Commit Graph

8 Commits

Author SHA1 Message Date
Thierry Reding 17297a2813 drm/tegra: dsi - Initialize proper packet sequences
The packet sequencer needs to be programmed depending on the video mode
of the attached peripheral. Add support for non-burst video modes with
sync events (as opposed to sync pulses) and select either sequence
depending on the video mode.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:29 +02:00
Thierry Reding 3b077afb3a drm/tegra: dsi - Implement VDD supply support
The DSI controllers are powered by a (typically 1.2V) regulator. Usually
this is always on, so there was no need to support enabling or disabling
it thus far. But in order not to consume any power when DSI is inactive,
give the driver a chance to enable or disable the supply as needed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:28 +02:00
Thierry Reding bcfc7acbca drm/tegra: dsi - Remove unneeded code
A bunch of registers are initialized to 0 upon during driver probe. It
turns out that none of these are actually needed, so they can simply be
dropped.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:27 +02:00
Thierry Reding f7d6889b79 drm/tegra: dsi - Use internal pixel format
The pixel format enumeration values used by the Tegra DSI controller
don't match those defined by the DSI framework. Make sure to convert
them to the internal format before writing it to the register.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:26 +02:00
Thierry Reding 9a2ac2dcdc drm/tegra: Relicense under GPL v2
The majority of the code in this driver is licensed under the GPL v2, so
relicense the rest under GPL v2 as well for consistency.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04 09:12:51 +02:00
Thierry Reding 72d3028615 drm/tegra: Relocate some output-specific code
Some of the code in the CRTC's mode setting code is specific to the RGB
output or needs to be called slightly differently depending on the type
of output. Push that code down into the output drivers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:07 +01:00
Wei Yongjun 85316eae48 drm/tegra: Fix return value check
In case of error, the devm_ioremap_resource() function returns ERR_PTR()
and never NULL. The NULL test in the return value check should therefore
be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:05 +01:00
Thierry Reding dec727399a drm/tegra: Add DSI support
This commit adds support for both DSI outputs found on Tegra. Only very
minimal functionality is implemented, so advanced features like ganged
mode won't work.

Due to the lack of other test hardware, some sections of the driver are
hardcoded to work with Dalmore.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:04 +01:00