Commit Graph

182 Commits

Author SHA1 Message Date
Chaitanya Kulkarni 179d160072 block: remove superfluous param in blk_fill_rwbs()
The last parameter for the function blk_fill_rwbs() was added in
5782138e47 ("tracing/events: convert block trace points to
TRACE_EVENT()") in order to signal read request and use of that parameter
was replaced with using switch case REQ_OP_READ with
1b9a9ab78b ("blktrace: use op accessors"), but the parameter was never
removed.

Remove the unused parameter and adjust the respective call sites.

Fixes: 1b9a9ab78b ("blktrace: use op accessors")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-22 06:37:41 -07:00
Christoph Hellwig 309dca309f block: store a block_device pointer in struct bio
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device.  From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 18:17:20 -07:00
Linus Torvalds 09c0796adf Tracing updates for 5.11
The major update to this release is that there's a new arch config option called:
 CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it.
 All the ftrace callbacks now take a struct ftrace_regs instead of a struct
 pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then
 the ftrace_regs will have enough information to read the arguments of the
 function being traced, as well as access to the stack pointer. This way, if
 a user (like live kernel patching) only cares about the arguments, then it
 can avoid using the heavier weight "regs" callback, that puts in enough
 information in the struct ftrace_regs to simulate a breakpoint exception
 (needed for kprobes).
 
 New config option that audits the timestamps of the ftrace ring buffer at
 most every event recorded.  The "check_buffer()" calls will conflict with
 mainline, because I purposely added the check without including the fix that
 it caught, which is in mainline. Running a kernel built from the commit of
 the added check will trigger it.
 
 Ftrace recursion protection has been cleaned up to move the protection to
 the callback itself (this saves on an extra function call for those
 callbacks).
 
 Perf now handles its own RCU protection and does not depend on ftrace to do
 it for it (saving on that extra function call).
 
 New debug option to add "recursed_functions" file to tracefs that lists all
 the places that triggered the recursion protection of the function tracer.
 This will show where things need to be fixed as recursion slows down the
 function tracer.
 
 The eval enum mapping updates done at boot up are now offloaded to a work
 queue, as it caused a noticeable pause on slow embedded boards.
 
 Various clean ups and last minute fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX9uq8xQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qtrwAQCHevqWMjKc1Q76bnCgwB0AbFKB6vqy
 5b6g/co5+ihv8wD/eJPWlZMAt97zTVW7bdp5qj/GTiCDbAsODMZ597LsxA0=
 =rZEz
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "The major update to this release is that there's a new arch config
  option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.

  Currently, only x86_64 enables it. All the ftrace callbacks now take a
  struct ftrace_regs instead of a struct pt_regs. If the architecture
  has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
  have enough information to read the arguments of the function being
  traced, as well as access to the stack pointer.

  This way, if a user (like live kernel patching) only cares about the
  arguments, then it can avoid using the heavier weight "regs" callback,
  that puts in enough information in the struct ftrace_regs to simulate
  a breakpoint exception (needed for kprobes).

  A new config option that audits the timestamps of the ftrace ring
  buffer at most every event recorded.

  Ftrace recursion protection has been cleaned up to move the protection
  to the callback itself (this saves on an extra function call for those
  callbacks).

  Perf now handles its own RCU protection and does not depend on ftrace
  to do it for it (saving on that extra function call).

  New debug option to add "recursed_functions" file to tracefs that
  lists all the places that triggered the recursion protection of the
  function tracer. This will show where things need to be fixed as
  recursion slows down the function tracer.

  The eval enum mapping updates done at boot up are now offloaded to a
  work queue, as it caused a noticeable pause on slow embedded boards.

