Make the command line parsing more robust, by handling the case it is
not NUL-terminated.
Use strnlen instead of strlen, and make sure that the temporary copy is
NUL-terminated before parsing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200813185811.554051-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Treat a NULL cmdline the same as empty. Although this is unlikely to
happen in practice, the x86 kernel entry does check for NULL cmdline and
handles it, so do it here as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200729193300.598448-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
destroy_workqueue() should be called to destroy efi_rts_wq
when efisubsys_init() init resources fails.
Cc: <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When remapping the kernel rodata section RO in the EFI pagetables, the
protection flags that were used for the text section are being reused,
but the rodata section should not be marked executable.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200717194526.3452089-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
dev_pm_opp_set_rate() can now be called with freq = 0 in order
to either drop performance or bandwidth votes or to disable
regulators on platforms which support them.
In such cases, a subsequent call to dev_pm_opp_set_rate() with
the same frequency ends up returning early because 'old_freq == freq'
Instead make it fall through and put back the dropped performance
and bandwidth votes and/or enable back the regulators.
Cc: v5.3+ <stable@vger.kernel.org> # v5.3+
Fixes: cd7ea58286 ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes")
Reported-by: Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Don't skip clk_set_rate() and massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
../arch/x86/pci/xen.c: In function ‘pci_xen_init’:
../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
acpi_noirq_set();
Fixes: 88e9ca161c ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
Fixes: 38ac0287b7 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This reverts commit 9c9b17a7d1.
Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo introduced during recent code cleanup, which could lead to
silently not freeing resources or an oops message (on PCI hotplug or
CAPI reset).
Only impacts ioda2, the code path for ioda1 is correct.
Fixes: 01e12629af ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819130741.16769-1-fbarrat@linux.ibm.com
Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit
8dcf2ad39f ("net: atlantic: add hwmon getter for MAC temperature")
implemented a read callback with an udelay(10000U). This fails to
compile on ARM because the delay is >1ms. I doubt that it is needed to
spin for 10ms even if possible on x86.
>From looking at the code, the context appears to be preemptible so using
usleep() should work and avoid busy spinning.
Use readx_poll_timeout() in the poll loop.
Fixes: 8dcf2ad39f ("net: atlantic: add hwmon getter for MAC temperature")
Cc: Mark Starovoytov <mstarovoitov@marvell.com>
Cc: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The old code for i2c write would break on some controllers, which fails
at handling Repeated Start Condition. So we will just use i2c_master_send
to handle write in one transanction.
Changes since v1:
- Remove indentation change
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.
Fixes: d07dcf9aad ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shay Agroskin says:
====================
Bug fixes for ENA ethernet driver
This series adds the following:
- Fix undesired call to ena_restore after returning from suspend
- Fix condition inside a WARN_ON
- Fix overriding previous value when updating missed_tx statistic
v1->v2:
- fix bug when calling reset routine after device resources are freed (Jakub)
v2->v3:
- fix wrong hash in 'Fixes' tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.
This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.
Fixes: 11095fdb71 ("net: ena: add statistics for missed tx packets")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ena_del_napi_in_range() function unregisters the napi handler for
rings in a given range.
This function had the following WARN_ON macro:
WARN_ON(ENA_IS_XDP_INDEX(adapter, i) &&
adapter->ena_napi[i].xdp_ring);
This macro prints the call stack if the expression inside of it is
true [1], but the expression inside of it is the wanted situation.
The expression checks whether the ring has an XDP queue and its index
corresponds to a XDP one.
This patch changes the expression to
!ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring
which indicates an unwanted situation.
Also, change the structure of the function. The napi handler is
unregistered for all rings, and so there's no need to check whether the
index is an XDP index or not. By removing this check the code becomes
much more readable.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.
This creates the following bug:
The driver is suspended and the ena_suspend() function is called
-> This function calls ena_destroy_device() to free the net device
resources
-> The driver waits for the timer routine to finish
its execution and then cancels it, thus preventing from it
to be called again.
