Dell Latitude 3160 does not have keyboard backlight, but there is a
sysfs interface for it, which does nothing at all.
KBD_LED_ON_TOKEN is the only token can be found. Since it doesn't have
KBD_LED_OFF_TOKEN or KBD_LED_AUTO_*_TOKEN, it should be safe to assume
at least two tokens should be present to support keyboard backlight.
Not all models have ON token - they may have multiple AUTO tokens instead.
Models which do not use SMBIOS token to control keyboard backlight, also
have this issue. Brightness level is 0 on these models. Verified on Dell
Inspiron 3565.
Reports keyboard backlight is supported only when at least two modes are
present.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When changing keyboard backlight state on new Dell laptops, firmware
expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops
fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed
leds dell::kbd_backlight: Setting an LED's brightness failed (-6)
This patch adds support for retrieving current timeout AC values and also
updating them. Current timeout value in sysfs is displayed based on current
AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by
checking existence of Keyboard Backlight with AC SMBIOS token (0x0451).
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Arcadiy Ivanov <arcadiy@ivanov.biz>
[andy: fixed merge conflict with defined constants]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Here, This patch is to handle a return error from dell_get_intensity.
This change is done using Coccinelle.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Merge branch 'dell-laptop-changes-for-4.12' of
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
to avoid linux-next merge conflict with dell-laptop.c.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Make dell-wmi notify on hotkey kbd brightness changes, listen for this
in dell-laptop and call led_classdev_notify_brightness_hw_changed.
This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The kbd led code has multiple entry points each of which modifies the
kbd_state by reading it, modifying a copy, writing the copy and on
error setting the modified copy writing back the original state.
This is racy, so add a mutex protection the read-modify-write cycle
on each of the entry points.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Return -EINVAL immediately on invalid input, rather then doing
the straight path in an if block and returning -EINVAL at the end
of the function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
To ensure all users of dell-smbios are in drivers/platform/x86, move the
dell_micmute_led_set() method from drivers/leds/dell-led.c to
drivers/platform/x86/dell-laptop.c.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This is to support Latitude 7480 and many other newer Dell laptops.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
kbd_led_level_set uses dell_smbios call which blocks, so the kbd_led
classdev should use the brightness_set_blocking callback.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell_smi_error() is exported by dell-smbios, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_error().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The dell_smi_error() method could be used by modules other than
dell-laptop for convenient translation of SMBIOS request errors into
errno values. Thus, move it to dell-smbios.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Replace all uses of find_token_location() with dell_smbios_find_token()
to avoid directly accessing the da_tokens table.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Replace all uses of find_token_id() with dell_smbios_find_token() to
avoid directly accessing the da_tokens table.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Ultimately, the SMBIOS buffer should not be exported from dell-smbios.
Currently, dell-laptop accesses it directly using a global variable, so
make dell_smbios_get_buffer() return a pointer to the SMBIOS buffer and
replace all uses of the global variable with local variables.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Passing an SMBIOS buffer pointer to dell_smbios_send_request() is
redundant as it should always operate on the SMBIOS buffer exported from
the module.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell_send_request() is exported from the module, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_send_request().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As release_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As clear_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As get_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Extract SMBIOS-related code from dell-laptop to a new kernel module,
dell-smbios. The static specifier is removed from exported symbols,
otherwise code is just moved around.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
[dvhart: Include linux/io.h in dell-smbios.c as caught by lkp]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The hwswitch state can be changed at runtime, so make sure dell-laptop
always knows the current state. It can be modified by the userspace
utility smbios-wireless-ctl.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that return value of each SMBIOS call is properly checked and do
not continue processing output if the call failed.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that before initializing SMBIOS call, the input buffer does
not contain any garbage (e.g. values from previous SMBIOS call). This
fixes problems with passing undefined/random parameters to SMBIOS
functions.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
dell-laptop, a couple minor fixes, and some updated documentation in the
dell-laptop comments.
