Summary: The driver applied the opposite of the DT setting to the
wrong register bit.
The jack plug detect hardware in cs42l42 is somewhat confusing,
compounded by an unclear description in the datasheet. This is most
likely the reason that the driver implemented a DT property for the
wrong register bit, that had the opposite effect of what was
described in the binding.
Changing the meaning of the property values isn't feasible; the
driver dates from 2016 and the risk of breaking out-of-tree configs
is too high (the property is also available to ACPI systems).
So the fix is to make the binding doc match the actual behaviour and
then fix the driver to apply it to the correct register bit.
As a bonus, patch #3 converts the binding to yaml.
Richard Fitzgerald (3):
ASoC: dt-bindings: cs42l42: Correct description of ts-inv
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
ASoC: dt-bindings: cs42l42: Convert binding to yaml
.../devicetree/bindings/sound/cirrus,cs42l42.yaml | 225 +++++++++++++++++++++
.../devicetree/bindings/sound/cs42l42.txt | 114 -----------
MAINTAINERS | 1 +
sound/soc/codecs/cs42l42.c | 9 +-
4 files changed, 230 insertions(+), 119 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt
--
2.11.0
Detect the codec variant in probe function and update DAI link
accordingly. Also add an new entry in enumeration table for machine
driver enumeration.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211028140909.496022-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same codec seems to have different personalities. ESSX8316 was
used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake,
GeminiLake, JasperLake and TigerLake devices.
BugLink: https://github.com/thesofproject/linux/issues/2955
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.
Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
|
v
Jack detect,
button detect and
analog control
As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This swaps the descriptions of the 0 and 1 values to match
what the driver actually does with this property.
The background here is somewhat confusing. The codec has two
invert bits for the tip sense. The DT property should have been
for the TIP_SENSE_INV bit, which is the one that controls the
detect block. Due to some misunderstanding of the hardware the
driver actually implemented setting of the TS_INV bit, which is
only for swapping the sense of the interrupt bits. The description
was taken from the datasheet and refers to TIP_SENSE_INV but
unfortunately TS_INV has a different purpose and the net effect
of changing it is the reverse of what was intended (this is not
clearly described in the datasheet). So the ts-inv settings have
always done the exact opposite of what the description said.
Given the age of the driver, it's too late now to swap the meanings
of the values, so the description is changed to match the behaviour.
They have been annotated with the terminology used in the datasheet
to avoid the confusion of which one corresponds to what the datasheet
calls "inverted tip sense".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: da16c55793 ("ASoC: cs42l42: Add devicetree bindings for CS42L42")
Link: https://lore.kernel.org/r/20211028140902.11786-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns:
sound/soc/qcom/qdsp6/topology.c:465:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
sound/soc/qcom/qdsp6/topology.c:465:3: note: insert 'break;' to avoid fall-through
default:
^
break;
1 warning generated.
Clang is a little more pedantic than GCC, which permits implicit
fallthroughs to cases that contain just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to fix
the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1495
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211027190823.4057382-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_AMD_RENOIR_MACH or SND_SOC_AMD_RV_RT5682_MACH
are selected, and GPIOLIB is not selected, Kbuild gives
the following warnings, respectively:
WARNING: unmet direct dependencies detected for SND_SOC_DMIC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_AMD_RENOIR_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_RENOIR [=y]
and
WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
This is because SND_SOC_DMIC and SND_SOC_MAX98357A are
selected by SND_SOC_AMD_RV_RT5682_MACH and SND_SOC_AMD_RENOIR_MACH,
respectively. However, neither of the selectors depend on or select GPIOLIB,
despite their selectees depending on GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20211027184835.112916-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The series of features will make general and simple for new sof machine driver.
