Now that the type changes are done, here is the final set of
changes to make the quota code work when user namespaces are enabled.
Small cleanups and fixes to make the code build when user namespaces
are enabled.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert w_dq_id to be a struct kquid and remove the now unncessary
w_dq_type.
This is a simple conversion and enough other places have already
been converted that this actually reduces the code complexity
by a little bit, when removing now unnecessary type conversions.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Change struct dquot dq_id to a struct kqid and remove the now
unecessary dq_type.
Make minimal changes to dquot, quota_tree, quota_v1, quota_v2, ext3,
ext4, and ocfs2 to deal with the change in quota structures and
signatures. The ocfs2 changes are larger than most because of the
extensive tracing throughout the ocfs2 quota code that prints out
dq_id.
quota_tree.c:get_index is modified to take a struct kqid instead of a
qid_t because all of it's callers pass in dquot->dq_id and it allows
me to introduce only a single conversion.
The rest of the changes are either just replacing dq_type with dq_id.type,
adding conversions to deal with the change in type and occassionally
adding qid_eq to allow quota id comparisons in a user namespace safe way.
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify dqget to take struct kqid instead of a type and an identifier
pair.
Modify the callers of dqget in ocfs2 and dquot to take generate
a struct kqid so they can continue to call dqget. The conversion
to create struct kqid should all be the final conversions that
are needed in those code paths.
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify quota_send_warning to take struct kqid instead a type and
identifier pair.
When sending netlink broadcasts always convert uids and quota
identifiers into the intial user namespace. There is as yet no way to
send a netlink broadcast message with different contents to receivers
in different namespaces, so for the time being just map all of the
identifiers into the initial user namespace which preserves the
current behavior.
Change the callers of quota_send_warning in gfs2, xfs and dquot
to generate a struct kqid to pass to quota send warning. When
all of the user namespaces convesions are complete a struct kqid
values will be availbe without need for conversion, but a conversion
is needed now to avoid needing to convert everything at once.
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update the quotactl user space interface to successfull compile with
user namespaces support enabled and to hand off quota identifiers to
lower layers of the kernel in struct kqid instead of type and qid
pairs.
The quota on function is not converted because while it takes a quota
type and an id. The id is the on disk quota format to use, which
is something completely different.
The signature of two struct quotactl_ops methods were changed to take
struct kqid argumetns get_dqblk and set_dqblk.
The dquot, xfs, and ocfs2 implementations of get_dqblk and set_dqblk
are minimally changed so that the code continues to work with
the change in parameter type.
This is the first in a series of changes to always store quota
identifiers in the kernel in struct kqid and only use raw type and qid
values when interacting with on disk structures or userspace. Always
using struct kqid internally makes it hard to miss places that need
conversion to or from the kernel internal values.
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add the data type struct kqid which holds the kernel internal form of
the owning identifier of a quota. struct kqid is a replacement for
the implicit union of uid, gid and project id stored in an unsigned
int and the quota type field that is was used in the quota data
structures. Making the data type explicit allows the kuid_t and
kgid_t type safety to propogate more thoroughly through the code,
revealing more places where uid/gid conversions need be made.
Along with the data type struct kqid comes the helper functions
qid_eq, qid_lt, from_kqid, from_kqid_munged, qid_valid, make_kqid,
make_kqid_invalid, make_kqid_uid, make_kqid_gid.
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Implement kprojid_t a cousin of the kuid_t and kgid_t.
The per user namespace mapping of project id values can be set with
/proc/<pid>/projid_map.
A full compliment of helpers is provided: make_kprojid, from_kprojid,
from_kprojid_munged, kporjid_has_mapping, projid_valid, projid_eq,
projid_eq, projid_lt.
Project identifiers are part of the generic disk quota interface,
although it appears only xfs implements project identifiers currently.
