This change attempts to abort gating of clocks if a request to turn-on
clocks is pending. This would in turn avoid turning OFF and back ON the
clocks.
Link: https://lore.kernel.org/r/1573798172-20534-7-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return IRQ_HANDLED only if the irq is really handled, this will help in
catching spurious interrupts that go unhandled.
Link: https://lore.kernel.org/r/1573798172-20534-6-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_print_host_regs() can be called by interrupt handler, but it may
sleep due to ufshcd_dump_regs() allocates the dump buffer memory with flag
GFP_KERNEL. Fix it by changing GFP_KERNEL to GFP_ATMOIC.
Link: https://lore.kernel.org/r/1573798172-20534-5-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix up possible unclocked register access to auto hibern8 register in
resume path and through sysfs entry. Meanwhile, enable auto hibern8 only
after device is fully initialized in probe path.
Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add reset control for host controller so that host controller can be reset
as required in its power up sequence.
Link: https://lore.kernel.org/r/1573798172-20534-3-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to recover from hibern8 exit failure, perform a reset in link
recovery path before issuing link start-up.
Link: https://lore.kernel.org/r/1573798172-20534-2-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove SG_NONE and a related misleading comment. Update documentation.
This patch does not affect behaviour as zero initialization is redundant.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: usb-storage@lists.one-eyed-alien.net
Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For some reason this driver depends on !64BIT, but it can still be useful
to allow compile-testing on 64-bit machines.
Link: https://lore.kernel.org/r/20191105085609.2338-3-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MODULE_LICENSE macro is unconditionally defined in module.h, no need to
ifdef its use.
Link: https://lore.kernel.org/r/20191105085609.2338-2-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
platform_get_irq() will call dev_err() itself on failure, so there is no
need for the driver to also do this. This is detected by coccinelle.
Link: https://lore.kernel.org/r/20191101140058.23212-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When using this driver on a Blizzard 1260, there were failures whenever DMA
transfers from the SCSI bus to memory of 65535 bytes were followed by a DMA
transfer of 1 byte. This caused the byte at offset 65535 to be overwritten
with 0xff. The Blizzard hardware can't handle single byte DMA transfers.
Besides this issue, limiting the DMA length to something that is not a
multiple of the page size is very inefficient on most file systems.
It seems this limit was chosen because the DMA transfer counter of the ESP
by default is 16 bits wide, thus limiting the length to 65535 bytes.
However, the value 0 means 65536 bytes, which is handled by the ESP and the
Blizzard just fine. It is also the default maximum used by esp_scsi when
drivers don't provide their own dma_length_limit() function.
The limit of 65536 bytes can be used by all boards except the Fastlane. The
old driver used a limit of 65532 bytes (0xfffc), which is reintroduced in
this patch.
Fixes: b7ded0e8b0 ("scsi: zorro_esp: Limit DMA transfers to 65535 bytes")
Link: https://lore.kernel.org/r/20191112175523.23145-1-jongk@linux-m68k.org
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/csiostor/csio_lnode.c: In function 'csio_ln_init':
drivers/scsi/csiostor/csio_lnode.c:1995:21: warning:
variable 'rln' set but not used [-Wunused-but-set-variable]
It is never used since introduction, so remove it.
Link: https://lore.kernel.org/r/20191029061530.98197-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:
Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
ESR = 0x96000047
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000047
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
Internal error: Oops: 96000047 [#2] PREEMPT SMP
...
Call trace:
__memcpy+0x74/0x180
ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
ufs_bsg_request+0x178/0x3b0
bsg_queue_rq+0xc0/0x118
blk_mq_dispatch_rq_list+0xb0/0x538
blk_mq_sched_dispatch_requests+0x18c/0x1d8
__blk_mq_run_hw_queue+0xb4/0x118
blk_mq_run_work_fn+0x28/0x38
process_one_work+0x1ec/0x470
worker_thread+0x48/0x458
kthread+0x130/0x138
ret_from_fork+0x10/0x1c
Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
---[ end trace 793e1eb5dff69f2d ]---
note: kworker/0:2H[2054] exited with preempt_count 1
This patch is to move "descriptor = NULL" down to below the label
"out_unlock".
Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print out returned response size and buffer size, while the front one is
bigger than the back one.
Link: https://lore.kernel.org/r/20191112223436.27449-2-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently we call function hisi_sas_debugfs_exit() to remove debugfs_dir
before freeing interrupt irqs and destroying workqueue in the driver remove
path.
If a dump is triggered before function hisi_sas_debugfs_exit() but
debugfs_work may be called after it, so it may refer to already removed
debugfs_dir which will cause NULL pointer dereference.
To avoid it, put function hisi_sas_debugfs_exit() after free_irqs and
destroy workqueue when removing hisi_sas driver.
Link: https://lore.kernel.org/r/1573551059-107873-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Need to return directly if init hardware failed.
Fixes: 73a4925d15 ("scsi: hisi_sas: Update all the registers after suspend and resume")
Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.6.0.2
Link: https://lore.kernel.org/r/20191111230401.12958-7-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver is setting the initiator nvme template with a max hw queues value of
the present cpu count which is odd. It should be registering the number of
hdwq queues (queues created on the adapter).
Change to set nvme tempate, in all cases, to the number of hardware queues.
Link: https://lore.kernel.org/r/20191111230401.12958-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, cpu_map[cpu#]->hdwq is left to equal LPFC_VECTOR_MAP_EMPTY for
not present CPUs. If a CPU is dynamically hot-added, it is possible we may
crash due to not assigning an allocated hdwq.
Correct by assigning a hdwq at initialization for all not-present CPUs.
Fixes: dcaa213679 ("scsi: lpfc: Change default IRQ model on AMD architectures")
Link: https://lore.kernel.org/r/20191111230401.12958-5-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Compilation can fail due to having an inline function reference where the
function body is not present.
Fix by removing the inline tag.
Fixes: 93a4d6f401 ("scsi: lpfc: Add registration for CPU Offline/Online events")
Link: https://lore.kernel.org/r/20191111230401.12958-4-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Coverity reported the following:
*** CID 101747: Null pointer dereferences (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433 kfree(mp);
4434 }
4435 mempool_free(mbox, phba->mbox_mem_pool);
4436 }
4437 out:
4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv CID 101747: Null pointer dereferences (FORWARD_NULL)
vvv Dereferencing null pointer "shost".
4439 spin_lock_irq(shost->host_lock);
4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441 spin_unlock_irq(shost->host_lock);
4442
4443 /* If the node is not being used by another discovery thread,
4444 * and we are sending a reject, we are done with it.
Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e0 ("[SCSI] lpfc: NPIV: split ports")
CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
TI's J721e SoC has a Cadence UFS IP with a TI specific wrapper. This is a
minimal driver to configure the wrapper. It releases the UFS slave device
out of reset and sets up registers to indicate PHY reference clock input
frequency before probing child Cadence UFS driver.
Link: https://lore.kernel.org/r/20191108164857.11466-3-vigneshr@ti.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add binding documentation of TI wrapper for Cadence UFS Controller.
Link: https://lore.kernel.org/r/20191108164857.11466-2-vigneshr@ti.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent recursion into the IO path under low memory conditions by using
GFP_NOIO in place of GFP_KERNEL when allocating a new command with
tcmu_alloc_cmd() and user ring space with tcmu_get_empty_block().
Link: https://lore.kernel.org/r/20191108082901.417950-1-damien.lemoal@wdc.com
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct scsi_cmnd cmd->req.resid_len which is returned and set respectively
by the helper functions scsi_get_resid() and scsi_set_resid() is an
unsigned int. Reflect this fact in the interface of these helper functions.
Also fix compilation errors due to min() and max() type mismatch introduced
by this change in scsi debug code, usb transport code and in the USB ENE
card reader driver.