David Lin (2):
ASoC: nau8825: add set_jack coponment support
ASoC: nau8825: add clock management for power saving
sound/soc/codecs/nau8825.c | 48 ++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
We have configurations for this codec on APL, GLK and TGL, somehow the
information that some designs rely on JasperLake was not shared.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 790049fb66 ('ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027023311.25005-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, platform_device_register_data() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e646b51f5d ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211027065228.833825-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports the following warning:
sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: warning: Identical
condition and return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/rockchip/rockchip_i2s_tdm.c:594:6: note: If condition 'ret'
is true, the function will return/exit
if (ret)
^
sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: note: Returning identical
expression 'ret'
return ret;
^
While the code is not wrong, it's clearer to return 0 directly.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports the following warning:
sound/soc/mediatek/mt8195/mt8195-dai-etdm.c:1299:10: style: Variable
'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
The suggested change aligns the implementation of
mt8195_afe_disable_etdm() with mt8195_afe_enable_etdm() - same
negative return value upon error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/mediatek/common/mtk-afe-fe-dai.c:353:8: style: Variable 'i'
is assigned a value that is never used. [unreadVariable]
int i = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports a false positive
sound/soc/codecs/nau8821.c:390:17: error: Array 'dmic_speed_sel[4]'
accessed at index 4, which is out of bounds. [arrayIndexOutOfBounds]
dmic_speed_sel[i].param, dmic_speed_sel[i].val);
^
sound/soc/codecs/nau8821.c:378:2: note: After for loop, i has value 4
for (i = 0 ; i < 4 ; i++)
^
sound/soc/codecs/nau8821.c:390:17: note: Array index out of bounds
dmic_speed_sel[i].param, dmic_speed_sel[i].val);
^
While the code is not incorrect, we can deal with the out-of-bounds
check in a clearer way that makes static analysis happy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 reports warnings:
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'component' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'pll_id' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'source' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Excess function parameter
'codec' description in 'nau8821_set_fll'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse reports the following warnings:
sound/soc/codecs/rt5682s.c:44:12: error: symbol 'rt5682s_supply_names'
was not declared. Should it be static?
sound/soc/codecs/rt5682s.c:74:26: error: symbol 'rt5682s_reg' was not
declared. Should it be static?
sound/soc/codecs/rt5682s.c:2841:30: error: symbol
'rt5682s_aif1_dai_ops' was not declared. Should it be static?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver probe and remove were inconsistent in what they did to power-down
and neither did all steps. In addition to that, neither function
prevented the interrupt handler from running during and after power-down.
Richard Fitzgerald (2):
ASoC: cs42l42: Reset and power-down on remove() and failed probe()
ASoC: cs42l42: free_irq() before powering-down on probe() fail
sound/soc/codecs/cs42l42.c | 43 +++++++++++++++++++++++++++++++------------
1 file changed, 31 insertions(+), 12 deletions(-)
--
2.11.0
This patch set is to add support for lpass sc7280 based targets.
Upadate compatible name and change of bulk clock voting to optional
clock voting in digital codecs va, rx, tx macro drivers.
Changes Since V3:
-- Removed fixes tag.
-- Change signedoff by sequence.
Changes Since V2:
-- Add Tx macro deafults for lpass sc7280
Changes Since V1:
-- Removed individual clock voting and used bulk clock optional.
-- Removed volatile changes and fixed default values.
-- Typo errors.
Srinivasa Rao Mandadapu (5):
ASoC: qcom: Add compatible names in va,wsa,rx,tx codec drivers for
sc7280
ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital
codecs
ASoC: codecs: tx-macro: Enable tx top soundwire mic clock
ASoC: codecs: tx-macro: Update tx default values
ASoC: codecs: Change bulk clock voting to optional voting in digital
codecs
.../bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-tx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-va-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 4 +++-
sound/soc/codecs/lpass-rx-macro.c | 3 ++-
sound/soc/codecs/lpass-tx-macro.c | 25 +++++++++++++++++++---
sound/soc/codecs/lpass-va-macro.c | 3 ++-
sound/soc/codecs/lpass-wsa-macro.c | 1 +
8 files changed, 39 insertions(+), 9 deletions(-)
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Hi Mark,
This version is a respin of v10 fixing a build error in 12/17 patch.
