The function name 'ipu_dmfc_config_wait4eot' matches the implementation of
the function better than 'ipu_dmfc_init_channel', since it only touches the
wait4eot bits.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since the function ipu_dmfc_init_channel() always returns zero, we may
change the return type to void to simplify the code.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
To avoid race condition issue, we should protect the function
ipu_dmfc_init_channel() with the mutex dmfc->priv->mutex, since it
configures the register DMFC_GENERAL1 at runtime which contains
several control bits for various display channels. This matches
better with fine grained locking logic in upper layer.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Let ipu_cpmem_set_yuv_planar_full take a DRM_FORMAT instead of a
V4L2_PIXFMT and allow better control over U/V stride, U offset and
V offset settings in the CPMEM.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This cleans up the display controller microcode setup in ipu_dc_init_sync
a little bit. The microcode template words for DI0 and DI1 are properly
separated to avoid a clash when DI1 is active in interlaced mode at the
same time as DI0 in non-interlaced mode.
A comment is added to explain the meaning of the sync counter.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If we don't come out of a clean reset, make sure no IRQ is fired before
everything is setup by resetting the IPU before activating the interrupt
handlers.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The port nodes are documented as optional, treat them accordingly.
Reported-by: Martin Fuzzey <mfuzzey@parkeon.com>
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes: 304e6be652 ("gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports")
* patchwork: (204 commits)
[media] rc: sunxi-cir: Initialize the spinlock properly
[media] rtl2832: do not filter out slave TS null packets
[media] rtl2832: print reg number on error case
[media] rtl28xxu: return demod reg page from driver cache
[media] coda: enable MPEG-2 ES decoding
[media] coda: don't start streaming without queued buffers
[media] coda: hook up vidioc_prepare_buf
[media] coda: relax coda_jpeg_check_buffer for trailing bytes
[media] coda: make to_coda_video_device static
[media] s5p-mfc: remove volatile attribute from MFC register addresses
[media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
[media] s5p-mfc: use spinlock to protect MFC context
[media] s5p-mfc: remove unnecessary callbacks
[media] s5p-mfc: make queue cleanup code common
[media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
[media] s5p-mfc: constify s5p_mfc_codec_ops structures
[media] au8522: Avoid memory leak for device config data
[media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
[media] uvcvideo: small cleanup in uvc_video_clock_update()
[media] uvcvideo: Fix reading the current exposure value of UVC
...
While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.
As we're planning to drop pure http support on some
future, change the references at DRM include and at
the ipu-v3 driver to point to the https://linuxtv.org
URL instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The crtc child device driver shouldn't have to modify the of_node of its
platform device in the probe function. Instead, let the IPU core driver
set the of_node when the platform device is created.
Also reorder the client_reg array so the elements are in port id order
(CSIs first, then DIs).
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
- Some correctness fixes found by coccinelle
- Add drivers/gpu/ipu-v3 directory to MAINTAINERS
- Add support for more color formats
- Fix a regression, making displays larger than FullHD work again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EqNE
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-10-30' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm fixes and color format updates
- Some correctness fixes found by coccinelle
- Add drivers/gpu/ipu-v3 directory to MAINTAINERS
- Add support for more color formats
- Fix a regression, making displays larger than FullHD work again
* tag 'imx-drm-next-2015-10-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: hdmi: fix HDMI setup to allow modes larger than FullHD
gpu: ipu-v3: fix div_ratio type
gpu: ipu-v3: csi: add support for 8 bpp grayscale sensors.
drm/imx: enable ARGB4444 16-bit color format
gpu: ipu-v3: add support for ARGB4444 16-bit color format
drm/imx: ipuv3-plane: enable support for RGBX8888 and RGBA8888 pixel formats
gpu: ipu-v3: add support for RGBX8888 and RGBA8888 pixel formats
drm/imx: enable 15-bit RGB with 1-bit alpha formats
gpu: ipu-v3: add support for 15-bit RGB with 1-bit alpha formats
MAINTAINERS: Add IPUv3 core driver to the i.MX DRM driver section
gpu: ipu-v3: ipu-csi: bool test doesn't need a comparison to false
The variable can be negative.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch adds support for the ARGB4444 color format.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Bool initializations should use true and false. Bool tests don't need
comparisons. Based on contributions from Joe Perches, Rusty Russell
and Bruce W Allan.
