This is part of a series of patches which are introducing the
gfs2_rbm structure throughout the block allocation code. The
main aim of this part is to create a search function which can
deal directly with struct gfs2_rbm. In this case it specifies
the initial position at which to start the search and also the
point at which the search terminates.
The net result of this is to clean up the search code and make
it rather more readable, and the various possible exceptions which
may occur during the search are partitioned into their own functions.
There are some bug fixes too. We should not be checking the reservations
while allocating extents - the time for that is when we are searching
for where to put the extent, not when we've already made that decision.
Also, rgblk_search had two uses, and in only one of those cases did
it make sense to check for reservations. This is fixed in the new
gfs2_rbm_find function, which has a cleaner interface.
The reservation checking has been improved by always checking for
contiguous reservations, and returning the first free block after
all contiguous reservations. This is done under the spin lock to
ensure consistancy of the tree.
The allocation of extents is now in all cases done by the existing
allocation code, and if there is an active reservation, that is updated
after the fact. Again this is done under the spin lock, since it entails
changing the lookup key for the reservation in question.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch introduces a new structure, gfs2_rbm, which is a
tuple of a resource group, a bitmap within the resource group
and an offset within that bitmap. This is designed to make
manipulating these sets of variables easier. There is also a
new helper function which converts this representation back
to a disk block address.
In addition, the rbtree nodes which are used for the reservations
were not being correctly initialised, which is now fixed. Also,
the tracing was not passing through the inode where it should
have been. That is mostly fixed aside from one corner case. This
needs to be revisited since there can also be a NULL rgrp in
some cases which results in the device being incorrect in the
trace.
This is intended to be the first step towards cleaning up some
of the allocation code, and some further bug fixes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The rs_requested field is left over from the original allocation
code, however this should have been a parameter passed to the
various functions from gfs2_inplace_reserve() and not a member of the
reservation structure as the value is not required after the
initial allocation.
This also helps simplify the code since we no longer need to set
the rs_requested to zero. Also the gfs2_inplace_release()
function can also be simplified since the reservation structure
will always be defined when it is called, and the only remaining
task is to unlock the rgrp if required. It can also now be
called unconditionally too, resulting in a further simplification.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch reduces GFS2 file fragmentation by pre-reserving blocks. The
resulting improved on disk layout greatly speeds up operations in cases
which would have resulted in interlaced allocation of blocks previously.
A typical example of this is 10 parallel dd processes, each writing to a
file in a common dirctory.
The implementation uses an rbtree of reservations attached to each
resource group (and each inode).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Instead of reading in the resource groups when gfs2 is checking
for free space to allocate from, gfs2 can store the necessary infromation
in the resource group's lvb. Also, instead of searching for unlinked
inodes in every resource group that's checked for free space, gfs2 can
store the number of unlinked but inodes in the lvb, and only check for
unlinked inodes if it will find some.
The first time a resource group is locked, the lvb must initialized.
Since this involves counting the unlinked inodes in the resource group,
this takes a little extra time. But after that, if the resource group
is locked with GL_SKIP, the buffer head won't be read in unless it's
actually needed.
Enabling the resource groups lvbs is done via the rgrplvb mount option. If
this option isn't set, the lvbs will still be set and updated, but they won't
be verfied or used by the filesystem. To safely turn on this option, all of
the nodes mounting the filesystem must be running code with this patch, and
the filesystem must have been completely unmounted since they were updated.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moves the ancillary quota data structures into the
block reservations structure. This saves GFS2 some time and
effort in allocating and deallocating the qadata structure.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This set includes some minor fixes and improvements.
The one large patch addresses the special "nodir" mode,
which has been a long neglected proof of concept, but
with these fixes seems to be quite usable. It allows
the resource master to be assigned statically instead of
dynamically, which can improve performance if there is
little locality and most resources are shared.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mHOh
-----END PGP SIGNATURE-----
Merge tag 'dlm-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes some minor fixes and improvements. The one large
patch addresses the special "nodir" mode, which has been a long
neglected proof of concept, but with these fixes seems to be quite
usable. It allows the resource master to be assigned statically
instead of dynamically, which can improve performance if there is
little locality and most resources are shared."
* tag 'dlm-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: NULL dereference on failure in kmem_cache_create()
gfs2: fix recovery during unmount
dlm: fixes for nodir mode
dlm: improve error and debug messages
dlm: avoid unnecessary search in search_rsb
dlm: limit rcom debug messages
dlm: fix waiter recovery
dlm: prevent connections during shutdown
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used. This commit
fixes a number of problems, making nodir much more usable.
