- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zHa6
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.7 rc1. They are based on a
commit earlier in the merge window and have been tested in linux-next
for a while.
MMC core:
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly"
* tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: longer timeout for long read time quirk
mmc: dw_mmc: rockchip: Set the drive phase properly
mmc: dw_mmc: fix the wrong max_blk_size
mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities
mmc: sdhci-acpi: Ensure connected devices are powered when probing
ACPI / PM: Export acpi_device_fix_up_power()
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rO5z
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Additional ACPI update for v4.7-rc1
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson)"
* tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Correctly serialise with the pending async probe
1/ Device DAX for persistent memory:
Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped
without need of an intervening file system. Device DAX is strict,
precise and predictable. Specifically this interface:
a) Guarantees fault granularity with respect to a given page size
(pte, pmd, or pud) set at configuration time.
b) Enforces deterministic behavior by being strict about what fault
scenarios are supported.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance/feature differentiated
memory ranges.
2/ Support for the HPE DSM (device specific method) command formats.
This enables management of these first generation devices until a
unified DSM specification materializes.
3/ Further ACPI 6.1 compliance with support for the common dimm
identifier format.
4/ Various fixes and cleanups across the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXQhdeAAoJEB7SkWpmfYgCYP8P/RAgHkroL5lUKKU45TQUBKcY
diC9POeNSccme4tIRIQCGQUZ7+7mKM5ECv2ulF4xYOHvFBCcd/8OF6xKAXs48r3v
oguYhvX1YvIkBc9FUfBQbR1IsCOJ7uWp/UYiYCIQEXS5tS9Jv545j3ASqDt9xWoV
TWlceZn3yWSbASiV9qZ2eXhEkk75pg4yara++rsm2/7rs/TTXn5EIjBs+57BtAo+
6utI4fTy0CQvBYwVzam3m7y9dt2Z2jWXL4hgmT7pkvJ7HDoctVly0P9+bknJPUAo
g+NugKgTGeiqH5GYp5CTZ9KvL91sDF4q00pfinITVdFl0E3VE293cIHlAzSQBm5/
w58xxaRV958ZvpH7EaBmYQG82QDi/eFNqeHqVGn0xAM6MlaqO7avUMQp2lRPYMCJ
u1z/NloR5yo+sffHxsn5Luiq9KqOf6zk33PuxEkKbN74OayCSPn/SeVCO7rQR0B6
yPMJTTcTiCLnId1kOWAPaEmuK2U3BW/+ogg7hKgeCQSysuy5n6Ok5a2vEx/gJRAm
v9yF68RmIWumpHr+QB0TmB8mVbD5SY+xWTm3CqJb9MipuFIOF7AVsPyTgucBvE7s
v+i5F6MDO6tcVfiDT4AiZEt6D2TM5RbtckkUEX3ZTD6j7CGuR5D8bH0HNRrghrYk
KT1lAk6tjWBOGAHc5Ji7
=Y3Xv
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this update was stabilized before the merge window and
appeared in -next. The "device dax" implementation was revised this
week in response to review feedback, and to address failures detected
by the recently expanded ndctl unit test suite.
Not included in this pull request are two dax topic branches (dax
error handling, and dax radix-tree locking). These topics were
deferred to get a few more days of -next integration testing, and to
coordinate a branch baseline with Ted and the ext4 tree. Vishal and
Ross will send the error handling and locking topics respectively in
the next few days.
This branch has received a positive build result from the kbuild robot
across 226 configs.
Summary:
- Device DAX for persistent memory: Device DAX is the device-centric
analogue of Filesystem DAX (CONFIG_FS_DAX). It allows memory
ranges to be allocated and mapped without need of an intervening
file system. Device DAX is strict, precise and predictable.
Specifically this interface:
a) Guarantees fault granularity with respect to a given page size
(pte, pmd, or pud) set at configuration time.
b) Enforces deterministic behavior by being strict about what
fault scenarios are supported.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance/feature
differentiated memory ranges.
- Support for the HPE DSM (device specific method) command formats.
