly. Otherwise, the above
error will appear.
This patch fixed the issue by introduce opt and llvm-dis to compilation chain,
which will do proper CORE relocation global generation as well as O2 level
optimization. Tested with llvm10, llvm11 and trunk/llvm12.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20201006043427.1891742-1-yhs@fb.com
Since struct _mic_vring_info and vring are allocated together and follow
vring, if the vring_size() is not four bytes aligned, which will cause
the start address of struct _mic_vring_info is not four byte aligned.
For example, when vring entries is 128, the vring_size() will be 5126
bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400: 00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.
When EP use ioread32(magic) to reads the magic in RC's share memory, it
will cause kernel panic on ARM64 platform due to the cross-byte io read.
Here read magic in user space use le32toh(vr0->info->magic) will meet
the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info
will store in this way:
0x90002400: 00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If enable DEBUG, will meet the following errors when build mpssd, so fix
them here. Only one error is listed here, other errors are similar.
mpssd.c: In function ‘virtio_net’:
mpssd.c:615:21: error: incompatible type for argument 2 of ‘disp_iovec’
disp_iovec(mic, copy, __func__, __LINE__);
^~~~
mpssd.c:361:1: note: expected ‘struct mic_copy_desc *’ but argument is of type ‘struct mic_copy_desc’
disp_iovec(struct mic_info *mic, struct mic_copy_desc *copy,
^~~~~~~~~~
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20200925071831.8025-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a user space sample for the usage of the ioctl interface provided by
the Nitro Enclaves driver.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Track NE custom error codes for invalid page size, invalid flags and
enclave CID.
* Update the heartbeat logic to have a listener fd first, then start the
enclave and then accept connection to get the heartbeat.
* Update the reference link to the hugetlb documentation.
v6 -> v7
* Track POLLNVAL as poll event in addition to POLLHUP.
v5 -> v6
* Remove "rc" mentioning when printing errno string.
* Remove the ioctl to query API version.
* Include usage info for NUMA-aware hugetlb configuration.
* Update documentation to kernel-doc format.
* Add logic for enclave image loading.
v4 -> v5
* Print enclave vCPU ids when they are created.
* Update logic to map the modified vCPU ioctl call.
* Add check for the path to the enclave image to be less than PATH_MAX.
* Update the ioctl calls error checking logic to match the NE specific
error codes.
v3 -> v4
* Update usage details to match the updates in v4.
* Update NE ioctl interface usage.
v2 -> v3
* Remove the include directory to use the uapi from the kernel.
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* New in v2.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-17-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Please pull a set of fixes for various DRM drivers that finally resolve
incorrect usage of the scatterlists (struct sg_table nents and orig_nents
entries), what causes issues when IOMMU is used.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910080505.24456-1-m.szyprowski@samsung.com
Add a quiet option (-Q) that disables the statistics print outs of
xdpsock. This is good to have when measuring 0% loss rate performance
as it will be quite terrible if the application uses printfs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1599726666-8431-4-git-send-email-magnus.karlsson@gmail.com
Quentin Monnet