- Major change to recovery: recover all locks and restart
all in-progress operations after recovery. In some
cases it's not possible to know which in-progess locks
to recover, so recover all. (Most require recovery
in nodir mode anyway since rehashing changes most
master nodes.)
- Change the way nodir mode is enabled, from a command
line mount arg passed through gfs2, into a sysfs
file managed by dlm_controld, consistent with the
other config settings.
- Allow recovering MSTCPY locks on an rsb that has not
yet been turned into a master copy.
- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
from a previous, aborted recovery cycle. Base this
on the local recovery status not being in the state
where any nodes should be sending LOCK messages for the
current recovery cycle.
- Hold rsb lock around dlm_purge_mstcpy_locks() because it
may run concurrently with dlm_recover_master_copy().
- Maintain highbast on process-copy lkb's (in addition to
the master as is usual), because the lkb can switch
back and forth between being a master and being a
process copy as the master node changes in recovery.
- When recovering MSTCPY locks, flag rsb's that have
non-empty convert or waiting queues for granting
at the end of recovery. (Rename flag from LOCKS_PURGED
to RECOVER_GRANT and similar for the recovery function,
because it's not only resources with purged locks
that need grant a grant attempt.)
- Replace a couple of unnecessary assertion panics with
error messages.
Signed-off-by: David Teigland <teigland@redhat.com>
This patch eliminates the gfs2_log_element data structure and
rolls its two components into the gfs2_bufdata. This makes the code
easier to understand and makes it easier to migrate to a rbtree
to keep the list sorted.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch eliminates gfs2 superblock variable sd_log_le_rg which
is no longer used.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is another clean up in the logging code. This per-transaction
list was largely unused. Its main function was to ensure that the
number of buffers in a transaction was correct, however that counter
was only used to check the number of buffers in the bd_list_tr, plus
an assert at the end of each transaction. With the assert now changed
to use the calculated buffer counts, we can remove both bd_list_tr and
its associated counter.
This should make the code easier to understand as well as shrinking
a couple of structures.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Prior to this patch, we have two ways of sending i/o to the log.
One of those is used when we need to allocate both the data
to be written itself and also a buffer head to submit it. This
is done via sb_getblk and friends. This is used mostly for writing
log headers.
The other method is used when writing blocks which have some
in-place counterpart. This is the case for all the metadata
blocks which are journalled, and when journaled data is in use,
for unescaped journalled data blocks.
This patch replaces both of those two methods, and about half
a dozen separate i/o submission points with a single i/o
submission function. We also go direct to bio rather than
using buffer heads, since this allows us to build i/o
requests of the maximum size for the block device in
question. It also reduces the memory required for flushing
the log, which can be very useful in low memory situations.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Over time, we've slowly eliminated the use of sd_rindex_mutex.
Up to this point, it was only used in two places: function
gfs2_ri_total (which totals the file system size by reading
and parsing the rindex file) and function gfs2_rindex_update
which updates the rgrps in memory. Both of these functions have
the rindex glock to protect them, so the rindex is unnecessary.
Since gfs2_grow writes to the rindex via the meta_fs, the mutex
is in the wrong order according to the normal rules. This patch
eliminates the mutex entirely to avoid the problem.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If the first mounter fails to recover one of the journals
during mount, the mount should fail.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Previously, a spectator mount would not even attempt to do
journal recovery for a failed node. This meant that if all
mounted nodes were spectators, everyone would be stuck after
a node failed, all waiting for recovery to be performed.
This is unnecessary since the failed node had a clean journal.
Instead, allow a spectator mount to do a partial "read only"
recovery, which means it will check if the failed journal is
clean, and if so, report a successful recovery. If the failed
journal is not clean, it reports that journal recovery failed.
This makes it work the same as a read only mount on a read only
block device.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This new method of managing recovery is an alternative to
the previous approach of using the userland gfs_controld.
- use dlm slot numbers to assign journal id's
- use dlm recovery callbacks to initiate journal recovery
- use a dlm lock to determine the first node to mount fs
- use a dlm lock to track journals that need recovery
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch separates the code pertaining to allocations into two
parts: quota-related information and block reservations.
This patch also moves all the block reservation structure allocations to
function gfs2_inplace_reserve to simplify the code, and moves
the frees to function gfs2_inplace_release.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the vestigial variable al_alloced from
the gfs2_alloc structure. This is another baby step toward
multi-block reservations.
My next planned step is to decouple the quota variables
from the gfs2_alloc structure so we can use a different
method for allocations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.
If something does go wrong, then a stack trace is probably
more useful anyway.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time. It provides a slight
performance increase, and it dramatically simplifies the code.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.