This enables management of these first generation devices until a
unified DSM specification materializes.
- Further ACPI 6.1 compliance with support for the common dimm
identifier format.
- Various fixes and cleanups across the subsystem"
* tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits)
libnvdimm, dax: fix deletion
libnvdimm, dax: fix alignment validation
libnvdimm, dax: autodetect support
libnvdimm: release ida resources
Revert "block: enable dax for raw block devices"
/dev/dax, core: file operations and dax-mmap
/dev/dax, pmem: direct access to persistent memory
libnvdimm: stop requiring a driver ->remove() method
libnvdimm, dax: record the specified alignment of a dax-device instance
libnvdimm, dax: reserve space to store labels for device-dax
libnvdimm, dax: introduce device-dax infrastructure
nfit: add sysfs dimm 'family' and 'dsm_mask' attributes
tools/testing/nvdimm: ND_CMD_CALL support
nfit: disable vendor specific commands
nfit: export subsystem ids as attributes
nfit: fix format interface code byte order per ACPI6.1
nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism
nfit, libnvdimm: clarify "commands" vs "_DSMs"
libnvdimm: increase max envelope size for ioctl
acpi/nfit: Add sysfs "id" for NVDIMM ID
...
async_synchronize_cookie() only serialises all tasks up to the specified
cookie, and importantly does not wait for the task corresponding with
the cookie. [This is so that it can be trivially used from inside the
async_func_t in order to serialise with all preceding tasks.] In order
to serialise with acpi_battery_init_async() we need to compensate and
pass in the next cookie instead.
The impact today is zero since performing an async_schedule() from inside
a module init function will trigger an async_synchronize_full() prior to
the module loader's completion. However, if the probe was moved to its
own unregistered async_domain, then the async_synchronize_cookie would
be replaced with an async_synchronize_full_domain.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drivers that needs acpi_device_fix_up_power(), allow them to be built as
modules by exporting this function.
Cc: <stable@vger.kernel.org> # 4.5+
Tested-by: Laszlo Fiat <laszlo.fiat@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-pci:
ACPI,PCI,IRQ: remove SCI penalize function
ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
ACPI,PCI,IRQ: reduce static IRQ array size to 16
ACPI,PCI,IRQ: reduce resource requirements
* acpi-misc:
ACPI / sysfs: fix error code in get_status()
ACPI / device_sysfs: Clean up checkpatch errors
ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO
ACPI / device_sysfs: Add sysfs support for _HRV hardware revision
arm64: defconfig: Enable ACPI
ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64
ACPI / ARM64: Don't enable ACPI by default on ARM64
acer-wmi: Use acpi_dev_found()
eeepc-wmi: Use acpi_dev_found()
ACPI / utils: Rename acpi_dev_present()
* acpi-tools:
tools/power/acpi: close file only if it is open
* acpica: (41 commits)
ACPICA: Update version to 20160422
ACPICA: Move all ASCII utilities to a common file
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read()
ACPICA: Executer: Introduce a set of macros to handle bit width mask generation
ACPICA: Hardware: Add optimized access bit width support
ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro
ACPICA: Renamed some #defined flag constants for clarity
ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors
ACPICA: ACPI 6.0: Update _BIX support for new package element
ACPICA: ACPI 6.1: Support for new PCCT subtable
ACPICA: Refactor evaluate_object to reduce nesting
ACPICA: Divergence: remove unwanted spaces for typedef
ACPICA: Update version to 20160318
ACPICA: Namespace: Reorder \_SB._INI to make sure it is evaluated before _REG evaluations
ACPICA: Events: Fix an issue that _REG association can happen before namespace is initialized
ACPICA: Tables: Fix wrong MLC condition for dynamic table loading
ACPICA: Interpreter: Fix wrong conditions for acpi_ev_install_region_handlers() invocation
ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness
Utilities: Fix missing parentheses in ACPI_GET_BITS()/ACPI_SET_BITS()
...
