The information which is currently provided as a response to the
"HL_INFO_HW_IDLE" IOCTL is merely a general boolean value.
This patch extends it and provides also a bitmask that indicates which
of the device engines are busy.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Command submissions sent to the device are composed of command buffers
which are targeted to different device engines, like DMA and compute
entities. When a command submission gets stuck, knowing in which engine
the stuck is, is crucial for debugging.
This patch adds a debugfs node that exports this information, by
displaying the engines' various registers that assemble their idle/busy
status.
The information retrieval is based on the is_device_idle ASIC function.
The printout in this function, of the first detected busy engine, is
removed because it becomes redundant in the presence of the more
elaborated info of the new debugfs node.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The patch updates the device idle check:
- Add reading the DMA core status register, because it is possible that
a QMAN has finished its work but the DMA itself is still running.
- Remove the MME shadow status check, as the MME ARCH status register
includes the status of all MME shadows.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allows using the addr/data32 debugfs nodes to access a device VA of a
host mapped memory when the IOMMU is disabled.
Due to the possible large amount of a user host mapped memory, the
driver doesn't maintain a database with the host addresses per device VA.
When the IOMMU is disabled, this missing info is being overcome by
simply using phys_to_virt(). However, this is not useful when the IOMMU
is enabled, and thus the enforced limitation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch checks if an MMU mapping is erroneous in that the physical
address that is being mapped is NOT divisible by the page size.
If that thing happens, then the H/W will issue a transaction which will be
translated to a wrong address, because part of the address will not be
taken (the remainder of address/page size).
Because the physical address is being handled by the driver, a WARN is
suitable here as it implies a bug in the driver code itself and not a user
bug.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes the non-standard DMA mask setting for Goya. Now that
the device CPU goes through the MMU, we are not limited to allocating the
CPU accessible memory area in the address space of under 39 bits.
Therefore, we don't need to set the DMA masking twice during
initialization, a practice that is not working on POWER architecture.
The patch sets the DMA mask to 48 bits once during the initialization. The
address of the CPU accessible memory area is configured to the MMU and the
matching VA is given to the device CPU.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch configures the Goya CPU to actually go through the MMU for
translation. The configuration is done after the configuration of the
relevant MMU mappings.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the necessary MMU mappings for the Goya CPU to access the
device DRAM and the host memory.
The first 256MB of the device DRAM is being mapped. That's where the F/W
is running.
The 2MB area located on the host memory for the purpose of communication
between the driver and the device CPU is also being mapped.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch initializes the MMU structures for the kernel context. This is
needed before we can configure mappings for the kernel context.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch initializes the MMU S/W structures before the VM S/W
structures, instead of doing that as part of the VM S/W initialization.
This is done because we need to configure some MMU mappings for the kernel
context, before the VM is initialized. The VM initialization can't be
moved earlier because it depends on the size of the DRAM, which is
retrieved from the device CPU. Communication with the device CPU will
require the MMU mappings to be configured and hence the de-coupling.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes the order of H/W IP initializations. The MMU needs to
be initialized before the device CPU queues, because the CPU will go
through the ASIC MMU in order to reach the host memory (where the queues
are located).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes the print of an error message about mis-configuration
of the debug infrastructure to be rate-limited, to prevent flooding of
kernel log, as these configuration requests can come at a high rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes two code sections in the common code that contain code
which is only relevant for simulator support (which is not upstreamed).
This removal saves the need to update this code upstream, which is not
needed anyway.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
unsecured registers can be changed by the user, and hence should be
restored to their default values in context switch
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On context switch we need to ensure that each user is not be affected by
other user, so we need to clear sync objects and monitors in context
switch instead of in restore_phase_topology function.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Set protection bits for some tpc registers that should to be
secured.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes a limitation on the maximum packet size that is read by
the device CPU as that limitation is not needed.
Therefore, the patch also removes an elaborate calculation that is based
on this limitation which is also not needed now. Instead, use a fixed
value for the memory pool size of the packets.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds support to the goya memset function to perform memset to
device memory with size larger then 4GB. In this case, we need to use
multiple LIN_DMA packets because a single packet supports up to 4GB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch improves the error reporting in case of fatal and non-RAZWI
events such that the event name is printed in addition to the IRQ number.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch increases the timeout for PCI ELBI configuration to support low
frequency Palladium images.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a new parameter that is passed to the
add_end_of_cb_packets() asic-specific function.
The parameter is the pointer to the driver's device structure. The
function needs this pointer for future ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes two polling functions to macros, in order to make their
API the same as the standard readl_poll_timeout so we would be able to
define the "condition for exit" when calling these macros.
This will simplify the code as it will eliminate the need to check both
for timeout and for the (cond) in the calling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The driver allocates memory for fence object with GFP_ZERO flag, so there
is no need to explicitly write 0 to the allocated object after the
allocation.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Driver-initiated DMA jobs are synchronized jobs, i.e. the driver polls on
fence object until the job is finished. There is no interrupt from the
device. Therefore, no need to add space for 2 * msg_prot packets to the
end of the CB. Only a single msg_prot is needed (to write the fence).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes the order of checks when initializing the device CPU.
We want first to check if we need to load the F/W, and only if we need to,
then we want to check the status of the CPU boot program.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes some dead code that performs checks about variables
with hard-coded values.
The patch also moves the initialization of those variables to a separate
function, that will possibly have different values per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the implementation of the HL_DEBUG_OP_SET_MODE opcode in
the DEBUG IOCTL.
