Commit Graph

963 Commits

Author SHA1 Message Date
Frediano Ziglio 7cde9b27e7 xen: Fix possible user space selector corruption
Due to the way kernel is initialized under Xen is possible that the
ring1 selector used by the kernel for the boot cpu end up to be copied
to userspace leading to segmentation fault in the userspace.

Xen code in the kernel initialize no-boot cpus with correct selectors (ds
and es set to __USER_DS) but the boot one keep the ring1 (passed by Xen).
On task context switch (switch_to) we assume that ds, es and cs already
point to __USER_DS and __KERNEL_CSso these selector are not changed.

If processor is an Intel that support sysenter instruction sysenter/sysexit
is used so ds and es are not restored switching back from kernel to
userspace. In the case the selectors point to a ring1 instead of __USER_DS
the userspace code will crash on first memory access attempt (to be
precise Xen on the emulated iret used to do sysexit will detect and set ds
and es to zero which lead to GPF anyway).

Now if an userspace process call kernel using sysenter and get rescheduled
(for me it happen on a specific init calling wait4) could happen that the
ring1 selector is set to ds and es.

This is quite hard to detect cause after a while these selectors are fixed
(__USER_DS seems sticky).

Bisecting the code commit 7076aada10 appears
to be the first one that have this issue.

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
2013-10-10 14:39:37 +00:00
Linus Torvalds 4b97280675 Bug-fixes:
- Fix PV spinlocks triggering jump_label code bug
  - Remove extraneous code in the tpm front driver
  - Fix ballooning out of pages when non-preemptible
  - Fix deadlock when using a 32-bit initial domain with large amount of memory.
  - Add xen_nopvpsin parameter to the documentation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSQvzCAAoJEFjIrFwIi8fJyCIIAMENABapdLhrOiRdQ1Y7T5v1
 4bogPDLwpVxHzwo/vnHcNpl35/dUZrC6wQa51Bkoqq0V8o1XmjFy3SY/EBGjEAvw
 hh4qxGY0p0NNi6hKrWC8mH9u2TcluZGm1uecabkXUhl9mrAB5oBsfJdbBZ5N69gO
 QXXt0j7Xwv1APwH86T0e1Lz+lulhdw2ItXP4osYkEbRYNSaaGnuwsd0Jxcb4DeMk
 qhKgP7QMn3C7zDDaapJo1axeYQRBNEtv5M8+0wwMleX4yX1+IBRZeQTsRfMr7RB/
 8FhssWiH15xU6Gmzgi/VR8xhTEIbQh5GWsVReGf6pqIYSxGSYTvvyhm0bVRH4JI=
 =c+7u
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Bug-fixes and one update to the kernel-paramters.txt documentation.

   - Fix PV spinlocks triggering jump_label code bug
   - Remove extraneous code in the tpm front driver
   - Fix ballooning out of pages when non-preemptible
   - Fix deadlock when using a 32-bit initial domain with large amount
     of memory
   - Add xen_nopvpsin parameter to the documentation"

* tag 'stable/for-linus-3.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/spinlock: Document the xen_nopvspin parameter.
  xen/p2m: check MFN is in range before using the m2p table
  xen/balloon: don't alloc page while non-preemptible
  xen: Do not enable spinlocks before jump_label_init() has executed
  tpm: xen-tpmfront: Remove the locality sysfs attribute
  tpm: xen-tpmfront: Fix default durations
2013-09-25 15:50:53 -07:00
David Vrabel 0160676bba xen/p2m: check MFN is in range before using the m2p table
On hosts with more than 168 GB of memory, a 32-bit guest may attempt
to grant map an MFN that is error cannot lookup in its mapping of the
m2p table.  There is an m2p lookup as part of m2p_add_override() and
m2p_remove_override().  The lookup falls off the end of the mapped
portion of the m2p and (because the mapping is at the highest virtual
address) wraps around and the lookup causes a fault on what appears to
be a user space address.

do_page_fault() (thinking it's a fault to a userspace address), tries
to lock mm->mmap_sem.  If the gntdev device is used for the grant map,
m2p_add_override() is called from from gnttab_mmap() with mm->mmap_sem
already locked.  do_page_fault() then deadlocks.

The deadlock would most commonly occur when a 64-bit guest is started
and xenconsoled attempts to grant map its console ring.

Introduce mfn_to_pfn_no_overrides() which checks the MFN is within the
mapped portion of the m2p table before accessing the table and use
this in m2p_add_override(), m2p_remove_override(), and mfn_to_pfn()
(which already had the correct range check).

All faults caused by accessing the non-existant parts of the m2p are
thus within the kernel address space and exception_fixup() is called
without trying to lock mm->mmap_sem.

This means that for MFNs that are outside the mapped range of the m2p
then mfn_to_pfn() will always look in the m2p overrides.  This is
correct because it must be a foreign MFN (and the PFN in the m2p in
this case is only relevant for the other domain).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
--
v3: check for auto_translated_physmap in mfn_to_pfn_no_overrides()
v2: in mfn_to_pfn() look in m2p_overrides if the MFN is out of
    range as it's probably foreign.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-09-25 09:00:03 -04:00
Konrad Rzeszutek Wilk a945928ea2 xen: Do not enable spinlocks before jump_label_init() has executed
xen_init_spinlocks() currently calls static_key_slow_inc() before
jump_label_init() is invoked. When CONFIG_JUMP_LABEL is set (which usually is
the case) the effect of this static_key_slow_inc() is deferred until after
jump_label_init(). This is different from when CONFIG_JUMP_LABEL is not set, in
which case the key is set immediately. Thus, depending on the value of config
option, we may observe different behavior.

In addition, when we come to __jump_label_transform() from jump_label_init(),
the key (paravirt_ticketlocks_enabled) is already enabled. On processors where
ideal_nop is not the same as default_nop this will cause a BUG() since it is
expected that before a key is enabled the latter is replaced by the former
during initialization.

To address this problem we need to move
static_key_slow_inc(&paravirt_ticketlocks_enabled) so that it is called
after jump_label_init(). We also need to make sure that this is done before
other cpus start to boot. early_initcall appears to be  a good place to do so.
(Note that we cannot move whole xen_init_spinlocks() there since pv_lock_ops
need to be set before alternative_instructions() runs.)

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Added extra comments in the code]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
2013-09-24 16:22:26 -04:00
Linus Torvalds a60d4b9874 Bug-fixes:
- Boot on ARM without using Xen unconditionally
  - On Xen ARM don't run cpuidle/cpufreq
  - Fix regression in balloon driver, preempt count warnings
  - Fixes to make PVHVM able to use pv ticketlock.
  - Revert Xen PVHVM disabling pv ticketlock (aka, re-enable pv ticketlocks)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSLhcPAAoJEFjIrFwIi8fJGq8IAIxI9zcnY9N6eaD3DepdZlz9
 AMT8/k7afau1rDMk5r3HaUjAkdeEvCgeWw8W6tJ+OK19AmFTVEvoO803MSzYkDol
 6XoknSoU9UnE+/w4FF1FttWmRxkZ8Op/hcs9435q7o+L0zlk9CbbkxFlzUKf5yVD
 KfvQED4D/ShmPj2f+jYLCtsIi1m/AJ36BsfaUtJo3QVKvJIFFbT6F1AJ4tlbmvC0
 FOaHYl9cTlPXfrpwviIP0+W8RVmcWreLqSOKsdHuWzB//MSvZDVmLGc7JPorblfe
 cuME/tF/Y5bnxHKp8Es2MczpdvS6yp/HNoe0g6AdLVPL7dvGPqKpf2uZZNXUawQ=
 =qpSg
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 "This pull I usually do after rc1 is out but because we have a nice
  amount of fixes, some bootup related fixes for ARM, and it is early in
  the cycle we figured to do it now to help with tracking of potential
  regressions.