  Various clean ups and last minute fixes"

* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Offload eval map updates to a work queue
  Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
  ring-buffer: Add rb_check_bpage in __rb_allocate_pages
  ring-buffer: Fix two typos in comments
  tracing: Drop unneeded assignment in ring_buffer_resize()
  tracing: Disable ftrace selftests when any tracer is running
  seq_buf: Avoid type mismatch for seq_buf_init
  ring-buffer: Fix a typo in function description
  ring-buffer: Remove obsolete rb_event_is_commit()
  ring-buffer: Add test to validate the time stamp deltas
  ftrace/documentation: Fix RST C code blocks
  tracing: Clean up after filter logic rewriting
  tracing: Remove the useless value assignment in test_create_synth_event()
  livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
  ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
  ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
  MAINTAINERS: assign ./fs/tracefs to TRACING
  tracing: Fix some typos in comments
  ftrace: Remove unused varible 'ret'
  ring-buffer: Add recording of ring buffer recursion into recursed_functions
  ...
2020-12-17 13:22:17 -08:00
Linus Torvalds ac7ac4618c for-5.11/block-2020-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/Xec8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpoLbEACzXypgZWwMdfgRckA/Vt333rXHtbhUV+hK
 2XP+P81iRvr9Esi31UPbRp82vrgcDO0cpI1QmQojS5U5TIQP88BfXptfRZZu48eb
 wT5RDDNQ34HItqAh/yEuYsv9yUKcxeIrB99tBVvM+4UmQg9zTdIW3mg6PvCBdbhV
 N38jI0tCF/PJatjfRuphT/nXonQLPWBlVDmZk06KZQFOwQe9ep1vUi1+nbiRPuo3
 geFBpTh1Kp6Vl1B3n4RpECs6Y7I0RRuJdaH2sDizICla1/BW91F9fQwHimNnUxUq
 e1Q1kMuh6ftcQGkYlHSYcPhuv6CvorldTZCO5arPxWpcwvxriTSMRPWAgUr5pEiF
 fhiGhqeDu9e6vl9vS31wUD1B30hy+jFz9wyjRrDwJ3cPHH1JVBjTzvdX+cIh/1ku
 IbIwUMteUtvUrzqAv/DzbGhedp7xWtOFaVo8j0QFYh9zkjd6b8yDOF/yztwX2gjY
 Xt1cd+KpDSiN449ZRaoMI0sCJAxqzhMa6nsWlb0L7KuNyWKAbvKQBm9Rb47FLV9A
 Vx70KC+zkFoyw23capvIahmQazerriUJ5PGe0lVm6ROgmIFdCpXTPDjnrvq/6RZ/
 GEpD7gTW9atGJ7EuEE8686sAfKD5kneChWLX5EHXf0d0AG5Mr2lKsluiGp5LpPJg
 Q1Xqs6xwww==
 =zo4w
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...
2020-12-16 12:57:51 -08:00
Jani Nikula abf4e00c7b blktrace: make relay callbacks const
Now that relay_open() accepts const callbacks, make relay callbacks
const.

Link: https://lkml.kernel.org/r/7ff5ce0b735901eb4f10e13da2704f1d8c4a2507.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:18 -08:00
Christoph Hellwig 45dc656aeb blktrace: fix up a kerneldoc comment
Fixes: a54895fa05 ("block: remove the request_queue to argument request based tracepoints")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07 13:20:31 -07:00
Christoph Hellwig a54895fa05 block: remove the request_queue to argument request based tracepoints
The request_queue can trivially be derived from the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig 1c02fca620 block: remove the request_queue argument to the block_bio_remap tracepoint
The request_queue can trivially be derived from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig eb6f7f7cd3 block: remove the request_queue argument to the block_split tracepoint
The request_queue can trivially be derived from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig e8a676d61c block: simplify and extend the block_bio_merge tracepoint class
The block_bio_merge tracepoint class can be reused for most bio-based
tracepoints.  For that it just needs to lose the superfluous q and rq
parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig b81b8f40c5 block: remove the unused block_sleeprq tracepoint
The block_sleeprq tracepoint was only used by the legacy request code.
Remove it now that the legacy request code is gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig 0d02129e76 block: merge struct block_device and struct hd_struct
Instead of having two structures that represent each block device with
different life time rules, merge them into a single one.  This also
greatly simplifies the reference counting rules, as we can use the inode
reference count as the main reference count for the new struct
block_device, with the device model reference front ending it for device
model interaction.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01 14:53:40 -07:00
Christoph Hellwig 29ff57c610 block: move the start_sect field to struct block_device
Move the start_sect field to struct block_device in preparation
of killing struct hd_struct.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01 14:53:40 -07:00
Christoph Hellwig a782483cc1 block: remove the nr_sects field in struct hd_struct
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.

Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes.  By only using the block_device field
this problem also gets fixed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de>			[bcache]
Acked-by: Chao Yu <yuchao0@huawei.com>			[f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01 14:53:40 -07:00
Qiujun Huang 2b5894cc33 tracing: Fix some typos in comments
s/detetector/detector/
s/enfoced/enforced/
s/writen/written/
s/actualy/actually/
s/bascially/basically/
s/Regarldess/Regardless/
s/zeroes/zeros/
s/followd/followed/
s/incrememented/incremented/
s/separatelly/separately/
s/accesible/accessible/
s/sythetic/synthetic/
s/enabed/enabled/
s/heurisitc/heuristic/
s/assocated/associated/
s/otherwides/otherwise/
s/specfied/specified/
s/seaching/searching/
s/hierachry/hierarchy/
s/internel/internal/
s/Thise/This/

Link: https://lkml.kernel.org/r/20201029150554.3354-1-hqjagain@gmail.com

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-10 20:39:40 -05:00
Christoph Hellwig 10ed16662d block: add a bdget_part helper
All remaining callers of bdget() outside of fs/block_dev.c want to get a
reference to the struct block_device for a given struct hd_struct.  Add
a helper just for that and then mark bdget static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05 10:38:33 -06:00
Christoph Hellwig fa01b1e973 block: add a bdev_is_partition helper
Add a littler helper to make the somewhat arcane bd_contains checks a
little more obvious.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25 08:18:57 -06:00
Wang Hai e75ad2cc41 blktrace: make function blk_trace_bio_get_cgid() static
The sparse tool complains as follows:

kernel/trace/blktrace.c:796:5: warning:
 symbol 'blk_trace_bio_get_cgid' was not declared. Should it be static?

This function is not used outside of blktrace.c, so this commit
marks it static.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-07 20:11:15 -06:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Jan Kara f3bdc62fd8 blktrace: Provide event for request merging
Currently blk-mq does not report any event when two requests get merged
in the elevator. This then results in difficult to understand sequence
of events like:

...
  8,0   34     1579     0.608765271  2718  I  WS 215023504 + 40 [dbench]
  8,0   34     1584     0.609184613  2719  A  WS 215023544 + 56 <- (8,4) 2160568
  8,0   34     1585     0.609184850  2719  Q  WS 215023544 + 56 [dbench]
  8,0   34     1586     0.609188524  2719  G  WS 215023544 + 56 [dbench]
  8,0    3      602     0.609684162   773  D  WS 215023504 + 96 [kworker/3:1H]
  8,0   34     1591     0.609843593     0  C  WS 215023504 + 96 [0]

and you can only guess (after quite some headscratching since the above
excerpt is intermixed with a lot of other IO) that request 215023544+56
got merged to request 215023504+40. Provide proper event for request
merging like we used to do in the legacy block layer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-25 21:06:11 -06:00
Luis Chamberlain 85e0cbbb8a block: create the request_queue debugfs_dir on registration
We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.

Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:58 -06:00
Luis Chamberlain b431ef837e blktrace: ensure our debugfs dir exists
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.

This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.

blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.

debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:58 -06:00
Luis Chamberlain bad8e64fb1 blktrace: fix debugfs use after free
On commit 6ac93117ab ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.

We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.

We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].