The semantic patch that makes this change is available
in scripts/coccinelle/misc/boolinit.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The support for interlaced video modes seems to be broken; we don't use
anything other than the vtotal/htotal from the timing information to
define the various sync counters.
Freescale patches for interlaced video support contain an alternative
sync counter setup, which we include here. This setup produces the
hsync and vsync via the normal counter 2 and 3, but moves the display
enable signal from counter 5 to counter 6. Therefore, we need to
change the display controller setup as well.
The corresponding Freescale patches for this change are:
iMX6-HDMI-support-interlaced-display-mode.patch
IPU-fine-tuning-the-interlace-display-timing-for-CEA.patch
This produces a working interlace format output from the IPU.
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use a function to convert the sync pin to a bit mask for the DI_GENERAL
register, and move this out of the interlace/non-interlace path to the
common path.
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN
For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.
Remove the argument.
Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
This time we have aded a new capability for scatter-gathered memset using
dmaengine APIs. This is supported in xdmac & hdmac drivers
We have added support for reusing descriptors for examples like video
buffers etc. Driver will follow
The behaviour of descriptor ack has been clarified and documented
New devices added are:
- dma controller in sun[457]i SoCs
- lpc18xx dmamux
- ZTE ZX296702 dma controller
- Analog Devices AXI-DMAC DMA controller
- eDMA support for dma-crossbar
- imx6sx support in imx-sdma driver
- imx-sdma device to device support
Others
- jz4780 fixes
- ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is
deprecated and fixes
- ACPI support in X-Gene DMA engine driver
- ipu irq fixes
- mvxor fixes
- minor fixes spread thru drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gQZ6
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have aded a new capability for scatter-gathered memset
using dmaengine APIs. This is supported in xdmac & hdmac drivers
We have added support for reusing descriptors for examples like video
buffers etc. Driver will follow
The behaviour of descriptor ack has been clarified and documented
New devices added are:
- dma controller in sun[457]i SoCs
- lpc18xx dmamux
- ZTE ZX296702 dma controller
- Analog Devices AXI-DMAC DMA controller
- eDMA support for dma-crossbar
- imx6sx support in imx-sdma driver
- imx-sdma device to device support
Other:
- jz4780 fixes
- ioatdma large refactor and cleanup for removal of ioat v1 and v2
which is deprecated and fixes
- ACPI support in X-Gene DMA engine driver
- ipu irq fixes
- mvxor fixes
- minor fixes spread thru drivers"
[ The Kconfig and Makefile entries got re-sorted alphabetically, and I
handled the conflict with the new Intel integrated IDMA driver by
slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in
order to keep the Intel entries together. I think it might be a good
idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make
the sorting be a true sort, not this mismash.
Also, this merge disables the COMPILE_TEST for the sun4i DMA
controller, because it does not compile cleanly at all. - Linus ]
* tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs
dmaengine :ipu: change ipu_irq_handler() to remove compile warning
dmaengine: ioatdma: Fix variable array length
dmaengine: ioatdma: fix sparse "error" with prep lock
dmaengine: hdmac: Add memset capabilities
dmaengine: sort the sh Makefile
dmaengine: sort the sh Kconfig
dmaengine: sort the dw Kconfig
dmaengine: sort the Kconfig
dmaengine: sort the makefile
drivers/dma: make mv_xor.c driver explicitly non-modular
dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller
devicetree: Add bindings documentation for Analog Devices AXI-DMAC
dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests
dmaengine: ioatdma: fix coccinelle warning
dmaengine: ioatdma: fix zero day warning on incompatible pointer type
dmaengine: tegra-apb: Simplify locking for device using global pause
dmaengine: tegra-apb: Remove unnecessary return statements and variables
dmaengine: tegra-apb: Avoid unnecessary channel base address calculation
dmaengine: tegra-apb: Remove unused variables
...
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.