The Makefile/Kconfig currently controlling compilation of this code is:
Makefile:acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o
drivers/acpi/Kconfig:config ACPI_REDUCED_HARDWARE_ONLY
drivers/acpi/Kconfig: bool "Hardware-reduced ACPI support only" if EXPERT
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
code there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
The file wasn't explicitly including the module.h file but it did
already have init.h so, unlike similar changes, this one has no
header changes at all.
We also delete the MODULE_LICENSE tag since all that information
is already contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix for a recent regression in the intel_pstate driver causing
it to fail to restore the HWP (HW-managed P-states) configuration
of the boot CPU after suspend-to-RAM (Rafael Wysocki).
- Fix for two recent regressions in the intel_pstate driver, one
that can trigger a divide by zero if the driver is accessed via
sysfs before it manages to take the first sample and one causing
it to fail to update a structure field used in a trace point, so
the information coming from it is less useful (Rafael Wysocki).
- Fix for a problem in the sti-cpufreq driver introduced during
the 4.5 cycle that causes it to break CPU PM in multi-platform
kernels by registering cpufreq-dt (which subsequently doesn't
work) unconditionally and preventing the driver that would
actually work from registering (Sudeep Holla).
- Stable-candidate fix for an ARM64 cpuidle issue causing idle
state usage counters to be incorrectly updated for idle states
that were not entered due to errors (James Morse).
- Fix for a recently introduced issue in the OPP (Operating
Performance Points) framework causing it to print bogus error
messages for missing optional regulators (Viresh Kumar).
- Fix for a recently introduced issue in the generic device
properties framework that may cause it to attempt to dereferece
and invalid pointer in some cases (Heikki Krogerus).
- Fix for a deadlock in the ACPICA core that may be triggered
by device (eg. Thunderbolt) hotplug (Prarit Bhargava).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=pU+A
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Fixes for problems introduced or discovered recently (intel_pstate,
sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
generic device properties framework) and one fix for a hotplug-related
deadlock in ACPICA that's been there forever, but is nasty enough.
Specifics:
- Fix for a recent regression in the intel_pstate driver causing it
to fail to restore the HWP (HW-managed P-states) configuration of
the boot CPU after suspend-to-RAM (Rafael Wysocki).
- Fix for two recent regressions in the intel_pstate driver, one that
can trigger a divide by zero if the driver is accessed via sysfs
before it manages to take the first sample and one causing it to
fail to update a structure field used in a trace point, so the
information coming from it is less useful (Rafael Wysocki).
- Fix for a problem in the sti-cpufreq driver introduced during the
4.5 cycle that causes it to break CPU PM in multi-platform kernels
by registering cpufreq-dt (which subsequently doesn't work)
unconditionally and preventing the driver that would actually work
from registering (Sudeep Holla).
- Stable-candidate fix for an ARM64 cpuidle issue causing idle state
usage counters to be incorrectly updated for idle states that were
not entered due to errors (James Morse).
- Fix for a recently introduced issue in the OPP (Operating
Performance Points) framework causing it to print bogus error
messages for missing optional regulators (Viresh Kumar).
- Fix for a recently introduced issue in the generic device
properties framework that may cause it to attempt to dereferece and
invalid pointer in some cases (Heikki Krogerus).
- Fix for a deadlock in the ACPICA core that may be triggered by
device (eg Thunderbolt) hotplug (Prarit Bhargava)"
* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / OPP: Remove useless check
ACPICA: Dispatcher: Update thread ID for recursive method calls
intel_pstate: Fix intel_pstate_get()
cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
cpufreq: st: enable selective initialization based on the platform
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
device property: Avoid potential dereferences of invalid pointers
Module option to limit userspace to the publicly defined command set.
For cases where private DIMM commands may be interfering with the
kernel's handling of DIMM state this option can be set to block vendor
specific commands.
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs. We should be returning -EINVAL
here but we don't. It leads to an uninitalized variable in
counter_show():
drivers/acpi/sysfs.c:603 counter_show()
error: uninitialized symbol 'status'.