We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:

[  252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[  252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[  252.436592] #PF: supervisor write access in kernel mode
[  252.439822] #PF: error_code(0x0002) - not-present page
[  252.442967] PGD 0 P4D 0
[  252.444656] Oops: 0002 [#1] SMP NOPTI
[  252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G            E     5.7.0-rc2-next-20200420+ #164
[  252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[  252.456343] RIP: 0010:down_write+0x15/0x40
[  252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
               cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
               00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
               45 08 5d
[  252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[  252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[  252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[  252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[  252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[  252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[  252.473346] FS:  00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[  252.475225] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[  252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  252.479866] Call Trace:
[  252.480322]  simple_recursive_removal+0x4e/0x2e0
[  252.481078]  ? debugfs_remove+0x60/0x60
[  252.481725]  ? relay_destroy_buf+0x77/0xb0
[  252.482662]  debugfs_remove+0x40/0x60
[  252.483518]  blk_remove_buf_file_callback+0x5/0x10
[  252.484328]  relay_close_buf+0x2e/0x60
[  252.484930]  relay_open+0x1ce/0x2c0
[  252.485520]  do_blk_trace_setup+0x14f/0x2b0
[  252.486187]  __blk_trace_setup+0x54/0xb0
[  252.486803]  blk_trace_ioctl+0x90/0x140
[  252.487423]  ? do_sys_openat2+0x1ab/0x2d0
[  252.488053]  blkdev_ioctl+0x4d/0x260
[  252.488636]  block_ioctl+0x39/0x40
[  252.489139]  ksys_ioctl+0x87/0xc0
[  252.489675]  __x64_sys_ioctl+0x16/0x20
[  252.490380]  do_syscall_64+0x52/0x180
[  252.491032]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

And the other on the device removal:

[  128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[  128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[  128.619537] #PF: supervisor write access in kernel mode
[  128.622700] #PF: error_code(0x0002) - not-present page
[  128.625842] PGD 0 P4D 0
[  128.627585] Oops: 0002 [#1] SMP NOPTI
[  128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G            E     5.7.0-rc2-next-20200420+ #164
[  128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[  128.640471] RIP: 0010:down_write+0x15/0x40
[  128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
               cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
               00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
               45 08 5d
[  128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[  128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[  128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[  128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[  128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[  128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[  128.660500] FS:  00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[  128.662204] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[  128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  128.667282] Call Trace:
[  128.667801]  simple_recursive_removal+0x4e/0x2e0
[  128.668663]  ? debugfs_remove+0x60/0x60
[  128.669368]  debugfs_remove+0x40/0x60
[  128.669985]  blk_trace_free+0xd/0x50
[  128.670593]  __blk_trace_remove+0x27/0x40
[  128.671274]  blk_trace_shutdown+0x30/0x40
[  128.671935]  blk_release_queue+0x95/0xf0
[  128.672589]  kobject_put+0xa5/0x1b0
[  128.673188]  disk_release+0xa2/0xc0
[  128.673786]  device_release+0x28/0x80
[  128.674376]  kobject_put+0xa5/0x1b0
[  128.674915]  loop_remove+0x39/0x50 [loop]
[  128.675511]  loop_control_ioctl+0x113/0x130 [loop]
[  128.676199]  ksys_ioctl+0x87/0xc0
[  128.676708]  __x64_sys_ioctl+0x16/0x20
[  128.677274]  do_syscall_64+0x52/0x180
[  128.677823]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The common theme here is:

debugfs: Directory 'loop0' with parent 'block' already present

This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.

We don't create the block debugfs directory on init for these types of
block devices:

  * request-based block driver block devices
  * every possible partition
  * scsi-generic

And so, this race should in theory only be possible with make_request
drivers.

We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.

This goes tested with:

  o nvme partitions
  o ISCSI with tgt, and blktracing against scsi-generic with:
    o block
    o tape
    o cdrom
    o media changer
  o blktests

This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.