If, in its final execution, the timer routine schedules a reset,
the reset routine might be called afterwards,and a redundant call to
ena_restore_device() would be made.
By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.
The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.
Fixes: 8c5c7abdeb ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes to the DT PCI bus parsing made it mandatory for
device tree nodes describing a PCI controller to have the
'device_type = "pci"' property for the node to be matched.
Although this follows the letter of the specification, it
breaks existing device-trees that have been working fine
for years. Rockchip rk3399-based systems are a prime example
of such collateral damage, and have stopped discovering their
PCI bus.
In order to paper over it, let's add a workaround to the code
matching the device type, and accept as PCI any node that is
named "pcie",
A warning will hopefully nudge the user into updating their
DT to a fixed version if they can, but the incentive is
obviously pretty small.
Fixes: 2f96593ecc ("of_address: Add bus type match for pci ranges parser")
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200819094255.474565-1-maz@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
gcc can transform the loop in a naive implementation of memset/memcpy
etc into a call to the function itself. This optimization is enabled by
-ftree-loop-distribute-patterns.
This has been the case for a while, but gcc-10.x enables this option at
-O2 rather than -O3 as in previous versions.
Add -ffreestanding, which implicitly disables this optimization with
gcc. It is unclear whether clang performs such optimizations, but
hopefully it will also not do so in a freestanding environment.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commits
c041b5ad86 ("x86, boot: Create a separate string.h file to provide standard string functions")
fb4cac573e ("x86, boot: Move memcmp() into string.h and string.c")
the decompressor stub has been using the compiler's builtin memcpy,
memset and memcmp functions, _except_ where it would likely have the
largest impact, in the decompression code itself.
Remove the #undef's of memcpy and memset in misc.c so that the
decompressor code also uses the compiler builtins.
The rationale given in the comment doesn't really apply: just because
some functions use the out-of-line version is no reason to not use the
builtin version in the rest.
Replace the comment with an explanation of why memzero and memmove are
being #define'd.
Drop the suggestion to #undef in boot/string.h as well: the out-of-line
versions are not really optimized versions, they're generic code that's
good enough for the preboot environment. The compiler will likely
generate better code for constant-size memcpy/memset/memcmp if it is
allowed to.
Most decompressors' performance is unchanged, with the exception of LZ4
and 64-bit ZSTD.
Before After ARCH
LZ4 73ms 10ms 32
LZ4 120ms 10ms 64
ZSTD 90ms 74ms 64
Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels.
Decompressor code size has small differences, with the largest being
that 64-bit ZSTD decreases just over 2k. The largest code size increase
was on 64-bit XZ, of about 400 bytes.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Nick Terrell <nickrterrell@gmail.com>
Tested-by: Nick Terrell <nickrterrell@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently use system_wq, which is unbounded in terms of number of
workers. This means that if we're exiting tons of rings at the same
time, then we'll briefly spawn tons of event kworkers just for a very
short blocking time as the rings exit.
Use system_unbound_wq instead, which has a sane cap on the concurrency
level.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reorganize the if statement of ext4_mb_release_context(), make it
easier to read.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/5439ac6f-db79-ad68-76c1-a4dda9aa0cc3@gmail.com
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lost chunks are when some other process raced with the current thread
to grab a particular block allocation. Add mb_debug log for
developers who wants to see how often this is happening for a
particular workload.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/0a165ac0-1912-aebd-8a0d-b42e7cd1aea1@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the unnecessary chksum_err and checksum_seen variables as well as
some redundant code to make the function easier to understand.
[ With changes suggested by jack@ and tytso@ ]
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200819122955.33526-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.
Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.
Fixes: 67ae482a59 ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b302a2e688)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12. Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.
There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.
Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.
Fixes: 14d1b9a624 ("drm/i915: buddy allocator")
Signed-off-by: George Spelvin <lkml@sdf.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 21118e8e56)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the case of calling check_digital_port_conflicts() failed, a
negative error code -EINVAL should be returned.