The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:
Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.
Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.
Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.
Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a performance improvement for GFS2 in a clustered
environment. It makes the glock hold time self-adjusting.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a cache for the hash table to the directory code
in order to help simplify the way in which the hash table is
accessed. This is intended to be a first step towards introducing
some performance improvements in the directory code.
There are two follow ups that I'm hoping to see fairly shortly. One
is to simplify the hash table reading code now that we always read the
complete hash table, whether we want one entry or all of them. The
other is to introduce readahead on the heads of the hash chains
which are referred to from the table.
The hash table is a maximum of 128k in size, so it is not worth trying
to read it in small chunks.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.
This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.
There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Booher <dbooher@adams.net>
The VFS superblock structure now has a UUID field, so we can use that
in preference to the UUID field in the GFS2 superblock now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.
In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.
There is still more which can usefully be done in this area,
but this is a good start at least.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The GLF_LRU flag introduced in the previous patch can be
used to check if a glock is on the lru list when a new
holder is queued and if so remove it, without having first
to get the lru_lock.
The main purpose of this patch however is to optimise the
glocks left over when an inode at end of life is being
evicted. Previously such glocks were left with the GLF_LFLUSH
flag set, so that when reclaimed, each one required a log flush.
This patch resets the GLF_LFLUSH flag when there is nothing
left to flush thus preventing later log flushes as glocks are
reused or demoted.
In order to do this, we need to keep track of the number of
revokes which are outstanding, and also to clear the GLF_LFLUSH
bit after a log commit when only revokes have been processed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.
Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The log lock is currently used to protect the AIL lists and
the movements of buffers into and out of them. The lists
are self contained and no log specific items outside the
lists are accessed when starting or emptying the AIL lists.
Hence the operation of the AIL does not require the protection
of the log lock so split them out into a new AIL specific lock
to reduce the amount of traffic on the log lock. This will
also reduce the amount of serialisation that occurs when
the gfs2_logd pushes on the AIL to move it forward.
This reduces the impact of log pushing on sequential write
throughput.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Immediately after being synced to disk, cached quotas are zeroed out and a
subsequent access of the cached quotas results in incorrect zero values. This
meant that gfs2 assumed the actual usage to be the zero (or near-zero) usage
values it found in the cached quotas and comparison against warn/limits never
triggered a quota violation.
This patch adds a new flag QDF_REFRESH that is set after a sync so that the
cached quotas are forcefully refreshed from disk on a subsequent access on
seeing this flag set.
Resolves: rhbz#675944
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This has a number of advantages:
- Reduces contention on the hash table lock
- Makes the code smaller and simpler
- Should speed up glock dumps when under load
- Removes ref count changing in examine_bucket
- No longer need hash chain lock in glock_put() in common case
There are some further changes which this enables and which
we may do in the future. One is to look at using SLAB_RCU,
and another is to look at using a per-cpu counter for the
per-sb glock counter, since that is touched twice in the
lifetime of each glock (but only used at umount time).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can only merge the fields into a bitfield if the locking
rules for them are the same. In this case gl_spin covers all
of the fields (write side) but a couple of them are used
with GLF_LOCK as the read side lock, which should be ok
since we know that the field in question won't be changing
at the time.
The gl_req setting has to be done earlier (in glock.c) in order
to place it under gl_spin. The gl_reply setting also has to be
brought under gl_spin in order to comply with the new rules.
This saves 4*sizeof(unsigned int) per glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Recently a feature was added to GFS2 to allow journal id allocation
via sysfs. This patch builds upon that so that a negative journal id
will be treated as an error code to be passed back as the return code
from mount. This allows termination of the mount process if there is
a failure.
Also, the process has been updated so that the kernel will wait
for a journal id, even in the "spectator" case. This is required
in order to avoid mounting a filesystem in case there is an error
while joining the cluster. In the spectator case, 0 is written into
the file to indicate that all is well, and that mount should continue.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This option has never done anything useful. Also at the same time
this cleans up the sb checks which are done at mount time. The
debug option will be accepted, but ignored in future. Since it
didn't do anything, there didn't seem much point in retaining it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This option defaulted to on for lock_nolock mounts and off
otherwise. The only function was to avoid the revalidation of
dentries. In the cluster case, that is entirely pointless and
liable to cause coherency problems.