The xfs code allows anyone who has permission to set the project
identifier on a file to use any project identifier so when
setting up the user namespace project identifier mappings I do
not require a capability.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert ext2, ext3, and ext4 to fully support the posix acl changes,
using e_uid e_gid instead e_id.
Enabled building with posix acls enabled, all filesystems supporting
user namespaces, now also support posix acls when user namespaces are enabled.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Pass the user namespace the uid and gid values in the xattr are stored
in into posix_acl_from_xattr.
- Pass the user namespace kuid and kgid values should be converted into
when storing uid and gid values in an xattr in posix_acl_to_xattr.
- Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to
pass in &init_user_ns.
In the short term this change is not strictly needed but it makes the
code clearer. In the longer term this change is necessary to be able to
mount filesystems outside of the initial user namespace that natively
store posix acls in the linux xattr format.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- In setxattr if we are setting a posix acl convert uids and gids from
the current user namespace into the initial user namespace, before
the xattrs are passed to the underlying filesystem.
Untranslatable uids and gids are represented as -1 which
posix_acl_from_xattr will represent as INVALID_UID or INVALID_GID.
posix_acl_valid will fail if an acl from userspace has any
INVALID_UID or INVALID_GID values. In net this guarantees that
untranslatable posix acls will not be stored by filesystems.
- In getxattr if we are reading a posix acl convert uids and gids from
the initial user namespace into the current user namespace.
Uids and gids that can not be tranlsated into the current user namespace
will be represented as -1.
- Replace e_id in struct posix_acl_entry with an anymouns union of
e_uid and e_gid. For the short term retain the e_id field
until all of the users are converted.
- Don't set struct posix_acl.e_id in the cases where the acl type
does not use e_id. Greatly reducing the use of ACL_UNDEFINED_ID.
- Rework the ordering checks in posix_acl_valid so that I use kuid_t
and kgid_t types throughout the code, and so that I don't need
arithmetic on uid and gid types.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- When tracing capture the kuid.
- When displaying the data to user space convert the kuid into the
user namespace of the process that opened the report file.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
BSD process accounting conveniently passes the file the accounting
records will be written into to do_acct_process. The file credentials
captured the user namespace of the opener of the file. Use the file
credentials to format the uid and the gid of the current process into
the user namespace of the user that started the bsd process
accounting.
Cc: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Explicitly limit exit task stat broadcast to the initial user and
pid namespaces, as it is already limited to the initial network
namespace.
- For broadcast task stats explicitly generate all of the idenitiers
in terms of the initial user namespace and the initial pid
namespace.
- For request stats report them in terms of the current user namespace
and the current pid namespace. Netlink messages are delivered
syncrhonously to the kernel allowing us to get the user namespace
and the pid namespace from the current task.
- Pass the namespaces for representing pids and uids and gids
into bacct_add_task.
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Explicitly format uids gids in audit messges in the initial user
namespace. This is safe because auditd is restrected to be in
the initial user namespace.
- Convert audit_sig_uid into a kuid_t.
- Enable building the audit code and user namespaces at the same time.
The net result is that the audit subsystem now uses kuid_t and kgid_t whenever
possible making it almost impossible to confuse a raw uid_t with a kuid_t
preventing bugs.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Always store audit loginuids in type kuid_t.
Print loginuids by converting them into uids in the appropriate user
namespace, and then printing the resulting uid.
Modify audit_get_loginuid to return a kuid_t.
Modify audit_set_loginuid to take a kuid_t.
Modify /proc/<pid>/loginuid on read to convert the loginuid into the
user namespace of the opener of the file.
Modify /proc/<pid>/loginud on write to convert the loginuid
rom the user namespace of the opener of the file.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Paul Moore <paul@paul-moore.com> ?
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The audit filter code guarantees that uid are always compared with
uids and gids are always compared with gids, as the comparason
operations are type specific. Take advantage of this proper to define
audit_uid_comparator and audit_gid_comparator which use the type safe
comparasons from uidgid.h.