This is also a preparation for the removal of the 'irq' argument from
interrupt flow handlers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Even with the oops fixed by a previous patch, the system still fails to
kexec, due to a stuck chained interrupt locking the system. We must
disable the child interrupts prior to setting up the irq chip to ensure
we don't get stuck here.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPU code was installing its chained interrupt handler (which enables
the interrupt) before it was setting its data, which provokes an oops on
kexec. Fix this by converting to irq_set_chained_handler_and_data().
[drm] Initialized drm 1.1.0 20060810
imx-drm display-subsystem: parent device of /soc/aips-bus@02000000/ldb@020e0008/lvds-channel@1 is not available
imx-drm display-subsystem: parent device of /soc/aips-bus@02000000/ldb@020e0008/lvds-channel@1 is not available
Unable to handle kernel NULL pointer dereference at virtual address 00000070
pgd = c0004000
[00000070] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc6+ #1693
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: d74c0000 ti: d74aa000 task.ti: d74aa000
PC is at ipu_irq_handle+0x28/0xd8
LR is at ipu_irq_handler+0x6c/0xc0
pc : [<c03c56d8>] lr : [<c03c58a4>] psr: 200001d3
sp : d74abbd0 ip : d74abc00 fp : d74abbfc
r10: 000001e0 r9 : c0085154 r8 : 00000009
r7 : 00000000 r6 : 00000000 r5 : d74abc04 r4 : c0a6b6a8
r3 : 00000000 r2 : 00000009 r1 : d74abc04 r0 : 00000000
Flags: nzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 10004059 DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xd74aa210)
Stack: (0xd74abbd0 to 0xd74ac000)
Backtrace:
[<c03c56b0>] (ipu_irq_handle) from [<c03c58a4>] (ipu_irq_handler+0x6c/0xc0)
[<c03c5838>] (ipu_irq_handler) from [<c0080154>] (generic_handle_irq+0x28/0x38)
[<c008012c>] (generic_handle_irq) from [<c0080288>] (__handle_domain_irq+0x5c/0xb8)
[<c008022c>] (__handle_domain_irq) from [<c0009428>] (gic_handle_irq+0x28/0x68)
[<c0009400>] (gic_handle_irq) from [<c0013dc4>] (__irq_svc+0x44/0x5c)
[<c07638fc>] (_raw_spin_unlock_irqrestore) from [<c00803bc>] (__irq_put_desc_unlock+0x1c/0x40)
[<c00803a0>] (__irq_put_desc_unlock) from [<c00841f4>] (__irq_set_handler+0x54/0x5c)
[<c00841a0>] (__irq_set_handler) from [<c03c5f48>] (ipu_probe+0x29c/0x708)
[<c03c5cac>] (ipu_probe) from [<c03d3848>] (platform_drv_probe+0x50/0xac)
[<c03d37f8>] (platform_drv_probe) from [<c03d1f3c>] (driver_probe_device+0x1d4/0x278)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z02-0002SI-Br@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
on the internal parallel bus between display interface and
encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
determine the bus pixel format from the panel descriptor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVGnvrAAoJEFDCiBxwnmDrnXwP/RrkQjc9lluHJXJFN0gSE2vv
+xKhZ4fPAkQECcHUFcSaL3mZiwQr2wym6kMR8j2ivj/EpJjfMsy91M+6yiwrMfyb
Ccp6750LLljvQnUBayjHKMA55p9p+59wihFU26jCLzMB/30fJjqRtvQXwI3I4l2+
ZKOaoeq+EubWfGKe3yVGqZB8p+DS4BvMwnXLrv2IF9ONRE7E24p6beKM1D5PFBPQ
C5ZJ+BusMIyessgd7iNuIKJPkhZWjcgzSqfB3NiHxOB1FMCLpaGC8LcP/XKzqeQn
cKBlAzxGhZucOshS217G6cK5C7ELTSEWP+CbFbIBOHyaiY0pVgW5AfKVUgPQK7+l
50o8xQWQAZvzUIjGMPkhoELEW1mXmGDUksdae9rhr7/e6m/t8xBPvyxgMB70QEsL
q0YL7XJzmLugTeSSABZBG/4GFfiOmaVP8ANUM9Kg6lOAVTS5NiVzlUrEukv4tppo
VMQWBc8ot0woqZUlwlP1OJ2Z8lU2aT3px7BnZVu/VWIrNfJX5H9+Q4w57HqaYeqF
lmuW9R/R/RulQiEVG36g91VYOsfE2bB7QlAums0jxTZu84fhy7BIOhdBzUdC+xO1
yihgSkuNQPXvtIboIuUvQ/qc3G9fDlnlP78OfVdOn6uY+XSWAKiLs914xcQHphT/
ZlVJkXAKk1WzKyVeghL2
=nTVr
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm changes to use media bus formats and LDB drm_panel support
- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
on the internal parallel bus between display interface and
encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
determine the bus pixel format from the panel descriptor.
* tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
drm/imx: imx-ldb: allow to determine bus format from the connected panel
drm/imx: imx-ldb: reset display clock input when disabling LVDS
drm/imx: imx-ldb: add drm_panel support
drm/imx: consolidate bus format variable names
drm/imx: switch to use media bus formats
Add RGB666_1X24_CPADHI media bus format
Add YUV8_1X24 media bus format
Add BGR888_1X24 and GBR888_1X24 media bus formats
Add LVDS RGB media bus formats
Add RGB444_1X12 and RGB565_1X16 media bus formats
drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2
drm/imx: Add support for interlaced scanout
The value for downsizing 8:1 is marked as reserved in the technical reference
manual and the documentation states downsizing capability up to 4:1 only.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The DI pixel clock divider bit field is only 8 bits wide for the
integer part, so limit the divider to the 1...255 interval before
deciding whether the internal clock can be used and before writing
to the register.
Reported-by: Felix Mellmann <felix.mellmann@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Even if an unsupported mode with a pixel clock larger than two times the
264 MHz IPU HSP clock is set, don't divide by zero.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
- Corrected handling of wait_for_completion_timeout return value
when disabling IPUv3 DC channels
- Fixed error return value propagation in TVE mode_set
- Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tRBf
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm fixes for IPUv3 DC and i.MX5 IPUv3 IC and TVE
- Corrected handling of wait_for_completion_timeout return value
when disabling IPUv3 DC channels
- Fixed error return value propagation in TVE mode_set
- Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53
* tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Fix IC control register offset
drm: imx: imx-tve: Check and propagate the errors
gpu: ipu-v3: wait_for_completion_timeout does not return negative status
The IC register offset is at +0x20000 relative to the control module
registers on all IPUv3 versions. This patch fixes wrong values for
i.MX51 and i.MX53.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This fixes up the return value handling and the return type.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We can use the DIV_ROUND_CLOSEST() macro when calculating the DI
clock divider, rounded to nearest int.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch changes struct ipu_di_signal_cfg to use struct videomode
to define video timings and flags.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
h_total and v_total were calculated in ipu_di_init_sync_panel()
but never actually used. Remove.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).
The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The functions ipu_dc_enable() and ipu_dc_disable() enable/disable the DC
globally in the IPU_CONF register, but the DC is used by multiple clients
on different DC channels. So make sure to only disable/enable the DC
globally based on a use counter.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed enum values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
Reference new definitions in the ipu-v3 driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
SOC_IMX6SL does not have the IPU block, so remove it from the Kconfig entry.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_dump() which dumps IPU register state to debug.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_dump() which dumps a channel's cpmem to debug.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds support for the following planar and partial-planar formats:
YUV422
NV12
NV16
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Mohsin Kazmi <mohsin_kazmi@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Unified base offset and Y plane offset into a single variable,
moved all ipu_cpmem_set_buffer calls to a single location.
Removed NV21 and NV61 for now. The IDMAC doesn't understand U/V
order for chroma interleaved formats, so we'd need to work around
this by implenting U/V switching via the CSC unit.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a second buffer physaddr to struct ipu_image, for double-buffering
support.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_set_axi_id() to set which AXI bus master the channel
will use to transfer data onto AXI bus.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Liu Ying