Fixes: 6ac93117ab ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:58 -06:00
Luis Chamberlain a67549c8e5 blktrace: annotate required lock on do_blk_trace_setup()
Ensure it is clear which lock is required on do_blk_trace_setup().

Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:58 -06:00
Jan Kara c3dbe541ef blktrace: Avoid sparse warnings when assigning q->blk_trace
Mostly for historical reasons, q->blk_trace is assigned through xchg()
and cmpxchg() atomic operations. Although this is correct, sparse
complains about this because it violates rcu annotations since commit
c780e86dd4 ("blktrace: Protect q->blk_trace with RCU") which started
to use rcu for accessing q->blk_trace. Furthermore there's no real need
for atomic operations anymore since all changes to q->blk_trace happen
under q->blk_trace_mutex and since it also makes more sense to check if
q->blk_trace is set with the mutex held earlier.

So let's just replace xchg() with rcu_replace_pointer() and cmpxchg()
with explicit check and rcu_assign_pointer(). This makes the code more
efficient and sparse happy.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17 09:07:11 -06:00
Luis Chamberlain 1b0b283648 blktrace: break out of blktrace setup on concurrent calls
We use one blktrace per request_queue, that means one per the entire
disk.  So we cannot run one blktrace on say /dev/vda and then /dev/vda1,
or just two calls on /dev/vda.

We check for concurrent setup only at the very end of the blktrace setup though.

If we try to run two concurrent blktraces on the same block device the
second one will fail, and the first one seems to go on. However when
one tries to kill the first one one will see things like this:

The kernel will show these:

```
debugfs: File 'dropped' in directory 'nvme1n1' already present!
debugfs: File 'msg' in directory 'nvme1n1' already present!
debugfs: File 'trace0' in directory 'nvme1n1' already present!
``

And userspace just sees this error message for the second call:

```
blktrace /dev/nvme1n1
BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error
```

The first userspace process #1 will also claim that the files
were taken underneath their nose as well. The files are taken
away form the first process given that when the second blktrace
fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN.
This means that even if go-happy process #1 is waiting for blktrace
data, we *have* been asked to take teardown the blktrace.

This can easily be reproduced with break-blktrace [0] run_0005.sh test.

Just break out early if we know we're already going to fail, this will
prevent trying to create the files all over again, which we know still
exist.

[0] https://github.com/mcgrof/break-blktrace

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17 09:07:11 -06:00
Chaitanya Kulkarni 5aec598c45 blktrace: fix endianness for blk_log_remap()
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04 21:23:38 -06:00
Chaitanya Kulkarni 71df3fd82e blktrace: fix endianness in get_pdu_int()
In function get_pdu_len() replace variable type from __u64 to
__be64. This fixes sparse warning.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04 21:23:38 -06:00
Chaitanya Kulkarni 48bc3cd3e0 blktrace: use errno instead of bi_status
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04 21:23:38 -06:00
Christoph Hellwig d24de76af8 block: remove the error argument to the block_bio_complete tracepoint
The status can be trivially derived from the bio itself.  That also avoid
callers like NVMe to incorrectly pass a blk_status_t instead of the errno,
and the overhead of translating the blk_status_t to the errno in the I/O
completion fast path when no tracing is enabled.

Fixes: 35fe0d12c8 ("nvme: trace bio completion")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04 21:16:11 -06:00
Jan Kara 870c153cf0 blktrace: Report pid with note messages
Currently informational messages within block trace do not have PID
information of the process reporting the message included. With BFQ it
is sometimes useful to have the information and there's no good reason
to omit the information from the trace. So just fill in pid information
when generating note message.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-16 14:29:39 -06:00
Cengiz Can 153031a301 blktrace: fix dereference after null check
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.

However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:

Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.