Build on audit_uid_comparator and audit_gid_comparator and replace
audit_compare_id with audit_compare_uid and audit_compare_gid. This
is one of those odd cases where being type safe and duplicating code
leads to simpler shorter and more concise code.
Don't allow bitmask operations in uid and gid comparisons in
audit_data_to_entry. Bitmask operations are already denined in
audit_rule_to_entry.
Convert constants in audit_rule_to_entry and audit_data_to_entry into
kuids and kgids when appropriate.
Convert the uid and gid field in struct audit_names to be of type
kuid_t and kgid_t respectively, so that the new uid and gid comparators
can be applied in a type safe manner.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The only place we use the uid and the pid that we calculate in
audit_receive_msg is in audit_log_common_recv_msg so move the
calculation of these values into the audit_log_common_recv_msg.
Simplify the calcuation of the current pid and uid by
reading them from current instead of reading them from
NETLINK_CREDS.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For user generated audit messages set the portid field in the netlink
header to the netlink port where the user generated audit message came
from. Reporting the process id in a port id field was just nonsense.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Use current instead of looking up the current up the current task by
process identifier. Netlink requests are processed in trhe context of
the sending task so this is safe.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that netlink messages are processed in the context of the sender
tty_audit_push_task can be called directly and audit_prepare_user_tty
which only added looking up the task of the tty by process id is
not needed.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Get caller process uid and gid and pid values from the current task
instead of the NETLINK_CB. This is simpler than passing NETLINK_CREDS
from from audit_receive_msg to audit_filter_user_rules and avoid the
chance of being hit by the occassional bugs in netlink uid/gid
credential passing. This is a safe changes because all netlink
requests are processed in the task of the sending process.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This allows the code to safely make the assumption that all of the
uids gids and pids that need to be send in audit messages are in the
initial namespaces.
If someone cares we may lift this restriction someday but start with
limiting access so at least the code is always correct.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In net/dns_resolver/dns_key.c and net/rxrpc/ar-key.c make them
work with user namespaces enabled where key_alloc takes kuids and kgids.
Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID instead of bare 0's.
Cc: Sage Weil <sage@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: linux-afs@lists.infradead.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Replace key_user ->user_ns equality checks with kuid_has_mapping checks.
- Use from_kuid to generate key descriptions
- Use kuid_t and kgid_t and the associated helpers instead of uid_t and gid_t
- Avoid potential problems with file descriptor passing by displaying
keys in the user namespace of the opener of key status proc files.
Cc: linux-security-module@vger.kernel.org
Cc: keyrings@linux-nfs.org
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Blink Blink this had not been converted to use struct pid ages ago?
- On drm open capture the openers kuid and struct pid.
- On drm close release the kuid and struct pid
- When reporting the uid and pid convert the kuid and struct pid
into values in the appropriate namespace.
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Store the ipc owner and creator with a kuid
- Store the ipc group and the crators group with a kgid.
- Add error handling to ipc_update_perms, allowing it to
fail if the uids and gids can not be converted to kuids
or kgids.
- Modify the proc files to display the ipc creator and
owner in the user namespace of the opener of the proc file.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Only allow asking for events from the initial user and pid namespace,
where we generate the events in.
- Convert kuids and kgids into the initial user namespace to report
them via the process event connector.
Cc: David Miller <davem@davemloft.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Enable building of pf_key sockets and user namespace support at the
same time. This combination builds successfully so there is no reason
to forbid it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There is a dereference before checking for NULL bug here. Generally
free() functions should accept NULL pointers. For example, fl_create()
can pass a NULL pointer to fl_free() on the error path.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Maxim Krasnyansky <maxk@qualcomm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Only allow adding matches from the initial user namespace
- Add the appropriate conversion functions to handle matches
against sockets in other user namespaces.
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
xt_recent creates a bunch of proc files and initializes their uid
and gids to the values of ip_list_uid and ip_list_gid. When
initialize those proc files convert those values to kuids so they
can continue to reside on the /proc inode.