The patch changes the revalidation to depend upon whether the
fs is a local or cluster fs (i.e. it follows the existing default
behaviour). I very much doubt anybody ever used this option as
there is no reason to. Even so we will continue to accept it
on the mount command line, but ignore it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is been a no-op for a very long time now. I'm pretty sure
nobody uses it, but just in case we'll still accept it on the
command line, but ignore it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to the design of the VFS, it is quite usual for operations on GFS2
to consist of a lookup (requiring a shared lock) followed by an
operation requiring an exclusive lock. If a remote node has cached an
exclusive lock, then it will receive two demote events in rapid succession
firstly for a shared lock and then to unlocked. The existing min hold time
code was triggering in this case, even if the node was otherwise idle
since the state change time was being updated by the initial demote.
This patch introduces logic to skip the min hold timer in the case that
a "double demote" of this kind has occurred. The min hold timer will
still be used in all other cases.
A new glock flag is introduced which is used to keep track of whether
there have been any newly queued holders since the last glock state
change. The min hold time is only applied if the flag is set.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
This patch adds support for fallocate to gfs2. Since the gfs2 does not support
uninitialized data blocks, it must write out zeros to all the blocks. However,
since it does not need to lock any pages to read from, gfs2 can write out the
zero blocks much more efficiently. On a moderately full filesystem, fallocate
works around 5 times faster on average. The fallocate call also allows gfs2 to
add blocks to the file without changing the filesize, which will make it
possible for gfs2 to preallocate space for the rindex file, so that gfs2 can
grow a completely full filesystem.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
workqueue: mark init_workqueues() as early_initcall()
workqueue: explain for_each_*cwq_cpu() iterators
fscache: fix build on !CONFIG_SYSCTL
slow-work: kill it
gfs2: use workqueue instead of slow-work
drm: use workqueue instead of slow-work
cifs: use workqueue instead of slow-work
fscache: drop references to slow-work
fscache: convert operation to use workqueue instead of slow-work
fscache: convert object to use workqueue instead of slow-work
workqueue: fix how cpu number is stored in work->data
workqueue: fix mayday_mask handling on UP
workqueue: fix build problem on !CONFIG_SMP
workqueue: fix locking in retry path of maybe_create_worker()
async: use workqueue for worker pool
workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
workqueue: implement unbound workqueue
workqueue: prepare for WQ_UNBOUND implementation
libata: take advantage of cmwq and remove concurrency limitations
workqueue: fix worker management invocation without pending works
...
Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
This patch implements a wait for the journal id in the case that it has
not been specified on the command line. This is to allow the future
removal of the mount.gfs2 helper. The journal id would instead be
directly communicated by gfs_controld to the file system. Here is a
comparison of the two systems:
Current:
1. mount calls mount.gfs2
2. mount.gfs2 connects to gfs_controld to retrieve the journal id
3. mount.gfs2 adds the journal id to the mount command line and calls
the mount system call
4. gfs_controld receives the status of the mount request via a uevent
Proposed:
1. mount calls the mount system call (no mount.gfs2 helper)
2. gfs_controld receives a uevent for a gfs2 fs which it doesn't know
about already
3. gfs_controld assigns a journal id to it via sysfs
4. the mount system call then completes as normal (sending a uevent
according to status)
The advantage of the proposed system is that it is completely backward
compatible with the current system both at the kernel and at the
userland levels. The "first" parameter can also be set the same way,
with the restriction that it must be set before the journal id is
assigned.
In addition, if mount becomes stuck waiting for a reply from
gfs_controld which never arrives, then it is killable and will abort the
mount gracefully.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Workqueue can now handle high concurrency. Convert gfs to use
workqueue instead of slow-work.
* Steven pointed out that recovery path might be run from allocation
path and thus requires forward progress guarantee without memory
allocation. Create and use gfs_recovery_wq with rescuer. Please
note that forward progress wasn't guaranteed with slow-work.
* Updated to use non-reentrant workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch adds a message to indicate when barriers have been
disabled due to a block device which doesn't support them. You could
already tell this via the mount options in /proc/mounts, but all the
other filesystems also log a message at the same time.
Also, the same mechanisms are used to indicate when the lock
demote interface has been used (only ever used for debugging)
which is a request from our support team.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 tracks the number of revokes and unrevokes that are part of committed
transactions via sd_log_commited_revoke. It is possible for one process to add
revokes during its transaction, while another process unrevokes them during its
transaction. If the second process finishes its transaction first,
sd_log_commited_revoke will be decremented by the number of unrevokes that the
second process did, without first being incremented by the number of revokes
the first process did. This is fine, since all started transactions must be
completed before the journal can be flushed. However, sd_log_commited_revoke
is an unsigned integer, and log_refund() causes an assertion failure if it
would go negative at the end of a transaction. This patch makes
sd_log_commited_revoke a signed integer and allows it to go negative.
