To allow channel switch announcements within beacons, add
the channel switch command to nl80211/cfg80211. This is
implementation is intended for AP and (later) IBSS mode.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a per-station debugfs file indicating the TIDs (as
a bitmap) that the driver has data buffered on.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The radiotap VHT info is 12 bytes (required to be aligned on 2) :
u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_*
u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_*
u8 bandwidth
u8 mcs_nss[4]
u8 coding
u8 group_id
u16 partial_aid
ATM mac80211 can handle IEEE80211_RADIOTAP_VHT_KNOWN_{GI,BANDWIDTH} and
mcs_nss[0] (i.e single user) in simple cases.
This is more a placeholder to let sniffers give more clues for VHT,
since we don't have yet the proper infrastructure/conventions
in mac80211 for complete feedback (e.g consider dynamic BW).
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A station which is not authorized has to be purged earlier
to give it a chance to re-try to establish an IBSS/RSN
session soon. Set the timeout to 10 seconds.
Some refactoring has also been done to allow the IBSS
submodule to have its own expiring function.
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change mac80211 LED trigger code to use the generic
led_trigger_blink_oneshot() API for transmit and receive activity
indication.
This gives a better feedback to the user, as with the new API each
activity event results in a visible blink, while a constant traffic
results in a continuous blink at constant rate.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
[fix LED disabled build error]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a driver (like hwsim) uses HW queue control an
active monitor vif needs to be used for the queues,
make the code do that. Otherwise we'd bail out and
drop the frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Set the Forwarding bit in Mesh Capability Info according
to dot11MeshForwarding as defined in IEEE 802.11-2012
section 8.4.2.100.8.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is an off-by-one error in the beacon generation for the ibss mode,
falsely a rate the extended supported rates which was already added to
supported rates, messing up the beacon. This was introduced by commit
"mac80211: select and adjust bitrates according to channel mode".
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There appear to be two regressions in ibss.c when calling
ieee80211_sta_def_wmm_params():
* the second argument should be a rate length, not a rate array. This
was introduced by my commit "mac80211: select and adjust bitrates
according to channel mode"
* the third argument is not initialized (anymore), making further
checks within this function useless.
Since ieee80211_sta_def_wmm_params() is only used by ibss anyway,
remove the function entirely and handle the operating mode decision
immediately.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Whether the wiphy supports it or not is already checked, so what is left
is to enable these channel types.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
This was originally designed to fail when a 40+/40- mode can not be
used, but basic modes (such as 5/10/20 MHz) must be handled
with an error.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Use a chandef instead of just the channel for scanning, and enable
5/10 Mhz scanning for IBSS mode. Also reporting is changed to the new
inform_bss functions.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Some regulations (like germany, but also FCC) express their transmission
power limit in dBm/MHz or mW/MHz. To cope with that and be on the safe
side, reduce the maximum power to half (10 MHz) or quarter (5 MHz)
when operating on these reduced bandwidth channels.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Mandatory rates for 5 and 10 MHz are different from the rates used for
20 MHz in 2.4 GHz mode, as they use OFDM only.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
The various components accessing the bitrates table must use consider
the used channel bandwidth to select only available rates or calculate
the bitrate correctly.
There are some rates in reduced bandwidth modes which can't be
represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The
standard suggests to round up to the next multiple of 500kbps, just do
that in mac80211 as well.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Wireshark already defines radiotap channel flags for 5 and 10 MHz, so
just use them in Linux radiotap too. Furthermore, add rx status flags to
allow drivers to report when they received data on 5 or 10 MHz channels.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
according to IEEE 802.11-2012 section 18, various timings change
when using 5 MHz and 10 MHz. Reflect this by using a "shift" when
calculating durations.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
5 and 10 MHz support needs to know the current operating channel width,
add the chandef to the rate control API.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
To allow scanning and working with 5 MHz and 10 MHz BSS, extend the
inform bss commands and add wrappers to take 5 and 10 MHz bss into
account.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
In most cases, host that receives IPv4 and IPv6 multicast/broadcast
packets does not do anything with these packets. Therefore the
reception of these unwanted packets causes unnecessary processing
and power consumption.