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jan Engelhardt <jengelh@medozas.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
xt_LOG always writes messages via sb_add via printk. Therefore when
xt_LOG logs the uid and gid of a socket a packet came from the
values should be converted to be in the initial user namespace.
Thus making xt_LOG as user namespace safe as possible.
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The flow classifier can use uids and gids of the sockets that
are transmitting packets and do insert those uids and gids
into the packet classification calcuation. I don't fully
understand the details but it appears that we can depend
on specific uids and gids when making traffic classification
decisions.
To work with user namespaces enabled map from kuids and kgids
into uids and gids in the initial user namespace giving raw
integer values the code can play with and depend on.
To avoid issues of userspace depending on uids and gids in
packet classifiers installed from other user namespaces
and getting confused deny all packet classifiers that
use uids or gids that are not comming from a netlink socket
in the initial user namespace.
Cc: Patrick McHardy <kaber@trash.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Changli Gao <xiaosuo@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
cls_flow.c plays with uids and gids. Unless I misread that
code it is possible for classifiers to depend on the specific uid and
gid values. Therefore I need to know the user namespace of the
netlink socket that is installing the packet classifiers. Pass
in the rtnetlink skb so I can access the NETLINK_CB of the passed
packet. In particular I want access to sk_user_ns(NETLINK_CB(in_skb).ssk).
Pass in not the user namespace but the incomming rtnetlink skb into
the the classifier change routines as that is generally the more useful
parameter.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
At logging instance creation capture the peer netlink socket's user
namespace. Use the captured peer user namespace when reporting socket
uids to the peer.
The peer socket's user namespace is guaranateed to be valid until the user
closes the netlink socket. nfnetlink_log removes instances during the final
close of a socket. __build_packet_message does not get called after an
instance is destroyed. Therefore it is safe to let the peer netlink socket
take care of the user namespace reference counting for us.
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Compute the user namespace of the socket that we are replying to
and translate the kuids of reported sockets into that user namespace.
Cc: Andrew Vagin <avagin@openvz.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add a helper sk_user_ns to make it easy to find the user namespace
of the process that opened a socket.
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The sending socket of an skb is already available by it's port id
in the NETLINK_CB. If you want to know more like to examine the
credentials on the sending socket you have to look up the sending
socket by it's port id and all of the needed functions and data
structures are static inside of af_netlink.c. So do the simple
thing and pass the sending socket to the receivers in the NETLINK_CB.
I intend to use this to get the user namespace of the sending socket
in inet_diag so that I can report uids in the context of the process
who opened the socket, the same way I report uids in the contect
of the process who opens files.
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
There is a least one modular user so export free_pid_ns so modules can
capture and use the pid namespace on the very rare occasion when it
makes sense.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Correct a long standing omission and use struct pid in the owner
field of struct ip6_flowlabel when the share type is IPV6_FL_S_PROCESS.
This guarantees we don't have issues when pid wraparound occurs.
Use a kuid_t in the owner field of struct ip6_flowlabel when the
share type is IPV6_FL_S_USER to add user namespace support.
In /proc/net/ip6_flowlabel capture the current pid namespace when
opening the file and release the pid namespace when the file is
closed ensuring we print the pid owner value that is meaning to
the reader of the file. Similarly use from_kuid_munged to print
uid values that are meaningful to the reader of the file.
This requires exporting pid_nr_ns so that ipv6 can continue to built
as a module. Yoiks what silliness
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Store sysctl_ping_group_range as a paire of kgid_t values
instead of a pair of gid_t values.
- Move the kgid conversion work from ping_init_sock into ipv4_ping_group_range
- For invalid cases reset to the default disabled state.
With the kgid_t conversion made part of the original value sanitation
from userspace understand how the code will react becomes clearer
and it becomes possible to set the sysctl ping group range from
something other than the initial user namespace.
Cc: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Eric W. Biederman