intel_pmc_ipc:
- Add Intel Apollo Lake PMC IPC driver
tc1100-wmi:
- Delete an unnecessary check before the function call "kfree"
dell-laptop:
- Fix allocating & freeing SMI buffer page
- Show info about WiGig and UWB in debugfs
- Update information about wireless control
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVmM8aAAoJEKbMaAwKp364iUkH/jihOduWkDTzzzxRP2Dv2nEh
qyvE94Nc9A9dl87C2+II/Pi1s8h4CJOQpl70syYYPc4FdF70hpvP8TbHkgCWrY/d
F8CoS9L9keviMtGOWlbEL9hBjfSDNwTMESTrDxrwhA04TSAwjDmXhhiUOF5FjFJm
CX5+ZQ3iXEH6KsENR+Er54J9+6WKE6IuRcnnKCapnPQ8cEYeVn+WEPyzHCOy8Pg3
xzzUar3/knS2VMIb5eIVpaKFvD9P9qBsC/gQ0pk1Y+686gwQZMVURDv8lw8hfXpx
TJDOXk21P8WbSH1r+jwax5wLjLge7vJtYG2Deye6MUgvSgg+O2tSVCv9SMQR088=
=WUgr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull late x86 platform driver updates from Darren Hart:
"The following came in a bit later and I wanted them to bake in next a
few more days before submitting, thus the second pull.
A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
dell-laptop, a couple minor fixes, and some updated documentation in
the dell-laptop comments.
intel_pmc_ipc:
- Add Intel Apollo Lake PMC IPC driver
tc1100-wmi:
- Delete an unnecessary check before the function call "kfree"
dell-laptop:
- Fix allocating & freeing SMI buffer page
- Show info about WiGig and UWB in debugfs
- Update information about wireless control"
* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
tc1100-wmi: Delete an unnecessary check before the function call "kfree"
dell-laptop: Fix allocating & freeing SMI buffer page
dell-laptop: Show info about WiGig and UWB in debugfs
dell-laptop: Update information about wireless control
asus-wmi: Fan control
dell*: Add Dell airplane mode switch driver
ideapad-laptop: Platform rfkill fixes, and regression fix
pvpanic: Handle missing _STA correctly
toshiba*: Rafactor bluetooth support, haps documentation, driver cleanup
other: Use acpi_video_unregister_backlight instead of acpi_video_unregister in
serveral drivers.
Orphan msi-wmi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVks/CAAoJEKbMaAwKp364M5kH/06QhbX8NBSrzZk96jTmiFrP
pSO1Z6Jwnm3SL/phUAaRusNVWh0ZsaezvQ6M3Lnsjeh+07qPsF+lag+nHGYXSrQJ
3LVOdqXAojnvPIPNxaTSXylypF776WqFcWwzksICaJo/RA8mE/I4S0A6PMzujivV
6aAZEApED9EFWgnBWz8yYDscTUF7Bypy5/6uNtI0CRXFwUw1C05f5LW5J/qPpIMW
lerSLJKQSpuGbK3db4TqlwJOCZXdSb3HgzLAQKvzhRCukyEdA3zL76Jj6DfVhE9d
nKybk30qYVy1smEWH/I2jMSrxcjY56pRnGhanc/U5gSo9WARGjed/XKtbkFqpSQ=
=9RCr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Fairly routine update for platform-drivers-x86.
Mostly fixes and cleanups, with a significant refactoring of toshiba*
drivers. Includes the addition of the dell-rbtn driver.
Details:
asus-wmi:
- fan control
dell*:
- add Dell airplane mode switch driver
ideapad-laptop:
- platform rfkill fixes, and regression fix
pvpanic:
- handle missing _STA correctly
toshiba*:
- rafactor bluetooth support
- haps documentation
- driver cleanup
other:
- Use acpi_video_unregister_backlight instead of
acpi_video_unregister in serveral drivers.
- Orphan msi-wmi.
* tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (24 commits)
MAINTAINERS: Orphan x86 driver msi-wmi
ideapad: fix software rfkill setting
dell-laptop: Use dell-rbtn instead i8042 filter when possible
dell-rbtn: Export notifier for other kernel modules
dell-rbtn: Dell Airplane Mode Switch driver
samsung-laptop: Use acpi_video_unregister_backlight instead of acpi_video_unregister
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
apple_gmux: Use acpi_video_unregister_backlight instead of acpi_video_unregister
pvpanic: handle missing _STA correctly
ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
asus-wmi: add fan control
Documentation/ABI: Add file describing the sysfs entries for toshiba_haps
toshiba_haps: Make use of DEVICE_ATTR_{RW, WO} macros
toshiba_haps: Replace sscanf with kstrtoint
toshiba_acpi: Bump driver version to 0.22
toshiba_acpi: Remove TOS_FAILURE check from some functions
toshiba_acpi: Comments cleanup
toshiba_acpi: Rename hci_{read, write}1 functions
toshiba_acpi: Remove no longer needed hci_{read, write}2 functions
toshiba_bluetooth: Change BT status message to debug
...