Packet coalesce feature helps to reduce number of received
interrupts to host by buffering these packets in firmware/hardware
for some predefined time. Received interrupt will be generated when
one of the following events occur.
a) Expiration of hardware timer whose expiration time is set to
maximum coalescing delay of matching coalesce rule.
b) Coalescing buffer in hardware reaches it's limit.
c) Packet doesn't match any of the configured coalesce rules.
This patch adds set/get configuration support for packet coalesce.
User needs to configure following parameters for creating a coalesce
rule.
a) Maximum coalescing delay
b) List of packet patterns which needs to be matched
c) Condition for coalescence. pattern 'match' or 'no match'
Multiple such rules can be created.
This feature needs to be advertised during driver initialization.
Drivers are supposed to do required firmware/hardware settings based
on user configuration.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
[fix kernel-doc, change free function, fix copy/paste error]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
When per-chain signal information is available, don't add
the antenna field once but instead add a radiotap namespace
for each chain containing the chain/antenna number and the
signal strength on that chain.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Currently packet patterns and it's enum/structures are used only
for WoWLAN feature. As we intend to reuse them for new feature
packet coalesce, they are renamed in this patch.
Older names are kept for backward compatibility purpose.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Pull more vfs stuff from Al Viro:
"O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
making simple_lookup() usable for filesystems with non-NULL s_d_op,
which allows us to get rid of quite a bit of ugliness"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sunrpc: now we can just set ->s_d_op
cgroup: we can use simple_lookup() now
efivarfs: we can use simple_lookup() now
make simple_lookup() usable for filesystems that set ->s_d_op
configfs: don't open-code d_alloc_name()
__rpc_lookup_create_exclusive: pass string instead of qstr
rpc_create_*_dir: don't bother with qstr
llist: llist_add() can use llist_add_batch()
llist: fix/simplify llist_add() and llist_add_batch()
fput: turn "list_head delayed_fput_list" into llist_head
fs/file_table.c:fput(): add comment
Safer ABI for O_TMPFILE
Pull networking fixes from David Miller:
"Just a bunch of small fixes and tidy ups:
1) Finish the "busy_poll" renames, from Eliezer Tamir.
2) Fix RCU stalls in IFB driver, from Ding Tianhong.
3) Linearize buffers properly in tun/macvtap zerocopy code.
4) Don't crash on rmmod in vxlan, from Pravin B Shelar.
5) Spinlock used before init in alx driver, from Maarten Lankhorst.
6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry
Kravkov.
7) Dummy and ifb driver load failure paths can oops, fixes from Tan
Xiaojun and Ding Tianhong.
8) Correct MTU calculations in IP tunnels, from Alexander Duyck.
9) Account all TCP retransmits in SNMP stats properly, from Yuchung
Cheng.
10) atl1e and via-rhine do not handle DMA mapping failures properly,
from Neil Horman.
11) Various equal-cost multipath route fixes in ipv6 from Hannes
Frederic Sowa"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
ipv6: only static routes qualify for equal cost multipathing
via-rhine: fix dma mapping errors
atl1e: fix dma mapping warnings
tcp: account all retransmit failures
usb/net/r815x: fix cast to restricted __le32
usb/net/r8152: fix integer overflow in expression
net: access page->private by using page_private
net: strict_strtoul is obsolete, use kstrtoul instead
drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe
drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe
drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe
net/usb: add relative mii functions for r815x
net/tipc: use %*phC to dump small buffers in hex form
qlcnic: Adding Maintainers.
gre: Fix MTU sizing check for gretap tunnels
pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts
pkt_sched: sch_qfq: improve efficiency of make_eligible
gso: Update tunnel segmentation to support Tx checksum offload
inet: fix spacing in assignment
ifb: fix oops when loading the ifb failed
...
Static routes in this case are non-expiring routes which did not get
configured by autoconf or by icmpv6 redirects.