  The simple ones are the ARM ones - one of the patches fell through the
  cracks, other fixes a bootup issue (unconditionally using Xen
  functions).  Then a fix for a regression causing preempt count being
  off (patch causing this went in v3.12).

  Lastly are the fixes to make Xen PVHVM guests use PV ticketlocks (Xen
  PV already does).

  The enablement of that was supposed to be part of the x86 spinlock
  merge in commit 816434ec4a ("The biggest change here are
  paravirtualized ticket spinlocks (PV spinlocks), which bring a nice
  speedup on various benchmarks...") but unfortunatly it would cause
  hang when booting Xen PVHVM guests.  Yours truly got all of the bugs
  fixed last week and they (six of them) are included in this pull.

  Bug-fixes:
   - Boot on ARM without using Xen unconditionally
   - On Xen ARM don't run cpuidle/cpufreq
   - Fix regression in balloon driver, preempt count warnings
   - Fixes to make PVHVM able to use pv ticketlock.
   - Revert Xen PVHVM disabling pv ticketlock (aka, re-enable pv ticketlocks)"

* tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/spinlock: Don't use __initdate for xen_pv_spin
  Revert "xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM"
  xen/spinlock: Don't setup xen spinlock IPI kicker if disabled.
  xen/smp: Update pv_lock_ops functions before alternative code starts under PVHVM
  xen/spinlock: We don't need the old structure anymore
  xen/spinlock: Fix locking path engaging too soon under PVHVM.
  xen/arm: disable cpuidle and cpufreq when linux is running as dom0
  xen/p2m: Don't call get_balloon_scratch_page() twice, keep interrupts disabled for multicalls
  ARM: xen: only set pm function ptrs for Xen guests
2013-09-10 20:07:04 -07:00
Konrad Rzeszutek Wilk c3b7cb1fd8 xen/spinlock: Don't use __initdate for xen_pv_spin
As we get compile warnings about .init.data being
used by non-init functions.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09 13:08:49 -04:00
Konrad Rzeszutek Wilk fb78e58c27 Revert "xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM"
This reverts commit 70dd4998cb.

Now that the bugs have been resolved we can re-enable the
PV ticketlock implementation under PVHVM Xen guests.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-09-09 12:06:45 -04:00
Konrad Rzeszutek Wilk 3310bbedac xen/spinlock: Don't setup xen spinlock IPI kicker if disabled.
There is no need to setup this kicker IPI if we are never going
to use the paravirtualized ticketlock mechanism.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-09-09 12:06:38 -04:00
Konrad Rzeszutek Wilk 26a7999527 xen/smp: Update pv_lock_ops functions before alternative code starts under PVHVM
Before this patch we would patch all of the pv_lock_ops sites
using alternative assembler. Then later in the bootup cycle
change the unlock_kick and lock_spinning to the Xen specific -
without re patching.

That meant that for the core of the kernel we would be running
with the baremetal version of unlock_kick and lock_spinning while
for modules we would have the proper Xen specific slowpaths.

As most of the module uses some API from the core kernel that ended
up with slowpath lockers waiting forever to be kicked (b/c they
would be using the Xen specific slowpath logic). And the
kick never came b/c the unlock path that was taken was the
baremetal one.

On PV we do not have the problem as we initialise before the
alternative code kicks in.

The fix is to make the updating of the pv_lock_ops function
be done before the alternative code starts patching.

Note that this patch fixes issues discovered by commit
f10cd522c5.
("xen: disable PV spinlocks on HVM") wherein it mentioned

   PV spinlocks cannot possibly work with the current code because they are
   enabled after pvops patching has already been done, and because PV
   spinlocks use a different data structure than native spinlocks so we
   cannot switch between them dynamically.

The first problem is solved by this patch.

The second problem has been solved by commit
816434ec4a
(Merge branch 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip)

P.S.
There is still the commit 70dd4998cb
(xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM) to
revert but that can be done later after all other bugs have been
fixed.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-09-09 12:06:31 -04:00
Konrad Rzeszutek Wilk 6055aaf87d xen/spinlock: We don't need the old structure anymore
As we are using the generic ticketlock structs and these
old structures are not needed anymore.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-09-09 12:06:24 -04:00
Konrad Rzeszutek Wilk 1fb3a8b2cf xen/spinlock: Fix locking path engaging too soon under PVHVM.
The xen_lock_spinning has a check for the kicker interrupts
and if it is not initialized it will spin normally (not enter
the slowpath).

But for PVHVM case we would initialize the kicker interrupt
before the CPU came online. This meant that if the booting
CPU used a spinlock and went in the slowpath - it would
enter the slowpath and block forever. The forever part because
during bootup: the spinlock would be taken _before_ the CPU
sets itself to be online (more on this further), and we enter
to poll on the event channel forever.

The bootup CPU (see commit fc78d343fa
"xen/smp: initialize IPI vectors before marking CPU online"
for details) and the CPU that started the bootup consult
the cpu_online_mask to determine whether the booting CPU should
get an IPI. The booting CPU has to set itself in this mask via:

  set_cpu_online(smp_processor_id(), true);

However, if the spinlock is taken before this (and it is) and
it polls on an event channel - it will never be woken up as
the kernel will never send an IPI to an offline CPU.

Note that the PVHVM logic in sending IPIs is using the HVM
path which has numerous checks using the cpu_online_mask
and cpu_active_mask. See above mention git commit for details.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-09-09 12:06:16 -04:00
Konrad Rzeszutek Wilk 65320fceda Linux 3.11-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJSGqS5AAoJEHm+PkMAQRiGFxEH/3VrqF6WAkcviNiW/0DCdO8k
 v6Wi7Sp5LxVkwzmOCHCV1tTHwLRlH3cB9YmJlGQ0kHCREaAuEQAB0xJXIW7dnyYj
 Qq7KoRZEMe3wizmjEsj8qsrhfMLzHjBw67hBz2znwW/4P7YdgzwD7KRiEat+yRC9
 ON3nNL2zIqpfk92RXvVrSVl4KMEM+WNbOfiffgBiEP24Ja1MJMFH1d4i6hNOaB0x
 9Pb3Lw8let92x+8Ao5jnjKdKMgVsoZWbN/TgQR8zZOHM38AGGiDgk18vMz+L+hpS
 jqfjckxj1m30jGq0qZ9ZbMZx3IGif4KccVr30MqNHJpwi6Q24qXvT3YfA3HkstM=
 =nAab
 -----END PGP SIGNATURE-----

