'chan_name' is malloced in imx_scu_probe() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: edbee095fa ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The decompressor can load from anywhere in memory, and the only reason
the EFI stub code relocates it is to ensure it appears within the first
128 MiB of memory, so that the uncompressed kernel ends up at the right
offset in memory.
We can short circuit this, and simply jump into the decompressor startup
code at the point where it knows where the base of memory lives. This
also means there is no need to disable the MMU and caches, create new
page tables and re-enable them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
If we get an invalid conversion specifier, bail out instead of trying to
fix it up. The format string likely has a typo or assumed we support
something that we don't, in either case the remaining arguments won't
match up with the remaining format string.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-16-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Consolidate the actual output of the formatted text into one place.
Fix a couple of edge cases:
1. If 0 is printed with a precision of 0, the printf specification says
that nothing should be output, with one exception (2b).
2. The specification for octal alternate format (%#o) adds the leading
zero not as a prefix as the 0x for hexadecimal is, but by increasing
the precision if necessary to add the zero. This means that
a. %#.2o turns 8 into "010", but 1 into "01" rather than "001".
b. %#.o prints 0 as "0" rather than "", unlike the situation for
decimal, hexadecimal and regular octal format, which all output an
empty string.
Reduce the space allocated for printing a number to the maximum actually
required (22 bytes for a 64-bit number in octal), instead of the 66
bytes previously allocated.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-15-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A negative precision should be ignored completely, and the presence of a
valid precision should turn off the 0 flag.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move flags parsing code out into a helper function.
The '%%' case can be handled up front: it is not allowed to have flags,
width etc.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-9-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Support 'll' qualifier for long long by copying the decimal printing
code from lib/vsprintf.c. For simplicity, the 32-bit code is used on
64-bit architectures as well.
Support 'hh' qualifier for signed/unsigned char type integers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-8-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reclaim the bloat from the addition of printf by optimizing the stub for
size. With gcc 9, the text size of the stub is:
ARCH before +printf -Os
arm 35197 37889 34638
arm64 34883 38159 34479
i386 18571 21657 17025
x86_64 25677 29328 22144
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-6-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Copy vsprintf from arch/x86/boot/printf.c to get a simple printf
implementation.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-5-nivedita@alum.mit.edu
[ardb: add some missing braces in if...else clauses]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use a buffer to convert the string to UTF-16. This will reduce the
number of firmware calls required to print the string from one per
character to one per string in most cases.
Cast the input char to unsigned char before converting to efi_char16_t
to avoid sign-extension in case there are any non-ASCII characters in
the input.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
These functions do not support formatting, unlike printk. Rename them to
puts to make that clear.
Move the implementations of these two functions next to each other.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add #include directives for include files that efistub.h depends on,
instead of relying on them having been included by the C source files
prior to efistub.h.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This fixes the boot issues since 5.3 on several Dell models when the TPM
is enabled. Depending on the exact grub binary, booting the kernel would
freeze early, or just report an error parsing the final events log.
We get an event log in the SHA-1 format, which doesn't have a
tcg_efi_specid_event_head in the first event, and there is a final events
table which doesn't match the crypto agile format.
__calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and
either fails, or loops long enough for the machine to be appear frozen.
So we now only parse the final events table, which is per the spec always
supposed to be in the crypto agile format, when we got a event log in this
format.
Fixes: c46f340569 ("tpm: Reserve the TPM final events table")
Fixes: 166a2809d6 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611
Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com>
Link: https://lore.kernel.org/r/20200512040113.277768-1-loic.yhuel@gmail.com
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Matthew Garrett <mjg59@google.com>
[ardb: warn when final events table is missing or in the wrong format]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull up arch-specific prototype efi_systab_show_arch() in order to
fix a -Wmissing-prototypes warning:
arch/x86/platform/efi/efi.c:957:7: warning: no previous prototype for
‘efi_systab_show_arch’ [-Wmissing-prototypes]
char *efi_systab_show_arch(char *str)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Link: https://lore.kernel.org/r/20200516132647.14568-1-b.thiel@posteo.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
-----BEGIN PGP SIGNATURE-----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=7XEQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
ARM: tegra: Core changes for v5.8-rc1
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
ARM: tegra: Correct PL310 Auxiliary Control Register initialization
ARM: tegra: Do not fully reinitialize L2 on resume
ARM: tegra: Initialize r0 register for firmware wake-up
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-10-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Shadow stacks are not available in the EFI stub, filter out SCS flags.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
If 'mfd_add_devices()' fails, we must undo 'zynqmp_pm_api_debugfs_init()'
otherwise some debugfs directory and files will be left.
Just move the call to 'zynqmp_pm_api_debugfs_init()' a few lines below to
fix the issue.
Fixes: e23d9c6d0d ("drivers: soc: xilinx: Add ZynqMP power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/20200510130357.233364-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While debugging a boot failure, the following unknown error record was
seen in the boot logs.
<...>
BERT: Error records from previous boot:
[Hardware Error]: event severity: fatal
[Hardware Error]: Error 0, type: fatal
[Hardware Error]: section type: unknown, 81212a96-09ed-4996-9471-8d729c8e69ed
[Hardware Error]: section length: 0x290
[Hardware Error]: 00000000: 00000001 00000000 00000000 00020002 ................
[Hardware Error]: 00000010: 00020002 0000001f 00000320 00000000 ........ .......
[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
[Hardware Error]: 00000030: 00000000 00000000 00000000 00000000 ................
<...>
On further investigation, it was found that the error record with
UUID (81212a96-09ed-4996-9471-8d729c8e69ed) has been defined in the
UEFI Specification at least since v2.4 and has recently had additional
fields defined in v2.7 Section N.2.10 Firmware Error Record Reference.
Add support for parsing and printing the defined fields to give users
a chance to figure out what went wrong.
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20200512045502.3810339-1-punit1.agrawal@toshiba.co.jp
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In allocate_e820(), call the EFI get_memory_map() service directly
instead of indirectly via efi_get_memory_map(). This avoids allocation
of a buffer and return of the full EFI memory map, which is not needed
here and would otherwise need to be freed.
Routine allocate_e820() only needs to know how many EFI memory
descriptors there are in the map to allocate an adequately sized
e820ext buffer, if it's needed. Note that since efi_get_memory_map()
returns a memory map buffer sized with extra headroom, allocate_e820()
now needs to explicitly factor that into the e820ext size calculation.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideoCore. Inform VideoCore that VL805 was just reset.
Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface, and since USB_PCI can't be set as a module neither
this can. Reflect that on the firmware interface Kconfg.