Link: https://lore.kernel.org/r/20191030090847.25650-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel warning:
cpumask_of_node(-1): (unsigned)node >= nr_node_ids(1)
Fixes: dcaa213679 ("scsi: lpfc: Change default IRQ model on AMD architectures")
Link: https://lore.kernel.org/r/20191108225947.1395-1-jsmart2021@gmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel bug report:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/954
Fixes: d79c9e9d4b ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.")
Link: https://lore.kernel.org/r/20191107052158.25788-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid an uninitialized value (0) for ha->fc4_type_priority being falsely
interpreted as NVMe priority. Not strictly needed any more after the
previous patch, but makes the fc4_type_priority handling more explicit.
Link: https://lore.kernel.org/r/20191107224839.32417-3-martin.wilck@suse.com
Tested-by: David Bond <dbond@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ha->fc4_type_priority is currently initialized only in
qla81xx_nvram_config(). That makes it default to NVMe for other adapters.
Fix it.
Fixes: 84ed362ac4 ("scsi: qla2xxx: Dual FCP-NVMe target port support")
Link: https://lore.kernel.org/r/20191107224839.32417-2-martin.wilck@suse.com
Tested-by: David Bond <dbond@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the code in qla_init.c is initiator code, remove the SCSI target core
include directive.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Link: https://lore.kernel.org/r/20191106044226.5207-2-bvanassche@acm.org
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
P2P needs to take the alternate plogi route.
Link: https://lore.kernel.org/r/20191105150657.8092-8-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On heavy loads, a memory leak of the srb_t structure is observed. This
would make the qla2xxx_srbs cache gobble up memory.
Fixes: 219d27d714 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Cc: stable@vger.kernel.org # 5.2
Link: https://lore.kernel.org/r/20191105150657.8092-7-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code assumes abort will remove the original command from the active
list where scsi_done will not be called. Instead, the eh_abort thread will
do the scsi_done. That is not the case. Instead, we have a double
scsi_done calls triggering use after free.
Abort will tell FW to release the command from FW possesion. The original
command will return to ULP with error in its normal fashion via scsi_done.
eh_abort path would wait for the original command completion before
returning. eh_abort path will not perform the scsi_done call.
Fixes: 219d27d714 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Cc: stable@vger.kernel.org # 5.2
Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
when GPSC/GPDB switch command fails, driver just returns without doing a
proper cleanup. This patch fixes this memory leak by calling sp->free() in
the error path.
Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On switch, fabric and mgt command timeout, driver send Abort to tell FW to
return the original command. If abort is timeout, then return both Abort
and original command for cleanup.
Fixes: 219d27d714 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Cc: stable@vger.kernel.org # 5.2
Link: https://lore.kernel.org/r/20191105150657.8092-3-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code will send PRLI with FC-NVMe bit set for the targets which
support only FCP. This may result into issue with targets which do not
understand NVMe and will go into a strange state. This patch would restart
the login process by going back to PLOGI state. The PLOGI state will force
the target to respond to correct PRLI request.
Fixes: c76ae845ea ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: stable@vger.kernel.org # 5.4
Link: https://lore.kernel.org/r/20191105150657.8092-2-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document "qcom,sm8150-ufshc" compatible string for UFS HC found on SM8150.
Link: https://lore.kernel.org/r/20191024074802.26526-2-vkoul@kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch renames some variables in chap_server_compute_hash() to make it
harder to confuse the initiator's challenge with the target's challenge
when the mutual chap authentication is used.
Link: https://lore.kernel.org/r/20191017131037.9903-4-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch modifies the chap_server_compute_hash() function to make it
agnostic to the choice of hash algorithm that is used. It also adds
support to three new hash algorithms: SHA1, SHA256 and SHA3-256.
The chap_got_response() function has been removed because the digest type
validity is already checked by chap_server_open()
Link: https://lore.kernel.org/r/20191028123822.5864-2-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.
Fixes: bf81623542 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.6.0.1
Link: https://lore.kernel.org/r/20191105005708.7399-12-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Asutosh Das