Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com
Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com
Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com
Most of libbpf "constructors" on failure return ERR_PTR(err) result encoded as
a pointer. It's a common mistake to eventually pass such malformed pointers
into xxx__destroy()/xxx__free() "destructors". So instead of fixing up
clean up code in selftests and user programs, handle such error pointers in
destructors themselves. This works beautifully for NULL pointers passed to
destructors, so might as well just work for error pointers.
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729232148.896125-1-andriin@fb.com
Sync UAPI header and add support for using bpf_link-based XDP attachment.
Make xdp/ prog type set expected attach type. Kernel didn't enforce
attach_type for XDP programs before, so there is no backwards compatiblity
issues there.
Also fix section_names selftest to recognize that xdp prog types now have
expected attach type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-8-andriin@fb.com
The kernel prevents potential unwinder warnings and crashes by blocking
BPF program with bpf_get_[stack|stackid] on perf_event without
PERF_SAMPLE_CALLCHAIN, or with exclude_callchain_[kernel|user]. Print a
hint message in libbpf to help the user debug such issues.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723180648.1429892-4-songliubraving@fb.com
Add map_fd to bpf_iter_attach_opts and flags to
bpf_link_create_opts. Later on, bpftool or selftest
will be able to create a bpf map element iterator
by passing map_fd to the kernel during link
creation time.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184117.590673-1-yhs@fb.com
Make libbpf aware of the newly added program type, and assign it a
section name.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-13-jakub@cloudflare.com
As for DEVMAP, support SEC("xdp_cpumap/") as a short cut for loading
the program with type BPF_PROG_TYPE_XDP and expected attach type
BPF_XDP_CPUMAP.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/33174c41993a6d860d9c7c1f280a2477ee39ed11.1594734381.git.lorenzo@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Coverity's static analysis helpfully reported a memory leak introduced by
0f0e55d824 ("libbpf: Improve BTF sanitization handling"). While fixing it,
I realized that btf__new() already creates a memory copy, so there is no need
to do this. So this patch also fixes misleading btf__new() signature to make
data into a `const void *` input parameter. And it avoids unnecessary memory
allocation and copy in BTF sanitization code altogether.
Fixes: 0f0e55d824 ("libbpf: Improve BTF sanitization handling")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200710011023.1655008-1-andriin@fb.com
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few
sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than
perf_buffer support itself, so this causes unnecessary problems on old kernels
before BPF_OBJ_GET_INFO_BY_FD was added.
This patch makes those sanity checks optional and just assumes best if command
is not supported. If user specified something incorrectly (e.g., wrong map
type), kernel will reject it later anyway, except user won't get a nice
explanation as to why it failed. This seems like a good trade off for
supporting perf_buffer on old kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
Change sanitization process to preserve original BTF, which might be used by
libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old
and doesn't support BTF. To achieve that, if libbpf detects the need for BTF
sanitization, it would clone original BTF, sanitize it in-place, attempt to
load it into kernel, and if successful, will preserve loaded BTF FD in
original `struct btf`, while freeing sanitized local copy.
If kernel doesn't support any BTF, original btf and btf_ext will still be
preserved to be used later for CO-RE relocation and other BTF-dependent libbpf
features, which don't dependon kernel BTF support.
Patch takes care to not specify BTF and BTF.ext features when loading BPF
programs and/or maps, if it was detected that kernel doesn't support BTF
features.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-4-andriin@fb.com
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF
finalization should fail. So make it strict and return error if it fails. This
makes CO-RE relocation more reliable, as they are not going to be just
silently skipped, if BTF finalization failed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-2-andriin@fb.com
Add auto-detection for the cgroup/sock_release programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-3-sdf@google.com
Currently, bpf_object__load() (and by induction skeleton's load), will always
attempt to prepare, relocate, and load into kernel every single BPF program
found inside the BPF object file. This is often convenient and the right thing
to do and what users expect.
But there are plenty of cases (especially with BPF development constantly
picking up the pace), where BPF application is intended to work with old
kernels, with potentially reduced set of features. But on kernels supporting
extra features, it would like to take a full advantage of them, by employing
extra BPF program. This could be a choice of using fentry/fexit over
kprobe/kretprobe, if kernel is recent enough and is built with BTF. Or BPF
program might be providing optimized bpf_iter-based solution that user-space
might want to use, whenever available. And so on.
With libbpf and BPF CO-RE in particular, it's advantageous to not have to
maintain two separate BPF object files to achieve this. So to enable such use
cases, this patch adds ability to request not auto-loading chosen BPF
programs. In such case, libbpf won't attempt to perform relocations (which
might fail due to old kernel), won't try to resolve BTF types for
BTF-aware (tp_btf/fentry/fexit/etc) program types, because BTF might not be
present, and so on. Skeleton will also automatically skip auto-attachment step
for such not loaded BPF programs.