Link: https://lore.kernel.org/r/20200505161318.26200-5-nsaenzjulienne@suse.de
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
that implements xHCI. After a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
firmware load logic and the VL805 firmware blob. The function this patch
introduces triggers the aforementioned process.
Link: https://lore.kernel.org/r/20200505161318.26200-3-nsaenzjulienne@suse.de
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200508210805.GA24170@embeddedor
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When I play with terminus fonts I noticed the efi early printk does
not work because the earlycon code assumes font width is 8.
Here add the code to adapt with larger fonts. Tested with all kinds
of kernel built-in fonts on my laptop. Also tested with a local draft
patch for 14x28 !bold terminus font.
Signed-off-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/r/20200412024927.GA6884@dhcp-128-65.nay.redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before. Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.
The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:
Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()
So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_ARM_PSCI_FW is disabled but CONFIG_HAVE_ARM_SMCCC is enabled,
arm-scmi runs into a link failure:
arm-linux-gnueabi-ld: drivers/firmware/arm_scmi/smc.o: in function `smc_send_message':
smc.c:(.text+0x200): undefined reference to `arm_smccc_1_1_get_conduit'
Change from HAVE_ARM_SMCCC to ARM_PSCI_FW config dependency for now.
We rely on PSCI bindings anyways for the conduit and this should be
fine.
Link: https://lore.kernel.org/r/20200507144905.11397-1-sudeep.holla@arm.com
Fixes: 1dc6558062 ("firmware: arm_scmi: Add smc/hvc transport")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To help the compiler figure out that efi_printk() will not modify
the string it is given, make the input argument type const char*.
While at it, simplify the implementation as well.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:
STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.
So force the compiler not to emit these sections, by passing the
appropriate command line option.
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
22090f84bc ("efi/libstub: unify EFI call wrappers for non-x86")
refactored the macros that are used to provide wrappers for mixed-mode
calls on x86, allowing us to boot a 64-bit kernel on 32-bit firmware.
Unfortunately, this broke mixed mode boot due to the fact that
efi_is_native() is not a macro on x86.
All of these macros should go together, so rather than testing each one
to see if it is defined, condition the generic macro definitions on a
new ARCH_HAS_EFISTUB_WRAPPERS, and remove the wrapper definitions on x86
as well if CONFIG_EFI_MIXED is not enabled.
Fixes: 22090f84bc ("efi/libstub: unify EFI call wrappers for non-x86")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200504150248.62482-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As with most of the drivers, let us register this driver unconditionally
by dropping the checks for presence of firmware nodes(DT) or entries(ACPI).
Further, as mentioned in the commit acafce48b0 ("firmware: arm_sdei:
Fix DT platform device creation"), the core takes care of creation of
platform device when the appropriate device node is found and probe
is called accordingly.
Let us check only for the presence of ACPI firmware entry before creating
the platform device and flag warning if we fail.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200422122823.1390-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When building arm64 allmodconfig:
ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined!
ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined!
These functions were added to drivers/fpga/zynqmp-fpga.c but not
exported so the module build breaks. Export them so that they can be
used in modules properly.
Fixes: 4db8180ffe ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200502025958.2714249-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efi_parse_options can fail if it is unable to allocate space for a copy
of the command line. Check the return value to make sure it succeeded.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-12-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Factor out the initrd loading into a common function that can be called
both from the generic efi-stub.c and the x86-specific x86-stub.c.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Rename pr_efi to efi_info and pr_efi_err to efi_err to make it more
obvious that they are part of the EFI stub and not generic printk infra.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In several places 64-bit values need to be split up into two 32-bit
fields, in order to be backward-compatible with the old 32-bit ABIs.
Instead of open-coding this, add a helper function to set a 64-bit value
as two 32-bit fields.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
struct boot_params is only 4096 bytes, not 16384. Fix this by using
sizeof(struct boot_params) instead of hardcoding the incorrect value.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently, setup_graphics() ignores the return value of efi_setup_gop(). As
AllocatePool() does not zero out memory, the screen information table will
contain uninitialized data in this case.
We should free the screen information table if efi_setup_gop() returns an
error code.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200426194946.112768-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add sysfs interface to set boot health status from user space.
Add API used by this interface to communicate with firmware.
If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux shutdown functionality implemented via PSCI system_off does
not include an option to set a scope, i.e. which parts of the system to
shut down.
This patch creates sysfs that allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the platform
specific portion of PSCI-system_off can use the chosen shutdown scope.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add system shutdown API interface which asks firmware to
perform system shutdown/restart.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add firmware-ggs sysfs interface which provides read/write
interface to global storage registers.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for
clock_getdivider.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for
clock_setdivider.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function calls instead of using eemi ops. So remove
eemi ops for get_api_version and use direct function call.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel service layer driver has defined error codes for the
specific services, which started from FPGA configuration then RSU
(Remote Status Update).
Intel service layer driver should define the standard error codes
rather than keep adding more error codes for the new services.
The standard error codes will be used by all the clients of Intel service
layer driver.
Replace FPGA and RSU specific error codes with Intel service layer’s
Common error codes.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1586897274-307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that got
merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the final
patch here reverts part of that, re-exporting the symbol to resolve that
issue. All of these patches, with the exception of the final one, have
been in linux-next with only that one reported issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVliw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymf6ACfS5HoPt+kWKtfKteN/mt6WUeJz6oAoMDg4Qvf
4ncqmH9jt0lj5NAwHxFi
=DP2q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that
got merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the
final patch here reverts part of that, re-exporting the symbol to
resolve that issue. All of these patches, with the exception of the
final one, have been in linux-next with only that one reported issue"
* tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: revert removal of the fw_fallback_config export
debugfs: remove return value of debugfs_create_u32()
firmware_loader: remove unused exports
firmware: imx: fix compile-testing
Commit:
cf6b836648 ("efi/libstub: Make initrd file loader configurable")
inadvertently disabled support on x86 for loading an initrd passed via
the initrd= option on the kernel command line.
Add X86 to the newly introduced Kconfig option's title and depends
declarations, so it gets enabled by default, as before.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Instead of making match_config_table() test its table_types pointer for
NULL-ness, omit the call entirely if no arch_tables pointer was provided
to efi_config_parse_tables().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Increase legibility by adding whitespace to the efi_config_table_type_t
arrays that describe which EFI config tables we look for when going over
the firmware provided list. While at it, replace the 'name' char pointer
with a char array, which is more space efficient on relocatable 64-bit
kernels, as it avoids a 8 byte pointer and the associated relocation
data (24 bytes when using RELA format)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We no longer need to take special care when using global variables
in the EFI stub, so switch to a simple symbol reference for efi_is64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
So switch over the remaining boolean variables carrying options set
on the kernel command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
Start with efi_system_table(), and convert it into a global variable.
