That commit was part of the changes moving x86 to the generic CPU hotplug
interrupt migration code. The force flag was required on x86 before the
hierarchical irqdomain rework, but invoking set_affinity() with force=true
stayed and had no side effects.
At some point in the past, the force flag got repurposed to support the
exynos timer interrupt affinity setting to a not yet online CPU, so the
interrupt controller callback does not verify the supplied affinity mask
against cpu_online_mask.
Setting the flag in the CPU hotplug code causes the cpu online masking to
be blocked on these irq controllers and results in potentially affining an
interrupt to the CPU which is unplugged, i.e. instead of moving it away,
it's just reassigned to it.
As the force flags is not longer needed on x86, it's safe to revert that
patch so the ARM irqchips which use the force flag work again.
Add comments to that effect, so this won't happen again.
Note: The online mask handling should be done in the generic code and the
force flag and the masking in the irq chips removed all together, but
that's not a change possible for 4.13.
Fixes: 77f85e66aa ("genirq/cpuhotplug: Set force affinity flag on hotplug migration")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707271217590.3109@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since the PMU register interface is banked per CPU, CPU PMU interrrupts
cannot be handled by a CPU other than the one with the PMU asserting the
interrupt. This means that migrating PMU SPIs, as we do during a CPU
hotplug operation doesn't make any sense and can lead to the IRQ being
disabled entirely if we route a spurious IRQ to the new affinity target.
This has been observed in practice on AMD Seattle, where CPUs on the
non-boot cluster appear to take a spurious PMU IRQ when coming online,
which is routed to CPU0 where it cannot be handled.
This patch passes IRQF_PERCPU for PMU SPIs and forcefully sets their
affinity prior to requesting them, ensuring that they cannot
be migrated during hotplug events. This interacts badly with the DB8500
erratum workaround that ping-pongs the interrupt affinity from the handler,
so we avoid passing IRQF_PERCPU in that case by allowing the IRQ flags
to be overridden in the platdata.
Fixes: 3cf7ee98b8 ("drivers/perf: arm_pmu: move irq request/free into probe")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Turns out that just writing CURPOS isn't sufficient to move the cursor
on some platforms. My 830 works just fine, but eg. 945 and PNV don't.
On those platforms we need to arm even the CURPOS update with a
CURBASE write.
Even worse, a write to any of the cursor register apart from CURBASE
will cancel an already pending cursor update. So if we have armed a
CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank
would cancel that armed update. Thus we're left with a cursor that
doesn't appear to move, or even change shape.
Fix the problem by always performing the CURBASE write after a
CURPOS write. Bspec is somewhat unclear which platforms actually
require this CURBASE write and which don't. So to keep it simple
and to make sure we really fix the problem across all supported
devices, let's just perform the CURBASE write unconditionally.
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790
Fixes: 75343a44c9 ("drm/i915: Drop useless posting reads from cursor commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714155227.6089-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8753d2bc5e)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix the sizeof(ptr) vs. sizeof(*ptr) typo.
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com
(cherry picked from commit edd9003f7f)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: dad6f37c26 ("powerpc: subpage_protect: Increase the array size to take care of 64TB")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The rework of the exynos DRM clock handling introduced
warnings for configurations that have CONFIG_PM disabled:
drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function]
static void hdmi_clk_disable_gates(struct hdmi_context *hdata)
^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function]
static int hdmi_clk_enable_gates(struct hdmi_context *hdata)
The problem is that the PM functions themselves are inside of
an #ifdef, but some functions they call are not.
This patch removes the #ifdef and instead marks the PM functions
as __maybe_unused, which is a more reliable way to get it right.
Link: https://patchwork.kernel.org/patch/8436281/
Fixes: 9be7e98984 ("drm/exynos/hdmi: clock code re-factoring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If the s5p-cec driver is a module and the drm exynos driver is built-in, then
the CEC core will be a module also, causing the CEC notifier to fail (will be
compiled as empty functions).
To prevent this select CEC_CORE if CEC_NOTIFIER is set to ensure the CEC core
is also built into the kernel.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely
powered off and for example Odroid-U3 cannot disable TV power domain
when HDMI cable is unplugged.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves drm_bridge_add call into probe.
It doesn't need to call drm_bridge_add call every time
bind callback is called.
Changelog v2
- moved drm_bridge_remove call into remove callback.
- corrected description.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Remove the error handling of bridge_node because the bridge_node is
optional.
For example, In case of Exynos SoC, a bridge device such as mDNIe and
MIC could be placed between Display Controller and MIPI DSI device but
the bridge device is optional.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It doesn't need to try to find a bridge if bridge node doesn't exist.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o
File size after constify hdmi_match_types.
text data bss dec hex filename
13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
num_ioctls is already assigned when declaring the exynos_drm_driver
structure. No need to duplicate it here.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Three misc amd fixes.
* 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: fix AVFS voltage offset for Vega10
drm/amdgpu/gfx9: simplify and fix GRBM index selection
drm/amdgpu: Fix blocking in RCU critical section(v2)
Commit bd8b244174 ("NFS: Store the raw NFS access mask in the inode's
access cache") changed how the access results are stored after an
access() call. An NFS v4 OPEN might have access bits returned with the
opendata, so we should use the NFS4_ACCESS values when determining the
return value in nfs4_opendata_access().
Fixes: bd8b244174 ("NFS: Store the raw NFS access mask in the inode's
access cache")
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Currently dm_dax_flush() is not being called, even if underlying dax
device supports write cache, because DAXDEV_WRITE_CACHE is not being
propagated up to the DM dax device.
If the underlying dax device supports write cache, set
DAXDEV_WRITE_CACHE on the DM dax device. This will cause dm_dax_flush()
to be called.
Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
mempool_alloc() cannot fail for GFP_NOIO allocation, so there is no
point testing for failure.
One place the code tested for failure was passing "0" as the GFP
flags. This is most unusual and is probably meant to be GFP_NOIO,
so that is changed.
Also, allocation from ->extra_pool and ->prealloc_pool are repeated
before releasing the previous allocation. This can deadlock if the code
is servicing a write under high memory pressure. To avoid deadlocks,
change these to use GFP_NOWAIT and leave the error handling in place.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use GFP_NOIO for memory allocations in the I/O path. Other memory
allocations in the initialization path can use GFP_KERNEL.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes some minor issues all over the codebase.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZd0o3AAoJECgfDbjSjVRpgK0IAKsLivWrL60y/o83bFH/59K0
m7XGZ8OMGyl94PTubidM3QqJtYCt2fv+mzkuUZXzxklJ2v4csrJeF0KKQzYlI+/k
fJv9D1SX96L1yOSHVv91YI8wNNi6NqqLCg8xKd5V7xo/IwufPRmWEEppx7zi1Cb1
Ne3rRZOox4QdRUL6hQaN9MlCxQUvIL6zRM68UXtGOImLmb0O/vsic+DNjk7gItRz
/iO3WE4Ig8sbrFjntgJ/+iotJO4/0qbKMxFVQOUOluiOiOhJgGlq+qmMdM45JBzM
btED8OnuNcAWdDhtsux4ivC1Kl10cEGzXM3NzS2rV4/7A6rCRJvcFH0bUQGHdlk=
=4J1q
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
"Fixes some minor issues all over the codebase"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-net: fix module unloading
virtio-balloon: coding format cleanup
virtio-balloon: deflate via a page list
virtio_blk: Use sysfs_match_string() helper
Using variables instead of hard paths makes the requirements information
more accurate.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to hold the srcu lock when accessing memory slots
during migration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=PjH2
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: fixup missing srcu lock
We need to hold the srcu lock when accessing memory slots
during migration
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run kvm-unit-tests/eventinj.flat in L1 w/ ept=0 on both L0 and L1:
Before NMI IRET test
Sending NMI to self
NMI isr running stack 0x461000
Sending nested NMI to self
After nested NMI to self
Nested NMI isr running rip=40038e
After iret
After NMI to self
FAIL: NMI
Commit 4c4a6f790e (KVM: nVMX: track NMI blocking state separately
for each VMCS) tracks NMI blocking state separately for vmcs01 and
vmcs02. However it is not enough:
- The L2 (kvm-unit-tests/eventinj.flat) generates NMI that will fault
on IRET, so the L2 can generate #PF which can be intercepted by L0.
- L0 walks L1's guest page table and sees the mapping is invalid, it
resumes the L1 guest and injects the #PF into L1. At this point the
vmcs02 has nmi_known_unmasked=true.
- L1 sets set bit 3 (blocking by NMI) in the interruptibility-state field
of vmcs12 (and fixes the shadow page table) before resuming L2 guest.
- L1 executes VMRESUME to resume L2, causing a vmexit to L0
- during VMRESUME emulation, prepare_vmcs02 sets bit 3 in the
interruptibility-state field of vmcs02, but nmi_known_unmasked is
still true.
- L2 immediately exits to L0 with another page fault, because L0 still has
not updated the NGVA->HPA page tables. However, nmi_known_unmasked is
true so vmx_recover_nmi_blocking does not do anything.
The fix is to update nmi_known_unmasked when preparing vmcs02 from vmcs12.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PI vector for L0 and L1 must be different. If dest vcpu0
is in guest mode while vcpu1 is delivering a non-nested PI to
vcpu0, there wont't be any vmexit so that the non-nested interrupt
will be delayed.
Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are using the same vector for nested/non-nested posted
interrupts delivery, this may cause interrupts latency in
L1 since we can't kick the L2 vcpu out of vmx-nonroot mode.
This patch introduces a new vector which is only for nested
posted interrupts to solve the problems above.
Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts the change of commit f85c758dbe,
as the behavior it modified was intended.
The VM is running in 32-bit PAE mode, and Table 4-7 of the Intel manual
says:
Table 4-7. Use of CR3 with PAE Paging
Bit Position(s) Contents
4:0 Ignored
31:5 Physical address of the 32-Byte aligned
page-directory-pointer table used for linear-address
translation
63:32 Ignored (these bits exist only on processors supporting
the Intel-64 architecture)
To placate the static checker, write the mask explicitly as an
unsigned long constant instead of using a 32-bit unsigned constant.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: f85c758dbe
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify and improve the code so that the PID is always available in
the uevent even when debugfs is not available.
This adds a userspace_pid field to struct kvm, as per Radim's
suggestion, so that the PID can be retrieved on destruction too.
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Fixes: 286de8f6ac ("KVM: trigger uevents when creating or destroying a VM")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like in the allocator we must avoid touching multiple AGs out of
order when freeing blocks, as freeing still locks the AGF and can cause
the same AB-BA deadlocks as in the allocation path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
write_sysreg() may misparse the value argument because it is used
without parentheses to protect it.
This patch adds the ( ) in order to avoid any surprises.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[will: same change to write_sysreg_s]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The check for column exclusion did not verify that the event being
checked was an L2 event, and not a software event.
Software events should not be checked for column exclusion.
This resulted in a group with both software and L2 events sometimes
incorrectly rejecting the L2 event for column exclusion and
not counting it.
Add a check for PMU type before applying column exclusion logic.
Fixes: 21bdbb7102 ("perf: add qcom l2 cache perf events driver")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In commit efe0160cfd ("powerpc/64: Linker on-demand sfpr functions
for modules"), we added an ld version check early in the powerpc
top-level Makefile.
Because the Makefile runs before the kernel config is setup, the
checks for CONFIG_CPU_LITTLE_ENDIAN etc. all take the default case. So
we end up configuring ld for 32-bit big endian.
That would be OK, except that for historical (or perhaps no) reason,
we use 'override LD' to add the endian flags to the LD variable
itself, rather than the normal approach of adding them to LDFLAGS.
The end result is that when we check the ld version we run it as:
$(CROSS_COMPILE)ld -EB -m elf32ppc --version
This often works, unless you are using a 64-bit only and/or little
endian only, toolchain. In which case you see something like:
$ make defconfig
powerpc64le-linux-ld: unrecognised emulation mode: elf32ppc
Supported emulations: elf64lppc elf32lppc elf32lppclinux elf32lppcsim
/bin/sh: 1: [: -ge: unexpected operator
The proper fix is to stop using 'override LD', but that will require a
fair bit of testing. Instead we can fix it for now just by reordering
the Makefile to do the version check earlier.
Fixes: efe0160cfd ("powerpc/64: Linker on-demand sfpr functions for modules")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As for commit 68baf692c4 ("powerpc/pseries: Fix of_node_put()
underflow during DLPAR remove"), the call to of_node_put() must be
removed from pSeries_reconfig_remove_node().
dlpar_detach_node() and pSeries_reconfig_remove_node() both call
of_detach_node(), and thus the node should not be released in both
cases.
Fixes: 0829f6d1f6 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's a somewhat architectural issue with Radix MMU and KVM.
When coming out of a guest with AIL (Alternate Interrupt Location, ie,
MMU enabled), we start executing hypervisor code with the PID register
still containing whatever the guest has been using.
The problem is that the CPU can (and will) then start prefetching or
speculatively load from whatever host context has that same PID (if
any), thus bringing translations for that context into the TLB, which
Linux doesn't know about.
This can cause stale translations and subsequent crashes.
Fixing this in a way that is neither racy nor a huge performance
impact is difficult. We could just make the host invalidations always
use broadcast forms but that would hurt single threaded programs for
example.
We chose to fix it instead by partitioning the PID space between guest
and host. This is possible because today Linux only use 19 out of the
20 bits of PID space, so existing guests will work if we make the host
use the top half of the 20 bits space.
We additionally add support for a property to indicate to Linux the
size of the PID register which will be useful if we eventually have
processors with a larger PID space available.
There is still an issue with malicious guests purposefully setting the
PID register to a value in the hosts PID range. Hopefully future HW
can prevent that, but in the meantime, we handle it with a pair of
kludges:
- On the way out of a guest, before we clear the current VCPU in the
PACA, we check the PID and if it's outside of the permitted range
we flush the TLB for that PID.
- When context switching, if the mm is "new" on that CPU (the
corresponding bit was set for the first time in the mm cpumask), we
check if any sibling thread is in KVM (has a non-NULL VCPU pointer
in the PACA). If that is the case, we also flush the PID for that
CPU (core).
This second part is needed to handle the case where a process is
migrated (or starts a new pthread) on a sibling thread of the CPU
coming out of KVM, as there's a window where stale translations can
exist before we detect it and flush them out.
A future optimization could be added by keeping track of whether the
PID has ever been used and avoid doing that for completely fresh PIDs.
We could similarily mark PIDs that have been the subject of a global
invalidation as "fresh". But for now this will do.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop
unneeded include of kvm_book3s_asm.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Three small fixes. The transfer size fixes are actually correcting
some performance drops on the hpsa and smartpqi cards. The cards
actually have an internal cache for request speed up but bypass it for
transfers > 1MB. Since 4.3 the efficiency of our merges has rendered
the cache mostly unused, so limit transfers to under 1MB to recover
the cache boost.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJZd9JkAAoJEAVr7HOZEZN4vp0P/3jzI6VM/yZM/dVRRc0BizCQ
fsZRVTsin0FPnsztaA/S4aGIpSLFZE2TfF2AXEuwMw2hqGfvdF+7lrPkQb50j7a+
YP3M17hBN1J015BKm9lCN/fhVVCONxhZtnqxoXxiiRaakKkTuucC32NyAB85ans0
2OTh+fpodSQmPtX2bDU3bFx0AdSIX5aZgW2XhLBtosH9dRT/HrJ4svkIr3FVMBzV
CZD0YXqsush9xwZJJy2nkcW44yhL1xtcdN30YkWuSJOnITt6RgWGMhiTrZCa2sNR
LZSRkb47WohaNY9TR67NhsGv3z8FY3FhXO507SCs1HBZL/DIXVg+DDkF5pirAdR9
THLXvaNAFuYORgYum4UQJOqUM9a0lh/CWRYioQtQBlXNnvvvUE2fRRsgGGHU+G+D
9mMjUPGQhlLhOM/1h5OxGqnArcugb18LflBfPhfJ22XnK0KDj9c3CW68quNHLiBg
SGLZxUjlnHe1Ebe6T4UR1/fv/mp2LsIhXvQvFnfAqCp8ehj7wjl02R8CG0c4ldGu
4u4o4zLxHyz27sXpST0je89ceGaHVyCMmFyQ4xxUB61TPSaC52FGjxz2m8RQAaSm
fowc6niH8RtJ+v7EwDje/9BFOIVfn/Y/wKcSjKdV7kvh9zZQ7FB06sW7fhhUhqqh
IYLXDAo2AYis/FnL932c
=7jN6
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes.
The transfer size fixes are actually correcting some performance drops
on the hpsa and smartpqi cards. The cards actually have an internal
cache for request speed up but bypass it for transfers > 1MB. Since
4.3 the efficiency of our merges has rendered the cache mostly unused,
so limit transfers to under 1MB to recover the cache boost"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: smartpqi: limit transfer length to 1MB
scsi: hpsa: limit transfer length to 1MB
- add a missing "!" in the uuid tests
- remove the last remaining user of the uuid_be type, and then
the type and its helpers
-----BEGIN PGP SIGNATURE-----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=FeA7
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid
Pull uuid fixes from Christoph Hellwig:
- add a missing "!" in the uuid tests
- remove the last remaining user of the uuid_be type, and then the type
and its helpers
* tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid:
uuid: remove uuid_be
thunderbolt: use uuid_t instead of uuid_be
uuid: fix incorrect uuid_equal conversion in test_uuid_test
- split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool. (Vladimir Murzin).
-----BEGIN PGP SIGNATURE-----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=fJWP
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fixes from Christoph Hellwig:
"split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool (Vladimir Murzin)"
* tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping:
ARM: NOMMU: Wire-up default DMA interface
dma-coherent: introduce interface for default DMA pool
It's always bothered me that we only disable preemption in
copy_user_page around the call to flush_dcache_page_asm.
This patch extends this to after the copy.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
Helge noticed that we flush the TLB page in flush_cache_page but not in
flush_cache_range or flush_cache_mm.
For a long time, we have had random segmentation faults building
packages on machines with PA8800/8900 processors. These machines only
support equivalent aliases. We don't see these faults on machines that
don't require strict coherency. So, it appears TLB speculation
sometimes leads to cache corruption on machines that require coherency.
This patch adds TLB flushes to flush_cache_range and flush_cache_mm when
coherency is required. We only flush the TLB in flush_cache_page when
coherency is required.
The patch also optimizes flush_cache_range. It turns out we always have
the right context to use flush_user_dcache_range_asm and
flush_user_icache_range_asm.
The patch has been tested for some time on rp3440, rp3410 and A500-44.
It's been boot tested on c8000. No random segmentation faults were
observed during testing.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
Mic mute led does not work on HP ProBook 440 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
BugLink: https://bugs.launchpad.net/bugs/1705586
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If our device loses its connection for longer than the dead timeout we
will set NBD_DISCONNECTED in order to quickly fail any pending IO's that
flood in after the IO's that were waiting during the dead timer.
However if we re-connect at some point in the future we'll still see
this DISCONNECTED flag set if we then lose our connection again after
that, which means we won't get notifications for our newly lost
connections. Fix this by just clearing the DISCONNECTED flag on
reconnect in order to make sure everything works as it's supposed to.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some machines can't power off the machine, so disable the lockup detectors to
avoid this watchdog BUG to show up every few seconds:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1]
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
Thomas Gleixner