QCOM SoC relevant non-audio patches in this series has been merged into
the Qualcomm drivers-for-5.16 tree, as this series depends those patches
an immutable tag is available at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.gittags/20210927135559.738-6-srinivas.kandagatla@linaro.org
This patchset adds ASoC driver support to configure signal processing
framework ("AudioReach") which is integral part of Qualcomm next
generation audio SDK and will be deployed on upcoming Qualcomm chipsets.
It makes use of ASoC Topology to load graphs on to the DSP which is then
managed by APM (Audio Processing Manager) service to prepare/start/stop.
Here is simplified high-level block diagram of AudioReach:
___________________________________________________________
| CPU (Application Processor) |
| +---------+ +---------+ +----------+ |
| | q6apm | | q6apm | | q6apm | |
| | dais | <------> | | <-----> |lpass-dais| |
| +---------+ +---------+ +----------+ |
| ^ ^ |
| | | +---------+ |
| +---------+ v +---------->|topology | |
| | q6prm | +---------+ | | |
| | |<-------->| GPR | +---------+ |
| +---------+ +---------+ |
| ^ ^ |
| | | |
| +----------+ | |
| | q6prm | | |
| |lpass-clks| | |
| +----------+ | |
|____________________________|______________________________|
|
| RPMSG (IPC over GLINK)
____________________________|______________________________
| | |
| +-----------------------+ |
| | | |
| v v q6 (Audio DSP) |
|+-----+ +----------------------------------+ |
|| PRM | | APM (Audio Processing Manager) | |
|+-----+ | . Graph Management | |
| | . Command Handing | |
| | . Event Management | |
| | ... | |
| +----------------------------------+ |
| ^ |
|____________________________|______________________________|
|
| LPASS AIF
____________________________|______________________________
| | Audio I/O |
| v |
| +--------------------------------------------------+ |
| | Audio devices | |
| | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| |
| | | |
| +--------------------------------------------------+ |
|___________________________________________________________|
AudioReach has constructs of sub-graph, container and modules.
Each sub-graph can have N containers and each Container can have N Modules
and connections between them can be linear or non-linear.
An audio function can be realized with one or many connected
sub-graphs. There are also control/event paths between modules that can
be wired up while building graph to achieve various control mechanism
between modules. These concepts of Sub-Graph, Containers and Modules
are represented in ASoC topology.
Here is simple I2S graph with a Write Shared Memory and a
Volume control module within a single Subgraph (1) with one Container (1)
and 5 modules.
____________________________________________________________
| Sub-Graph [1] |
| _______________________________________________________ |
| | Container [1] | |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| |
| |_______________________________________________________| |
|____________________________________________________________|
For now this graph is split into two subgraphs to achieve dpcm like below:
________________________________________________ _________________
| Sub-Graph [1] | | Sub-Graph [2] |
| ____________________________________________ | | _____________ |
| | Container [1] | | | |Container [2]| |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | |
| |____________________________________________| | | |_____________| |
|________________________________________________| |_________________|
_________________
| Sub-Graph [3] |
| _____________ |
| |Container [3]| |
| | [DMA-EP] | |
| |_____________| |
|_________________|
This patchset adds very minimal support for AudioReach which includes
supporting sub-graphs containing CODEC DMA ports and simple PCM
Decoder/Encoder and Logger Modules. Additional capabilities will
be built over time to expose features offered by AudioReach.
This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5
and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via
VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio
via I2S.
First 10 Patches are mostly reorganization existing Old QDSP Audio
Framework code and bindings so that we could reuse them on AudioReach.
ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at
https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/
and Qualcomm AudioReach DSP headers are available at:
https://source.codeaurora.org/quic/la/platform/vendor/opensource/arspf-headers
Note: There is one false positive warning in this patchset:
audioreach.c:80:45: warning: array of flexible structures
Thanks,
srini
Changes since v10:
- fix build error during arm64 defconfig build reported by Mark in 12/17 patch
for audioreach_tplg_init symbol
Srinivas Kandagatla (17):
ASoC: dt-bindings: move LPASS dai related bindings out of q6afe
ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe
ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h
ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file
ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file
ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible
ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible
ASoC: dt-bindings: add q6apm digital audio stream bindings
ASoC: qdsp6: audioreach: add basic pkt alloc support
ASoC: qdsp6: audioreach: add q6apm support
ASoC: qdsp6: audioreach: add module configuration command helpers
ASoC: qdsp6: audioreach: add Kconfig and Makefile
ASoC: qdsp6: audioreach: add topology support
ASoC: qdsp6: audioreach: add q6apm-dai support
ASoC: qdsp6: audioreach: add q6apm lpass dai support
ASoC: qdsp6: audioreach: add q6prm support
ASoC: qdsp6: audioreach: add support for q6prm-clocks
.../devicetree/bindings/sound/qcom,q6afe.txt | 181 ---
.../bindings/sound/qcom,q6apm-dai.yaml | 53 +
.../sound/qcom,q6dsp-lpass-clocks.yaml | 77 ++
.../sound/qcom,q6dsp-lpass-ports.yaml | 205 +++
include/dt-bindings/sound/qcom,q6afe.h | 203 +--
.../sound/qcom,q6dsp-lpass-ports.h | 208 +++
include/uapi/sound/snd_ar_tokens.h | 208 +++
sound/soc/qcom/Kconfig | 22 +
sound/soc/qcom/qdsp6/Makefile | 11 +-
sound/soc/qcom/qdsp6/audioreach.c | 1130 +++++++++++++++++
sound/soc/qcom/qdsp6/audioreach.h | 726 +++++++++++
sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +--
sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +---------
sound/soc/qcom/qdsp6/q6apm-dai.c | 416 ++++++
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 260 ++++
sound/soc/qcom/qdsp6/q6apm.c | 822 ++++++++++++
sound/soc/qcom/qdsp6/q6apm.h | 152 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 +
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 +
sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++
sound/soc/qcom/qdsp6/q6prm.c | 202 +++
sound/soc/qcom/qdsp6/q6prm.h | 78 ++
sound/soc/qcom/qdsp6/topology.c | 1113 ++++++++++++++++
25 files changed, 6664 insertions(+), 1227 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
create mode 100644 include/uapi/sound/snd_ar_tokens.h
create mode 100644 sound/soc/qcom/qdsp6/audioreach.c
create mode 100644 sound/soc/qcom/qdsp6/audioreach.h
create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.h
create mode 100644 sound/soc/qcom/qdsp6/topology.c
--
2.21.0
All configuration symbols for AMD Audio ACP conponents depend on X86 &&
PCI, except for SND_SOC_AMD_ACP_COMMON. Add a dependency on X86 && PCI
to SND_SOC_AMD_ACP_COMMON, to prevent asking the user about AMD Audio
ACP support when configuring a kernel without X86 or PCI support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/30fcedce513186bf89f1f2655b665298250fdc66.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
If not all of CONFIG_X86, CONFIG_PCI, and CONFIG_I2C are set:
WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && X86 && PCI [=y] && I2C [=y]
Selected by [y]:
- SND_SOC_AMD_LEGACY_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
- SND_SOC_AMD_SOF_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
As SND_SOC_AMD_MACH_COMMON depends on X86 && PCI && I2C, all symbols
selecting it should depend on X86 && PCI && I2C, too.
Fixes: 9d8a7be88b ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Fixes: 9f84940f50 ("ASoC: amd: acp: Add SOF audio support on Chrome board")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/dfb03bd33117e26f3f04ce227bb28095109b3d80.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The build only descends into sound/soc/amd/acp/ if
CONFIG_SND_SOC_AMD_ACP_COMMON=y. Hence all later config symbols should
depend on SND_SOC_AMD_ACP_COMMON, to prevent asking the user about
config symbols for driver code that won't be build anyway.
Fixes: 623621a9f9 ("ASoC: amd: Add common framework to support I2S on ACP SOC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/53d1d63bed1865293e6f5085ead21cdbb068fb15.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Relying on devm to free the irq handler on probe failure leaves a
small window of opportunity for an interrupt to become pending and
then the handler to run after the chip has been reset and powered
off.
For safety cs42l42_probe() should free the irq in the error path.
As the irq is now disabled by the driver in probe() and remove()
there is no point allocating it as a devres-managed item, so
convert to plain non-devres.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211026125722.10220-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver remove() should assert RESET and disable the supplies.
probe() fail was disabling supplies but it didn't assert reset or
put the codec into a power-down state.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211026125722.10220-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to q6prm (Proxy Resource Manager) module used for clock resources
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-17-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Audio port dais on LPASS Audio IP using
existing common q6dsp-lpass-ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-16-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to pcm dais in Audio Process Manager.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-15-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all the code for audioreach and q6apm are in at this point to be
able to compile, start adding Kconfig and Makefile changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-13-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Audioreach module configuration helpers, which will be used by
the q6apm-dai driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-12-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to q6apm (Audio Process Manager) component which is
core Audioreach service running in the DSP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-11-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On AudioReach audio Framework, Audio Streams (PCM/Compressed) are managed by
Q6APM(Audio Process Manager) service. This patch adds bindings for this DAIs
exposed by the DSP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On AudioReach audio Framework access to LPASS ports is via Q6PRM
(Proxy Resource Manager) service, so add a dedicated lpass-clock compatible
string for this.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
on AudioReach audio Framework access to LPASS ports is via
Q6APM(Audio Process Manager) service, so add a dedicated compatible
string for this.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move common parts of q6afe-clocks to q6dsp-lpass-clocks so that we could
reuse most of the driver for new Q6DSP audio frameworks.
This is to make the code reuseable for new Q6DSP AudioReach framework.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Various Q6DSP frameworks will use LPASS Audio IP, so move all the hardware
specific details to a common file so that they could be reused across
multiple Q6DSP frameworks.
In this case all the audio ports definitions can be moved to a common file
to be able to reuse across multiple Q6DSP frameworks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
move all LPASS audio ports defines from q6afe.h to q6dsp-lpass-ports.h
as these belong to LPASS IP.
Also this move helps in reusing this header across multiple audio
frameworks on Qualcomm Audio DSP.
This patch is split out of the dt-bindings patch to enable easy review.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
q6afe (Audio Front End) is one of the DSP service that handles both
LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks.
As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP.
In order to allow multiple DSP frameworks to use these bindings
its best to move it out from the dsp specific bindings.
For compatibility reasons and not breaking which is already working
we still maintain same compatible string "qcom,q6afe-clocks"
Also as part of this change convert these LPASS clocks related bindings
into yaml format.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
q6afe (Audio Front End) is one of the DSP service that handles both
LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks.
As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP.
In order to allow multiple DSP frameworks to use these bindings
its best to move it out from the dsp specific bindings.
For compatibility reasons and not breaking which is already working
we still maintain same compatible string "qcom,q6afe-dais"
Also as part of this change convert these LPASS dai related bindings
into yaml format.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
-----BEGIN PGP SIGNATURE-----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=r7vf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF3+W4ACgkQJNaLcl1U
h9C+DQf7Bxzz7xjGv5AFyZ8eZbAx0LnTBp9SytON2gh5mxWGUCI0kxSdnEd/ot9u
PUhWMf7192kQw4qmkZArdtKiaxhZdKZvXZ0kTfyoTvcR4o9fdgWtMUla5QhBVzAu
UgZbTH91wDt4P68cYzLrhG8gFlagzSwRT8WF4imJmcJsehPq22Nz70tK5tSePZko
KcbnpkqYV19CQRJsEKXBivAptpE/oAQJBSoYVw/gkizqrznNGI2cqWBl+krGOdBW
zI+CZbzuAwTi9xNu3tmlcgPDGxOHYFVU7aIy2w/ENNRsAbWgFThcO25pWBKROtKc
45uC5fj24R6cCCyuygwFJuLoeRy31Q==
=ts3p
-----END PGP SIGNATURE-----
Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach support
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
Mark Brown