To make sure we actually get an ecmp route while searching for the first
one in this fib6_node's leafs, also make sure it matches the ecmp route
assumptions.
v2:
a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF
already ensures that this route, even if added again without
RTF_EXPIRES (in case of a RA announcement with infinite timeout),
does not cause the rt6i_nsiblings logic to go wrong if a later RA
updates the expiration time later.
v3:
a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so,
because an pmtu event could update the RTF_EXPIRES flag and we would
not count this route, if another route joins this set. We now filter
only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that
don't get changed after rt6_info construction.
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change snmp RETRANSFAILS stat to include timeout retransmit failures
in addition to other loss recoveries.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of passing each byte by stack let's use nice specifier for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change fixes an MTU sizing issue seen with gretap tunnels when non-gso
packets are sent from the interface.
In my case I was able to reproduce the issue by simply sending a ping of
1421 bytes with the gretap interface created on a device with a standard
1500 mtu.
This fix is based on the fact that the tunnel mtu is already adjusted by
dev->hard_header_len so it would make sense that any packets being compared
against that mtu should also be adjusted by hard_header_len and the tunnel
header instead of just the tunnel header.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reported-by: Cong Wang <amwang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the forward declaration of qfq_update_agg_ts, by moving
the definition of the function above its first call. This patch also
removes a useless forward declaration of qfq_schedule_agg.
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
In make_eligible, a mask is used to decide which groups must become eligible:
the i-th group becomes eligible only if the i-th bit of the mask (from the
right) is set. The mask is computed by left-shifting a 1 by a given number of
places, and decrementing the result. The shift is performed on a ULL to avoid
problems in case the number of places to shift is higher than 31. On a 32-bit
machine, this is more costly than working on an UL. This patch replaces such a
costly operation with two cheaper branches.
The trick is based on the following fact: in case of a shift of at least 32
places, the resulting mask has at least the 32 less significant bits set,
whereas the total number of groups is lower than 32. As a consequence, in this
case it is enough to just set the 32 less significant bits of the mask with a
cheaper ~0UL. In the other case, the shift can be safely performed on a UL.
Reported-by: David S. Miller <davem@davemloft.net>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change makes it so that the GRE and VXLAN tunnels can make use of Tx
checksum offload support provided by some drivers via the hw_enc_features.
Without this fix enabling GSO means sacrificing Tx checksum offload and
this actually leads to a performance regression as shown below:
Utilization
Send
Throughput local GSO
10^6bits/s % S state
6276.51 8.39 enabled
7123.52 8.42 disabled
To resolve this it was necessary to address two items. First
netif_skb_features needed to be updated so that it would correctly handle
the Trans Ether Bridging protocol without impacting the need to check for
Q-in-Q tagging. To do this it was necessary to update harmonize_features
so that it used skb_network_protocol instead of just using the outer
protocol.
Second it was necessary to update the GRE and UDP tunnel segmentation
offloads so that they would reset the encapsulation bit and inner header
offsets after the offload was complete.
As a result of this change I have seen the following results on a interface
with Tx checksum enabled for encapsulated frames:
Utilization
Send
Throughput local GSO
10^6bits/s % S state
7123.52 8.42 disabled
8321.75 5.43 enabled
v2: Instead of replacing refrence to skb->protocol with
skb_network_protocol just replace the protocol reference in
harmonize_features to allow for double VLAN tag checks.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
- Fix an_rpc pipefs regression that causes a deadlock on mount
- Readdir optimisations by Scott Mayhew and Jeff Layton
- clean up the rpc_pipefs dentry operation setup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=NqQf
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull second set of NFS client updates from Trond Myklebust:
"This mainly contains some small readdir optimisations that had
dependencies on Al Viro's readdir rewrite. There is also a fix for a
nasty deadlock which surfaced earlier in this merge window.
Highlights include:
- Fix an_rpc pipefs regression that causes a deadlock on mount
- Readdir optimisations by Scott Mayhew and Jeff Layton
- clean up the rpc_pipefs dentry operation setup"
* tag 'nfs-for-3.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix a deadlock in rpc_client_register()
rpc_pipe: rpc_dir_inode_operations can be static
NFS: Allow nfs_updatepage to extend a write under additional circumstances
NFS: Make nfs_readdir revalidate less often
NFS: Make nfs_attribute_cache_expired() non-static
rpc_pipe: set dentry operations at d_alloc time
nfs: set verifier on existing dentries in nfs_prime_dcache
This is a follow-up patch to 3630d40067
("ipv6: rt6_check_neigh should successfully verify neigh if no NUD
information are available").
Since the removal of rt->n in rt6_info we can end up with a dst ==
NULL in rt6_check_neigh. In case the kernel is not compiled with
CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown
NUD state but we must not avoid doing round robin selection on routes
with the same target. So introduce and pass down a boolean ``do_rr'' to
indicate when we should update rt->rr_ptr. As soon as no route is valid
we do backtracking and do a lookup on a higher level in the fib trie.
v2:
a) Improved rt6_check_neigh logic (no need to create neighbour there)
and documented return values.
v3:
a) Introduce enum rt6_nud_state to get rid of the magic numbers
(thanks to David Miller).
b) Update and shorten commit message a bit to actualy reflect
the source.
Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several of these patches were rebased in order to correct style issues.
Only stylistic changes were made versus the patches which were in linux-next
for two weeks. The rebases have been in linux-next for 3 days and have
passed my regressions.
The bulk of these are RDMA fixes and improvements. There's also some
additions on the extended attributes front to support some additional
namespaces and a new option for TCP to force allocation of mount requests
from a priviledged port.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: GPGTools - http://gpgtools.org
iQIcBAABAgAGBQJR3rWXAAoJEDZk62b0Tg6xabIP/12I+SkQ57wRN03EQy5fqUdX
gK/YMHKQ9QuDnZPBvrZ2lypesQNqVU0KINay6VEA86JG1gwzPyUd2MnpQ7F0vV3N
XwVD54IoflV/M74xUnrgGWB8YxaPcdacQQ8yazX+mEgOgYGdWmDAl7FHmAkdKAFB
gSl25f3PNJX1Rjay0dssNVXrVPXuJY/fZXKnNQZKtRwXffRWKsWHd8FU0Eq7F30A
kNQB8tmMSfHBBjP+tzR0My6/kQ09jzHdtZOkH9IgVpNzqrd8tfy0l6tEvFypxqGT
5oQFoxHHL/tUW05V0P3gYany2A7lEhSUifPKS6omqHO+vPlw+pDJw+xWlNq9fnDt
8S8znqVuEHhvqRQW7zFdb9ac2MZi8CHHhC2wGIZ7GYjNG2q5XwE8b/QhdXQeFin7
ibugvoW7+ZdcDewpQW27oO0g7B/8hRt8KC+1lc/8rITKIfGxbNJkGzTDl0F4Co7v
IH7Ew5PHPe6ZiuU0QSdU+NBuvk8g8sWGxx04Xvzl3WicwOg7XvN3ivrKB9oN2U1x
50KZRnYpwQQv/9AxyhroYU+Ufje8SF4v++zsq1eMzUcHsC/C73eatw2m764t+X4S
8yMLrgqY1Nzif4nAMi/SDMnB/R1bXeuc8kXD9xT6XD9d2tf6e+zCHhQklVeC0tuK
RiVRJqGrfanbKMnWIG0Y
=n9rI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-3.11-merge-window-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull second round of 9p patches from Eric Van Hensbergen:
"Several of these patches were rebased in order to correct style
issues. Only stylistic changes were made versus the patches which
were in linux-next for two weeks. The rebases have been in linux-next
for 3 days and have passed my regressions.
The bulk of these are RDMA fixes and improvements. There's also some
additions on the extended attributes front to support some additional
namespaces and a new option for TCP to force allocation of mount
requests from a priviledged port"
* tag 'for-linus-3.11-merge-window-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Remove the unused variable "err" in v9fs_vfs_getattr()
9P: Add cancelled() to the transport functions.
9P/RDMA: count posted buffers without a pending request
9P/RDMA: Improve error handling in rdma_request
9P/RDMA: Do not free req->rc in error handling in rdma_request()
9P/RDMA: Use a semaphore to protect the RQ
9P/RDMA: Protect against duplicate replies
9P/RDMA: increase P9_RDMA_MAXSIZE to 1MB
9pnet: refactor struct p9_fcall alloc code
9P/RDMA: rdma_request() needs not allocate req->rc
9P: Fix fcall allocation for rdma
fs/9p: xattr: add trusted and security namespaces
net/9p: add privport option to 9p tcp transport
Pull nfsd changes from Bruce Fields:
"Changes this time include:
- 4.1 enabled on the server by default: the last 4.1-specific issues
I know of are fixed, so we're not going to find the rest of the
bugs without more exposure.
- Experimental support for NFSv4.2 MAC Labeling (to allow running
selinux over NFS), from Dave Quigley.
- Fixes for some delicate cache/upcall races that could cause rare
server hangs; thanks to Neil Brown and Bodo Stroesser for extreme
debugging persistence.
- Fixes for some bugs found at the recent NFS bakeathon, mostly v4
and v4.1-specific, but also a generic bug handling fragmented rpc
calls"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux: (31 commits)
nfsd4: support minorversion 1 by default
nfsd4: allow destroy_session over destroyed session
svcrpc: fix failures to handle -1 uid's
sunrpc: Don't schedule an upcall on a replaced cache entry.
net/sunrpc: xpt_auth_cache should be ignored when expired.
sunrpc/cache: ensure items removed from cache do not have pending upcalls.
sunrpc/cache: use cache_fresh_unlocked consistently and correctly.
sunrpc/cache: remove races with queuing an upcall.
nfsd4: return delegation immediately if lease fails
nfsd4: do not throw away 4.1 lock state on last unlock
nfsd4: delegation-based open reclaims should bypass permissions
svcrpc: don't error out on small tcp fragment
svcrpc: fix handling of too-short rpc's
nfsd4: minor read_buf cleanup
nfsd4: fix decoding of compounds across page boundaries
nfsd4: clean up nfs4_open_delegation
NFSD: Don't give out read delegations on creates
nfsd4: allow client to send no cb_sec flavors
nfsd4: fail attempts to request gss on the backchannel
nfsd4: implement minimal SP4_MACH_CRED
...
Rename LL_SO to BUSY_POLL_SO
Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll}
Fix up users of these variables.
Fix documentation for sysctl.
a patch for the socket.7 man page will follow separately,
because of limitations of my mail setup.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename ndo_ll_poll to ndo_busy_poll.
Rename sk_mark_ll to sk_mark_napi_id.
Rename skb_mark_ll to skb_mark_napi_id.
Correct all useres of these functions.
Update comments and defines in include/net/busy_poll.h
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the file and correct all the places where it is included.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 384816051c (SUNRPC: fix races on
PipeFS MOUNT notifications) introduces a regression when we call
rpc_setup_pipedir() with RPCSEC_GSS as the auth flavour.
By calling rpcauth_create() while holding the sn->pipefs_sb_lock, we
end up deadlocking in gss_pipes_dentries_create_net().
Fix is to register the client and release the mutex before calling
rpcauth_create().
Reported-by: Weston Andros Adamson <dros@netapp.com>
Tested-by: Weston Andros Adamson <dros@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: <stable@vger.kernel.org> # : 3848160: SUNRPC: fix races on PipeFS MOUNT
Cc: <stable@vger.kernel.org> # : e73f4cc: SUNRPC: split client creation
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi Jeff,
FYI, there are new sparse warnings show up in
tree: git://git.linux-nfs.org/projects/trondmy/linux-nfs.git nfs-for-next
head: 296afe1f58d55fd56ed85daaafafcfee39f59ece
commit: 76fa666579 [2/5] rpc_pipe: set dentry operations at d_alloc time
>> net/sunrpc/rpc_pipe.c:496:31: sparse: symbol 'rpc_dir_inode_operations' was not declared. Should it be static?
Please consider folding the attached diff :-)
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Simon Wunderlich