Merge tag 'v3.11-rc7' into stable/for-linus-3.12

Linux 3.11-rc7

As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e
Author: Chuck Anderson <chuck.anderson@oracle.com>
Date:   Tue Aug 6 15:12:19 2013 -0700

    xen/smp: initialize IPI vectors before marking CPU online

* tag 'v3.11-rc7': (443 commits)
  Linux 3.11-rc7
  ARC: [lib] strchr breakage in Big-endian configuration
  VFS: collect_mounts() should return an ERR_PTR
  bfs: iget_locked() doesn't return an ERR_PTR
  efs: iget_locked() doesn't return an ERR_PTR()
  proc: kill the extra proc_readfd_common()->dir_emit_dots()
  cope with potentially long ->d_dname() output for shmem/hugetlb
  usb: phy: fix build breakage
  USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
  staging: comedi: bug-fix NULL pointer dereference on failed attach
  lib/lz4: correct the LZ4 license
  memcg: get rid of swapaccount leftovers
  nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
  nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
  drivers/platform/olpc/olpc-ec.c: initialise earlier
  ipv4: expose IPV4_DEVCONF
  ipv6: handle Redirect ICMP Message with no Redirected Header option
  be2net: fix disabling TX in be_close()
  Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
  Revert "genetlink: fix family dump race"
  ...

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09 12:05:37 -04:00
Konrad Rzeszutek Wilk c3f31f6a6f Merge branch 'x86/spinlocks' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into stable/for-linus-3.12
* 'x86/spinlocks' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kvm/guest: Fix sparse warning: "symbol 'klock_waiting' was not declared as static"
  kvm: Paravirtual ticketlocks support for linux guests running on KVM hypervisor
  kvm guest: Add configuration support to enable debug information for KVM Guests
  kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi
  xen, pvticketlock: Allow interrupts to be enabled while blocking
  x86, ticketlock: Add slowpath logic
  jump_label: Split jumplabel ratelimit
  x86, pvticketlock: When paravirtualizing ticket locks, increment by 2
  x86, pvticketlock: Use callee-save for lock_spinning
  xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
  xen, pvticketlock: Xen implementation for PV ticket locks
  xen: Defer spinlock setup until boot CPU setup
  x86, ticketlock: Collapse a layer of functions
  x86, ticketlock: Don't inline _spin_unlock when using paravirt spinlocks
  x86, spinlock: Replace pv spinlocks with pv ticketlocks
2013-09-09 12:01:15 -04:00
Boris Ostrovsky d7f8f48d1e xen/p2m: Don't call get_balloon_scratch_page() twice, keep interrupts disabled for multicalls
m2p_remove_override() calls get_balloon_scratch_page() in
MULTI_update_va_mapping() even though it already has pointer to this page from
the earlier call (in scratch_page). This second call doesn't have a matching
put_balloon_scratch_page() thus not restoring preempt count back. (Also, there
is no put_balloon_scratch_page() in the error path.)

In addition, the second multicall uses __xen_mc_entry() which does not disable
interrupts. Rearrange xen_mc_* calls to keep interrupts off while performing
multicalls.

This commit fixes a regression introduced by:

commit ee0726407f
Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date:   Tue Jul 23 17:23:54 2013 +0000

    xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-09-09 10:50:52 +00:00
Linus Torvalds cf39c8e535 Features:
- Xen Trusted Platform Module (TPM) frontend driver - with the backend in MiniOS.
  - Scalability improvements in event channel.
  - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy)
 Bug-fixes:
  - Make the 1:1 mapping work during early bootup on selective regions.
  - Add scratch page to balloon driver to deal with unexpected code still holding
    on stale pages.
  - Allow NMIs on PV guests (64-bit only)
  - Remove unnecessary TLB flush in M2P code.
  - Fixes duplicate callbacks in Xen granttable code.
  - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries
  - Fix for events being lost due to rescheduling on different VCPUs.
  - More documentation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSJgGgAAoJEFjIrFwIi8fJ4asH+gKp0aauPEdHtmn7rLfZUUJ5
 uuvWBiXiVVYMFz81NXlZ1WoAMuDuVA45Eu785uPRb9oUHDi0W8LO4Dqr+9lJTrXJ
 KiMvTXmOLSfSdjRlDI4jCoxBdg8tpbT3oJkXsFcHnrd5d4oTFGb0uuo5nFYPDicZ
 BGogDclzcqtlYl/2LUb+6vUXUQd77n0oW7RQ4yAaw3Qdj381om3Dmoeat8QU9Kdo
 Q4dhsHS6YAGR5R+G0zPfVOoKvSGoGV0NUdXr19QpYArGxKXcmiPjrgAJ/NGLsxvm
 8AbPjmQzOFJmUclHiiej6kvBsh2ZTYAesJMSAFLWD7EndXii7zljyJv0PIJ//uQ=
 =hNDW
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen updates from Konrad Rzeszutek Wilk:
 "A couple of features and a ton of bug-fixes.  There is also some
  maintership changes.  Jeremy is enjoying the full-time work at the
  startup and as much as he would love to help - he can't find the time.
  I have a bunch of other things that I promised to work on - paravirt
  diet, get SWIOTLB working everywhere, etc, but haven't been able to
  find the time.

  As such both David Vrabel and Boris Ostrovsky have graciously
  volunteered to help with the maintership role.  They will keep the lid
  on regressions, bug-fixes, etc.  I will be in the background to help -
  but eventually there will be less of me doing the Xen GIT pulls and
  more of them.  Stefano is still doing the ARM/ARM64 and will continue
  on doing so.

  Features:
   - Xen Trusted Platform Module (TPM) frontend driver - with the
     backend in MiniOS.
   - Scalability improvements in event channel.
   - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy)

  Bug-fixes:
   - Make the 1:1 mapping work during early bootup on selective regions.
   - Add scratch page to balloon driver to deal with unexpected code
     still holding on stale pages.
   - Allow NMIs on PV guests (64-bit only)
   - Remove unnecessary TLB flush in M2P code.
   - Fixes duplicate callbacks in Xen granttable code.
   - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries
   - Fix for events being lost due to rescheduling on different VCPUs.
   - More documentation"

* tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (23 commits)
  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
  drivers/xen-tpmfront: Fix compile issue with missing option.
  xen/balloon: don't set P2M entry for auto translated guest
  xen/evtchn: double free on error
  Xen: Fix retry calls into PRIVCMD_MMAPBATCH*.
  xen/pvhvm: Initialize xen panic handler for PVHVM guests
  xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping
  xen: fix ARM build after 6efa20e4
  MAINTAINERS: Remove Jeremy from the Xen subsystem.
  xen/events: document behaviour when scanning the start word for events
  x86/xen: during early setup, only 1:1 map the ISA region
  x86/xen: disable premption when enabling local irqs
  swiotlb-xen: replace dma_length with sg_dma_len() macro
  swiotlb: replace dma_length with sg_dma_len() macro
  xen/balloon: set a mapping for ballooned out pages
  xen/evtchn: improve scalability by using per-user locks
  xen/p2m: avoid unneccesary TLB flush in m2p_remove_override()
  MAINTAINERS: Add in two extra co-maintainers of the Xen tree.
  MAINTAINERS: Update the Xen subsystem's with proper mailing list.
  xen: replace strict_strtoul() with kstrtoul()
  ...
2013-09-04 17:45:39 -07:00
Linus Torvalds 816434ec4a Merge branch 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 spinlock changes from Ingo Molnar:
 "The biggest change here are paravirtualized ticket spinlocks (PV
  spinlocks), which bring a nice speedup on various benchmarks.