It forces the user who wants to debug the device to set the device into
debug mode before he can configure the debug engines. The patch also makes
sure to disable debug mode upon user releasing FD, in case the user forgot
to disable debug mode.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch fixes comments on various structure members and some spelling
errors in log messages.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes redundant CPU availability checks in:
goya_test_queues() - will be done in goya_test_cpu_queue().
goya_ring_doorbell() - was done earlier in goya_send_cpu_message().
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch improves the error message that is shown when a new user tries
to open a new FD while there is already an existing user that is working
on the device.
It also improves the error message in case of missing firmware file.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We cannot cast a 64-bit integer to a pointer on 32-bit architectures
without a warning:
drivers/misc/habanalabs/habanalabs_ioctl.c: In function 'debug_coresight':
drivers/misc/habanalabs/habanalabs_ioctl.c:143:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
input = memdup_user((const void __user *) args->input_ptr,
Use the macro that was defined for this purpose.
Fixes: 315bc055ed ("habanalabs: add new IOCTL for debug, tracing and profiling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Here are some small char and misc driver fixes for 5.2-rc4 to resolve a
number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs fixes.
Those changes move the header file info into sysfs and fixes the build
issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuEVg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yma0QCfVPa7r1rHqljz1UgvjKJTzVg8g9wAn1W1mddx
MIlG+0+ZnBdaPzyzoY1O
=0LJD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
The trace buffer address is 40 bits wide.
The end of the buffer is set in the RWP register (lower 32 bits), and in
the RWPHI register (upper 8 bits).
Currently only the lower 32 bits are read, and this patch fixes it and
concatenates the upper 8 bits to the output address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The debugfs interface for accessing DRAM virtual addresses currently
uses the 12 LSBs of a virtual address as an offset.
However, it should use the 20 LSBs in case the device MMU page size is
2MB instead of 4KB.
This patch fixes the offset calculation to be based on the page size.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch fix a bug in the mmu code that checks whether we can use huge
page mappings for host pages.
The code is supposed to enable huge page mappings only if ALL DMA
addresses are aligned to 2MB AND the number of pages in each DMA chunk is
a modulo of the number of pages in 2MB. However, the code ignored the
first requirement for the first DMA chunk.
This patch fix that issue by making sure the requirement of address
alignment is validated against all DMA chunks.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The MMU cache mutex is used in the ASIC hw_init() functions, but it is
initialized only later in hl_mmu_init().
This patch prevents it by moving the initialization to the
device_early_init() function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This fixes multiple things in the habanalabs debugfs code, in particular:
- mmu_write() was unnecessarily verbose, copying around between multiple
buffers
- mmu_write() could write a user-specified, unbounded amount of userspace
memory into a kernel buffer (out-of-bounds write)
- multiple debugfs read handlers ignored the user-supplied count,
potentially corrupting out-of-bounds userspace data
- hl_device_read() was unnecessarily verbose
- hl_device_write() could read uninitialized stack memory
- multiple debugfs read handlers copied terminating null characters to
userspace
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
This patch fix a potential bug where a user's process has closed
unexpectedly without disabling the debug engines. In that case, the debug
engines might continue running but because the user's MMU mappings are
going away, we will get page fault errors.
This behavior is also opposed to the general rule where nothing runs on
the device after the user process closes.
The patch stops the debug H/W engines upon process termination and thus
makes sure nothing runs on the device after the process goes away.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CPU accessible DMA memory is general and not used only for PQ.
Accordingly, this patch renames the "free_cpu_pq_dma_mem" label with
"free_cpu_dma_mem".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The CPU accessible DMA pool is general and not used only for PQ.
Accordingly, this patch rename the "free_cpu_pq_pool" label with
"free_cpu_accessible_dma_pool".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Where there is a spike in the CPU consumption, it may cause
random failures in the C/I since the KMD timeout for CPU
and/or QMAN0 jobs expires and it stops communicating to the simulator.
This commit fixes it by increasing timeout on polling functions
if working with simulator.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
After removing the parsing of the command submission
when doing memset of the device memory, goya_validate_dma_pkt_host
is never called by the kernel, so there is no need to check
context id.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
use_virt_addr member was used for telling whether to treat the
addresses in the CB as virtual during parsing. We disabled it only
when calling the parser from the driver memset device function,
and since this call had been removed, it should always be enabled.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Routing device accesses to the host memory requires the usage of a base
offset, which is canceled by the iATU just before leaving the device.
The value of the base offset might be distinctive between different ASIC
types.
The manipulation of the addresses is currently used throughout the
driver code, and one should be aware to it whenever providing a host
memory address to the device.
This patch removes this manipulation from the driver common code, and
moves it to the ASIC specific functions that are responsible for
host memory allocation/mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch renames four functions in the ASIC-specific functions section,
so it will be easier to differentiate them from the generic kernel
functions with the same name.
This will help in future code reviews, to make sure we don't use the
kernel functions directly.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There is no need to parse the command submission when doing memset
of the device memory using the DMA engine because only the driver calls
the memset function and therefore, the CS is trusted and doesn't require
validation and patching.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device's CPU accessible memory on host is managed in a dedicated
pool, except for 2 regions - Primary Queue (PQ) and Event Queue (EQ) -
which are allocated from generic DMA pools.
Due to address length limitations of the CPU, the addresses of all these
memory regions must have the same MSBs starting at bit 40.
This patch modifies the allocation of the PQ and EQ to be also from the
dedicated pool, to ensure compliance with the limitation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes the ASIC interface function that changes the DRAM bar
window. The change is to return the old address that the DRAM bar pointed
to instead of an error code.
This simplifies the code that use this function (mainly in debugfs) to
restore the bar to the old setting.
This is also needed for easier support in future ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch only does renaming of certain variables and structure members,
and their accompanied comments.
This is done to better reflect the actions these variables and members
represent.
There is no functional change in this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tomer Tayar