Some old mice have a tendency to not accept the high resolution multiplier.
They reply with a -EPIPE which was previously ignored.
Force the call to resolution multiplier to be synchronous and actually
check for the answer. If this fails, consider the mouse like a normal one.
Fixes: 2dc702c991 ("HID: input: use the Resolution Multiplier for
high-resolution scrolling")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071
Reported-and-tested-by: James Feeney <james@nurealm.net>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
request_module() may not be called form async context and in some cases
hid devices may be added from an async context. One example of this
happening is under hyperv, where this was triggering a WARN_ON in
request_module():
[ 11.174497] hid_add_device+0xee/0x2b0 [hid]
[ 11.174499] mousevsc_probe+0x223/0x2eb [hid_hyperv]
[ 11.174501] vmbus_probe+0x3a/0x90
[ 11.174504] really_probe+0x229/0x420
[ 11.174506] driver_probe_device+0x115/0x130
[ 11.174507] __driver_attach_async_helper+0x87/0x90
[ 11.174509] async_run_entry_fn+0x37/0x150
This commit skips the request_module(), falling back to the old behavior
of letting userspace deal with this, in case we are called from an async
context.
Cc: Lili Deng <v-lide@microsoft.com>
Reported-by: Lili Deng <v-lide@microsoft.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Recent kernels allow the generic-hid driver to be used as fallback for
devices with a specialized driver, when the hiddev is not listed in
hid_have_special_driver. Over time we are removing more and more
devices from the hid_have_special_driver table as devices get tested
to support this setup.
Before this commit the following happens when a HID device which has a
special-driver and is no longer listed in hid_have_special_driver, gets
enumerated:
1) device_add() gets called
2) bus_add_device() looks for a matching already registered hid driver,
and bind hid-generic to the new device
3) kobject_uevent(&dev->kobj, KOBJ_ADD) gets called notifying userspace of
the new hid_dev. udev calls modprobe based on the modalias in the uevent
4) The special driver gets loaded by modprobe
5) __hid_bus_reprobe_drivers() unbinds hid-generic and binds the new driver
There are a couple of downsides to this:
a) The probing messages printend when a HID driver bounds show up twice in
dmesg, which is confusing for the user
b) The (un)binding typically causes one or more evdev device-nodes to get
(un)registered firing of udev events to which e.g. the xserver responds by
(un)registering xinput devices and reporting this to interested clients.
IOW the i. bind generic, ii. unbind generic, iii. bind special driver dance
sets in motion a whole chain of events each step, while we really only want
the events from step iii. to be reported to userspace.
This commits introduces a request_module call before the device_add()
call, so that the special-driver is loaded when step 2) looks for a
matching driver and we directly bind the specialized driver.
Note the request_module call translates to an execve("/sbin/modprobe", ...)
and we now do this for each HID device added. So this is not entirely free,
but adding HID devices is not something which happens 100s of times a
second, so this should be fine.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[bentiss: fixed typo in commit message found by checkpatch.pl]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
As seen on some USB wireless keyboards manufactured by Primax, the HID
parser was using some assumptions that are not always true. In this case
it's s the fact that, inside the scope of a main item, an Usage Page
will always precede an Usage.
The spec is not pretty clear as 6.2.2.7 states "Any usage that follows
is interpreted as a Usage ID and concatenated with the Usage Page".
While 6.2.2.8 states "When the parser encounters a main item it
concatenates the last declared Usage Page with a Usage to form a
complete usage value." Being somewhat contradictory it was decided to
match Window's implementation, which follows 6.2.2.8.
In summary, the patch moves the Usage Page concatenation from the local
item parsing function to the main item parsing function.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Terry Junge <terry.junge@poly.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Commit 71f6fa90a3 ("HID: increase maximum global item tag report size
to 256") increases the max report size from 128 to 256.
We also need to update the report size in hid_field_extract() otherwise
it complains and truncates now valid report size:
[ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1)
BugLink: https://bugs.launchpad.net/bugs/1818547
Fixes: 71f6fa90a3 ("HID: increase maximum global item tag report size to 256")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Manually tracking an active collection to set collection parents is not
necessary, we just have to look one step back into the collection stack
to find the correct parent.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Previously, the pointer to the parent collection was stored. If a device
exceeds 16 collections (HID_DEFAULT_NUM_COLLECTIONS), the array to store
the collections is reallocated, the pointer to the parent collection becomes
invalid.
Replace the pointers with an index-based lookup into the collections array.
Fixes: c53431eb69 ("HID: core: store the collections as a basic tree")
Reported-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Kyle Pelton <kyle.d.pelton@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Resolution Multiplier is a feature report that modifies the value of
Usages within the same Logical Collection. If the multiplier is set to
anything but 1, the hardware reports (value * multiplier) for the same amount
of physical movement, i.e. the value we receive in the kernel is
pre-multiplied.
The hardware may either send a single (value * multiplier), or by sending
multiplier as many reports with the same value, or a combination of these two
options. For example, when the Microsoft Sculpt Ergonomic mouse Resolution
Multiplier is set to 12, the Wheel sends out 12 for every detent but AC Pan
sends out a value of 3 at 4 times the frequency.
The effective multiplier is based on the physical min/max of the multiplier
field, a logical min/max of [0,1] with a physical min/max of [1,8] means the
multiplier is either 1 or 8.
The Resolution Multiplier was introduced for high-resolution scrolling in
Windows Vista and is commonly used on Microsoft mice.
The recommendation for the Resolution Multiplier is to default to 1 for
backwards compatibility. This patch adds an arbitrary upper limit at 255. The
only known use case for the Resolution Multiplier is for scroll wheels where the
multiplier has to be a fraction of 120 to work with Windows.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
For each collection parsed, store a pointer to the parent collection
(if any). This makes it a lot easier to look up which collection(s)
any given item is part of
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes and new features for driver core. Highlights:
- maximum global item tag report size gets increased to 256
- improved INPUT_PROP reporting for Digitizer devices
There is a NULL pointer dereference in case memory resources
for *parse* are not successfully allocated.
Fix this by adding a new goto label and make the execution
path jump to it in case vzalloc() fails.
Addresses-Coverity-ID: 1473081 ("Dereference after null check")
Fixes: b2dd9f2e5a ("HID: core: fix memory leak on probe")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The dynamically allocted collection stack does not get freed in
all situations. Make sure to also free the collection stack when
using the parser in hid_open_report().
Fixes: 08a8a7cf14 ("HID: core: do not upper bound the collection stack")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The maximum globale report size has changed from 32->...->96->128 in the past
years. With the development usage of HID, the report_size max value 128 cannot
satisfy all requirements.
There are applications need to expose intrinsic metadata to camera stabilizing
applications such as 3DFE application. 3DFE intrinsic is designed to express
environmental information about sensor that may dynamically change while the
sensor is running (such data include noise spectral density, bias standard
deviation)
A sensor data field is SENSOR_VALUE_PAIR that consists of a PROPERTYKEY and
PROPVARIANT pair. It need to report a unique PROPERTYKEY for each data field.
Take “Noise Spectral Density” as an example, it report count will be
defined as below:
"Size of Property key GUID(16 Byte) + property key index(4 Byte) +
size of Noise Spectral Density value(4 Byte)"
In this case, the data report max is totally 192(24Byte), which is larger than
128, while max size 128 blocked it as illegal length. So increase the report
size to satisfy it and more demands in the future.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function compare_device_paths from wacom_sys.c is generic
and useful for other drivers. Move the function to hid-core and
rename it as hid_compare_device_paths.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Looks like 4 was sufficient until now. However, the Surface Dial needs
a stack of 5 and simply fails at probing.
Dynamically add HID_COLLECTION_STACK_SIZE to the size of the stack if
we hit the upper bound.
Checkpatch complains about bare unsigned, so converting those to
'unsigned int' in struct hid_parser
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- spectrev1 pattern fix in hiddev from Gustavo A. R. Silva
- bounds check fix for hid-debug from Daniel Rosenberg
- regression fix for HID autobinding from Benjamin Tissoires
- removal of excessive logging from i2c-hid driver from Jason Andryuk
- fix specific to 2nd generation of Wacom Intuos devices from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hiddev: fix potential Spectre v1
HID: i2c-hid: Fix "incomplete report" noise
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
HID: debug: check length before copy_to_user()
HID: core: allow concurrent registration of drivers
Detected on the Dell XPS 9365.
The laptop has 2 devices that benefit from the hid-generic auto-unbinding.
When those 2 devices are presented to the userspace, udev loads both wacom and
hid-multitouch. When this happens, the code in __hid_bus_reprobe_drivers() is
called concurrently and the second device gets reprobed twice.
An other bug in the power_supply subsystem prevent to remove the wacom driver
if it just finished its initialization, which basically kills the wacom node.
[jkosina@suse.cz: reformat changelog a bit]
Fixes c17a7476e4 ("HID: core: rewrite the hid-generic automatic unbind")
Cc: stable@vger.kernel.org # v4.17
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- improvement of duplicate usage handling in hid-input from Benjamin Tissoires
- Win 8.1 precisioun touchpad spec implementation from Benjamin Tissoires
Fix comment typo for hid_hw_open().
[jkosina@suse.cz: write at least some changelog]
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is not a good idea to try to fit all types of applications in the
same input report. There are a lot of devices that are needing
the quirk HID_MULTI_INPUT but this quirk doesn't match the actual HID
description as it is based on the report ID.
Given that most devices with MULTI_INPUT I can think of split nicely
the devices inputs into application, it is a good thing to split the
devices by default based on this assumption.
Also make hid-multitouch following this rule, to not have to deal
with too many input created.
While we are at it, fix some checkpatch complaints about converting
'unsigned' to 'unsigned int'.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Given that now the quirk handling is done in hid-quirk.c, we can actually
reset the quirks before calling .probe(), so that the drivers do not need
to keep track of initial quirks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We actually can have the unbind/rebind logic in hid-core.c, leaving
only the match function in hid-generic.
This makes hid-generic simpler and the whole logic simpler too.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When size is negative, calling memset will make segment fault.
Declare the size as type u32 to keep memset safe.
size in struct hid_report is unsigned, fix return type of
hid_report_len to u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This series from Benjamin Tissoires finally removes one of the big PITAs
in the hid-core, which is the absolute need of having added all the new
device IDs into the horrid hid_have_special_driver[]
Given all the effort distros have done with splash-screens to give
users a nice clean boot experience, we really want dmesg --level=err
to not print anything unless there is a real problem with either the
hardware or the kernel. Buggy HID descriptors unfortunately happen
all too often, so lower the log level to warning keep the console
clear of error messages such as:
[ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Most HID devices behave properly when they are used with hid-generic.
Since kernel v4.12, we do not poll for input reports at plug in, so
hid-generic should behave properly with all HID devices.
There has been a long standing list of HID devices that have a special
driver. It used to be just a few, but with time, this list went too big,
and we can not ask users to know which HID special driver will pick up
their device.
We can teach hid-generic to be nice with others. If a device is not
explicitly marked with HID_QUIRK_HAVE_SPECIAL_DRIVER, we can allow
hid-generic to pick up the device as long as no other loaded HID driver
will match the device.
When the special driver appears, hid-generic can step back and let
the special driver handling the device. In case this special driver
is removed, this good old pal of hid-generic will rebind to the device.
This basically makes the list hid_have_special_driver[] useless. It
still allows to not see a hid-generic driver bound and removed during
boot, so we can keep it around.
This will also help other people to have a special HID driver without
the need of recompiling hid-core.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Better having all the devices quirks in one place.
Note that this change introduces an initial lookup for the device in
hid_gets_squirk(), which should not theoretically be required, but which
actually allows to not have to reparse the list of ignored devices
if we call hid_lookup_quirks twice.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is better to centralize the information of special devices in one
single file. Instead of manually parsing the list of devices that
have a special driver or those that need to be ignored, introduce
HID_QUIRK_HAVE_SPECIAL_DRIVER and set the correct quirks while fetching
those quirks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usbhid has a list of dynamic quirks in addition to a list of static quirks.
There is not much USB specific in that, so move this part of the module
in core so we can have one central place for quirks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
Signed-off-by: Viktor Chapliev <viktor-tch@yandex.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new U1 device Product ID This device is used on HP Elite book x360 series.
[jkosina@suse.cz: update changelog]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Define T4 device specification value for support T4 device.
- Creeate "t4_contact_data" and "t4_input_report" structure for decoding and
storing T4-specific data
- Create "t4_calc_check_sum()" function for calculating checksum value to send
to the device. T4 needs to send this value when reading or writing device
address value.
- Create "t4_read_write_register()" function for reading and writing device
address value.
- Create "t4_raw_event()" function for decodin XYZ, palm and button data.
- Replace "MAX_TOUCHES" fixed variable to "max_fingers" variable.
- Add T4 devuce product ID. (0x120C)
T4 device is used on HP EliteBook 1000 series and Zbook Stduio
[jkosina@suse.cz: rewrite changelog]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In addition to DEFT, Elecom introduced a larger trackball called HUGE, in
both wired (M-HT1URBK) and wireless (M-HT1DRBK) versions. It has the same
buttons and behavior as the DEFT. This patch adds the two relevant USB IDs
to enable operation of the three Fn buttons on the top of the device.
Cc: Diego Elio Petteno <flameeyes@flameeyes.eu>
Signed-off-by: Alex Manoussakis <amanou@gnu.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Fn keys on Asus ROG G752 laptop.
The report descriptor is broken so I fixed it.
Tested on an Asus G752VT.
Resent fix white space fixes
Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make this const as it is only passed as an argument to the function
device_create_file and device_remove_file and the corresponding arguments are
of type const. Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Arnd pointed out that driver_lock semaphore is superfluous, as
driver core already provides all the necessary concurency protection.
Removal patch from Binoy Jayan
The semaphore 'driver_lock' is used as a simple mutex, and also unnecessary as
suggested by Arnd. Hence removing it, as the concurrency between the probe and
remove is already handled in the driver core.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The iHome keypad also requires the same tweak we are doing for other
Ortek devices.
Reported-by: Mairin Duffy <duffy@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus Transformer T100CHI comes with a Bluetooth keyboard dock which
uses the same 0xff31 Asus vendor HUT page as other Asus keyboards.
This commit adds its device-id to hid-asus and fixes an issue in the
descriptor of the 0xff31 Usage, which together fixes the special keys
on this keyboard not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- open/close tracking improvements from Dmitry Torokhov
- battery support improvements in Wacom driver from Jason Gerecke
- Win8 support fixes from Benjamin Tissories and Hans de Geode
- misc fixes to Intel-ISH driver from Arnd Bergmann
- support for quite a few new devices and small assorted fixes here and
there
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits)
HID: intel-ish-hid: Enable Gemini Lake ish driver
HID: intel-ish-hid: Enable Cannon Lake ish driver
HID: wacom: fix mistake in printk
HID: multitouch: optimize the sticky fingers timer
HID: multitouch: fix rare Win 8 cases when the touch up event gets missing
HID: multitouch: use BIT macro
HID: Add driver for Retrode2 joypad adapter
HID: multitouch: Add support for Google Rose Touchpad
HID: multitouch: Support PTP Stick and Touchpad device
HID: core: don't use negative operands when shift
HID: apple: Use country code to detect ISO keyboards
HID: remove no longer used hid->open field
greybus: hid: remove custom locking from gb_hid_open/close
HID: usbhid: remove custom locking from usbhid_open/close
HID: i2c-hid: remove custom locking from i2c_hid_open/close
HID: serialize hid_hw_open and hid_hw_close
HID: usbhid: do not rely on hid->open when deciding to do IO
HID: hiddev: use hid_hw_power instead of usbhid_get/put_power
HID: hiddev: use hid_hw_open/close instead of usbhid_open/close
HID: asus: Add support for Zen AiO MD-5110 keyboard
...
Jiri Kosina