__gfs2_log_flush() still checks that it mataches the actual number of revokes.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As a consequence of the previous patch, we can now remove the
loop which used to be required due to the circular dependency
between the inodes and glocks. Instead we can just invalidate
the inodes, and then clear up any glocks which are left.
Also we no longer need the rwsem since there is no longer any
danger of the inode invalidation calling back into the glock
code (and from there back into the inode code).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.
The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).
This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.
This results in three major improvements:
1. A saving of approx 25% of memory used in caching inodes
2. A removal of the circular dependency between inodes and glocks
3. No confusion between "normal" and "metadata" inodes in super.c
Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a wait on umount between the point at which we
dispose of all glocks and the point at which we unmount the
lock protocol. This ensures that we've received all the replies
to our unlock requests before we stop the locking.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Currently gfs2 issues barrier unconditionally. There are various reasons
to disable them, be that just for testing or for stupid devices flushing
large battert backed caches. Add a nobarrier option that matches xfs and
btrfs for this. Also add a symmetric barrier option to turn it back on
at remount time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 now has three new mount options, statfs_quantum, quota_quantum and
statfs_percent. statfs_quantum and quota_quantum simply allow you to
set the tunables of the same name. Setting setting statfs_quantum to 0
will also turn on the statfs_slow tunable. statfs_percent accepts an
integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to
do any early sync when the local number of blocks free changes by at
least statfs_percent from the totoal number of blocks free. Setting
statfs_percent to 0 disables this.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The /sys/fs/gfs2/<fsname>/lock_module/id file has been unused for
some time now, so we can remove it. We still accept the mount option
though, as userspace still sends that.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The inum structure used throughout GFS2 has two fields. One
no_addr is the disk block number of the inode in question and
is used everywhere as the inode number. The other, no_formal_ino,
is used only as the generation number for NFS.
Historically the no_formal_ino field was set using a complicated
system of one global and one per-node file containing inode numbers
in order to ensure that each no_formal_ino was unique. Also this
code made no provision for what would happen when eventually the
(64 bit) numbers ran out. Now I know that is pretty unlikely to
happen given the large space of numbers, but it is possible
nevertheless.
The only guarantee required for no_formal_ino is that, for any
single inode, the same number doesn't get reused too quickly.
We already have a generation number which is kept in the inode
and initialised from a counter in the resource group (almost
no overhead, since we have to touch the resource group anyway
in order to allocate an inode in the first place). Aside from
ensuring that we never use the value 0 in the no_formal_ino
field, we can use that counter directly.
As a result of that change, we lose about 200 lines of code and
also gain about 10 creates/sec on the postmark benchmark (on
my test machine).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds "-o errors=panic" and "-o errors=withdraw" to the
gfs2 mount options. The "errors=withdraw" option is today's
current behaviour, meaning to withdraw from the file system if a
non-serious gfs2 error occurs. The new "errors=panic" option
tells gfs2 to force a kernel panic if a non-serious gfs2 file
system error occurs. This may be useful, for example, where
fabric-level fencing is used that has no way to reboot (such as
fence_scsi).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When a file is deleted from a gfs2 filesystem on one node, a dcache
entry for it may still exist on other nodes in the cluster. If this
happens, gfs2 will be unable to free this file on disk. Because of this,
it's possible to have a gfs2 filesystem with no files on it and no free
space. With this patch, when a node receives a callback notifying it
that the file is being deleted on another node, it schedules a new
workqueue thread to remove the file's dcache entry.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch increases the frequency with which gfs2 looks
for unlinked, but still allocated inodes. Its the equivalent
operation to ext3's orphan list, but done with bitmaps in
the resource groups.
This also fixes a bug where a field in the rgrp was too small.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
During block allocation, it is useful to know if sections of disk
are full on a finer grained basis than a single resource group.
This can make a performance difference when resource groups have
larger numbers of bitmap blocks, since we no longer have to search
them all block by block in each individual bitmap.
The full flag is set on a per-bitmap basis when it has been
searched and found to have no free space. It is then skipped in
subsequent searches until the flag is reset. The resetting
occurs if we have to drop the glock on the resource group for any
reason, or if we deallocate some blocks within that resource
group and thus free up some space.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch improves the error handling in the case where we
discover that the summary information in the resource group
doesn't match the bitmap information while in the process of
allocating blocks. Originally this resulted in a kernel bug,
but this patch changes that so that we return -EIO and print
some messages explaining what went wrong, and how to fix it.
