Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
We no longer require a private armada_plane structure, so eliminate
it, and use the drm_plane structure directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Write out the plane updates after the dumb frame has completed, but
just before the blank period. This allows all the plane updates to
be performed in a flicker-free non-tearing manner.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the overlay plane away from the transitional helpers and legacy
methods, and use atomic helpers instead to implement the legacy
set_plane ioctl methods.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the primary plane away from the transitional helpers, and
use the atomic helpers instead to implement the legacy set_plane
ioctl call for this plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the legacy set_config() method to use the atomic modeset
helper, which allows us to get rid of the legacy dpms, prepare,
commit, mode_set, mode_set_base and disable helper methods.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Implement the atomic_enable()/atomic_disable() methods used by the
atomic modeset helpers. atomic_disable() will need some transitional
code during conversion to ensure proper ordering is maintained.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Explicitly pass in the desired enable/disable state into
armada_drm_crtc_update() rather than having it use the DPMS state
stored in our crtc structure.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Push responsibility for managing the clock during DPMS down into the
variant backend, rather than the CRTC layer having knowledge of its
state.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prepare handling for atomic modeset CRTC events. Currently, using the
transition helpers, CRTC events do not exist, but once we switch to
proper atomic modeset, they have to be handled.
We queue an event for the next vblank in two places:
- armada_drm_crtc_atomic_flush() provided we aren't doing an
atomic modeset.
- armada_drm_crtc_commit() if we are committing a modeset.
This ensures that the event is sent at the correct time (after all
updates have been written to the hardware and after the following
vblank.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than writing all bits of SPU_ADV_REG on modeset, only write
what we need to change, and initialise the register in the variant
initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Update debug to use KMS level, and print the mode using the standard
format for mode lines, but print the adjusted CRTC parameters as
that's what we will be programming for.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
For atomic modeset, we need to set the sync signal polarities from the
CRTC state structure rather than the legacy mode structure stored in
CRTC. In any case, we should update this from our mode_set_nofb()
method, rather than the commit() method. Move it there, and ensure
that armada_drm_crtc_update() will not overwrite these bits.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the unused CRTC colourspace properties - userspace does not make
use of these. In any case, these are not a property of the CRTC, since
they demonstrably only affect the video (overlay) plane, irrespective
of the format of the graphics (primary) plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than tracking the register state, we can now check the previous
state and decide which registers need updating from that since the old
plane state indicates the previous state which was programmed into the
hardware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer. Using the transitional helper would
make the call block, which would introduce a performance regression.
Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do. Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the primary plane as a whole to use its atomic state and the
transitional helpers. The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code. This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks. This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler. These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the missing locks to the IRQ enable/disable paths, and fix a comment
in the interrupt handler: reading the ISR clears down the status bits,
but does not reset the interrupt so it can signal again. That seems to
require a write.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Since armada isn't atomic we'll use crtc->enabled and crtc->mode instead
of the stuff under crtc_state.
Once everyone agrees on how the clip rectangle gets set up we can
move the code into drm_atomic_helper_check_plane_state().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
As armada isn't an atomic driver trying to pass a non-populated
crtc->state to drm_atomic_helper_check_plane_state() will end in tears.
Construct a temporary crtc state a la drm_plane_helper_check_update()
and pass that instead. For now we just really need crtc_state->enable
to be there.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
This series builds upon the set of fixes previously submitted to move
Armada DRM closer to atomic modeset. We're nowhere near yet, but this
series helps to get us closer by unifying some of the differences
between the primary and overlay planes.
New features added allows userspace to disable the primary plane if
overlay is full screen and there's nothing obscuring the colorkey -
this saves having to fetch an entire buffer containing nothing but
colorkey when displaying full screen video.
[airlied: fixup for atomic plane helper rename:
a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
]
* 'drm-armada-devel-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits)
drm/armada: expand overlay trace entry
drm/armada: implement primary plane update
drm/armada: extract register generation from armada_drm_primary_set()
drm/armada: wait for previous work when moving overlay window
drm/armada: move overlay plane register update generation
drm/armada: re-organise overlay register update generation
drm/armada: disable planes at next blanking period
drm/armada: avoid work allocation
drm/armada: allow armada_drm_plane_work_queue() to silently fail
drm/armada: use drm_plane_helper_check_state()
drm/armada: only enable HSMOOTH if scaling horizontally
drm/armada: move writes of LCD_SPU_SRAM_PARA1 under lock
drm/armada: move regs into armada_plane_work
drm/armada: move event sending into armada_plane_work
drm/armada: move fb retirement into armada_plane_work
drm/armada: move overlay plane work out from under spinlock
drm/armada: clear plane enable bit when disabling
drm/armada: clean up armada_drm_crtc_plane_disable()
drm/armada: allow the primary plane to be disabled
drm/armada: wait and cancel any pending frame work at disable
...
Implement primary plane update without having to go through a modeset
to achieve that; the hardware does not require such complexity. This
means we treat the primary plane as any other, allowing the format,
size, position and scaling to be updated via the normal plane ioctls.
This also allows us to seemlessly disable and re-enable the primary
plane when (eg) displaying full-frame video without any graphic
clipping the overlaid video - which saves wasting memory bandwidth
needlessly verifying that the colorkey is indeed filling the entire
primary plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Disable planes at the next blanking period rather than immediately.
In order to achieve this, we need to delay the clearing of dcrtc->plane
until after the next blanking period, so move that into a separate
work function. To avoid races, we also need to move its assignment in
the overlay code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid printing an error message when armada_drm_plane_work_queue() is
unable to get the vblank (eg, because we're doing a modeset.) Continue
to report the failure to the caller, so the caller can handle this.
Move the error message into armada_ovl_plane_update().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Only enable the HSMOOTH control bit if we are scaling horizontally,
otherwise it makes no sense to enable the horizontal scaler.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the register update structure out of the overlay private structure
into armada_plane_work, as this is common to both the primary and
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the sending of events into the armada_plane_work structure, and
combine the processing in armada_drm_plane_work_call().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Both the primary and overlay planes retire framebuffers in a similar
manner; this can be consolidated by moving the retirement up to the
armada_plane_work layer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane work out from under the spinlock so that both the
primary and overlay planes run their work in the same context. This is
necessary so that we can use frame works with the overlay plane.
However, we must update the CRTC registers under the spinlock, so fix up
the overlay code for that.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Clear the plane enable bit in the software state within
armada_drm_plane_disable() when disabling either the primary or
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable()
and rename to armada_drm_plane_disable(). Use this to simplify
armada_ovl_plane_disable().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Wait for a second, and if we time out, cancel any pending work when
disabling the primary plane. This ensures that any pending work is
completed or cleaned up prior to the disable taking effect.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a work cancel callback, so that work items can add functionality to
clean themselves up when they are cancelled.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Store the plane in the armada_plane_work structure rather than passing
it around; it doesn't get used very much in the work structures, so
passing it around is a needless expense.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Daniel Vetter