Overall, this feature allows to simplify development and deployment of
real-world BPF applications with complicated compatibility requirements.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-2-andriin@fb.com
Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP. This is consistent
with other prog types like tracing.
Fixes: 2778797037 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul
Prevent loading/parsing vmlinux BTF twice in some cases: for CO-RE relocations
and for BTF-aware hooks (tp_btf, fentry/fexit, etc).
Fixes: a6ed02cac6 ("libbpf: Load btf_vmlinux only once per object.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200624043805.1794620-1-andriin@fb.com
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.
Adjust one of bpf_iter selftest to exhibit this pattern.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
Add support for another (in addition to existing Kconfig) special kind of
externs in BPF code, kernel symbol externs. Such externs allow BPF code to
"know" kernel symbol address and either use it for comparisons with kernel
data structures (e.g., struct file's f_op pointer, to distinguish different
kinds of file), or, with the help of bpf_probe_user_kernel(), to follow
pointers and read data from global variables. Kernel symbol addresses are
found through /proc/kallsyms, which should be present in the system.
Currently, such kernel symbol variables are typeless: they have to be defined
as `extern const void <symbol>` and the only operation you can do (in C code)
with them is to take its address. Such extern should reside in a special
section '.ksyms'. bpf_helpers.h header provides __ksym macro for this. Strong
vs weak semantics stays the same as with Kconfig externs. If symbol is not
found in /proc/kallsyms, this will be a failure for strong (non-weak) extern,
but will be defaulted to 0 for weak externs.
If the same symbol is defined multiple times in /proc/kallsyms, then it will
be error if any of the associated addresses differs. In that case, address is
ambiguous, so libbpf falls on the side of caution, rather than confusing user
with randomly chosen address.
In the future, once kernel is extended with variables BTF information, such
ksym externs will be supported in a typed version, which will allow BPF
program to read variable's contents directly, similarly to how it's done for
fentry/fexit input arguments.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-3-andriin@fb.com
Switch existing Kconfig externs to be just one of few possible kinds of more
generic externs. This refactoring is in preparation for ksymbol extern
support, added in the follow up patch. There are no functional changes
intended.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-2-andriin@fb.com
Add a bunch of getter for various aspects of BPF map. Some of these attribute
(e.g., key_size, value_size, type, etc) are available right now in struct
bpf_map_def, but this patch adds getter allowing to fetch them individually.
bpf_map_def approach isn't very scalable, when ABI stability requirements are
taken into account. It's much easier to extend libbpf and add support for new
features, when each aspect of BPF map has separate getter/setter.
Getters follow the common naming convention of not explicitly having "get" in
its name: bpf_map__type() returns map type, bpf_map__key_size() returns
key_size. Setters, though, explicitly have set in their name:
bpf_map__set_type(), bpf_map__set_key_size().
This patch ensures we now have a getter and a setter for the following
map attributes:
- type;
- max_entries;
- map_flags;
- numa_node;
- key_size;
- value_size;
- ifindex.
bpf_map__resize() enforces unnecessary restriction of max_entries > 0. It is
unnecessary, because libbpf actually supports zero max_entries for some cases
(e.g., for PERF_EVENT_ARRAY map) and treats it specially during map creation
time. To allow setting max_entries=0, new bpf_map__set_max_entries() setter is
added. bpf_map__resize()'s behavior is preserved for backwards compatibility
reasons.
Map ifindex getter is added as well. There is a setter already, but no
corresponding getter. Fix this assymetry as well. bpf_map__set_ifindex()
itself is converted from void function into error-returning one, similar to
other setters. The only error returned right now is -EBUSY, if BPF map is
already loaded and has corresponding FD.
One lacking attribute with no ability to get/set or even specify it
declaratively is numa_node. This patch fixes this gap and both adds
programmatic getter/setter, as well as adds support for numa_node field in
BTF-defined map.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200621062112.3006313-1-andriin@fb.com
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create
an FD-based kernel bpf_link, for attach types tied to network namespace,
that is BPF_FLOW_DISSECTOR for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com
Support SEC("xdp_devmap*") as a short cut for loading the program with
type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_DEVMAP.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-5-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new API, perf_buffer__consume, can be used as follows:
- When you have a perf ring where wakeup_events is higher than 1,
and you have remaining data in the rings you would like to pull
out on exit (or maybe based on a timeout).
- For low latency cases where you burn a CPU that constantly polls
the queues.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial patch to add the new get{peer,sock}name attach types to the section
definitions in order to hook them up to sock_addr cgroup program type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/7fcd4b1e41a8ebb364754a5975c75a7795051bd2.1589841594.git.daniel@iogearbox.net
This is to be consistent with tracing and lsm programs
which have prefix "bpf_trace_" and "bpf_lsm_" respectively.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180216.2949387-1-yhs@fb.com
When the probe code was failing for any reason ENOTSUP was returned, even
if this was due to not having enough lock space. This patch fixes this by
returning EPERM to the user application, so it can respond and increase
the RLIMIT_MEMLOCK size.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/158927424896.2342.10402475603585742943.stgit@ebuild
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200507185057.GA13981@embeddedor
Two new libbpf APIs are added to support bpf_iter:
- bpf_program__attach_iter
Given a bpf program and additional parameters, which is
none now, returns a bpf_link.
- bpf_iter_create
syscall level API to create a bpf iterator.
The macro BPF_SEQ_PRINTF are also introduced. The format
looks like:
BPF_SEQ_PRINTF(seq, "task id %d\n", pid);
This macro can help bpf program writers with
nicer bpf_seq_printf syntax similar to the kernel one.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175917.2476936-1-yhs@fb.com
Some versions of GCC falsely detect that vi might not be initialized. That's
not true, but let's silence it with NULL initialization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430021436.1522502-1-andriin@fb.com
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
Factor out map creation and destruction logic to simplify code and especially
error handling. Also fix map FD leak in case of partially successful map
creation during bpf_object load operation.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-3-andriin@fb.com
bpf_object__load() has various return code, when it failed to load
object, it must return err instead of -EINVAL.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200426063635.130680-3-maowenan@huawei.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
Add bpf_program__attach_cgroup(), which uses BPF_LINK_CREATE subcommand to
create an FD-based kernel bpf_link. Also add low-level bpf_link_create() API.
If expected_attach_type is not specified explicitly with
bpf_program__set_expected_attach_type(), libbpf will try to determine proper
attach type from BPF program's section definition.
Also add support for bpf_link's underlying BPF program replacement:
- unconditional through high-level bpf_link__update_program() API;
- cmpxchg-like with specifying expected current BPF program through
low-level bpf_link_update() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-4-andriin@fb.com
Since BPF_PROG_TYPE_LSM uses the same attaching mechanism as
BPF_PROG_TYPE_TRACING, the common logic is refactored into a static
function bpf_program__attach_btf_id.
A new API call bpf_program__attach_lsm is still added to avoid userspace
conflicts if this ever changes in the future.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-7-kpsingh@chromium.org
For internal maps (most notably the maps backing global variables), libbpf
uses an internal mmaped area to store the data after opening the object.
This data is subsequently copied into the kernel map when the object is
loaded.
This adds a function to set a new value for that data, which can be used to
before it is loaded into the kernel. This is especially relevant for RODATA
maps, since those are frozen on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-1-toke@redhat.com
For each prog/btf load we allocate and free 16 megs of verifier buffer.
On production systems it doesn't really make sense because the
programs/btf have gone through extensive testing and (mostly) guaranteed
to successfully load.
Let's assume successful case by default and skip buffer allocation
on the first try. If there is an error, start with BPF_LOG_BUF_SIZE
and double it on each ENOSPC iteration.
v3:
* Return -ENOMEM when can't allocate log buffer (Andrii Nakryiko)
v2:
* Don't allocate the buffer at all on the first try (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325195521.112210-1-sdf@google.com
Has been unused since commit ef99b02b23 ("libbpf: capture value in BTF
type info for BTF-defined map defs").
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325113655.19341-1-tklauser@distanz.ch
When finding target type candidates, ignore forward declarations, functions,
and other named types of incompatible kind. Not doing this can cause false
errors. See [0] for one such case (due to struct pt_regs forward
declaration).
[0] https://github.com/iovisor/bcc/pull/2806#issuecomment-598543645
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-3-andriin@fb.com
Needs for application BTF being present differs between user-space libbpf needs and kernel
needs. Currently, BTF is mandatory only in kernel only when BPF application is
using STRUCT_OPS. While libbpf itself relies more heavily on presense of BTF:
- for BTF-defined maps;
- for Kconfig externs;
- for STRUCT_OPS as well.
Thus, checks for presence and validness of bpf_object's BPF needs to be
performed separately, which is patch does.
Fixes: 5327644614 ("libbpf: Relax check whether BTF is mandatory")
Reported-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312185033.736911-1-andriin@fb.com
Andrii Nakryiko