Fixes: bf5da83e4b ("drm/i915: Move check_digital_port_conflicts() earier")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 66b51b801d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.
Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.
Bspec 49218
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ecb40d0826)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since we use the module parameters stored inside the drm_i915_device
itself, we need to ensure the mock i915_device also sets up the right
defaults.
Fixes: 8a25c4be58 ("drm/i915/params: switch to device specific parameters")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 98ef067453)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 27e897beec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A bunch of fixes that came in during the merge window, mostly for issues
that were uncovered by the changes to report errors on invalid register
access plus one important fix in that code itself.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl88HrYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JA2B/900+o6U6GH+uqk0HfHPt+Kj0cFHHE5
AS88HxKDNQztj2MQwGKQMzbPCUyHLhlzgaqYXx1++9pWmfJ7DOs646UhQ2VenKB8
nVxpkv9FZbdIDiLuEHPL+i+nzcIzPBYR7Hxcn37pqaYzG+DvNAl8VuSufZueQkXi
qVfVT2sCyNDNMnLl/HZ2RwE/sbS43nqn8LH4+Y4dDcIRR9wdVyMWEGBJ4WYlMFOv
3tjg6b9PlRo40RT5CCTcPeTIFniIv8c76TTpUwtvb+fjVMWYnLh9BbDNEa903AGP
AU8CaM3ZEw15NZ008G9Bs04z6WqS/ZCeJTaXK8heKEsSjdsceKDEaicC
=cmGI
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.9
A bunch of fixes that came in during the merge window, mostly for issues
that were uncovered by the changes to report errors on invalid register
access plus one important fix in that code itself.
When the error code is EAGAIN, the kernel signals the user
space should retry the read() operation for bpf iterators.
Let us do it.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200818222312.2181675-1-yhs@fb.com
Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.
This patch fixed the issue by seting the next
tid as pid_nr_ns(pid, ns) + 1, similar to
funciton next_tgid().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/bpf/20200818222310.2181500-1-yhs@fb.com
In our production system, we observed rcu stalls when
'bpftool prog` is running.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
\x09(t=21031 jiffies g=2534773 q=179750)
NMI backtrace for cpu 7
CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G W 5.8.0-00004-g68bfc7f8c1b4 #6
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
Call Trace:
<IRQ>
dump_stack+0x57/0x70
nmi_cpu_backtrace.cold+0x14/0x53
? lapic_can_unplug_cpu.cold+0x39/0x39
nmi_trigger_cpumask_backtrace+0xb7/0xc7
rcu_dump_cpu_stacks+0xa2/0xd0
rcu_sched_clock_irq.cold+0x1ff/0x3d9
? tick_nohz_handler+0x100/0x100
update_process_times+0x5b/0x90
tick_sched_timer+0x5e/0xf0
__hrtimer_run_queues+0x12a/0x2a0
hrtimer_interrupt+0x10e/0x280
__sysvec_apic_timer_interrupt+0x51/0xe0
asm_call_on_stack+0xf/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x6f/0x80
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:task_file_seq_get_next+0x71/0x220
Code: 00 00 8b 53 1c 49 8b 7d 00 89 d6 48 8b 47 20 44 8b 18 41 39 d3 76 75 48 8b 4f 20 8b 01 39 d0 76 61 41 89 d1 49 39 c1 48 19 c0 <48> 8b 49 08 21 d0 48 8d 04 c1 4c 8b 08 4d 85 c9 74 46 49 8b 41 38
RSP: 0018:ffffc90006223e10 EFLAGS: 00000297
RAX: ffffffffffffffff RBX: ffff888f0d172388 RCX: ffff888c8c07c1c0
RDX: 00000000000f017b RSI: 00000000000f017b RDI: ffff888c254702c0
RBP: ffffc90006223e68 R08: ffff888be2a1c140 R09: 00000000000f017b
R10: 0000000000000002 R11: 0000000000100000 R12: ffff888f23c24118
R13: ffffc90006223e60 R14: ffffffff828509a0 R15: 00000000ffffffff
task_file_seq_next+0x52/0xa0
bpf_seq_read+0xb9/0x320
vfs_read+0x9d/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8815f4f76e
Code: c0 e9 f6 fe ff ff 55 48 8d 3d 76 70 0a 00 48 89 e5 e8 36 06 02 00 66 0f 1f 44 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 52 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5
RSP: 002b:00007fff8f9df578 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000170b9c0 RCX: 00007f8815f4f76e
RDX: 0000000000001000 RSI: 00007fff8f9df5b0 RDI: 0000000000000007
RBP: 00007fff8f9e05f0 R08: 0000000000000049 R09: 0000000000000010
R10: 00007f881601fa40 R11: 0000000000000246 R12: 00007fff8f9e05a8
R13: 00007fff8f9e05a8 R14: 0000000001917f90 R15: 000000000000e22e
Note that `bpftool prog` actually calls a task_file bpf iterator
program to establish an association between prog/map/link/btf anon
files and processes.
In the case where the above rcu stall occured, we had a process
having 1587 tasks and each task having roughly 81305 files.
This implied 129 million bpf prog invocations. Unfortunwtely none of
these files are prog/map/link/btf files so bpf iterator/prog needs
to traverse all these files and not able to return to user space
since there are no seq_file buffer overflow.
This patch fixed the issue in bpf_seq_read() to limit the number
of visited objects. If the maximum number of visited objects is
reached, no more objects will be visited in the current syscall.
If there is nothing written in the seq_file buffer, -EAGAIN will
return to the user so user can try again.
The maximum number of visited objects is set at 1 million.
In our Intel Xeon D-2191 2.3GHZ 18-core server, bpf_seq_read()
visiting 1 million files takes around 0.18 seconds.
We did not use cond_resched() since for some iterators, e.g.,
netlink iterator, where rcu read_lock critical section spans between
consecutive seq_ops->next(), which makes impossible to do cond_resched()
in the key while loop of function bpf_seq_read().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200818222309.2181348-1-yhs@fb.com
The Kconfig help text contains the phrase "the the" in the help
text. Fix this and reformat the block of help text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Kconfig help text contains the phrase "the the" in the help
text. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim Mikityanskiy says:
====================
ethtool-netlink bug fixes
This series contains a few bug fixes for ethtool-netlink. These bugs are
specific for the netlink interface, and the legacy ioctl interface is
not affected. These patches aim to have the same behavior in
ethtool-netlink as in the legacy ethtool.
Please also see the sibling series for the userspace tool.
v2 changes: Added Fixes tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The legacy ethtool userspace tool shows an error when no features could
be changed. It's useful to have a netlink reply to be able to show this
error when __netdev_update_features wasn't called, for example:
1. ethtool -k eth0
large-receive-offload: off
2. ethtool -K eth0 rx-fcs on
3. ethtool -K eth0 lro on
Could not change any device features
rx-lro: off [requested on]
4. ethtool -K eth0 lro on
# The output should be the same, but without this patch the kernel
# doesn't send the reply, and ethtool is unable to detect the error.
This commit makes ethtool-netlink always return a reply when requested,
and it still avoids unnecessary calls to __netdev_update_features if the
wanted features haven't changed.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ethtool-netlink ignores dev->hw_features and may confuse the drivers by
asking them to enable features not in the hw_features bitmask. For
example:
1. ethtool -k eth0
tls-hw-tx-offload: off [fixed]
2. ethtool -K eth0 tls-hw-tx-offload on
tls-hw-tx-offload: on
3. ethtool -k eth0
tls-hw-tx-offload: on [fixed]
Fitler out dev->hw_features from req_wanted to fix it and to resemble
the legacy ethtool behavior.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Sankar