```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898            ret = 0;
1899            if (bt == NULL)
1900                    ret = blk_trace_setup_queue(q, bdev);
1901
1902            if (ret == 0) {
1903                    if (attr == &dev_attr_act_mask)
>>>     CID 1460458:  Null pointer dereferences  (FORWARD_NULL)
>>>     Dereferencing null pointer "bt".
1904                            bt->act_mask = value;
1905                    else if (attr == &dev_attr_pid)
1906                            bt->pid = value;
1907                    else if (attr == &dev_attr_start_lba)
1908                            bt->start_lba = value;
1909                    else if (attr == &dev_attr_end_lba)
```

Added a reassignment with RCU annotation to fix the issue.

Fixes: c780e86dd4 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-05 13:42:40 -07:00
Jan Kara c780e86dd4 blktrace: Protect q->blk_trace with RCU
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 08:40:07 -07:00
Steven Rostedt (VMware) 1329249437 tracing: Make struct ring_buffer less ambiguous
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:

   perf's ring_buffer -> perf_buffer
   ftrace's ring_buffer -> trace_buffer

This implements the changes to the ring buffer that ftrace uses.

Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-13 13:19:38 -05:00
Steven Rostedt (VMware) 1c5eb4481e tracing: Rename trace_buffer to array_buffer
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.

As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.

Link: https://lore.kernel.org/r/20191213153553.GE20583@krava

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-13 13:19:38 -05:00
Tejun Heo 743210386c cgroup: use cgrp->kn->id as the cgroup ID
cgroup ID is currently allocated using a dedicated per-hierarchy idr
and used internally and exposed through tracepoints and bpf.  This is
confusing because there are tracepoints and other interfaces which use
the cgroupfs ino as IDs.

The preceding changes made kn->id exposed as ino as 64bit ino on
supported archs or ino+gen (low 32bits as ino, high gen).  There's no
reason for cgroup to use different IDs.  The kernfs IDs are unique and
userland can easily discover them and map them back to paths using
standard file operations.

This patch replaces cgroup IDs with kernfs IDs.

* cgroup_id() is added and all cgroup ID users are converted to use it.

* kernfs_node creation is moved to earlier during cgroup init so that
  cgroup_id() is available during init.

* While at it, s/cgroup/cgrp/ in psi helpers for consistency.

* Fallback ID value is changed to 1 to be consistent with root cgroup
  ID.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:04 -08:00
Tejun Heo 40430452fd kernfs: use 64bit inos if ino_t is 64bit
Each kernfs_node is identified with a 64bit ID.  The low 32bit is
exposed as ino and the high gen.  While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.

This patch exposes IDs directly as inos on 64bit ino archs.  The
conversion is mostly straight-forward.

* 32bit ino archs behave the same as before.  64bit ino archs now use
  the whole 64bit ID as ino and the generation number is fixed at 1.

* 64bit inos still use the same idr allocator which gurantees that the
  lower 32bits identify the current live instance uniquely and the
  high 32bits are incremented whenever the low bits wrap.  As the
  upper 32bits are no longer used as gen and we don't wanna start ino
  allocation with 33rd bit set, the initial value for highbits
  allocation is changed to 0 on 64bit ino archs.

* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
  the issuing cgroup.  Userland builds FILEID_INO32_GEN fids from
  these numbers to look up the cgroups.  To remain compatible with the
  behavior, always output (LOW32,HIGH32) which will be constructed
  back to the original 64bit ID by __kernfs_fh_to_dentry().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:04 -08:00
Tejun Heo 67c0496e87 kernfs: convert kernfs_node->id from union kernfs_node_id to u64
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value.  I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to.  Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.