While at it, make it a pointer-to-const, because we can.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that both arm and x86 are using the linker script to place the EFI
stub's global variables in the correct section, remove __efistub_global.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Add relocation checking for x86 as well to catch non-PC-relative
relocations that require runtime processing, since the EFI stub does not
do any runtime relocation processing.
This will catch, for example, data relocations created by static
initializers of pointers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200416151227.3360778-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move efi_relocate_kernel() into a separate source file, so that it
only gets pulled into builds for architectures that use it. Since
efi_relocate_kernel() is the only user of efi_low_alloc(), let's
move that over as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
It is no longer necessary to locate the kernel as low as possible in
physical memory, and so we can switch from efi_low_alloc() [which is
a rather nasty concoction on top of GetMemoryMap()] to a new helper
called efi_allocate_pages_aligned(), which simply rounds up the size
to account for the alignment, and frees the misaligned pages again.
So considering that the kernel can live anywhere in the physical
address space, as long as its alignment requirements are met, let's
switch to efi_allocate_pages_aligned() to allocate the pages.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Break out the code to create an aligned page allocation from mem.c
and move it into a function efi_allocate_pages_aligned() in alignedmem.c.
Update efi_allocate_pages() to invoke it unless the minimum alignment
equals the EFI page size (4 KB), in which case the ordinary page
allocator is sufficient. This way, efi_allocate_pages_aligned() will
only be pulled into the build if it is actually being used (which will
be on arm64 only in the immediate future)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The KASLR code path in the arm64 version of the EFI stub incorporates
some overly complicated logic to randomly allocate a region of the right
alignment: there is no need to randomize the placement of the kernel
modulo 2 MiB separately from the placement of the 2 MiB aligned allocation
itself - we can simply follow the same logic used by the non-randomized
placement, which is to allocate at the correct alignment, and only take
TEXT_OFFSET into account if it is not a round multiple of the alignment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The notion of a 'preferred' load offset for the kernel dates back to the
times when the kernel's primary mapping overlapped with the linear region,
and memory below it could not be used at all.
Today, the arm64 kernel does not really care where it is loaded in physical
memory, as long as the alignment requirements are met, and so there is no
point in unconditionally moving the kernel to a new location in memory at
boot. Instead, we can
- check for a KASLR seed, and randomly reallocate the kernel if one is
provided
- otherwise, check whether the alignment requirements are met for the
current placement of the kernel, and just run it in place if they are
- finally, do an ordinary page allocation and reallocate the kernel to a
suitably aligned buffer anywhere in memory.
By the same reasoning, there is no need to take TEXT_OFFSET into account
if it is a round multiple of the minimum alignment, which is the usual
case for relocatable kernels with TEXT_OFFSET randomization disabled.
Otherwise, it suffices to use the relative misaligment of TEXT_OFFSET
when reallocating the kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The implementation of efi_random_alloc() arbitrarily truncates the
provided random seed to 16 bits, which limits the granularity of the
randomly chosen allocation offset in memory. This is currently only
an issue if the size of physical memory exceeds 128 GB, but going
forward, we will reduce the allocation alignment to 64 KB, and this
means we need to increase the granularity to ensure that the random
memory allocations are distributed evenly.
We will need to switch to 64-bit arithmetic for the multiplication,
but this does not result in 64-bit integer intrinsic calls on ARM or
on i386.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub uses a per-architecture #define for the minimum base
and size alignment of page allocations, which is set to 4 KB for
all architecures except arm64, which uses 64 KB, to ensure that
allocations can always be (un)mapped efficiently, regardless of
the page size used by the kernel proper, which could be a kexec'ee
The API wrappers around page based allocations assume that this
alignment is always taken into account, and so efi_free() will
also round up its size argument to EFI_ALLOC_ALIGN.
Currently, efi_random_alloc() does not honour this alignment for
the allocated size, and so freeing such an allocation may result
in unrelated memory to be freed, potentially leading to issues
after boot. So let's round up size in efi_random_alloc() as well.
Fixes: 2ddbfc81ea ("efi: stub: add implementation of efi_random_alloc()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the ability to automatically pick the highest resolution video mode
(defined as the product of vertical and horizontal resolution) by using
a command-line argument of the form
video=efifb:auto
If there are multiple modes with the highest resolution, pick one with
the highest color depth.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200328160601.378299-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Extend the video mode argument to handle an optional color depth
specification of the form
video=efifb:<xres>x<yres>[-(rgb|bgr|<bpp>)]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-14-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the ability to choose a video mode for the selected gop by using a
command-line argument of the form
video=efifb:mode=<n>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-12-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
pixel_format must be one of
PIXEL_RGB_RESERVED_8BIT_PER_COLOR
PIXEL_BGR_RESERVED_8BIT_PER_COLOR
PIXEL_BIT_MASK
since we skip PIXEL_BLT_ONLY when finding a gop.
Remove the redundant code and add another check in find_gop to skip any
pixel formats that we don't know about, in case a later version of the
UEFI spec adds one.
Reformat the code a little.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the __ffs/__fls macros to calculate the position and size of the
mask.
Correct type of mask to u32 instead of unsigned long.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-9-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move extraction of the mode information parameters outside the loop to
find the gop, and eliminate some redundant variables.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Fix the following sparse warning:
drivers/firmware/efi/libstub/arm-stub.c:68:6: warning:
symbol 'install_memreserve_table' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1587643713-28169-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We have wrappers around EFI calls so that x86 can define special
versions for mixed mode, while all other architectures can use the
same simple definition that just issues the call directly.
In preparation for the arrival of yet another architecture that doesn't
need anything special here (RISC-V), let's move the default definition
into a shared header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Loading an initrd passed via the kernel command line is deprecated: it
is limited to files that reside in the same volume as the one the kernel
itself was loaded from, and we have more flexible ways to achieve the
same. So make it configurable so new architectures can decide not to
enable it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found
after restarting my randconfig build testing that had been dormant for
a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=K1jH
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
found after restarting my randconfig build testing that had been
dormant for a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: imx8: select SOC_BUS
soc: tegra: fix tegra_pmc_get_suspend_mode definition
soc: fsl: dpio: avoid stack usage warning
soc: fsl: dpio: fix incorrect pointer conversions
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
ARM: dts: bcm283x: Disable dsi0 node
firmware: xilinx: make firmware_debugfs_root static
drivers: soc: xilinx: fix firmware driver Kconfig dependency
ARM: dts: bcm283x: Add cells encoding format to firmware bus
ARM: dts: OMAP3: disable RNG on N950/N9
The header of the message to send can be changed if the
response is longer than the request:
- 1st word, the header is sent
- the remaining words of the message are sent
- the response is received asynchronously during the
execution of the loop, changing the size field in
the header
- the for loop test the termination condition using
the corrupted header
It is the case for the API build_info which has just a
header as request but 3 words in response.