  The KVM host side will come to you via the KVM tree"

* 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kvm/guest: Fix sparse warning: "symbol 'klock_waiting' was not declared as static"
  kvm: Paravirtual ticketlocks support for linux guests running on KVM hypervisor
  kvm guest: Add configuration support to enable debug information for KVM Guests
  kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi
  xen, pvticketlock: Allow interrupts to be enabled while blocking
  x86, ticketlock: Add slowpath logic
  jump_label: Split jumplabel ratelimit
  x86, pvticketlock: When paravirtualizing ticket locks, increment by 2
  x86, pvticketlock: Use callee-save for lock_spinning
  xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
  xen, pvticketlock: Xen implementation for PV ticket locks
  xen: Defer spinlock setup until boot CPU setup
  x86, ticketlock: Collapse a layer of functions
  x86, ticketlock: Don't inline _spin_unlock when using paravirt spinlocks
  x86, spinlock: Replace pv spinlocks with pv ticketlocks
2013-09-04 11:55:10 -07:00
Linus Torvalds 05eebfb26b Merge branch 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt changes from Ingo Molnar:
 "Hypervisor signature detection cleanup and fixes - the goal is to make
  KVM guests run better on MS/Hyperv and to generalize and factor out
  the code a bit"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Correctly detect hypervisor
  x86, kvm: Switch to use hypervisor_cpuid_base()
  xen: Switch to use hypervisor_cpuid_base()
  x86: Introduce hypervisor_cpuid_base()
2013-09-04 11:05:13 -07:00
Linus Torvalds 2a475501b8 Merge branch 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/asmlinkage changes from Ingo Molnar:
 "As a preparation for Andi Kleen's LTO patchset (link time
  optimizations using GCC's -flto which build time optimization has
  steadily increased in quality over the past few years and might
  eventually be usable for the kernel too) this tree includes a handful
  of preparatory patches that make function calling convention
  annotations consistent again:

   - Mark every function without arguments (or 64bit only) that is used
     by assembly code with asmlinkage()

   - Mark every function with parameters or variables that is used by
     assembly code as __visible.

  For the vanilla kernel this has documentation, consistency and
  debuggability advantages, for the time being"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asmlinkage: Fix warning in xen asmlinkage change
  x86, asmlinkage, vdso: Mark vdso variables __visible
  x86, asmlinkage, power: Make various symbols used by the suspend asm code visible
  x86, asmlinkage: Make dump_stack visible
  x86, asmlinkage: Make 64bit checksum functions visible
  x86, asmlinkage, paravirt: Add __visible/asmlinkage to xen paravirt ops
  x86, asmlinkage, apm: Make APM data structure used from assembler visible
  x86, asmlinkage: Make syscall tables visible
  x86, asmlinkage: Make several variables used from assembler/linker script visible
  x86, asmlinkage: Make kprobes code visible and fix assembler code
  x86, asmlinkage: Make various syscalls asmlinkage
  x86, asmlinkage: Make 32bit/64bit __switch_to visible
  x86, asmlinkage: Make _*_start_kernel visible
  x86, asmlinkage: Make all interrupt handlers asmlinkage / __visible
  x86, asmlinkage: Change dotraplinkage into __visible on 32bit
  x86: Fix sys_call_table type in asm/syscall.h
2013-09-04 08:42:44 -07:00
Andi Kleen eb86b5fd50 x86/asmlinkage: Fix warning in xen asmlinkage change
Current code uses asmlinkage for functions without arguments.
This adds an implicit regparm(0) which creates a warning
when assigning the function to pointers.

Use __visible for the functions without arguments.
This avoids having to add regparm(0) to function pointers.
Since they have no arguments it does not make any difference.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1377115662-4865-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-22 09:17:19 +02:00
Linus Torvalds d936d2d452 Bug-fixes:
- On ARM did not have balanced calls to get/put_cpu.
  - Fix to make tboot + Xen + Linux correctly.
  - Fix events VCPU binding issues.
  - Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSFMaJAAoJEFjIrFwIi8fJ+/0H/32rLj60FpKXcPDCvID+9p8T
 XDGnFNttsxyhuzEzetOAd0aLKYKGnUaTDZBHfgSNipGCxjMLYgz84phRmHAYEj8u
 kai1Ag1WjhZilCmImzFvdHFiUwtvKwkeBIL/cZtKr1BetpnuuFsoVnwbH9FVjMpr
 TCg6sUwFq7xRyD1azo/cTLZFeiUqq0aQLw8J72YaapdS3SztHPeDHXlPpmLUdb6+
 hiSYveJMYp2V0SW8g8eLKDJxVr2QdPEfl9WpBzpLlLK8GrNw8BEU6hSOSLzxB7z/
 hDATAuZ5iHiIEi1uGfVjOyDws2ngUhmBKUH5x5iVIZd2P5c/ffLh2ePDVWGO5RI=
 =yMuS
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - On ARM did not have balanced calls to get/put_cpu.
 - Fix to make tboot + Xen + Linux correctly.
 - Fix events VCPU binding issues.
 - Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.

* tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/smp: initialize IPI vectors before marking CPU online
  xen/events: mask events when changing their VCPU binding
  xen/events: initialize local per-cpu mask for all possible events
  x86/xen: do not identity map UNUSABLE regions in the machine E820
  xen/arm: missing put_cpu in xen_percpu_init
2013-08-21 16:38:33 -07:00
Vaughan Cao 669b0ae961 xen/pvhvm: Initialize xen panic handler for PVHVM guests
kernel use callback linked in panic_notifier_list to notice others when panic
happens.
NORET_TYPE void panic(const char * fmt, ...){
    ...
    atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
}
When Xen becomes aware of this, it will call xen_reboot(SHUTDOWN_crash) to
send out an event with reason code - SHUTDOWN_crash.

xen_panic_handler_init() is defined to register on panic_notifier_list but
we only call it in xen_arch_setup which only be called by PV, this patch is
necessary for PVHVM.

Without this patch, setting 'on_crash=coredump-restart' in PVHVM guest config
file won't lead a vmcore to be generate when the guest panics. It can be
reproduced with 'echo c > /proc/sysrq-trigger'.

Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Joe Jin <joe.jin@oracle.com>
2013-08-20 15:37:03 -04:00
Stefano Stabellini ee0726407f xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping
GNTTABOP_unmap_grant_ref unmaps a grant and replaces it with a 0
mapping instead of reinstating the original mapping.
Doing so separately would be racy.

To unmap a grant and reinstate the original mapping atomically we use
GNTTABOP_unmap_and_replace.
GNTTABOP_unmap_and_replace doesn't work with GNTMAP_contains_pte, so
don't use it for kmaps.  GNTTABOP_unmap_and_replace zeroes the mapping
passed in new_addr so we have to reinstate it, however that is a
per-cpu mapping only used for balloon scratch pages, so we can be sure that
it's not going to be accessed while the mapping is not valid.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: alex@alex.org.uk
CC: dcrisan@flexiant.com

[v1: Konrad fixed up the conflicts]
Conflicts:
	arch/x86/xen/p2m.c
2013-08-20 10:25:35 -04:00
Chuck Anderson fc78d343fa xen/smp: initialize IPI vectors before marking CPU online
An older PVHVM guest (v3.0 based) crashed during vCPU hot-plug with:

	kernel BUG at drivers/xen/events.c:1328!