Fixes: 1c8fce27e2 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ba60e4500053010bf775d58f6f61febbdb94d817
New file is utascii.c
Link: https://github.com/acpica/acpica/commit/ba60e450
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 48eea5e7993ccb7189bd63cd726e02adafee6057
This patch adds access_width/bit_offset support in acpi_hw_write().
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/48eea5e7
Link: https://bugs.acpica.org/show_bug.cgi?id=1240
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 96ece052d4d073aae4f935f0ff0746646aea1174
ACPICA commit 3d8583a054e410f2ea4d73b48986facad9cfc0d4
This patch adds access_width/bit_offset support in acpi_hw_read().
This also enables GAS definition where bit_width is not a power of
two. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/96ece052
Link: https://github.com/acpica/acpica/commit/3d8583a0
Link: https://bugs.acpica.org/show_bug.cgi?id=1240
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c23034a3a09d5ed79f1827d51f43cfbccf68ab64
A regression was reported to the shift offset >= width of type.
This patch fixes this issue. BZ 1270.
This is a part of the fix because the order of the patches are modified for
Linux upstream, containing the cleanups for the old code. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/c23034a3
Link: https://bugs.acpica.org/show_bug.cgi?id=1270
Reported-by: Sascha Wildner <swildner@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c49a751b4dae7baec1790748a2b4b6e8ab599f51
For Access Size = 0, it actually can use user expected access bit width.
This patch implements this.
Besides of the ACPICA upstream commit, this patch also includes a fix fixing
the issue reported by the FreeBSD community.
The old register descriptors are translated in acpi_tb_init_generic_address()
with access_width being filled with 0. This breaks code in
acpi_hw_get_access_bit_width() when the registers are 16-bit IO ports and their
bit_width fields are filled with 16. The rapid fix is meant to make code
written for acpi_hw_get_access_bit_width() regression safer before the issue is
correctly fixed from acpi_tb_init_generic_address(). Reported by
John Baldwin <jhb@freebsd.org>, fixed by Lv Zheng <lv.zheng@intel.com>, tested
by Jung-uk Kim <jkim@freebsd.org>.
Link: https://github.com/acpica/acpica/commit/c49a751b
Reported-by: John Baldwin <jhb@freebsd.org>
Tested-by Jung-uk Kim <jkim@freebsd.org>.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 438905b205e64e742f9670a0970419c426264831
Expanded a couple of cryptic names.
Link: https://github.com/acpica/acpica/commit/438905b2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5a0555ece4ba9917e5842b21d88469ae06b4e815
Adds full support for:
i2c_serial_bus_v2
spi_serial_bus_v2
uart_serial_bus_v2
Compiler, Disassembler, Resource Manager, acpi_help.
Link: https://github.com/acpica/acpica/commit/5a0555ec
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3451e6d49d37919c13ec2c0019a31534b0dfc0c0
One integer was added at the end of the _BIX method, and the
version number was incremented.
Link: https://github.com/acpica/acpica/commit/3451e6d4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b2294cae776f5a66a7697414b21949d307e6856f
This patch removes unwanted spaces for typedef. This solution doesn't cover
function types.
Note that the linuxize result of this commit is very giant and should have
many conflicts against the current Linux upstream. Thus it is required to
modify the linuxize result of this commit and the commits around it
manually in order to have them merged to the Linux upstream. Since this is
very costy, we should do this only once, and if we can't ensure to do this
only once, we need to revert the Linux code to the wrong indentation result
before merging the linuxize result of this commit. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/b2294cae
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Removing the SCI penalize function as the penalty is now calculated on the
fly.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_irq_get_penalty is now calculating the penalty on the fly now.
No need to maintain global list of penalties or calculate them
at the init time. Removing duplicate code in acpi_irq_penalty_init.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the supported number of PCI IRQs are no longer capped
with 256, renaming the static array to support ISA IRQs only
and removing the MAX_IRQS constant.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Code has been redesigned to calculate penalty requirements on the fly. This
significantly simplifies the implementation and removes some of the init
calls from x86 architecture.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
_OSI handling code grows giant and it's time to move them into one file.
This patch collects all _OSI handling code into one single file.