This issue is fixed storing the header locally instead of
using a pointer on it.
Fixes: edbee095fa (firmware: imx: add SCU firmware driver support)
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Most of the arm-stub code is written in an architecture independent manner.
As a result, RISC-V can reuse most of the arm-stub code.
Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200415195422.19866-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Tegra BPMP driver typically ends up deferring probe because it wants
to attach to the SMMU, so there's little sense in registering it at the
core init-level.
One side-effect of this is that the driver will be probed later even if
it doesn't want to attach to an SMMU, which means that consumers will
end up deferring probe, which in turn takes care of ordering the suspend
and resume queue in the correct way. Currently since suspend/resume
order depends on instantiation order, and because BPMP is listed at the
very end of the device tree (after most of its consumers), the suspend
and resume queue is ordered wrongly, which can cause issues for drivers
(like I2C) which suspend after and resume before BPMP. In the case of
I2C this typically leads to the clock failing to enable.
Besides fixing this suspend/resume ordering issue, this also has the
added benefit of allowing the driver to be built as a loadable module,
which can help decrease the size of multiplatform kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
As far as the device is concerned the dma address is the physical
address. There is no need to convert it to a physical address,
especially not using dma-direct internals that are not available
to drivers and which will interact badly with IOMMUs. Last but not
least the commit introducing it claimed to just fix a type issue,
but actually changed behavior.
Fixes: 6e37ccf78a ("firmware: qcom_scm: Use proper types for dma mappings")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200414123136.441454-1-hch@lst.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/firmware/qcom_scm.c:946:25-30: WARNING: conversion to bool not
needed here
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420123516.7888-1-yanaijie@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Upon reception of an unexpected bogus delayed response, clear the channel
and bail-out safely.
Link: https://lore.kernel.org/r/20200420152315.21008-5-cristian.marussi@arm.com
Fixes: 4d09852b6f ("firmware: arm_scmi: Add support for notifications message processing")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Clear channel properly when done processing a delayed response.
This will let the platform firmware know that the channel is now free to
use it for any new delayed response or notification.
Link: https://lore.kernel.org/r/20200420152315.21008-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
(sudeep.holla: Updated commit log to reflect that channel is now free for
platform to use)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When an unexpected response message is received we currently warn the user
and bail-out, ensure to also free the channel by invoking the transport
independent operation .clear_channel()
Link: https://lore.kernel.org/r/20200420152315.21008-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI transport operation .clear_notification() is indeed a generic method
to clear the channel in a transport dependent way, as such it could be a
useful helper also in other contexts.
Rename such method as .clear_channel(), renaming accordingly also its
already existent call-sites.
No functional change.
Link: https://lore.kernel.org/r/20200420152315.21008-2-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Current imx-scu requires four TX and four RX to communicate with
SCU. This is low efficient and causes lots of mailbox interrupts.
With imx-mailbox driver could support one TX to use all four transmit
registers and one RX to use all four receive registers, imx-scu
could use one TX and one RX.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is nice to allow compile-testing the firmware drivers, but this
fails when the dependency is a loadable module:
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_power':
scu-pd.c:(.text+0xd8): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: scu-pd.c:(.text+0x108): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_probe':
Change the dependencies to ensure that any driver we depend on is
either reachable or we are compile-testing and it is disabled,
effectively reverting most of the previous changes that turned
out to be incorrect.
Fixes: a9f85f93ed ("firmware: imx: add COMPILE_TEST support")
Fixes: 5b00b83754 ("firmware: imx: add COMPILE_TEST for IMX_SCU driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408190314.695067-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/firmware/xilinx/zynqmp-debug.c:38:15: warning: symbol
'firmware_debugfs_root' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200415084311.24857-1-yanaijie@huawei.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add the mechanisms to distinguish notifications from delayed responses
and command responses. Also add support to properly fetch notification
messages upon reception. Notifications processing does not continue any
further after the fetch phase.
Link: https://lore.kernel.org/r/20200327143438.5382-5-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Reworked/renamed scmi_handle_xfer_delayed_resp()]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add common transport-layer methods to:
- fetch a notification instead of a response
- clear a pending notification
Add also all the needed support in mailbox/shmem transports.
Link: https://lore.kernel.org/r/20200327143438.5382-4-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add commands' enumerations and messages definitions for all existing
notify-enable commands across all protocols.
Link: https://lore.kernel.org/r/20200327143438.5382-3-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With all the plumbing in place, let's just add the separate dedicated
receive buffers to handle notifications that can arrive asynchronously
from the platform firmware to OS.
Also add one check to see if the platform supports any receive channels
before allocating the receive buffers: since those buffers are optionally
supported though, the whole xfer initialization is also postponed to be
able to check for their existence in advance.
Link: https://lore.kernel.org/r/20200327143438.5382-2-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Changed parameters in __scmi_xfer_info_init()]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The scmi protocol core driver checks for the channel availability
before evaluating the shmem property. If the individual protocols
don't have separate channel assigned to them, the channel alloted
for the BASE protocol is reused automatically.
Therefore there is no need to check for the shmem property in the
parent node if it is absent in the child protocol node.
Link: https://lore.kernel.org/r/20200327163654.13389-5-sudeep.holla@arm.com
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Instead of declaring the channel availabilty unconditionally, let us
check for the presence of "shmem" property and return the channel
availablity accordingly.
Link: https://lore.kernel.org/r/20200327163654.13389-4-sudeep.holla@arm.com
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The scmi protocol core driver check for non NULL mark_txdone before
invoking the same. There is no need to provide a empty stub. SMC/HVC
calls are synchronous and the call return indicates the completion.
Link: https://lore.kernel.org/r/20200327163654.13389-3-sudeep.holla@arm.com
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In order to support multiple SMC/HVC transport channels with associated
shared memory, it is better to maintain the mutex per channel instead of
existing global one.
Move the smc_mutex into the scmi_smc structure and also rename it to
shmem_lock which is more appropriate for it's use.