RCU has detected that a CPU has not entered a quiescent state within the
grace period.  It needs to send the CPU a reschedule IPI if it is not
offline.  rcu_implicit_offline_qs() does this check:

	/*
	 * If the CPU is offline, it is in a quiescent state.  We can
	 * trust its state not to change because interrupts are disabled.
	 */
	if (cpu_is_offline(rdp->cpu)) {
		rdp->offline_fqs++;
		return 1;
	}

	Else the CPU is online.  Send it a reschedule IPI.

The CPU is in the middle of being hot-plugged and has been marked online
(!cpu_is_offline()).  See start_secondary():

	set_cpu_online(smp_processor_id(), true);
	...
	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;

start_secondary() then waits for the CPU bringing up the hot-plugged CPU to
mark it as active:

	/*
	 * Wait until the cpu which brought this one up marked it
	 * online before enabling interrupts. If we don't do that then
	 * we can end up waking up the softirq thread before this cpu
	 * reached the active state, which makes the scheduler unhappy
	 * and schedule the softirq thread on the wrong cpu. This is
	 * only observable with forced threaded interrupts, but in
	 * theory it could also happen w/o them. It's just way harder
	 * to achieve.
	 */
	while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
		cpu_relax();

	/* enable local interrupts */
	local_irq_enable();

The CPU being hot-plugged will be marked active after it has been fully
initialized by the CPU managing the hot-plug.  In the Xen PVHVM case
xen_smp_intr_init() is called to set up the hot-plugged vCPU's
XEN_RESCHEDULE_VECTOR.

The hot-plugging CPU is marked online, not marked active and does not have
its IPI vectors set up.  rcu_implicit_offline_qs() sees the hot-plugging
cpu is !cpu_is_offline() and tries to send it a reschedule IPI:
This will lead to:

	kernel BUG at drivers/xen/events.c:1328!

	xen_send_IPI_one()
	xen_smp_send_reschedule()
	rcu_implicit_offline_qs()
	rcu_implicit_dynticks_qs()
	force_qs_rnp()
	force_quiescent_state()
	__rcu_process_callbacks()
	rcu_process_callbacks()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()

because xen_send_IPI_one() will attempt to use an uninitialized IRQ for
the XEN_RESCHEDULE_VECTOR.

There is at least one other place that has caused the same crash:

	xen_smp_send_reschedule()
	wake_up_idle_cpu()
	add_timer_on()
	clocksource_watchdog()
	call_timer_fn()
	run_timer_softirq()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()
	xen_hvm_callback_vector()

clocksource_watchdog() uses cpu_online_mask to pick the next CPU to handle
a watchdog timer:

	/*
	 * Cycle through CPUs to check if the CPUs stay synchronized
	 * to each other.
	 */
	next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
	if (next_cpu >= nr_cpu_ids)
		next_cpu = cpumask_first(cpu_online_mask);
	watchdog_timer.expires += WATCHDOG_INTERVAL;
	add_timer_on(&watchdog_timer, next_cpu);

This resulted in an attempt to send an IPI to a hot-plugging CPU that
had not initialized its reschedule vector. One option would be to make
the RCU code check to not check for CPU offline but for CPU active.
As becoming active is done after a CPU is online (in older kernels).

But Srivatsa pointed out that "the cpu_active vs cpu_online ordering has been
completely reworked - in the online path, cpu_active is set *before* cpu_online,
and also, in the cpu offline path, the cpu_active bit is reset in the CPU_DYING
notification instead of CPU_DOWN_PREPARE." Drilling in this the bring-up
path: "[brought up CPU].. send out a CPU_STARTING notification, and in response
to that, the scheduler sets the CPU in the cpu_active_mask. Again, this mask
is better left to the scheduler alone, since it has the intelligence to use it
judiciously."

The conclusion was that:
"
1. At the IPI sender side:

   It is incorrect to send an IPI to an offline CPU (cpu not present in
   the cpu_online_mask). There are numerous places where we check this
   and warn/complain.

2. At the IPI receiver side:

   It is incorrect to let the world know of our presence (by setting
   ourselves in global bitmasks) until our initialization steps are complete
   to such an extent that we can handle the consequences (such as
   receiving interrupts without crashing the sender etc.)
" (from Srivatsa)

As the native code enables the interrupts at some point we need to be
able to service them. In other words a CPU must have valid IPI vectors
if it has been marked online.

It doesn't need to handle the IPI (interrupts may be disabled) but needs
to have valid IPI vectors because another CPU may find it in cpu_online_mask
and attempt to send it an IPI.

This patch will change the order of the Xen vCPU bring-up functions so that
Xen vectors have been set up before start_secondary() is called.
It also will not continue to bring up a Xen vCPU if xen_smp_intr_init() fails
to initialize it.

Orabug 13823853
Signed-off-by Chuck Anderson <chuck.anderson@oracle.com>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-20 10:13:05 -04:00
David Vrabel e201bfcc5c x86/xen: during early setup, only 1:1 map the ISA region
During early setup, when the reserved regions and MMIO holes are being
setup as 1:1 in the p2m, clear any mappings instead of making them 1:1
(execept for the ISA region which is expected to be mapped).

This fixes a regression introduced in 3.5 by 83d51ab473 (xen/setup:
update VA mapping when releasing memory during setup) which caused
hosts with tboot to fail to boot.

tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.

(XEN)  0000000000000000 - 0000000000060000 (usable)
(XEN)  0000000000060000 - 0000000000068000 (reserved)
(XEN)  0000000000068000 - 000000000009e000 (usable)
(XEN)  0000000000100000 - 0000000000800000 (usable)
(XEN)  0000000000800000 - 0000000000972000 (unusable)

tboot marked this region as unusable.

(XEN)  0000000000972000 - 00000000cf200000 (usable)
(XEN)  00000000cf200000 - 00000000cf38f000 (reserved)
(XEN)  00000000cf38f000 - 00000000cf3ce000 (ACPI data)
(XEN)  00000000cf3ce000 - 00000000d0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fe000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000630000000 (usable)

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-20 10:12:29 -04:00
David Vrabel fb58e30091 x86/xen: disable premption when enabling local irqs
If CONFIG_PREEMPT is enabled then xen_enable_irq() (and
xen_restore_fl()) could be preempted and rescheduled on a different
VCPU in between the clear of the mask and the check for pending
events.  This may result in events being lost as the upcall will check
for pending events on the wrong VCPU.

Fix this by disabling preemption around the unmask and check for
events.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-20 10:02:03 -04:00
David Vrabel 3bc38cbceb x86/xen: do not identity map UNUSABLE regions in the machine E820
If there are UNUSABLE regions in the machine memory map, dom0 will
attempt to map them 1:1 which is not permitted by Xen and the kernel
will crash.

There isn't anything interesting in the UNUSABLE region that the dom0
kernel needs access to so we can avoid making the 1:1 mapping and
treat it as RAM.

We only do this for dom0, as that is where tboot case shows up.
A PV domU could have an UNUSABLE region in its pseudo-physical map
and would need to be handled in another patch.

This fixes a boot failure on hosts with tboot.

tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.

  (XEN)  0000000000000000 - 0000000000060000 (usable)
  (XEN)  0000000000060000 - 0000000000068000 (reserved)
  (XEN)  0000000000068000 - 000000000009e000 (usable)
  (XEN)  0000000000100000 - 0000000000800000 (usable)
  (XEN)  0000000000800000 - 0000000000972000 (unusable)

tboot marked this region as unusable.

  (XEN)  0000000000972000 - 00000000cf200000 (usable)
  (XEN)  00000000cf200000 - 00000000cf38f000 (reserved)
  (XEN)  00000000cf38f000 - 00000000cf3ce000 (ACPI data)
  (XEN)  00000000cf3ce000 - 00000000d0000000 (reserved)
  (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
  (XEN)  00000000fe000000 - 0000000100000000 (reserved)
  (XEN)  0000000100000000 - 0000000630000000 (usable)

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Altered the patch and description with domU's with UNUSABLE regions]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-20 09:46:06 -04:00
David Vrabel 65a45fa2f6 xen/p2m: avoid unneccesary TLB flush in m2p_remove_override()
In m2p_remove_override() when removing the grant map from the kernel
mapping and replacing with a mapping to the original page, the grant
unmap will already have flushed the TLB and it is not necessary to do
it again after updating the mapping.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-08-09 11:06:44 -04:00
Konrad Rzeszutek Wilk 6efa20e49b xen: Support 64-bit PV guest receiving NMIs
This is based on a patch that Zhenzhong Duan had sent - which
was missing some of the remaining pieces. The kernel has the
logic to handle Xen-type-exceptions using the paravirt interface
in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME -
pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN -
pv_cpu_ops.iret).

That means the nmi handler (and other exception handlers) use
the hypervisor iret.

The other changes that would be neccessary for this would
be to translate the NMI_VECTOR to one of the entries on the
ipi_vector and make xen_send_IPI_mask_allbutself use different
events.

Fortunately for us commit 1db01b4903
(xen: Clean up apic ipi interface) implemented this and we piggyback
on the cleanup such that the apic IPI interface will pass the right
vector value for NMI.

With this patch we can trigger NMIs within a PV guest (only tested
x86_64).

For this to work with normal PV guests (not initial domain)
we need the domain to be able to use the APIC ops - they are
already implemented to use the Xen event channels. For that
to be turned on in a PV domU we need to remove the masking
of X86_FEATURE_APIC.

Incidentally that means kgdb will also now work within
a PV guest without using the 'nokgdbroundup' workaround.

Note that the 32-bit version is different and this patch
does not enable that.

CC: Lisa Nguyen <lisa@xenapiadmin.com>
CC: Ben Guthro <benjamin.guthro@citrix.com>
CC: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Fixed up per David Vrabel comments]
Reviewed-by: Ben Guthro <benjamin.guthro@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-08-09 10:55:47 -04:00
Jeremy Fitzhardinge 1ed7bf5f52 xen, pvticketlock: Allow interrupts to be enabled while blocking
If interrupts were enabled when taking the spinlock, we can leave them
enabled while blocking to get the lock.

If we can enable interrupts while waiting for the lock to become
available, and we take an interrupt before entering the poll,
and the handler takes a spinlock which ends up going into
the slow state (invalidating the per-cpu "lock" and "want" values),
then when the interrupt handler returns the event channel will
remain pending so the poll will return immediately, causing it to
return out to the main spinlock loop.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-12-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:54:03 -07:00
Jeremy Fitzhardinge 96f853eaa8 x86, ticketlock: Add slowpath logic
Maintain a flag in the LSB of the ticket lock tail which indicates
whether anyone is in the lock slowpath and may need kicking when
the current holder unlocks.  The flags are set when the first locker
enters the slowpath, and cleared when unlocking to an empty queue (ie,
no contention).

In the specific implementation of lock_spinning(), make sure to set
the slowpath flags on the lock just before blocking.  We must do
this before the last-chance pickup test to prevent a deadlock
with the unlocker:

Unlocker			Locker
				test for lock pickup
					-> fail
unlock
test slowpath
	-> false
				set slowpath flags
				block

Whereas this works in any ordering:

Unlocker			Locker
				set slowpath flags
				test for lock pickup
					-> fail
				block
unlock
test slowpath
	-> true, kick

If the unlocker finds that the lock has the slowpath flag set but it is
actually uncontended (ie, head == tail, so nobody is waiting), then it
clears the slowpath flag.

The unlock code uses a locked add to update the head counter.  This also
acts as a full memory barrier so that its safe to subsequently
read back the slowflag state, knowing that the updated lock is visible
to the other CPUs.  If it were an unlocked add, then the flag read may
just be forwarded from the store buffer before it was visible to the other
CPUs, which could result in a deadlock.

Unfortunately this means we need to do a locked instruction when
unlocking with PV ticketlocks.  However, if PV ticketlocks are not
enabled, then the old non-locked "add" is the only unlocking code.

Note: this code relies on gcc making sure that unlikely() code is out of
line of the fastpath, which only happens when OPTIMIZE_SIZE=n.  If it
doesn't the generated code isn't too bad, but its definitely suboptimal.

Thanks to Srivatsa Vaddagiri for providing a bugfix to the original
version of this change, which has been folded in.
Thanks to Stephan Diestelhorst for commenting on some code which relied
on an inaccurate reading of the x86 memory ordering rules.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-11-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stephan Diestelhorst <stephan.diestelhorst@amd.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:54:00 -07:00
Jeremy Fitzhardinge 354714dd26 x86, pvticketlock: Use callee-save for lock_spinning
Although the lock_spinning calls in the spinlock code are on the
uncommon path, their presence can cause the compiler to generate many
more register save/restores in the function pre/postamble, which is in
the fast path.  To avoid this, convert it to using the pvops callee-save
calling convention, which defers all the save/restores until the actual
function is called, keeping the fastpath clean.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-8-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Attilio Rao <attilio.rao@citrix.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:53:44 -07:00
Jeremy Fitzhardinge b8fa70b51a xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-7-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:53:37 -07:00
Jeremy Fitzhardinge 80bd58fef4 xen, pvticketlock: Xen implementation for PV ticket locks
Replace the old Xen implementation of PV spinlocks with and implementation
of xen_lock_spinning and xen_unlock_kick.

xen_lock_spinning simply registers the cpu in its entry in lock_waiting,
adds itself to the waiting_cpus set, and blocks on an event channel
until the channel becomes pending.

xen_unlock_kick searches the cpus in waiting_cpus looking for the one
which next wants this lock with the next ticket, if any.  If found,
it kicks it by making its event channel pending, which wakes it up.

We need to make sure interrupts are disabled while we're relying on the
contents of the per-cpu lock_waiting values, otherwise an interrupt
handler could come in, try to take some other lock, block, and overwrite
our values.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-6-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 [ Raghavendra:  use function + enum instead of macro, cmpxchg for zero status reset
Reintroduce break since we know the exact vCPU to send IPI as suggested by Konrad.]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:53:23 -07:00
Jeremy Fitzhardinge bf7aab3ad4 xen: Defer spinlock setup until boot CPU setup
There's no need to do it at very early init, and doing it there
makes it impossible to use the jump_label machinery.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-5-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:53:18 -07:00
Jeremy Fitzhardinge 545ac13892 x86, spinlock: Replace pv spinlocks with pv ticketlocks
Rather than outright replacing the entire spinlock implementation in
order to paravirtualize it, keep the ticket lock implementation but add
a couple of pvops hooks on the slow patch (long spin on lock, unlocking
a contended lock).

Ticket locks have a number of nice properties, but they also have some
surprising behaviours in virtual environments.  They enforce a strict
FIFO ordering on cpus trying to take a lock; however, if the hypervisor
scheduler does not schedule the cpus in the correct order, the system can
waste a huge amount of time spinning until the next cpu can take the lock.

(See Thomas Friebel's talk "Prevent Guests from Spinning Around"
http://www.xen.org/files/xensummitboston08/LHP.pdf for more details.)

To address this, we add two hooks:
 - __ticket_spin_lock which is called after the cpu has been
   spinning on the lock for a significant number of iterations but has
   failed to take the lock (presumably because the cpu holding the lock
   has been descheduled).  The lock_spinning pvop is expected to block
   the cpu until it has been kicked by the current lock holder.
 - __ticket_spin_unlock, which on releasing a contended lock
   (there are more cpus with tail tickets), it looks to see if the next
   cpu is blocked and wakes it if so.

When compiled with CONFIG_PARAVIRT_SPINLOCKS disabled, a set of stub
functions causes all the extra code to go away.

Results:
=======
setup: 32 core machine with 32 vcpu KVM guest (HT off)  with 8GB RAM
base = 3.11-rc
patched = base + pvspinlock V12

+-----------------+----------------+--------+
 dbench (Throughput in MB/sec. Higher is better)
+-----------------+----------------+--------+
|   base (stdev %)|patched(stdev%) | %gain  |
+-----------------+----------------+--------+
| 15035.3   (0.3) |15150.0   (0.6) |   0.8  |
|  1470.0   (2.2) | 1713.7   (1.9) |  16.6  |
|   848.6   (4.3) |  967.8   (4.3) |  14.0  |
|   652.9   (3.5) |  685.3   (3.7) |   5.0  |
+-----------------+----------------+--------+

pvspinlock shows benefits for overcommit ratio > 1 for PLE enabled cases,
and undercommits results are flat

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-2-git-send-email-raghavendra.kt@linux.vnet.ibm.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Attilio Rao <attilio.rao@citrix.com>
[ Raghavendra: Changed SPIN_THRESHOLD, fixed redefinition of arch_spinlock_t]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 07:53:05 -07:00
Andi Kleen 9a55fdbe94 x86, asmlinkage, paravirt: Add __visible/asmlinkage to xen paravirt ops
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1375740170-7446-13-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-06 14:20:56 -07:00
Jason Wang 9df56f19a5 x86: Correctly detect hypervisor
We try to handle the hypervisor compatibility mode by detecting hypervisor
through a specific order. This is not robust, since hypervisors may implement
each others features.

This patch tries to handle this situation by always choosing the last one in the
CPUID leaves. This is done by letting .detect() return a priority instead of
true/false and just re-using the CPUID leaf where the signature were found as
the priority (or 1 if it was found by DMI). Then we can just pick hypervisor who
has the highest priority. Other sophisticated detection method could also be
implemented on top.

Suggested by H. Peter Anvin and Paolo Bonzini.

Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Doug Covelli <dcovelli@vmware.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Hecht <dhecht@vmware.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/1374742475-2485-4-git-send-email-jasowang@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-05 06:35:33 -07:00
Paul Gortmaker 148f9bb877 x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:56 -04:00
Linus Torvalds 21884a83b2 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...
2013-07-06 14:09:38 -07:00
Thomas Gleixner 2b0f89317e Merge branch 'timers/posix-cpu-timers-for-tglx' of
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core

Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-04 23:11:22 +02:00
Linus Torvalds 3e34131a65 Bug-fixes:
* Fix memory leak when CPU hotplugging.
 * Compile bugs with various #ifdefs
 * Fix state changes in Xen PCI front not dealing well with new toolstack.
 * Cleanups in code (use pr_*, fix 80 characters splits, etc)
 * Long standing bug in double-reporting the steal time
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR0Xc1AAoJEFjIrFwIi8fJo68H/jZaJJmytDI7exHTyq8fSGXQ
 5OERw5YZeM5jZQG55YC5hmGS5oIpKEdBt+aAEpuofYUhrR/ZFqDr0j+QEiqC36bl
 cl0/IAnMBGnyyO6FYY4Sut2H+S5BGYQNbwo9YAtgKtZANr2eLABxYUfMU44I/jCW
 M7DAojME9OZLBW3ORYZTGf1A0T8hJINhxZIWhtLMrkckCb9AZMieKdMOHJEWq2jl
 aPxx78U+2CLTdLquOLIiBEiTO3vAzx2Wt4prD+uCizWna45H9gBj7GFwBYH7p9Ry
 TFyzmDc5PufThTilfDyQW1y4yiNLpFDC/67a1wpwObEBn87hstHgwHQQ5INzqwY=
 =Ej7M
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.11-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bugfixes from Konrad Rzeszutek Wilk:
 - Fix memory leak when CPU hotplugging.
 - Compile bugs with various #ifdefs
 - Fix state changes in Xen PCI front not dealing well with new
   toolstack.
 - Cleanups in code (use pr_*, fix 80 characters splits, etc)
 - Long standing bug in double-reporting the steal time

* tag 'stable/for-linus-3.11-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/time: remove blocked time accounting from xen "clockchip"
  xen: Convert printks to pr_<level>
  xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspend
  xen/pcifront: Deal with toolstack missing 'XenbusStateClosing' state.
  xen/time: Free onlined per-cpu data structure if we want to online it again.
  xen/time: Check that the per_cpu data structure has data before freeing.
  xen/time: Don't leak interrupt name when offlining.
  xen/time: Encapsulate the struct clock_event_device in another structure.
  xen/spinlock: Don't leak interrupt name when offlining.
  xen/smp: Don't leak interrupt name when offlining.
  xen/smp: Set the per-cpu IRQ number to a valid default.
  xen/smp: Introduce a common structure to contain the IRQ name and interrupt line.
  xen/smp: Coalesce the free_irq calls in one function.
  xen-pciback: fix error return code in pcistub_irq_handler_switch()
2013-07-03 13:12:42 -07:00
Linus Torvalds d652df0b2f Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU changes from Ingo Molnar:
 "There are two bigger changes in this tree:

   - Add an [early-use-]safe static_cpu_has() variant and other
     robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS
     configurable debugging facility, motivated by recent obscure FPU
     code bugs, by Borislav Petkov

   - Reimplement FPU detection code in C and drop the old asm code, by
     Peter Anvin."

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: Use static_cpu_has_safe before alternatives
  x86: Add a static_cpu_has_safe variant
  x86: Sanity-check static_cpu_has usage
  x86, cpu: Add a synthetic, always true, cpu feature
  x86: Get rid of ->hard_math and all the FPU asm fu
2013-07-02 16:26:44 -07:00
David Vrabel 47433b8c9d x86: xen: Sync the CMOS RTC as well as the Xen wallclock
Adjustments to Xen's persistent clock via update_persistent_clock()
don't actually persist, as the Xen wallclock is a software only clock
and modifications to it do not modify the underlying CMOS RTC.

