[ Upstream commit f98364e926626c678fb4b9004b75cacf92ff0662 ]
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31edf4bbe0ba27fd03ac7d87eb2ee3d2a231af6d ]
nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Fixes: 47d902b90a ("nbd: add a status netlink command")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240218042534.it.206-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85248d670b71d9edda9459ee14fdc85c8e9632c0 ]
ublk_cancel_dev() just calls ublk_cancel_queue() to cancel all pending
io commands after ublk request queue is idle. The only protection is just
the read & write of ubq->nr_io_ready and avoid duplicated command cancel,
so add one per-queue lock with cancel flag for providing this protection,
meantime move ublk_cancel_dev() out of ub->mutex.
Then we needn't to call io_uring_cmd_complete_in_task() to cancel
pending command. And the same cancel logic will be re-used for
cancelable uring command.
This patch basically reverts commit ac5902f84b ("ublk: fix AB-BA lockdep warning").
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ce6e2db00de8103a0687fb0f65fd17124a51aaa ]
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e169bd4fb2b36c4b2bee63c35c740c85daeb2e86 ]
Move set_capacity() outside of the section procected by (&d->lock).
To avoid possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
[1] lock(&bdev->bd_size_lock);
local_irq_disable();
[2] lock(&d->lock);
[3] lock(&bdev->bd_size_lock);
<Interrupt>
[4] lock(&d->lock);
*** DEADLOCK ***
Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity().
[2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc()
is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call.
In this situation an attempt to acquire [4]lock(&d->lock) from
aoecmd_cfg_rsp() will lead to deadlock.
So the simplest solution is breaking lock dependency
[2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity()
outside.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240124072436.3745720-2-bigunclemax@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e4bf6a08d1e127bcc4bd72557f2dfafc6bc7f41 ]
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ded080c86b3f99683774af0441a58fc2e3d60cae upstream.
The running list is supposed to contain requests that are pinning the
exclusive lock, i.e. those that must be flushed before exclusive lock
is released. When wake_lock_waiters() is called to handle an error,
requests on the acquiring list are failed with that error and no
flushing takes place. Briefly moving them to the running list is not
only pointless but also harmful: if exclusive lock gets acquired
before all of their state machines are scheduled and go through
rbd_lock_del_request(), we trigger
rbd_assert(list_empty(&rbd_dev->running_list));
in rbd_try_acquire_lock().
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit baa7d536077dcdfe2b70c476a8873d1745d3de0f ]
__loop_update_dio only checks the alignment requirement for block backed
file systems, but misses them for the case where the loop device is
created directly on top of another block device. Due to this creating
a loop device with default option plus the direct I/O flag on a > 512 byte
sector size file system will lead to incorrect I/O being submitted to the
lower block device and a lot of error from the lock layer. This can
be seen with xfstests generic/563.
Fix the code in __loop_update_dio by factoring the alignment check into
a helper, and calling that also for the struct block_device of a block
device inode.
Also remove the TODO comment talking about dynamically switching between
buffered and direct I/O, which is a would be a recipe for horrible
performance and occasional data loss.
Fixes: 2e5ab5f379 ("block: loop: prepare for supporing direct IO")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240117175901.871796-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9525de865410047fa962867b4fcd33943b206f ]
null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.
Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.
Fixes: ea17fd354c ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e0792449928943c15d1af9f63816911d139267 ]
Commit 4e04005256 ("virtio-blk: support polling I/O") triggers the
following gcc 13 W=1 warnings:
drivers/block/virtio_blk.c: In function ‘init_vq’:
drivers/block/virtio_blk.c:1077:68: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~
drivers/block/virtio_blk.c:1077:58: note: directive argument in the range [-2147483648, 65534]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~
drivers/block/virtio_blk.c:1077:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a false positive because the lower bound -2147483648 is
incorrect. The true range of i is [0, num_vqs - 1] where 0 < num_vqs <
65536.
The code mixes int, unsigned short, and unsigned int types in addition
to using "%d" for an unsigned value. Use unsigned short and "%u"
consistently to solve the compiler warning.
Cc: Suwan Kim <suwan.kim027@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041509.DIyvEt9h-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204140743.1487843-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98c598afc22d4e43c2ad91860b65996d0c099a5d ]
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.
T1
nbd_ioctl
__nbd_ioctl
nbd_add_socket
blk_mq_freeze_queue
T2
recv_work
nbd_read_reply
sock_xmit
krealloc config->socks
def config->socks
Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.
==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779
Workqueue: knbd4-recv recv_work
Call Trace:
__dump_stack
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
sock_xmit+0x525/0x550
nbd_read_reply+0xfe/0x2c0
recv_work+0x1c2/0x750
process_one_work+0x6b6/0xf10
worker_thread+0xdd/0xd80
kthread+0x30a/0x410
ret_from_fork+0x22/0x30
Allocated by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track
set_alloc_info
__kasan_kmalloc
__kasan_kmalloc.constprop.0+0xf0/0x130
slab_post_alloc_hook
slab_alloc_node
slab_alloc
__kmalloc_track_caller+0x157/0x550
__do_krealloc
krealloc+0x37/0xb0
nbd_add_socket
+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free.part.0+0x13f/0x1b0
slab_free_hook
slab_free_freelist_hook
slab_free
kfree+0xcb/0x6c0
krealloc+0x56/0xb0
nbd_add_socket+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2da049f419417808466c529999170f5c3ef7d3d ]
Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.
T1 T2
nbd_open
nbd_get_config_unlocked
nbd_genl_connect
nbd_alloc_and_init_config
//memory reordered
refcount_set(&nbd->config_refs, 1) // 2
nbd->config
->null point
nbd->config = config // 1
Fix it by adding smp barrier to guarantee the execution sequence.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3123ac77923341774ca3ad1196ad20bb0732bf70 ]
There are no functional changes, just to make code cleaner and prepare
to fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b59860540a4018e8071dc18d4893ec389506b7d ]
There are no functional changes, make the code cleaner and prepare to
fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fafb51a67fb883eb2dde352539df939a251851be ]
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 327462725b0f759f093788dfbcb2f1fd132f956b ]
Commit 4af5f2e030 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().
Fix this by implementing ->free_disk and free private data in it.
Fixes: 4af5f2e030 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NWf+
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes, for nbd and md"
* tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux:
nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctl
md/raid5: release batch_last before waiting for another stripe_head
blk_mark_disk_dead is the proper interface to shut down a block
device, but it also makes the disk unusable forever.
nbd_clear_sock_ioctl on the other hand wants to shut down the file
system, but allow the block device to be used again when when connected
to another socket. Switch nbd to use disk_force_media_change and
nbd_bdev_reset to go back to a behavior of the old __invalidate_device
call, with the added benefit of incrementing the device generation
as there is no guarantee the old content comes back when the device
is reconnected.
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 0c1c9a27ce ("nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231003153106.1331363-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rbd_dev_refresh() has been holding header_rwsem across header and
parent info read-in unnecessarily for ages. With commit 870611e487
("rbd: get snapshot context after exclusive lock is ensured to be
held"), the potential for deadlocks became much more real owning to
a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores
not allowing new readers after a writer is registered.
For example, assuming that I/O request 1, I/O request 2 and header
read-in request all target the same OSD:
1. I/O request 1 comes in and gets submitted
2. watch error occurs
3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
4. after reestablishing the watch, rbd_reregister_watch() calls
rbd_dev_refresh() which takes header_rwsem for write and submits
a header read-in request
5. I/O request 2 comes in: after taking lock_rwsem for read in
__rbd_img_handle_request(), it blocks trying to take header_rwsem
for read in rbd_img_object_requests()
6. another watch error occurs
7. rbd_watch_errcb() blocks trying to take lock_rwsem for write
8. I/O request 1 completion is received by the messenger but can't be
processed because lock_rwsem won't be granted anymore
9. header read-in request completion can't be received, let alone
processed, because the messenger is stranded
Change rbd_dev_refresh() to take header_rwsem only for actually
updating rbd_dev->header. Header and parent info read-in don't need
any locking.
Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition
Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header
Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev
Cc: stable@vger.kernel.org
Fixes: 870611e487 ("rbd: get snapshot context after exclusive lock is ensured to be held")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Unlike header read-in, parent info read-in is already decoupled in
get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along
with the processing logic.
Separate the initial read-in and update read-in logic into
rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and
have rbd_dev_v2_parent_info() just populate struct parent_image_info
(i.e. what get_parent_info() did). Some existing QoI issues, like
flatten of a standalone clone being disregarded on refresh, remain.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make rbd_dev_header_info() populate a passed struct rbd_image_header
instead of rbd_dev->header and introduce rbd_dev_update_header() for
updating mutable fields in rbd_dev->header upon refresh. The initial
read-in of both mutable and immutable fields in rbd_dev_image_probe()
passes in rbd_dev->header so no update step is required there.
rbd_init_layout() is now called directly from rbd_dev_image_probe()
instead of individually in format 1 and format 2 implementations.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Move rbd_dev_refresh() definition further down to avoid having to
move struct parent_image_info definition in the next commit. This
spares some forward declarations too.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
-----BEGIN PGP SIGNATURE-----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=4SLW
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix null_blk polled IO timeout handling (Chengming)
- Regression fix for swapped arguments in drbd bvec_set_page()
(Christoph)
- String length handling fix for s390 dasd (Heiko)
- Fixes for blk-throttle accounting (Yu)
- Fix page pinning issue for same page segments (Christoph)
- Remove redundant file_remove_privs() call (Christoph)
- Fix a regression in partition handling for devices not supporting
partitions (Li)
* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
drbd: swap bvec_set_page len and offset
block: fix pin count management when merging same-page segments
null_blk: fix poll request timeout handling
s390/dasd: fix string length handling
block: don't add or resize partition on the disk with GENHD_FL_NO_PART
block: remove the call to file_remove_privs in blkdev_write_iter
blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
blk-throttle: print signed value 'carryover_bytes/ios' for user
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range (requires
re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with assistance
from Xiubo Li, Luís Henriques and others, including several dependant
changes in the MDS, netfs helper library and fscrypt framework itself.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmT4pl4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi5kzB/4sMgzZyUa3T1vA/G2pPvEkyy1qDxsW
y+o4dDMWA9twcrBVpNuGd54wbXpmO/LAekHEdorjayH+f0zf10MsnP1ePz9WB3NG
jr7RRujb+Gpd2OFYJXGSEbd3faTg8M2kpGCCrVe7SFNoyu8z9NwFItwWMog5aBjX
ODGQrq+kA4ARA6xIqwzF5gP0zr+baT9rWhQdm7Xo9itWdosnbyDLJx1dpEfLuqBX
te3SmifDzedn3Gw73hdNo/+ybw0kHARoK+RmXCTsoDDQw+JsoO9KxZF5Q8QcDELq
2woPNp0Hl+Dm4MkzGnPxv56Qj8ZDViS59syXC0CfGRmu4nzF1Rw+0qn5
=/WlE
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range
(requires re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with
assistance from Xiubo Li, Luís Henriques and others, including several
dependant changes in the MDS, netfs helper library and fscrypt
framework itself"
* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
ceph: make num_fwd and num_retry to __u32
ceph: make members in struct ceph_mds_request_args_ext a union
rbd: use list_for_each_entry() helper
libceph: do not include crypto/algapi.h
ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
ceph: fix updating i_truncate_pagecache_size for fscrypt
ceph: wait for OSD requests' callbacks to finish when unmounting
ceph: drop messages from MDS when unmounting
ceph: update documentation regarding snapshot naming limitations
ceph: prevent snapshot creation in encrypted locked directories
ceph: add support for encrypted snapshot names
ceph: invalidate pages when doing direct/sync writes
ceph: plumb in decryption during reads
ceph: add encryption support to writepage and writepages
ceph: add read/modify/write to ceph_sync_write
ceph: align data in pages in ceph_sync_write
ceph: don't use special DIO path for encrypted inodes
ceph: add truncate size handling support for fscrypt
ceph: add object version support for sync read
libceph: allow ceph_osdc_new_request to accept a multi-op read
...
bvec_set_page has the following signature:
static inline void bvec_set_page(struct bio_vec *bv, struct page *page,
unsigned int len, unsigned int offset)
However, the usage in DRBD swaps the len and offset parameters. This
leads to a bvec with length=0 instead of the intended length=4096, which
causes sock_sendmsg to return -EIO.
This leaves DRBD unable to transmit any pages and thus completely
broken.
Swapping the parameters fixes the regression.
Fixes: eeac7405c7 ("drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()")
Reported-by: Serguei Ivantsov <manowar@gsc-game.com>
Link: https://lore.kernel.org/regressions/CAKH+VT3YLmAn0Y8=q37UTDShqxDLsqPcQ4hBMzY7HPn7zNx+RQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230906133034.948817-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/
Fixes: 0a593fbbc2 ("null_blk: poll queue support")
Reported-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230901120306.170520-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert list_for_each() to list_for_each_entry() so that the tmp
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=p1bd
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpbgAKCRCRxhvAZXjc
oi8PAQCtXelGZHmTcmevsO8p4Qz7hFpkonZ/TnxKf+RdnlNgPgD+NWi+LoRBpaAj
xk4z8SqJaTTP4WXrG5JZ6o7EQkUL8gE=
=2e9I
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZLVnJwAKCRBKO3ySh0YR
pqVIAP9u9CZEJ2Zcc7YpBj1MLUQGr2xBmz8RJEVJbQHKVgYcQwEA9BNb4eH4i2Af
K7Qp0OGNgyzZw37lN23Uf/SDuBK2QgM=
=seMl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXo2AAKCRCRxhvAZXjc
ojDfAQDguc2saF8WLeXtn2O0pGOW8vTrhpwiFHNI6hwdzf07/AD+LGBpFEqYKyX5
NHPzdR7YYpJoTsQzR4JFJVZqN9Q1xgU=
=wDq0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.6-merge-2' of ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
FDFMTBEG is used by fdformat to calibrate before formatting a disk.
Neither the atari nor PC floppy driver sync data, which also seems
a bit pointless for a disk hat is about to get formatted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
While changing the format of a floppy isn't strictly speaking a media
change, the effects are the same in that the content of the media
changes and the diskseq should be increased and uevent should be
sent. Switch from calling __invalidate_device to
disk_force_media_change to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
nbd_clear_sock_ioctl kills the socket and with that the block
device. Instead of just invalidating file system buffers,
mark the device as dead, which will also invalidate the buffers
as part of the proper shutdown sequence. This also includes
invalidating partitions if there are any.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There isn't any reason to not support REQ_OP_ZONE_RESET_ALL given everything
is actually handled in userspace, not mention it is pretty easy to support
RESET_ALL.
So enable REQ_OP_ZONE_RESET_ALL and let userspace handle it.
Verified by 'tools/zbc_reset_zone -all /dev/ublkb0' in libzbc[1] with
libublk-rs based ublk-zoned target prototype[2], follows command line
for creating ublk-zoned:
cargo run --example zoned -- add -1 1024 # add $dev_id $DEV_SIZE
[1] https://github.com/westerndigitalcorporation/libzbc
[2] https://github.com/ming1/libublk-rs/tree/zoned.v2
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230810124326.321472-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LnzH
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Main thing here is the fix for the regression in flush handling which
caused IO hangs/stalls for a few reporters. Hopefully that should all
be sorted out now. Outside of that, just a few minor fixes for issues
that were introduced in this cycle"
* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
blk-mq: release scheduler resource when request completes
blk-crypto: dynamically allocate fallback profile
blk-cgroup: hold queue_lock when removing blkg->q_node
drivers/rnbd: restore sysfs interface to rnbd-client
Commit 137380c0ec renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 137380c0ec renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use memdup_user_nul() helper instead of open-coding
to simplify the code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230815114815.1551171-1-ruanjinjie@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=+1Vt
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)
- RCU poll fix for NVMe (Ming)
- Fix for an IO stall with polled IO (me)
- Fix for blk-iocost stats enable/disable accounting (Chengming)
- Regression fix for large pages for zram (Christoph)
* tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux:
nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
blk-iocost: fix queue stats accounting
block: don't make REQ_POLLED imply REQ_NOWAIT
block: get rid of unused plug->nowait flag
zram: take device and not only bvec offset into account
nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
nvme-rdma: fix potential unbalanced freeze & unfreeze
nvme-tcp: fix potential unbalanced freeze & unfreeze
nvme: fix possible hang when removing a controller during error recovery
The added check of 'req_op(req) == REQ_OP_ZONE_APPEND' should have been
done after the request is confirmed as valid.
Actually here, the request should always been true, so add one
WARN_ON_ONCE(!req), meantime move the zone_append check after
checking the request.
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 29802d7ca3 ("ublk: enable zoned storage support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230811135216.420404-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the module init function, which by definition is used only
locally, so mark it static to avoid a warning:
drivers/block/swim3.c:1280:5: error: no previous prototype for 'swim3_init' [-Werror=missing-prototypes]
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two warnings reported by smatch:
drivers/block/ublk_drv.c:445 ublk_setup_iod_zoned() warn:
signedness bug returning '(-95)'
drivers/block/ublk_drv.c:963 ublk_setup_iod() warn:
signedness bug returning '(-5)'
The type of "blk_status_t" is either be a u32 or u8, but this two
functions return a negative value when not supported or failed. Use
the error code of the blk module to fix these warnings.
Fixes: 29802d7ca3 ("ublk: enable zoned storage support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202308100201.TCRhgdvN-lkp@intel.com/
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230810084836.3535322-1-lizetao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add zoned storage support to ublk: report_zones and operations:
- REQ_OP_ZONE_OPEN
- REQ_OP_ZONE_CLOSE
- REQ_OP_ZONE_FINISH
- REQ_OP_ZONE_RESET
- REQ_OP_ZONE_APPEND
The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to
communicate ALBA back to the kernel. Therefore ublk must be used with the
user copy feature (UBLK_F_USER_COPY) for zoned storage support to be
available. Without this feature, ublk will not allow zoned storage support.
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230804114610.179530-4-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for zoned storage support, move the check for empty `addr`
field into the command handler case statement. Note that the check makes no
sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be
set for this command.
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230804114610.179530-3-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chun-Yi Lee