So that we only have the following functions to be used externally:
early_acpi_osi_init(): Used by DMI detections;
acpi_osi_init(): Used to initialize OSI command line settings and install
Linux specific _OSI handler;
acpi_osi_setup(): The API that should be used by the external quirks.
acpi_osi_is_win8(): The API is used by the external drivers to determine
if BIOS supports Win8.
CONFIG_DMI is not useful as stub dmi_check_system() can make everything
stub because of strip.
No functional changes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch performs necessary cleanups before moving OSI support to
another file.
1. Change printk into pr_xxx
2. Do not initialize values to 0
3. Do not append additional "return" at the end of the function
4. Remove useless comments which may easily break line breaking rule
After fixing the coding style issues, rename functions to make them looking
like acpi_osi_xxx.
No functional changes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch changes "int/unsigned int" to "bool" to simplify the code.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following commit always reports positive value when Apple hardware
queries _OSI("Darwin"):
Commit: 7bc5a2bad0
Subject: ACPI: Support _OSI("Darwin") correctly
However since this implementation places the judgement in runtime, it
breaks acpi_osi=!Darwin and cannot return unsupported for _OSI("WinXXX")
invoked before invoking _OSI("Darwin").
This patch fixes the issues by reverting the wrong support and implementing
the default behavior of _OSI("Darwin")/_OSI("WinXXX") on Apple hardware via
DMI matching.
Fixes: 7bc5a2bad0 (ACPI: Support _OSI("Darwin") correctly)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=92111
Reported-and-tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch introduces acpi_osi=!! so that quirks may use it to revert
acpi_osi=!.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch cleans up OSI code in osl.c to make osi_linux work for OSI
strings other than "Linux", so it can be re-used for other purposes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The order of the _OSI related functionalities is as follows:
acpi_blacklisted()
acpi_dmi_osi_linux()
acpi_osi_setup()
acpi_osi_setup()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
parse_args()
__setup("acpi_osi=")
acpi_osi_setup_linux()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
acpi_early_init()
acpi_initialize_subsystem()
acpi_ut_initialize_interfaces()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
acpi_bus_init()
acpi_os_initialize1()
acpi_install_interface_handler(acpi_osi_handler)
acpi_osi_setup_late()
acpi_update_interfaces() for "!"
>>>>>>>>>>>>>>>>>>>>>>>>
acpi_osi_handler()
Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").
Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.
This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".
Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.
Fixes: 741d81280a (ACPI: Add facility to remove all _OSI strings)
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleaning up two existing checkpatch errors (and 2 warnings) in
device_sysfs.c since the file is being changed.
The change in acpi_device_setup_files() is changing spaces to a tab.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The error return from a sysfs show function is passed up through
the call chain and visible as the return from the read system call.
The show functions for the _STA and _SUN object currently return
-ENODEV. This patch changes the return to -EIO. ENODEV makes less
sense since the "device' exists or there wouldn't be a sysfs file.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI _HRV object on the device is used to supply Linux with the
device's hardware revision. This is an optional object. Add sysfs support
for the _HRV object if it exists on the device.
This change allows users to easily find the hardware version of non-PCI
hardware by looking at the sysfs 'hrv' file. It is most useful for
non-PCI devices because lspci can list the hardware version for PCI
devices.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_video_get_levels is useful for other drivers, i.e. the
to-be-added int3406 thermal driver, so export it.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we will need the backlight_device_get_by_type API, we can use it
instead of the backlight_device_registered API whenever necessary so
remove the backlight_device_registered API.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25
Set the mutex owner thread ID.
Original patch from: Prarit Bhargava <prarit@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When transportation of the command completes successfully, it indicates
that the 'status' result is valid. Fix the missed checking and
translation of the status field at the end of acpi_nfit_ctl().
Otherwise, we fail to handle reported errors and assume commands
complete successfully.
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Similar to pci-sysfs export the subsystem information available in the
NFIT. ACPI 6.1 clarifies that this data is copied as an array of bytes
from the DIMM SPD data.
Reported-by: Ryon Jensen <ryon.jensen@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds