Commit Graph

19 Commits

Author SHA1 Message Date
Kuninori Morimoto 482982062f usb: gadget: renesas_usbhs: bugfix: don't modify platform data
renesas_usbhs has default callback functions and settings.
And it tried overwrite to platform private data
if platform doesn't have them.
So, if renesas_usbhs was compiled as module,
it will be hung-up on 2nd insmod.
This patch fixup it.
Special thanks to Bastian

Reported-by: Bastian Hecht <hechtb@googlemail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:53 +03:00
Kuninori Morimoto eb05191f6a usb: gadget: renesas_usbhs: add usbhs_set_device_speed() support for host
mod_host needs device speed setup function

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:49 +03:00
Kuninori Morimoto a9be4a4562 usb: gadget: renesas_usbhs: make sure SOF packet sending-out control
It is enabled to set SOF packet output bit when USBRST bit was set.
And USBRST bit should be set 0 when SOF packet was output.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:48 +03:00
Kuninori Morimoto f427eb64f4 usb: gadget: renesas_usbhs: support otg pin control
some renesas_usbhs device is supporting OTG external device interface.
In that device, it is necessary to control PWEN/EXTLP on DVSTCTR.
This patch support it.
But renesas_usbhs driver doesn't have OTG support for now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:47 +03:00
Kuninori Morimoto ef8bedb904 usb: gadget: renesas_usbhs: move usbhs_usbreq_get/set_val() to common.c
usbhs_usbreq_get/set_val() functions were in pipe.c file,
but it is irrelevant to pipe.
this patch move it to common.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:40 +03:00
Kuninori Morimoto 75587f52c7 usb: gadget: renesas_usbhs: add usbhs_bus_get_speed()
current mod_gadget had got usb speed on
usbhsg_irq_dev_state() which is status change interrupt callback function.
And the usb speed data was included in its parameter.

But this style works for mod_gadget,
but doesn't work for mod_host which
isn't interrupted when device status was changed.

This patch add usbhs_bus_get_speed() to solve this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:38 +03:00
Kuninori Morimoto 258485d990 usb: gadget: renesas_usbhs: add bus control functions
this patch add DVSTCTR control function for HOST support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:38 +03:00
Kuninori Morimoto 11935de557 usb: gadget: renesas_usbhs: change usbhsc_bus_ctrl() to usbsc_set_buswait()
renesas_usbhs will have register DVSTCTR control function for HOST support.
This patch changes usbhsc_bus_ctrl() to usbsc_set_buswait(),
to remove DVSTCTR access from it,

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:37 +03:00
Kuninori Morimoto ca8a282a53 usb: gadget: renesas_usbhs: add suspend/resume support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:40:00 +03:00
Kuninori Morimoto 233f519d27 usb: renesas_usbhs: fixup comment-out
This patch add/modify comment-out of renesas_usbhs.
On this process, usbhs_pkt_init was moved because it was placed under
usbhsf_null_handler which has no relationship it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08 14:57:12 -07:00
Kuninori Morimoto e73a9891b3 usb: renesas_usbhs: add DMAEngine support
USB DMA was installed on "normal DMAC" when SH7724 or older SuperH,
but the "USB-DMAC" was prepared on recent SuperH.
These 2 DMAC have a little bit different behavior.

This patch add DMAEngine code for "normal DMAC",
but it is still using PIO fifo.
The DMA fifo will be formally supported in the future.

You can enable DMA fifo by local fixup
usbhs_fifo_pio_push_handler -> usbhs_fifo_dma_push_handler
usbhs_fifo_pio_pop_handler  -> usbhs_fifo_dma_pop_handler
on usbhsg_ep_enable.

This DMAEngine was tested by g_file_storage on SH7724 Ecovec board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:10 -07:00
Kuninori Morimoto d3af90a5e4 usb: renesas_usbhs: add usbhsf_fifo
renesas_usbhs has CFIFO/D0FIFO/D1FIFO.
But current renesas_usbhs is using CFIFO (for PIO) only for now.
The fifo selection method is needed for DMAEngine support.
This is a preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:09 -07:00
Kuninori Morimoto 97f93227e6 usb: renesas_usbhs: fixup error processing on probe/remove
The error processing order was wrong.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-11 15:17:02 -07:00
Kuninori Morimoto b002ff6e26 usb: renesas_usbhs: add autonomy mode
Current renesas_usbhs was designed to save power when USB is not connected.
And it assumed platform uses callback to notify connection/disconnection
by external interrupt.

But some SuperH / platform board doesn't have such feature.

This patch adds autonomy mode which detect USB connection/disconnection
by internal interrupt.
But power will be always ON when autonomy mode is selected.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:35 -07:00
Kuninori Morimoto bc57381e63 usb: renesas_usbhs: use delayed_work instead of work_struct
This delay is used to overjump debounce.

And, this patch also move usbhsc_drvcllbck_notify_hotplug to global,
because it will be called from other files.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:34 -07:00
Kuninori Morimoto 6e267da8f1 usb: renesas_usbhs: add power control function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:34 -07:00
Kuninori Morimoto 206dcc2cfe usb: renesas_usbhs: move pdev_to_priv to global
usbhs_pdev_to_priv function will be used in other files.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:33 -07:00
Kuninori Morimoto af32fe5113 usb: renesas_usbhs: remove callback when module removed.
The callback function which is called from platform must be removed
if module removed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:32 -07:00
Kuninori Morimoto f1407d5c66 usb: renesas_usbhs: Add Renesas USBHS common code
Renesas SuperH has USBHS IP which can switch Host / Function.
This driver is designed so that Host / Function may dynamically change.
This patch add usb/renesas_usbhs and common code for SuperH USBHS.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13 16:07:07 -07:00