Link: https://lore.kernel.org/r/20200327163654.13389-2-sudeep.holla@arm.com
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use the value of "arm,smc-id" property from the device tree as the first
argument for SMCCC call leaving all the other arguments as zero for now.
There is no Rx, only Tx because of smc/hvc not support Rx.
Link: https://lore.kernel.org/r/1583673879-20714-3-git-send-email-peng.fan@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[sudeep.holla: reworded commit log/subject and fixed !HAVE_ARM_SMCCC build]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arnd reports that commit
9302c1bb8e ("efi/libstub: Rewrite file I/O routine")
reworks the file I/O routines in a way that triggers the following
warning:
drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]
We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
Commit
d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")
tries to avoid relocating the kernel in the EFI stub as far as possible.
However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.
To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
Commit
3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
removed the .bss section from the bzImage.
However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.
When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.
In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.
To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: 3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A collection of small fixes gathered since the previous update.
* ALSA core:
- Regression fix for OSS PCM emulation
* ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
* Others
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped
from anyone's hands.
-----BEGIN PGP SIGNATURE-----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=mFJY
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and rarely
enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half of
a 32-bit Thumb-2 instruction).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6PUYAACgkQa9axLQDI
XvH83g/7B5v0RFqjqVW4/cQKoN1rii7qSA8pBfNgGiCMJKtoGvliAlp3xWEtlW0h
nYJ4gCvey946r5kvZrjdBXC/Ulo2CcGYtX0n8d+8IB6wXAnGcQ0DUBUFZ4+fAU9Z
F7+R7its24dma9R1wIFHFmQUdlO+EgQTfQFvhQKYMSNVaFQF73Sp/vk3oKhJ2E0x
QevgDBQSmmcX3DFxhUW7BdcdboBgtTDUGdhcImdorgp7QmI1r40espJKX4VMKvmb
pfzwg+i7KM6N1RDhRfA2oFMegXwI3rvM3XesqYaua8+xWD5vJuIQfq+ysEq9F9x/
Hnu+W9nbcN8RKQ9JToiqkE7ifuOBTvaIJaqsgIXYSqtYjatuPAh85MkrorHi9Ji2
9i7fc0GMTgtgYDo/93++l8SmmRJMX+h+9KtGtxx39+UqGjToJMCnPGjwBSwe4wdK
lKOAgj488HHsNwTlrRUnq1hXjNjd1w+ON7JM2L3IyRNX/eWN60VxwzwHkZMByCOj
jlcY4ISWquigW4w9Sp4nxEhLF9dWT1+OrE33Xh3CUxPU94jSEvgcDHcxuGeGOlrA
QjN1B2APZFox8XbOsLgeG2kKe5C3Fui90SEn0GyA0ncVLsXDI78VnVJR9uz5+6Pd
ALVQKkJxswhSDPQFlH+7CmQAcr8jWyLEEvyXXaZsoJmewzCpEPM=
=pHRG
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including
cpuidle, pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=UTk1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200320084429.1803-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
When CONFIG_DEBUG_ALIGN_RODATA is enabled, kernel segments mapped with
different permissions (r-x for .text, r-- for .rodata, rw- for .data,
etc) are rounded up to 2 MiB so they can be mapped more efficiently.
In particular, it permits the segments to be mapped using level 2
block entries when using 4k pages, which is expected to result in less
TLB pressure.
However, the mappings for the bulk of the kernel will use level 2
entries anyway, and the misaligned fringes are organized such that they
can take advantage of the contiguous bit, and use far fewer level 3
entries than would be needed otherwise.
This makes the value of this feature dubious at best, and since it is not
enabled in defconfig or in the distro configs, it does not appear to be
in wide use either. So let's just remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Laura Abbott <labbott@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci: Add support for sdmmc variant revision 2.0
- mmci_sdmmc: Improve support for busyend detection
- mmci_sdmmc: Fixup support for signal voltage switch
- mmci_sdmmc: Add support for tuning with delay block
- mtk-sd: Fix another SDIO irq issue
- sdhci: Disable native card detect when GPIO based type exist
- sdhci: Add option to defer request completion
- sdhci_am654: Add support to set a tap value per speed mode
- sdhci-esdhc-imx: Add support for i.MX8MM based variant
- sdhci-esdhc-imx: Fixup support for standard tuning on i.MX8 usdhc
- sdhci-esdhc-imx: Optimize for strobe/clock dll settings
- sdhci-esdhc-imx: Fixup support for system and runtime suspend/resume
- sdhci-iproc: Update regulator/bus-voltage management for bcm2711
- sdhci-msm: Prevent clock gating with PWRSAVE_DLL on broken variants
- sdhci-msm: Fix management of CQE during SDHCI reset
- sdhci-of-arasan: Add support for auto tuning on ZynqMP based platforms
- sdhci-omap: Add support for system suspend/resume
- sdhci-sprd: Add support for HW busy detection
- sdhci-sprd: Enable support host software queue
- sdhci-tegra: Add support for HW busy detection
- tmio/renesas_sdhi: Enforce retune after runtime suspend
- renesas_sdhi: Use manual tap correction for HS400 on some variants
- renesas_sdhi: Add support for manual correction of tap values for tunings
-----BEGIN PGP SIGNATURE-----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=gILc
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci:
* Add support for sdmmc variant revision 2.0
- mmci_sdmmc:
* Improve support for busyend detection
* Fixup support for signal voltage switch
* Add support for tuning with delay block
- mtk-sd:
* Fix another SDIO irq issue
- sdhci:
* Disable native card detect when GPIO based type exist
- sdhci:
* Add option to defer request completion
- sdhci_am654:
* Add support to set a tap value per speed mode
- sdhci-esdhc-imx:
* Add support for i.MX8MM based variant
* Fixup support for standard tuning on i.MX8 usdhc
* Optimize for strobe/clock dll settings
* Fixup support for system and runtime suspend/resume
- sdhci-iproc:
* Update regulator/bus-voltage management for bcm2711
- sdhci-msm:
* Prevent clock gating with PWRSAVE_DLL on broken variants
* Fix management of CQE during SDHCI reset
- sdhci-of-arasan:
* Add support for auto tuning on ZynqMP based platforms
- sdhci-omap:
* Add support for system suspend/resume
- sdhci-sprd:
* Add support for HW busy detection
* Enable support host software queue
- sdhci-tegra:
* Add support for HW busy detection
- tmio/renesas_sdhi:
* Enforce retune after runtime suspend
- renesas_sdhi:
* Use manual tap correction for HS400 on some variants
* Add support for manual correction of tap values for tunings"
* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: cavium-octeon: remove nonsense variable coercion
mmc: mediatek: fix SDIO irq issue
mmc: mmci_sdmmc: Fix clear busyd0end irq flag
dt-bindings: mmc: Fix node name in an example
mmc: core: Re-work the code for eMMC sanitize
mmc: sdhci: use FIELD_GET for preset value bit masks
mmc: sdhci-of-at91: Display clock changes for debug purpose only
mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
sdhci: tegra: Implement Tegra specific set_timeout callback
mmc: sdhci-omap: Add Support for Suspend/Resume
mmc: renesas_sdhi: simplify execute_tuning
mmc: renesas_sdhi: Use BITS_PER_LONG helper
...
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
- In-kernel Pointer Authentication support (previously only offered to
user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6DVyIACgkQa9axLQDI
XvHkqRAAiZA2EYKiQL4M1DJ1cNTADjT7xKX9+UtYBXj7GMVhgVWdunpHVE6qtfgk
cT6avmKrS/6PDqizJgr+Z1yX8x3Kvs57G4BvmIUKIw97mkdewvFQ9JKv6VA1vb86
7Qrl1WzqsGg5Kj9uUfI4h+ZoT1H4C/9PQeFxJwgZRtF9DxRh8O7VeZI+JCu8Aub2
lIkjI8rh+EpTsGT9h/PMGWUcawnKQloZ1/F+GfMAuYBvIv2RNN2xVreJtTmm4NyJ
VcpL0KCNyAI2lGdaJg5nBLRDyGuXDm5i+PLsCSXMquI4fie00txXeD8sjbeuO0ks
YTJ0EhmUUhbSE17go+SxYiEFE0v09i+lD5ud+B4Vmojp0KTczTta9VSgURlbb2/9
n9biq5G3PPDNIrZqiTT2Tf4AMz1350nkbzL2gzKecM5aIzR/u3y5yII5CgfZtFnj
7bGbyFpFpcqI7UaISPsNCxmknbTt/7ff0WM3+7SbecxI3AD2mnxsOdN9JTLyhDp+
owjyiaWxl5zMWF9DhplLG/9BKpNWSxh3skazdOdELd8GTq2MbJlXrVG2XgXTAOh3
y1s6RQrfw8zXh8TSqdmmzauComXIRWTum/sbVB3U8Z3AUsIeq/NTSbN5X9JyIbOP
HOabhlVhhkI6omN1grqPX4jwUiZLZoNfn7Ez4q71549KVK/uBtA=
=LJVX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low level
functions cpu_up/down() are now confined to the core code and not
longer accessible from random code.
-----BEGIN PGP SIGNATURE-----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=jwCg
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and use
of new apis, a libfs fix, a debugfs api change, and some driver core
deferred probe rework.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHLIg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yle2ACgjJJzRJl9Ckae3ms+9CS4OSFFZPsAoKSrXmFc
Z7goYQdZo1zz8c0RYDrJ
=Y91m
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and
use of new apis, a libfs fix, a debugfs api change, and some driver
core deferred probe rework.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
driver core: Set fw_devlink to "permissive" behavior by default
driver core: Replace open-coded list_last_entry()
driver core: Read atomic counter once in driver_probe_done()
libfs: fix infoleak in simple_attr_read()
driver core: Add device links from fwnode only for the primary device
platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
Input: silead - Switch to firmware_request_platform for retreiving the fw
selftests: firmware: Add firmware_request_platform tests
test_firmware: add support for firmware_request_platform
firmware: Add new platform fallback mechanism and firmware_request_platform()
Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
drivers: base: power: wakeup.c: Use built-in RCU list checking
component: allow missing unbind callback
debugfs: remove return value of debugfs_create_file_size()
debugfs: Check module state before warning in {full/open}_proxy_open()
firmware: fix a double abort case with fw_load_sysfs_fallback
arch_topology: Fix putting invalid cpu clk
...
Commit:
ec93fc371f ("efi/libstub: Add support for loading the initrd from a device path")
added a diagnostic print to the ARM version of the EFI stub that
reports whether an initrd has been loaded that was passed
via the command line using initrd=.
However, it failed to take into account that, for historical reasons,
the file loading routines return EFI_SUCCESS when no file was found,
and the only way to decide whether a file was loaded is to inspect
the 'size' argument that is passed by reference. So let's inspect
this returned size, to prevent the print from being emitted even if
no initrd was loaded at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Commit:
9f9223778e ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF entrypoint")
did some code refactoring to get rid of the EFI entry point assembler
code, and in the process, it got rid of the assignment of image_addr
to the value of _text. Instead, it switched to using the image_base
field of the efi_loaded_image struct provided by UEFI, which should
contain the same value.
However, Michael reports that this is not the case: older GRUB builds
corrupt this value in some way, and since we can easily switch back to
referring to _text to discover this value, let's simply do that.
While at it, fix another issue in commit 9f9223778e, which may result
in the unassigned image_addr to be misidentified as the preferred load
offset of the kernel, which is unlikely but will cause a boot crash if
it does occur.
Finally, let's add a warning if the _text vs. image_base discrepancy is
detected, so we can tell more easily how widespread this issue actually
is.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
ARM SCMI/SCPI updates for v5.7
1. Abstraction of the scmi transport type from the core protocol driver
which enables addition of other transports like SMC/HVC, SPCI and
virtio apart from the existing mailbox
2. Miscellaneous fix for minor formatting issues with the kernel-doc
style comments
3. Replacement of zero-length array with flexible-array member which is
part of tree-wide cleanup
* tag 'scmi-updates-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
misc: vexpress: Replace zero-length array with flexible-array member
firmware: arm_scpi: Replace zero-length array with flexible-array member
firmware: arm_scmi/perf: Replace zero-length array with flexible-array member
firmware: arm_scmi: Replace zero-length array with flexible-array member
firmware: arm_scmi: Make scmi core independent of the transport type
firmware: arm_scmi: Move macros and helpers to common.h
firmware: arm_scmi: Update doc style comments
Link: https://lore.kernel.org/r/20200304175247.GA5402@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A trivial typofix for the Kconfig entry of the Tegra IVC library.
-----BEGIN PGP SIGNATURE-----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=irBu
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.7-rc1
A trivial typofix for the Kconfig entry of the Tegra IVC library.
* tag 'tegra-for-5.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix a typo in Kconfig
Link: https://lore.kernel.org/r/20200313165848.2915133-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update SCU power domain driver to include PD ranges for audio, CM40
I2C and INTMUX, also enlarge PD range for mu_b.
- Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
- Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
- Improve i.MX GPC power up sequencing to ensure that the reset is
properly propagated through the peripheral devices in the power
domain.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xhKcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4/6gf/e9lFuDNG9HiVsDad6YODwzZZxNF6
AxBqD924W4chqLZboAgahFVrWEyINourkzx9PMYK5gE6D6lxEnHhevbfVOYaw3NT
Wjv4TSOCMzzlfzJIeFf+m0vzTR3gOtmE6Cto/HMd95IlF+afCzIWrKW+gAGWoRVH
c1sCstForQ8SMoFixCJ+YfV8DXje1wGqgLEquMtn5jih2ZEIijo2XZ4nPs6ip4mV
Pf+a3WXuN2NB13U2CKbkonk+JY2d8OFqLNQer7WsNp29wCSJqZB2ewnZP/vGSqvO
e/i4BxMTtKg/2DPZFmCZNVbM3aEf0tv2E2c28bcb5qDuJfFu2jE4+olwCg==
=LVyO
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.7:
- Update SCU power domain driver to include PD ranges for audio, CM40
I2C and INTMUX, also enlarge PD range for mu_b.
- Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
- Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
- Improve i.MX GPC power up sequencing to ensure that the reset is
properly propagated through the peripheral devices in the power
domain.
* tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
firmware: imx: Remove IMX_SC_RPC_SVC_ABORT
firmware: imx: scu-pd: enlarge PD range for mu_b
firmware: imx: scu-pd: Add missing audio PD ranges
soc: imx: gpcv2: include linux/sizes.h
Link: https://lore.kernel.org/r/20200318051918.32579-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The core device API performs extra housekeeping bits that are missing
from directly calling cpu_up/down().
See commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM") for an example description of what might go
wrong.
This also prepares to make cpu_up/down a private interface of the CPU subsystem.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lkml.kernel.org/r/20200323135110.30522-15-qais.yousef@arm.com
SD DLL resets are required for some of the operations on ZynqMP platform.
Add DLL reset support in ZynqMP firmware driver for SD DLL reset.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1579602095-30060-3-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Tap Delay setup ioctl was not added to valid list due to which it
may fail to set Tap Delays for SD. This patch fixes the same.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1579602095-30060-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use SMBIOS_ENTRY_POINT_SCAN_START instead of 0xF0000, because other
archtecture maybe use a special start address such as 0xFFFE000 for
Loongson platform.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Sofar we have been unable to get permission from the vendors to put the
firmware for touchscreens listed in touchscreen_dmi in linux-firmware.
Some of the tablets with such a touchscreen have a touchscreen driver, and
thus a copy of the firmware, as part of their EFI code.
This commit adds the necessary info for the new EFI embedded-firmware code
to extract these firmwares, making the touchscreen work OOTB without the
user needing to manually add the firmware.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-10-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable shared branch to ease the integration of Hans's series to support
device firmware loaded from EFI boot service memory regions.
[PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5eJNoACgkQwjcgfpV0
+n16Fwf/fXCS+xefhIeXZuUQsQexDsofHYrWlt9oS74KF6iqxVDdfSRZHZvAT/Hr
r1pYpMFSKhRy/u8hhTz1RxwoJXiwQg+yPKwLAMvt+xx2BaNJzLFPvWX8euHYDubM
mWfrjStgandAcNzBDBIYYdG/fSYjlzq/xWF+rlYnnhMNa6lcYhecwgxmt0iYtMnB
S31473zE7DZE0PyV9vEEMyaEbQJYprKrIGoaVpbQ80Y2f2MDNaft+7/EGXx5Hxex
pHZrBdkCL1v7ej7pg8bcxqid682fle5tnogzxf5jo0xMMSXnT5xVPg4OL3rY7kwD
Ba4cLaJD4Q1fFZ1GwPfa59PrDnUIfA==
=sj1e
-----END PGP SIGNATURE-----
Merge tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into driver-core-next
Ard writes:
Stable shared branch between EFI and driver tree
Stable shared branch to ease the integration of Hans's series to support
device firmware loaded from EFI boot service memory regions.
[PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/
* tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Add embedded peripheral firmware support
efi: Export boot-services code and data as debugfs-blobs
Add the compatible property value so we can reuse Intel Stratix10
Service Layer driver on Intel Agilex SoC platform.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1583428346-13307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add COMPILE_TEST support to IMX_SCU driver for better compile
testing coverage. Any driver depending on IMX_SCU shouldn't have
COMPILE_TEST though.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Prevent a race and buffer overflow in the sysfs efivars interface which
causes kernel memory corruption.
- Add the missing NULL pointer checks in efivar_store_raw()
-----BEGIN PGP SIGNATURE-----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=BzA6
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"Two EFI fixes:
- Prevent a race and buffer overflow in the sysfs efivars interface
which causes kernel memory corruption.
- Add the missing NULL pointer checks in efivar_store_raw()"
* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Add a sanity check to efivar_store_raw()
efi: Fix a race and a buffer overflow while reading efivars via sysfs
Make zynqmp_firmware driver as optional to disable it, if user don't
want to use default zynqmp firmware interface.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was
a miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing for
a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms.
-----BEGIN PGP SIGNATURE-----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=gCNz
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was a
miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing
for a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
ARM: socfpga_defconfig: Add back DEBUG_FS
arm64: dts: socfpga: agilex: Fix gmac compatible
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson-sm1-sei610: add missing interrupt-names
ARM: meson: Drop unneeded select of COMMON_CLK
ARM: dts: bcm2711: Add pcie0 alias
ARM: dts: bcm283x: Add missing properties to the PWR LED
tee: amdtee: fix memory leak in amdtee_open_session()
ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
arm: dts: dra76x: Fix mmc3 max-frequency
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
bus: ti-sysc: Fix 1-wire reset quirk
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu: Ensure sequential TX
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
...
The header flag XLF_CAN_BE_LOADED_ABOVE_4G will inform us whether
allocations above 4 GiB for kernel, command line, etc are permitted,
so we take it into account when calling efi_allocate_pages() etc.
However, CONFIG_EFI_STUB implies CONFIG_RELOCATABLE, and so the flag
is guaranteed to be set on x86_64 builds, whereas i386 builds are
guaranteed to run under firmware that will not allocate above 4 GB
in the first place.
So drop the check, and just pass ULONG_MAX as the upper bound for
all allocations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303225054.28741-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-27-ardb@kernel.org
drivers/firmware/efi/libstub/Makefile builds a static library, which
is not linked into the main vmlinux target in the ordinary way [arm64],
or at all [ARM, x86].
Since commit:
7f2084fa55 ("[kbuild] handle exports in lib-y objects reliably")
any Makefile using lib-y generates lib-ksyms.o which is linked into vmlinux.
In this case, the following garbage object is linked into vmlinux.
drivers/firmware/efi/libstub/lib-ksyms.o
We do not want to follow the default linking rules for static libraries
built under libstub/ so using subdir-y instead of obj-y is the correct
way to descend into this directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: update commit log to clarify that arm64 deviates in this respect]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200305055047.6097-1-masahiroy@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-23-ardb@kernel.org
Commit:
3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")
moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.
We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:
------------[ cut here ]------------
ioremap on RAM at 0x3f251000 - 0x3fa1afff
WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
EIP: __ioremap_caller.constprop.0+0x249/0x260
Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
Call Trace:
ioremap_cache+0xd/0x10
? old_map_region+0x72/0x9d
old_map_region+0x72/0x9d
efi_map_region+0x8/0xa
efi_enter_virtual_mode+0x260/0x43b
start_kernel+0x329/0x3aa
i386_start_kernel+0xa7/0xab
startup_32_smp+0x164/0x168
---[ end trace e15ccf6b9f356833 ]---
Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.
Fixes: 3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
Add alignment slack to the PE image size, so that we can realign the
decompression buffer within the space allocated for the image.
Only relocate the kernel if it has been loaded at an unsuitable address:
- Below LOAD_PHYSICAL_ADDR, or
- Above 64T for 64-bit and 512MiB for 32-bit
For 32-bit, the upper limit is conservative, but the exact limit can be
difficult to calculate.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-20-ardb@kernel.org
Even though it is uncommon, there are cases where the Exit() EFI boot
service might return, e.g., when we were booted via the EFI handover
protocol from OVMF and the kernel image was specified on the command
line, in which case Exit() attempts to terminate the boot manager,
which is not an EFI application itself.
So let's drop into an infinite loop instead of randomly executing code
that isn't expecting it.
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: put 'hlt' in deadloop]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303080648.21427-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-15-ardb@kernel.org
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
There is a race and a buffer overflow corrupting a kernel memory while
reading an EFI variable with a size more than 1024 bytes via the older
sysfs method. This happens because accessing struct efi_variable in
efivar_{attr,size,data}_read() and friends is not protected from
a concurrent access leading to a kernel memory corruption and, at best,
to a crash. The race scenario is the following:
CPU0: CPU1:
efivar_attr_read()
var->DataSize = 1024;
efivar_entry_get(... &var->DataSize)
down_interruptible(&efivars_lock)
efivar_attr_read() // same EFI var
var->DataSize = 1024;
efivar_entry_get(... &var->DataSize)
down_interruptible(&efivars_lock)
virt_efi_get_variable()
// returns EFI_BUFFER_TOO_SMALL but
// var->DataSize is set to a real
// var size more than 1024 bytes
up(&efivars_lock)
virt_efi_get_variable()
// called with var->DataSize set
// to a real var size, returns
// successfully and overwrites
// a 1024-bytes kernel buffer
up(&efivars_lock)
This can be reproduced by concurrent reading of an EFI variable which size
is more than 1024 bytes:
ts# for cpu in $(seq 0 $(nproc --ignore=1)); do ( taskset -c $cpu \
cat /sys/firmware/efi/vars/KEKDefault*/size & ) ; done
Fix this by using a local variable for a var's data buffer size so it
does not get overwritten.
Fixes: e14ab23dde ("efivars: efivar_entry API")
Reported-by: Bob Sanders <bob.sanders@hpe.com> and the LTP testsuite
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200305084041.24053-2-vdronov@redhat.com
Link: https://lore.kernel.org/r/20200308080859.21568-24-ardb@kernel.org
More EFI updates for v5.7
- Incorporate a stable branch with the EFI pieces of Hans's work on
loading device firmware from EFI boot service memory regions
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The fw_devlink_get_flags() provides the right flags to use when creating
mandatory device links derived from information provided by the
firmware. So, use that.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200222014038.180923-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just like with PCI options ROMs, which we save in the setup_efi_pci*
functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself
sometimes may contain data which is useful/necessary for peripheral drivers
to have access to.
Specifically the EFI code may contain an embedded copy of firmware which
needs to be (re)loaded into the peripheral. Normally such firmware would be
part of linux-firmware, but in some cases this is not feasible, for 2
reasons:
1) The firmware is customized for a specific use-case of the chipset / use
with a specific hardware model, so we cannot have a single firmware file
for the chipset. E.g. touchscreen controller firmwares are compiled
specifically for the hardware model they are used with, as they are
calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to
redistribute the firmware. This is especially a problem with customized
firmwares, these get created by the chip vendor for a specific ODM and the
copyright may partially belong with the ODM, so the chip vendor cannot
give a blanket permission to distribute these.
This commit adds support for finding peripheral firmware embedded in the
EFI code and makes the found firmware available through the new
efi_get_embedded_fw() function.
Support for loading these firmwares through the standard firmware loading
mechanism is added in a follow-up commit in this patch-series.
Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end
of start_kernel(), just before calling rest_init(), this is on purpose
because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for
early_memremap(), so the check must be done after mm_init(). This relies
on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services()
is called, which means that this will only work on x86 for now.
Reported-by: Dave Olsthoorn <dave@bewaar.me>
Suggested-by: Peter Jones <pjones@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-3-hdegoede@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Sometimes it is useful to be able to dump the efi boot-services code and
data. This commit adds these as debugfs-blobs to /sys/kernel/debug/efi,
but only if efi=debug is passed on the kernel-commandline as this requires
not freeing those memory-regions, which costs 20+ MB of RAM.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-2-hdegoede@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Recent changes to the way we deal with EFI runtime services that
are marked as unsupported by the firmware resulted in a regression
for non-EFI boot. The problem is that all EFI runtime services are
marked as available by default, and any non-NULL checks on the EFI
service function pointers (which will be non-NULL even for runtime
services that are unsupported on an EFI boot) were replaced with
checks against the mask stored in efi.runtime_supported_mask.
When doing a non-EFI boot, this check against the mask will return
a false positive, given the fact that all runtime services are
marked as enabled by default. Since we dropped the non-NULL check
of the runtime service function pointer in favor of the mask check,
we will now unconditionally dereference the function pointer, even
if it is NULL, and go boom.
So let's ensure that the mask reflects reality on a non-EFI boot,
which is that all EFI runtime services are unsupported.
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20200228121408.9075-7-ardb@kernel.org
Add ZynqMP firmware AES API to perform encryption/decryption of given data.
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wei Yongjun