This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper.  Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen.  This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.

This patch doesn't make any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
2019-11-12 08:18:03 -08:00
Greg Kroah-Hartman 3e6f176f30 blktrace: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03 15:39:39 +02:00
Mathieu Malaterre f6d85f04e2 blkcg: annotate implicit fall through
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warning (W=1).

This commit remove the following warning:

  kernel/trace/blktrace.c:725:9: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 14:31:12 -06:00
Dennis Zhou db6638d7d1 blkcg: remove bio->bi_css and instead use bio->bi_blkg
Prior patches ensured that any bio that interacts with a request_queue
is properly associated with a blkg. This makes bio->bi_css unnecessary
as blkg maintains a reference to blkcg already.

This removes the bio field bi_css and transfers corresponding uses to
access via bi_blkg.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:37 -07:00
Dennis Zhou b5f2954d30 blkcg: revert blkcg cleanups series
This reverts a series committed earlier due to null pointer exception
bug report in [1]. It seems there are edge case interactions that I did
not consider and will need some time to understand what causes the
adverse interactions.

The original series can be found in [2] with a follow up series in [3].

[1] https://www.spinics.net/lists/cgroups/msg20719.html
[2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/

This reverts the following commits:
d459d853c2, b2c3fa5467, 101246ec02, b3b9f24f5f, e2b0989954,
f0fcb3ec89, c839e7a03f, bdc2491708, 74b7c02a9b, 5bf9a1f3b4,
a7b39b4e96, 07b05bcc32, 49f4c2dc2b, 27e6fa996c

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01 19:59:53 -06:00
Dennis Zhou (Facebook) c839e7a03f blkcg: remove bio->bi_css and instead use bio->bi_blkg
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.

This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:13 -06:00
Linus Torvalds 5bed49adfe for-4.19/post-20180822
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlt9on8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpj1xEADKBmJlV9aVyxc5w6XggqAGeHqI4afFrl+v
 9fW6WUQMAaBUrr7PMIEJQ0Zm4B7KxgBaEWNtuuj4ULkjpgYm2AuGUuTJSyKz41rS
 Ma+KNyCA2Zmq4SvwGFbcdCuCbUqnoxTycscAgCjuDvIYLW0+nFGNc47ibmu9lZIV
 33Ef5LrxuCjhC2zyNxEdWpUxDCjoYzock85LW+wYyIYLU9uKdoExS+YmT8U+ebA/
 AkXBcxPztNDxwkcsIwgGVoTjwxiowqGz3uueWfyEmYgaCPiNOsxkoNQAtjX4ykQE
 hnqnHWyzJkRwbYo7Vd/bRAZXvszKGYE1YcJmu5QrNf0dK5MSq2o5OYJAEJWbucPj
 m0R2u7O9qbS2JEnxGrm5+oYJwBzwNY5/Lajr15WkljTqobKnqcvn/Hdgz/XdGtek
 0S1QHkkBsF7e+cax8sePWK+O3ilY7pl9CzyZKB/tJngl8A45Jv8xVojg0v3O7oS+
 zZib0rwWg/bwR/uN6uPCDcEsQusqL5YovB7m6NRVshwz6cV1zVNp2q+iOulk7KuC
 MprW4Du9CJf8HA19XtyJIG1XLstnuz+Exy+i5BiimUJ5InoEFDuj/6OZa6Qaczbo
 SrDDvpGtSf4h7czKpE5kV4uZiTOrjuI30TrI+4csdZ7HQIlboxNL72seNTLJs55F
 nbLjRM8L6g==
 =FS7e
 -----END PGP SIGNATURE-----

Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:

 - Set of bcache fixes and changes (Coly)

 - The flush warn fix (me)

 - Small series of BFQ fixes (Paolo)

 - wbt hang fix (Ming)

 - blktrace fix (Steven)

 - blk-mq hardware queue count update fix (Jianchao)

 - Various little fixes

* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
  block/DAC960.c: make some arrays static const, shrinks object size
  blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
  blk-mq: init hctx sched after update ctx and hctx mapping
  block: remove duplicate initialization
  tracing/blktrace: Fix to allow setting same value
  pktcdvd: fix setting of 'ret' error return for a few cases
  block: change return type to bool
  block, bfq: return nbytes and not zero from struct cftype .write() method
  block, bfq: improve code of bfq_bfqq_charge_time
  block, bfq: reduce write overcharge
  block, bfq: always update the budget of an entity when needed
  block, bfq: readd missing reset of parent-entity service
  blk-wbt: fix IO hang in wbt_wait()
  block: don't warn for flush on read-only device
  bcache: add the missing comments for smp_mb()/smp_wmb()
  bcache: remove unnecessary space before ioctl function pointer arguments
  bcache: add missing SPDX header
  bcache: move open brace at end of function definitions to next line
  bcache: add static const prefix to char * array declarations
  bcache: fix code comments style
  ...
2018-08-22 13:38:05 -07:00
Linus Torvalds 7140ad3898 Updates for v4.19:
- Restructure of lockdep and latency tracers
 
    This is the biggest change. Joel Fernandes restructured the hooks
    from irqs and preemption disabling and enabling. He got rid of
    a lot of the preprocessor #ifdef mess that they caused.
 
    He turned both lockdep and the latency tracers to use trace events
    inserted in the preempt/irqs disabling paths. But unfortunately,
    these started to cause issues in corner cases. Thus, parts of the
    code was reverted back to where lockde and the latency tracers
    just get called directly (without using the trace events).
    But because the original change cleaned up the code very nicely
    we kept that, as well as the trace events for preempt and irqs
    disabling, but they are limited to not being called in NMIs.
 
  - Have trace events use SRCU for "rcu idle" calls. This was required
    for the preempt/irqs off trace events. But it also had to not
    allow them to be called in NMI context. Waiting till Paul makes
    an NMI safe SRCU API.
 
  - New notrace SRCU API to allow trace events to use SRCU.
 
  - Addition of mcount-nop option support
 
  - SPDX headers replacing GPL templates.
 
  - Various other fixes and clean ups.
 
  - Some fixes are marked for stable, but were not fully tested
    before the merge window opened.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
 c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
 =vgEr
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

 - Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

 - New notrace SRCU API to allow trace events to use SRCU.

 - Addition of mcount-nop option support

 - SPDX headers replacing GPL templates.

 - Various other fixes and clean ups.

 - Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...
2018-08-20 18:32:00 -07:00
Steven Rostedt (VMware) 757d914007 tracing/blktrace: Fix to allow setting same value
Masami Hiramatsu reported:

  Current trace-enable attribute in sysfs returns an error
  if user writes the same setting value as current one,
  e.g.

    # cat /sys/block/sda/trace/enable
    0
    # echo 0 > /sys/block/sda/trace/enable
    bash: echo: write error: Invalid argument
    # echo 1 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable
    bash: echo: write error: Device or resource busy

  But this is not a preferred behavior, it should ignore
  if new setting is same as current one. This fixes the
  problem as below.

    # cat /sys/block/sda/trace/enable
    0
    # echo 0 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable

Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb8 ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-16 14:13:56 -06:00
Steven Rostedt (VMware) 91c1e6ba39 blktrace: Add SPDX License format header
Add the SPDX License header to ease license compliance management.

Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-16 15:49:02 -04:00
Liu Bo e1a413245a Blktrace: bail out early if block debugfs is not configured
Since @blk_debugfs_root couldn't be configured dynamically, we can
save a few memory allocation if it's not there.

Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:52 -06:00
Jens Axboe 2967acbb25 blktrace: fix trace mutex deadlock
A previous commit changed the locking around registration/cleanup,
but direct callers of blk_trace_remove() were missed. This means
that if we hit the error path in setup, we will deadlock on
attempting to re-acquire the queue trace mutex.

Fixes: 1f2cac107c ("blktrace: fix unlocked access to init/start-stop/teardown")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-27 12:03:58 -07:00
Marcos Paulo de Souza 1690102de5 blktrace: Use blk_trace_bio_get_cgid inside blk_add_trace_bio
We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio().
Since both are readily available in the function already, kill the
argument.

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>

Rewrote commit message.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-19 12:37:26 -07:00