We also remember locally not to try and allocate from the
same rgrp again, so that a subsequent allocation in a
different rgrp should succeed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a race condition where we can receive recovery
requests part way through processing a umount. This was causing
problems since the recovery thread had already gone away.
Looking in more detail at the recovery code, it was really trying
to implement a slight variation on a work queue, and that happens to
align nicely with the recently introduced slow-work subsystem. As a
result I've updated the code to use slow-work, rather than its own home
grown variety of work queue.
When using the wait_on_bit() function, I noticed that the wait function
that was supplied as an argument was appearing in the WCHAN field, so
I've updated the function names in order to produce more meaningful
output.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It has always been possible to adjust the gfs2 log commit
interval, but only from the sysfs interface. This adds a
mount option, commit=<nn>, which will be familar to ext3
users.
The sysfs interface continues to be available as well, although
this might be removed in the future.
Also this patch cleans up some duplicated structures in the GFS2
sysfs code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
After calling out to the dlm, GFS2 sets the new state of a glock to
gl_target in gdlm_ast(). However, gl_target is not always the lock
state that was requested. If a conversion from shared to exclusive
fails, finish_xmote() will call do_xmote() with LM_ST_UNLOCKED, instead
of gl->gl_target, so that it can reacquire the lock in exlusive the next
time around. In this case, setting the lock to gl_target in gdlm_ast()
will make GFS2 think that it has the glock in exclusive mode, when
really, it doesn't have the glock locked at all. This patch adds a new
field to the gfs2_glock structure, gl_req, to track the mode that was
requested.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we have a UUID, we ought to expose it to the user via sysfs
and uevents. We already have the fs name in both of these places
(a combination of the lock proto and lock table name) so if we add
the UUID as well, we have a full set.
For older filesystems (i.e. those created before mkfs.gfs2 was writing
UUIDs by default) the sysfs file will appear zero length, and no UUID
env var will be added to the uevents.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allows GFS2 to generate discard requests for blocks which are
no longer useful to the filesystem (i.e. those which have been freed as
the result of an unlink operation). The requests are generated at the
time which those blocks become available for reuse in the filesystem.
In order to use this new feature, you have to specify the "discard"
mount option. The code coalesces adjacent blocks into a single extent
when generating the discard requests, thus generating the minimum
number.
If an error occurs when the request has been sent to the block device,
then it will print a message and turn off the requests for that
filesystem. If the problem is temporary, then you can use remount to
turn the option back on again. There is also a nodiscard mount option
so that you can use remount to turn discard requests off, if required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The time stamp field is unused in the glock now that we are
using a shrinker, so that we can remove it and save sizeof(unsigned long)
bytes in each glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
o Reducing overhead by eliminating duplicated fields between structures
o Simplifcation of the code (reduces the code size by a fair bit)
o The locking interface is now the DLM interface itself as proposed
some time ago.
o Fewer lookups of glocks when processing replies from the DLM
o Fewer memory allocations/deallocations for each glock
o Scope to do further optimisations in the future (but this patch is
more than big enough for now!)
Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.
This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We only really need a single spin lock for the quota data, so
lets just use the lru lock for now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Deallocation of gfs2_quota_data objects now happens on-demand through a
shrinker instead of routinely deallocating through the quotad daemon.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the two daemons, gfs2_scand and gfs2_glockd
and replaces them with a shrinker which is called from the VM.
The net result is that GFS2 responds better when there is memory
pressure, since it shrinks the glock cache at the same rate
as the VFS shrinks the dcache and icache. There are no longer
any time based criteria for shrinking glocks, they are kept
until such time as the VM asks for more memory and then we
demote just as many glocks as required.
There are potential future changes to this code, including the
possibility of sorting the glocks which are to be written back
into inode number order, to get a better I/O ordering. It would
be very useful to have an elevator based workqueue implementation
for this, as that would automatically deal with the read I/O cases
at the same time.
This patch is my answer to Andrew Morton's remark, made during
the initial review of GFS2, asking why GFS2 needs so many kernel
threads, the answer being that it doesn't :-) This patch is a
net loss of about 200 lines of code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Following on from the recent clean up of gfs2_quotad, this patch moves
the processing of "truncate in progress" inodes from the glock workqueue
into gfs2_quotad. This fixes a hang due to the "truncate in progress"
processing requiring glocks in order to complete.
It might seem odd to use gfs2_quotad for this particular item, but
we have to use a pre-existing thread since creating a thread implies
a GFP_KERNEL memory allocation which is not allowed from the glock
workqueue context. Of the existing threads, gfs2_logd and gfs2_recoverd
may deadlock if used for this operation. gfs2_scand and gfs2_glockd are
both scheduled for removal at some (hopefully not too distant) future
point. That leaves only gfs2_quotad whose workload is generally fairly
light and is easily adapted for this extra task.