This commit fix kernel crash when probing for rfkill devices in dell-laptop
driver failed. Function free_page() was incorrectly used on struct page *
instead of virtual address of SMI buffer.
This commit also simplify allocating page for SMI buffer by using
__get_free_page() function instead of sequential call of functions
alloc_page() and page_address().
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This commit show additional information about rfkill state in debugfs based
on newly released documentation by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that all existing SMBIOS calls for wireless control are properly
documented. This commit also add new documentation released by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Until now module dell-laptop registered rfkill device which used i8042
filter function for receiving HW switch rfkill events (handling special
keycode).
But for some dell laptops there is native ACPI driver dell-rbtn which can
receive rfkill events (without i8042 hooks).
So this patch will combine best from both sides. It will use native ACPI
driver dell-rbtn for receiving events and dell-laptop SMBIOS interface for
enabling or disabling radio devices. If ACPI driver or device will not be
available fallback to i8042 filter function will be used.
Patch also changes module_init() to late_initcall() to ensure that init
function will be called after initializing dell-rbtn.c driver.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds the support for the configuration of the keyboard
backlight on supported Dell laptops.
With this patch it is possible to set:
* keyboard backlight level
* timeout after which the backlight will be automatically turned off
* input activity triggers (keyboard, touchpad, mouse) that enable the backlight
* ambient light settings
The settings are exposed via /sys/class/leds/dell::kbd_backlight/
The code is based on the newly released documentation by Dell in the
libsmbios project.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This reverts commit 02b2aaaa57.
This interface was determined to be flawed and required too invasive a
fix for the RC cycle. This will be revisited in 3.20.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
thinkpad-acpi: Switch to software mute, cleanups
acerhdf: Bang-bang thermal governor, new models, cleanups
dell-laptop: New keyboard backlight support and documentation
toshiba_acpi: Keyboard backlight updates, hotkey handling
dell-wmi: Keypress filtering, WMI event processing
eeepc-laptop: Multiple cleanups, improved error handling, documentation
hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
misc: Code cleanups, quirks, various new IDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUkw1OAAoJEKbMaAwKp364N0AH/A/1YQDjiIsrRe7/J65rfna+
zrH6QoQfEaTbkJX3p8VFElh0Tlx9EO7kYfxhHm45kjWjfuJsyZtEonl+CeZTEe2s
SGP1v3wSUbHc8MI1sRqqDUSTNihJPWEPjc8jFKqyJ3iOO0r6F/UuYajPwEGpjAjh
etHY9HBS8FNwaevh6T3tiKeyy+z34OZHsASCnZEYLKWYXRu/0dL3yNY1vIs3Ybux
bnH+sbBUXSu3rir4V6q/4j6f1B6RnXqirPLq5rsNHhHETGCJUy+phUWZRYMEVzR3
A3rEuHXcHMgqlVLqa+ph3nN3iyNYXVVkOfENUCp/2WDdagBqpD5isc6YmPCzsJk=
=1/XE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver update from Darren Hart:
- thinkpad-acpi: Switch to software mute, cleanups
- acerhdf: Bang-bang thermal governor, new models, cleanups
- dell-laptop: New keyboard backlight support and documentation
- toshiba_acpi: Keyboard backlight updates, hotkey handling
- dell-wmi: Keypress filtering, WMI event processing
- eeepc-laptop: Multiple cleanups, improved error handling, documentation
- hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
- misc: Code cleanups, quirks, various new IDs
* tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits)
platform/x86/acerhdf: Still depends on THERMAL
Documentation: Add entry for dell-laptop sysfs interface
acpi: Remove _OSI(Linux) for ThinkPads
thinkpad-acpi: Try to use full software mute control
acerhdf: minor clean up
acerhdf: added critical trip point
acerhdf: Use bang-bang thermal governor
acerhdf: Adding support for new models
acerhdf: Adding support for "manual mode"
dell-smo8800: Add more ACPI ids and change description of driver
platform: x86: dell-laptop: Add support for keyboard backlight
toshiba_acpi: Add keyboard backlight mode change event
toshiba_acpi: Change notify funtion to handle more events
toshiba_acpi: Move hotkey enabling code to its own function
dell-wmi: Don't report keypresses on keybord illumination change
dell-wmi: Don't report keypresses for radio state changes
hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
toshiba-acpi: Add missing ID (TOS6207)
Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put"
platform: x86: Deletion of checks before backlight_device_unregister()
...
This patch adds support for configuring keyboard backlight settings on supported
Dell laptops. It exports kernel leds interface and uses Dell SMBIOS tokens or
keyboard class interface.
With this patch it is possible to set:
* keyboard backlight level
* timeout after which will be backlight automatically turned off
* input activity triggers (keyboard, touchpad, mouse) which enable backlight
* ambient light settings
Settings are exported via sysfs:
/sys/class/leds/dell::kbd_backlight/
Code is based on newly released documentation by Dell in libsmbios project.
Thanks to Dan Carpenter who reported bug about unpredictable results in
quirks->kbd_timeouts for loop. His fix adds needs_kbd_timeouts flag to
quirk structure to indicate if kbd_timeouts array is empty or not.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Minor English corrections to comments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Instead of using a magic constant 0x20 in some drivers to get data only
from the KBC port we should use the constant defined in i8042.h with
the same value. Also, this makes these drivers uniform with what
constant the only other filter function uses in
drivers/input/misc/ideapad_slidebar.c.
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.
Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Installing the i8042 filter is not useful on machines where rfkill is not
whitelisted, so move the filter installation into dell_setup_rfkill,
after the whitelist check.
This avoids doing a needless and potentially troublesome rfkill query
(dell_send_request(buf, 17, 11)) when the wireless Fn key gets pressed on
non whitelisted laptops.
This patch was written as a result of:
https://bugzilla.redhat.com/show_bug.cgi?id=1045807
It is not yet clear if this is related, but it is a good idea to not register
the i8042 filter in general.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that Precision mobile workstations are top of the line Dell products,
I expect the functionality of rfkill there to be as reliable as on Latitudes
so whitelist Precisions.
https://bugzilla.kernel.org/show_bug.cgi?id=65731
Reported-by: Calum Lind <calumlind@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix to return error code instead always return 0 from function
dell_send_intensity().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
All my testing has been on laptops with a hw killswitch, so to be on the
safe side disable rfkill functionality on models without a hw killswitch for
now. Once we gather some feedback on laptops without a hw killswitch this
decision maybe reconsidered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Setting force_rfkill will cause the dell-laptop rfkill code to skip its
whitelist checks, this will allow individual users to override the whitelist,
as well as to gather info from users to improve the checks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some time is needed for the BIOS to do its work, but 250ms should be plenty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instead when hw-blocked always write 1 to the blocked bit for the radio in
question. This is necessary to properly set all the blocked bits for hw-switch
controlled radios to 1 after power-on and resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This is necessary for 3 reasons:
1) To apply sw_state changes made while hw-blocked
2) To set all the blocked bits for hw-switch controlled radios to 1 when the
switch gets changed to off, this is necessary on some models to actually
turn the radio status LEDs off.
3) On some models non hw-switch controlled radios will have their block bit
cleared (potentially undoing a soft-block) on hw-switch toggle, this
restores the sw-block in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This makes dell-laptop's rfkill code consistent with other drivers which
allow sw_state changes while hw blocked.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
On machines with a hardware switch, the blocking settings can not be changed
through a Fn + wireless-key combo, so there is no reason to read back the
blocking state from the BIOS.
Reading back is not only not necessary it is actually harmful, since on some
machines the blocking state will be cleared to all 0 after a wireless switch
toggle, even for radios not controlled by the hw-switch (yeah firmware bugs).
This causes "magic" changes to the sw_state. This is inconsistent with other
rfkill drivers which preserve the sw_state over a hw kill on / off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The query callback should only update the hw_state, see the comment in
net/rfkill/core.c in rfkill_set_block, which is its only caller.
rfkill_set_block will modify the sw_state directly after calling query so
calling set_sw_state is an expensive NOP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Kai Heng Feng