The x86_platform.set_wallclock hook is there to keep the hardware RTC
synchronized. On a guest this is pointless.

On Dom0 we can use the native implementaion which actually updates the
hardware RTC, but we still need to keep the software emulation of RTC
for the guests up to date. The subscription to the pvclock_notifier
allows us to emulate this easily. The notifier is called at every tick
and when the clock was set.

Right now we only use that notifier when the clock was set, but due to
the fact that it is called periodically from the timekeeping update
code, we can utilize it to emulate the NTP driven drift compensation
of update_persistant_clock() for the Xen wall (software) clock.

Add a 11 minutes periodic update to the pvclock_gtod notifier callback
to achieve that. The static variable 'next' which maintains that 11
minutes update cycle is protected by the core code serialization so
there is no need to add a Xen specific serialization mechanism.

[ tglx: Massaged changelog and added a few comments ]

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28 23:15:07 +02:00
David Vrabel 5584880e44 x86: xen: Sync the wallclock when the system time is set
Currently the Xen wallclock is only updated every 11 minutes if NTP is
synchronized to its clock source (using the sync_cmos_clock() work).
If a guest is started before NTP is synchronized it may see an
incorrect wallclock time.

Use the pvclock_gtod notifier chain to receive a notification when the
system time has changed and update the wallclock to match.

This chain is called on every timer tick and we want to avoid an extra
(expensive) hypercall on every tick.  Because dom0 has historically
never provided a very accurate wallclock and guests do not expect one,
we can do this simply: the wallclock is only updated if the clock was
set.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/1372329348-20841-5-git-send-email-david.vrabel@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28 23:15:06 +02:00
Laszlo Ersek 0b0c002c34 xen/time: remove blocked time accounting from xen "clockchip"
... because the "clock_event_device framework" already accounts for idle
time through the "event_handler" function pointer in
xen_timer_interrupt().

The patch is intended as the completion of [1]. It should fix the double
idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to
stolen time accounting (the removed code seems to be isolated).

The approach may be completely misguided.

[1] https://lkml.org/lkml/2011/10/6/10
[2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html

John took the time to retest this patch on top of v3.10 and reported:
"idle time is correctly incremented for pv and hvm for the normal
case, nohz=off and nohz=idle." so lets put this patch in.

CC: stable@vger.kernel.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-28 12:11:39 -04:00
Konrad Rzeszutek Wilk 09e99da766 xen/time: Free onlined per-cpu data structure if we want to online it again.
If the per-cpu time data structure has been onlined already and
we are trying to online it again, then free the previous copy
before blindly over-writting it.

A developer naturally should not call this function multiple times
but just in case.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-10 08:43:37 -04:00
Konrad Rzeszutek Wilk a05e2c371f xen/time: Check that the per_cpu data structure has data before freeing.
We don't check whether the per_cpu data structure has actually
been freed in the past. This checks it and if it has been freed
in the past then just continues on without double-freeing.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-10 08:43:36 -04:00
Konrad Rzeszutek Wilk c9d76a24a2 xen/time: Don't leak interrupt name when offlining.
When the user does:
    echo 0 > /sys/devices/system/cpu/cpu1/online
    echo 1 > /sys/devices/system/cpu/cpu1/online

kmemleak reports:
kmemleak: 7 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

One of the leaks is from xen/time:

unreferenced object 0xffff88003fa51280 (size 32):
  comm "swapper/0", pid 1, jiffies 4294667339 (age 1027.789s)
  hex dump (first 32 bytes):
    74 69 6d 65 72 31 00 00 00 00 00 00 00 00 00 00  timer1..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81660721>] kmemleak_alloc+0x21/0x50
    [<ffffffff81190aac>] __kmalloc_track_caller+0xec/0x2a0
    [<ffffffff812fe1bb>] kvasprintf+0x5b/0x90
    [<ffffffff812fe228>] kasprintf+0x38/0x40
    [<ffffffff81041ec1>] xen_setup_timer+0x51/0xf0
    [<ffffffff8166339f>] xen_cpu_up+0x5f/0x3e8
    [<ffffffff8166bbf5>] _cpu_up+0xd1/0x14b
    [<ffffffff8166bd48>] cpu_up+0xd9/0xec
    [<ffffffff81ae6e4a>] smp_init+0x4b/0xa3
    [<ffffffff81ac4981>] kernel_init_freeable+0xdb/0x1e6
    [<ffffffff8165ce39>] kernel_init+0x9/0xf0
    [<ffffffff8167edfc>] ret_from_fork+0x7c/0xb0
    [<ffffffffffffffff>] 0xffffffffffffffff

This patch fixes it by stashing away the 'name' in the per-cpu
data structure and freeing it when offlining the CPU.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-10 08:43:35 -04:00
Konrad Rzeszutek Wilk 31620a198c xen/time: Encapsulate the struct clock_event_device in another structure.
We don't do any code movement. We just encapsulate the struct clock_event_device
in a new structure which contains said structure and a pointer to
a char *name. The 'name' will be used in 'xen/time: Don't leak interrupt
name when offlining'.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-10 08:43:34 -04:00
Konrad Rzeszutek Wilk 354e7b7619 xen/spinlock: Don't leak interrupt name when offlining.
When the user does:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

kmemleak reports:
kmemleak: 7 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

unreferenced object 0xffff88003fa51260 (size 32):
  comm "swapper/0", pid 1, jiffies 4294667339 (age 1027.789s)
  hex dump (first 32 bytes):
    73 70 69 6e 6c 6f 63 6b 31 00 00 00 00 00 00 00  spinlock1.......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81660721>] kmemleak_alloc+0x21/0x50
    [<ffffffff81190aac>] __kmalloc_track_caller+0xec/0x2a0
    [<ffffffff812fe1bb>] kvasprintf+0x5b/0x90
    [<ffffffff812fe228>] kasprintf+0x38/0x40
    [<ffffffff81663789>] xen_init_lock_cpu+0x61/0xbe
    [<ffffffff816633a6>] xen_cpu_up+0x66/0x3e8
    [<ffffffff8166bbf5>] _cpu_up+0xd1/0x14b
    [<ffffffff8166bd48>] cpu_up+0xd9/0xec
    [<ffffffff81ae6e4a>] smp_init+0x4b/0xa3
    [<ffffffff81ac4981>] kernel_init_freeable+0xdb/0x1e6
    [<ffffffff8165ce39>] kernel_init+0x9/0xf0
    [<ffffffff8167edfc>] ret_from_fork+0x7c/0xb0
    [<ffffffffffffffff>] 0xffffffffffffffff

Instead of doing it like the "xen/smp: Don't leak interrupt name when offlining"
patch did (which has a per-cpu structure which contains both the
IRQ number and char*) we use a per-cpu pointers to a *char.

The reason is that the "__this_cpu_read(lock_kicker_irq);" macro
blows up with "__bad_size_call_parameter()" as the size of the
returned structure is not within the parameters of what it expects
and optimizes for.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-10 08:43:33 -04:00