Also, as a result of this change, it opens the way for a future patch to
make the reading of the inode's information asynchronous with respect to
the glock workqueue, which is another improvement that has been on the list
for some time now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a clean up of gfs2_quotad prior to giving it an
extra job to do in addition to the current portfolio of updating
the quota and statfs information from time to time.
As a result it has been moved into quota.c allowing one of the
functions it calls to be made static. Also the clean up allows
the two existing functions to have separate timeouts and also
to coexist with its future role of dealing with the "truncate in
progress" inode flag.
The (pointless) setting of gfs2_quotad_secs is removed since we
arrange to only wake up quotad when one of the two timers expires.
In addition the struct gfs2_quota_data is moved into a slab cache,
mainly for easier debugging. It should also be possible to use
a shrinker in the future, rather than the current scheme of scanning
the quota data entries from time to time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moves the final field so that we can get rid
of struct gfs2_rgrpd_host, as promised some time ago. Also
by rearranging the fields slightly, we are able to reduce
the size of the gfs2_rgrpd structure at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves one of the fields of struct gfs2_rgrpd_host into
the struct gfs2_rgrpd with the eventual aim of removing
the struct rgrpd_host completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The final field in gfs2_dinode_host was the i_flags field. Thats
renamed to i_diskflags in order to avoid confusion with the existing
inode flags, and moved into the inode proper at a suitable location
to avoid creating a "hole".
At that point struct gfs2_dinode_host is no longer needed and as
promised (quite some time ago!) it can now be removed completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the directory entry count into the proper inode.
Potentially we could get this to share the space used by
something else in the future, but this is one more step
on the way to removing the gfs2_dinode_host structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the generation number from the gfs2_dinode_host
into the gfs2_inode structure. Eventually the plan is to get
rid of the gfs2_dinode_host structure completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds barrier support to GFS2. There is not a lot of change
really... we just add the barrier flag when we write journal header
blocks. If the underlying device refuses to support them, we fall back
to the previous way of doing things (wait for the I/O and hope) since
there is nothing else we can do. There is no user configuration,
barriers will always be on unless the device refuses to support them.
This seems a reasonable solution to me since this is a correctness
issue.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Until now, we've used the same scheme as GFS1 for atime. This has failed
since atime is a per vfsmnt flag, not a per fs flag and as such the
"noatime" flag was not getting passed down to the filesystems. This
patch removes all the "special casing" around atime updates and we
simply use the VFS's atime code.
The net result is that GFS2 will now support all the same atime related
mount options of any other filesystem on a per-vfsmnt basis. We do lose
the "lazy atime" updates, but we gain "relatime". We could add lazy
atime to the VFS at a later date, if there is a requirement for that
variant still - I suspect relatime will be enough.
Also we lose about 100 lines of code after this patch has been applied,
and I have a suspicion that it will speed things up a bit, even when
atime is "on". So it seems like a nice clean up as well.
From a user perspective, everything stays the same except the loss of
the per-fs atime quantum tweekable (ought to be per-vfsmnt at the very
least, and to be honest I don't think anybody ever used it) and that a
number of options which were ignored before now work correctly.
Please let me know if you've got any comments. I'm pushing this out
early so that you can all see what my plans are.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch shrinks the gfs2_args structure which is embedded in
every GFS2 superblock. It cuts down the size of the options to a single
unsigned int (the 13 bits of bitfields will be rounded up to that size
by the compiler) from the current 11 unsigned ints. So on x86 thats 44
bytes shrinking to 4 bytes, in each and every GFS2 superblock.
Signed-off-by: Steven Whitehouse <swhitho@redhat.com>
This patch is intended to fix the issues reported in bz #457798. Instead
of having the metafs as a separate filesystem, it becomes a second root
of gfs2. As a result it will appear as type gfs2 in /proc/mounts, but it
is still possible (for backwards compatibility purposes) to mount it as
type gfs2meta. A new mount flag "meta" is introduced so that its possible
to tell the two cases apart in /proc/mounts.
As a result it becomes possible to mount type gfs2 with -o meta and
get the same result as mounting type gfs2meta. So it is possible to
mount just the metafs on its own. Currently if you do this, its then
impossible to mount the "normal" root of the gfs2 filesystem without
first unmounting the metafs root. I'm not sure if thats a feature or
a bug :-)
Either way, this is a great improvement on the previous scheme and I've
verified that it works ok with bind mounts on both the "normal" root
and the metafs root in various combinations.
There were also a bunch of functions in super.c which didn't belong there,
so this moves them into ops_fstype.c where they can be static. Hopefully
the mount/umount sequence is now more obvious as a result.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
The ability to mark files for direct i/o access when opened
normally is both unused and pointless, so this patch removes
support for that feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the "recent list" which is used during allocation
and replaces it with the (already existing) mru list used during
deletion. The "recent list" was not a true mru list leading to a number
of inefficiencies including a "next" function which made scanning the
list an order N^2 operation wrt to the number of list elements.
This should increase allocation performance with large numbers of rgrps.
Its also a useful preparation and cleanup before some further changes
which are planned in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch implements a number of cleanups to the core of the
GFS2 glock code. As a result a lot of code is removed. It looks
like a really big change, but actually a large part of this patch
is either removing or moving existing code.
There are some new bits too though, such as the new run_queue()
function which is considerably streamlined. Highlights of this
patch include:
o Fixes a cluster coherency bug during SH -> EX lock conversions
o Removes the "glmutex" code in favour of a single bit lock
o Removes the ->go_xmote_bh() for inodes since it was duplicating
->go_lock()
o We now only use the ->lm_lock() function for both locks and
unlocks (i.e. unlock is a lock with target mode LM_ST_UNLOCKED)
o The fast path is considerably shortly, giving performance gains
especially with lock_nolock
o The glock_workqueue is now used for all the callbacks from the DLM
which allows us to simplify the lock_dlm module (see following patch)
o The way is now open to make further changes such as eliminating the two
threads (gfs2_glockd and gfs2_scand) in favour of a more efficient
scheme.
This patch has undergone extensive testing with various test suites
so it should be pretty stable by now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
This patch fixes a GFS2 filesystem consistency error reported from
function do_strip. The problem was caused by a timing window
that allowed two vfs inodes to be created in memory that point
to the same file. The problem is fixed by making the vfs's
iget_test, iget_set mechanism check and set a new bit in the
in-core gfs2_inode structure while the vfs inode spin_lock is held.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 wasn't invalidating its cache before it called into the lock manager
with a request that could potentially drop a lock. This was leaving a
window where the lock could be actually be held by another node, but the
file's page cache would still appear valid, causing coherency problems.
This patch moves the cache invalidation to before the lock manager call
when dropping a lock. It also adds the option to the lock_dlm lock
manager to not use conversion mode deadlock avoidance, which, on a
conversion from shared to exclusive, could internally drop the lock, and
then reacquire in. GFS2 now asks lock_dlm to not do this. Instead, GFS2
manually drops the lock and reacquires it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The blocks counter is almost a duplicate of the i_blocks
field in the VFS inode. The only difference is that i_blocks
can be only 32bits long for 32bit arch without large single file
support. Since GFS2 doesn't handle the non-large single file
case (for 32 bit anyway) this adds a new config dependency on
64BIT || LSF. This has always been the case, however we've never
explicitly said so before.
Even if we do add support for the non-LSF case, we will still
not require this field to be duplicated since we will not be
able to access oversized files anyway.
So the net result of all this is that we shave 8 bytes from a gfs2_inode
and get our config deps correct.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We don't need to keep track of when we last allocated data
and metadata separately since the only thing thats important
when searching for a free block is whether its free or not,
which is independent from what type of block it is.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There were three fields being used to keep track of the location
of the most recently allocated block for each inode. These have
been merged into a single field in order to better keep the
data and metadata for an inode close on disk, and also to reduce
the space required for storage.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is kind of trivial in the greater scheme of things, but
this removes three counters that AFAICT are never used.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch forms a pair with the previous patch which shrunk
di_height. Like that patch di_depth is renamed i_depth and moved
into struct gfs2_inode directly. Also the field goes from 16 bits
to 8 bits since it is also limited to a max value which is rather
small (17 in this case). In addition we also now validate the field
against this maximum value when its read in.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch further reduces GFS2's memory requirements by
eliminating the 64-bit version number fields in lieu of
a couple bits.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The functions in lm.c were just wrappers which were mostly
only used in one other file. By moving the functions to
the files where they are being used, they can be marked
static and also this will usually result in them being inlined
since they are often only used from one point in the code.
A couple of really trivial functions have been inlined by hand
into the function which called them as it makes the code clearer
to do that.
We also gain from one fewer function call in the glock lock and
unlock paths.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch further reduces the memory needs of GFS2 by
eliminating the gl_req_bh variable from struct gfs2_glock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch reduces memory by replacing the int variable
gl_waiters2 by a single bit in the gl_flags.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse