The driver uses the string "slcan" to populate
tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "slcan". Use
KBUILD_MODNAME to get rid on the hardcoded string names.
Similarly, the pr_info() and pr_err() hardcoded the "slcan"
prefix. Define pr_fmt so that the "slcan" prefix gets automatically
added.
CC: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.
It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().
As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.
Fixes: 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The net_eq() check is already performed inside
devlinks_xa_for_each_registered_get() helper, so remove the redundant
appearance.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220727055912.568391-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115650.100726-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A NULL pointer dereference was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__list_del_entry_valid+0x26/0x80
Call Trace:
<TASK>
sctp_sched_dequeue_common+0x1c/0x90
sctp_sched_prio_dequeue+0x67/0x80
__sctp_outq_teardown+0x299/0x380
sctp_outq_free+0x15/0x20
sctp_association_free+0xc3/0x440
sctp_do_sm+0x1ca7/0x2210
sctp_assoc_bh_rcv+0x1f6/0x340
This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.
As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.
Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The crc16() function is used to check the firmware validity, but
the library was not explicitly selected.
Fixes: 3c3673bde5 ("ptp: ocp: Add firmware header checks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vadfed@fb.com>
Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit, IPv4 SYN packets handled
by a dual stack IPv6 socket are dropped, even if
perfectly valid.
$ nstat | grep MD5
TcpExtTCPMD5Failure 5 0.0
For a dual stack listener, an incoming IPv4 SYN packet
would call tcp_inbound_md5_hash() with @family == AF_INET,
while tp->af_specific is pointing to tcp_sock_ipv6_specific.
Only later when an IPv4-mapped child is created, tp->af_specific
is changed to tcp_sock_ipv6_mapped_specific.
Fixes: 7bbb765b73 ("net/tcp: Merge TCP-MD5 inbound callbacks")
Reported-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure
for the perf tool on mips and possibly others.
-----BEGIN PGP SIGNATURE-----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=2fva
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure for
the perf tool on mips and possibly others"
* tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: remove a broken and needless ifdef conditional
tools: Fixed MIPS builds due to struct flock re-definition
One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address
-----BEGIN PGP SIGNATURE-----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=n1qH
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address"
* tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa2xx: Fix GPIO descriptor tables
mailmap: update Baolin Wang's email
ARM: dts: lan966x: fix sys_clk frequency
So far the vmtest.sh script, which can be used as a convenient way to
run bpf selftests, has obtained the kernel config safe to use for
testing from the libbpf/libbpf GitHub repository [0].
Given that we now have included this configuration into this very
repository, we can just consume it from here as well, eliminating the
necessity of remote accesses.
With this change we adjust the logic in the script to use the
configuration from below tools/testing/selftests/bpf/configs/ instead
of pulling it over the network.
[0] https://github.com/libbpf/libbpf
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Link: https://lore.kernel.org/bpf/20220727001156.3553701-4-deso@posteo.net
This change integrates libbpf maintained configurations and black/white
lists [0] into the repository, co-located with the BPF selftests themselves.
We minimize the kernel configurations to keep future updates as small as
possible [1].
Furthermore, we make both kernel configurations build on top of the existing
configuration tools/testing/selftests/bpf/config (to be concatenated before
build). Lastly, we replaced the terms blacklist & whitelist with denylist and
allowlist, respectively.
[0] 20f0330235/travis-ci/vmtest/configs
[1] https://lore.kernel.org/bpf/20220712212124.3180314-1-deso@posteo.net/T/#m30a53648352ed494e556ac003042a9ad0a8f98c6
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Link: https://lore.kernel.org/bpf/20220727001156.3553701-3-deso@posteo.net
This change makes sure to sort the existing minimal kernel configuration
containing options required for running BPF selftests alphabetically.
Doing so will make it easier to diff it against other configurations,
which in turn helps with maintaining disjunct config files that build on
top of each other. It also helped identify the CONFIG_IPV6_GRE being set
twice and removes one of the occurrences.
Lastly, we change NET_CLS_BPF from 'm' to 'y'. Having this option as 'm'
will cause failures of the btf_skc_cls_ingress selftest.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Link: https://lore.kernel.org/bpf/20220727001156.3553701-2-deso@posteo.net
For consistency, use an existing 'iftype' element which was already
having the interface type. Replace 'mode' with 'iftype' as it was used
for the same purpose.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-8-ajay.kathat@microchip.com
Similar to SPI priv data, add 'isinit' variable in SDIO priv. Make use
of the state to invoke hif_init() once, and acquire the lock before
accessing hif function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-7-ajay.kathat@microchip.com
Cancel the ongoing connection request to avoid any issue if the
interface is set down before the connection request is completed.
host_int_handle_disconnect was already available, so renamed it and used
the same API for 'ndio_close' cb.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-6-ajay.kathat@microchip.com
For string type WID packet, the data length is received as 16-bit value
so use 'get_unaligned_le16' conversion API to extract the correct length.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-5-ajay.kathat@microchip.com
Set 'close' variable to '1' to indicate closing operation when
initialisation fails during wlan_initialize_threads() call.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-3-ajay.kathat@microchip.com
WID_TX_POWER WID value is fetched from the firmware so it should be
added in'g_cfg_byte' array to store the data which is received from
firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-2-ajay.kathat@microchip.com
No need to initialise static variables to zero.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
[kvalo@kernel.org: improve commit log]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720194245.8442-1-gaoxin@cdjrlc.com
Eliminate the follow smatch warning:
drivers/net/wireless/broadcom/b43legacy/main.c:2947 b43legacy_wireless_core_stop() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220719075637.111716-1-yang.lee@linux.alibaba.com
When the driver fails at ieee80211_alloc_hw() at the probe time, the
driver will free the 'hw' which is not allocated, causing a bug.
The following log can reveal it:
[ 15.981294] BUG: KASAN: user-memory-access in mutex_is_locked+0xe/0x40
[ 15.981558] Read of size 8 at addr 0000000000001ab0 by task modprobe/373
[ 15.982583] Call Trace:
[ 15.984282] ieee80211_free_hw+0x22/0x390
[ 15.984446] rtl8xxxu_probe+0x3a1/0xab30 [rtl8xxxu]
Fix the bug by changing the order of the error handling.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220716130444.2950690-1-zheyuma97@gmail.com
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
(in wlcore_probe()) and so wl is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220715224619.ht7bbzzrmysielm7@pengutronix.de
Eliminate the follow smatch warning:
drivers/net/wireless/marvell/mwifiex/pcie.c:3364 mwifiex_unregister_dev() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220615005316.9596-1-yang.lee@linux.alibaba.com
Wenjia Zhang says:
====================
net/smc: updates 2022-07-25
please apply the following patches to netdev's net-next tree.
These patches do some preparation to make ISM available for uses beyond
SMC-D, and a bunch of cleanups.
v2: add "Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the smc and smc_diag modules were automatically loaded as
dependencies of the ism module whenever an ISM device was present.
With the pending rework of the ISM API, the smc module will no longer
automatically be loaded in presence of an ISM device. Usage of an AF_SMC
socket will still trigger loading of the smc modules, but usage of a
netlink socket will not.
This is addressed by setting the correct module aliases.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the DMBE bits, which are passed on individually in ism_move() as
parameter idx, available to the receiver.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reworked signature of the function to retrieve the system EID: No plausible
reason to use a double pointer. And neither to pass in the device as an
argument, as this identifier is by definition per system, not per device.
Plus some minor consistency edits.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This struct is used in a single place only, and its usage generates
inefficient code. Time to clean up!
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-and-tested-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].
Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.
[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42
CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0xbb/0x6ac
? _printk+0xad/0xde
? refill_work+0x43/0xd4
kasan_report+0xa8/0x130
? refill_work+0x43/0xd4
refill_work+0x43/0xd4
process_one_work+0x43d/0x780
worker_thread+0x2a0/0x6f0
? process_one_work+0x780/0x780
kthread+0x167/0x1a0
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
...
Fixes: b2baed69e6 ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
====================
The c_can, flexcan and slcan use a setter function to populate
net_device::ethtool_ops. Using a setter here add one additional
function call and add some small bloat in the object file. Exporting
the structure allow to remove this setter.
The mcp251xfd uses a similar pattern except that it does some
additional initialization. As such, this driver is left untouched.
* Statistics *
For the slcan driver, this patch reduces the object file by 14 bytes
(details in the first patch). Although we did not conduct a benchmark
for the other drivers but we expect the exact same figures.
====================
Link: https://lore.kernel.org/all/20220727104939.279022-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function flexcan_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export flexcan_ethtool_ops so it becomes visible to
flexcan-core.c.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function c_can_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export c_can_ethtool_ops so it becomes visible to
c_can_main.c.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function slcan_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export slcan_ethtool_ops so it becomes visible to
sclan-core.c.
This patch reduces the footprint by 14 bytes:
| $ ./scripts/bloat-o-meter drivers/net/can/slcan/slcan.{old,new}.o
| drivers/net/can/slcan/slcan.o
| add/remove: 0/1 grow/shrink: 1/0 up/down: 15/-29 (-14)
| Function old new delta
| slcan_open 1010 1025 +15
| slcan_set_ethtool_ops 29 - -29
| Total: Before=11115, After=11101, chg -0.13%
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When building with Clang we encounter these warnings:
| drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1108:47: error:
| format specifies type 'unsigned char' but the argument has type 's16'
| (aka 'short') [-Werror,-Wformat] IWL_DEBUG_INFO(mvm, "\tburst index:
| %hhu\n", res->ftm.burst_index);
-
| drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1111:47: error:
| format specifies type 'unsigned char' but the argument has type 's32'
| (aka 'int') [-Werror,-Wformat] IWL_DEBUG_INFO(mvm, "\trssi spread:
| %hhu\n", res->ftm.rssi_spread);
The previous format specifier `%hhu` describes a u8 but our arguments
are wider than this which means bits are potentially being lost.
Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends using
the promoted-to-type's format flag.
As per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int
can represent all values of the original type ..., the value is
converted to an int; otherwise, it is converted to an unsigned int.
These are called the integer promotions.` Thus it makes sense to change
`%hhu` to `%d` for both instances of the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711222919.2043613-1-justinstitt@google.com
Commit 7a4836560a changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7a4836560a ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()")
Fixes: ff974e4083 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com
Commit 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
regressed QCN9074. With the above mentioned commit, writes are failing
for some registers on QCN9074 although the device seems to work
normally.
ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010
ath11k_pci 0000:03:00.0: failed to set sysclk: -110
PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window
concept for register accesses. There are two schemes, dynamic & static
window.
In dynamic window scheme, a single window(region in the BAR) is mapped
either to CE or DP register windows at any give time. QCA6390 & WCN6855
follow this scheme for register accesses.
In static window scheme, CE & DP register windows are statically mapped
to separate regions with in the BAR so that there is no switching of
register windows between CE & DP register accesses. QCN9074 & WCN6750
follow this scheme although the window start offsets are different for
QCN9074 & WCN6750.
QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively
whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with
2nd & 3rd windows, 1st window is also used for certain configurations
which commit 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
did not account for and hence the regression.
Fix this by going back to the original way of accessing the registers on
QCN9074. Since this diverges from WCN6750 way of accessing registers, it
is required to register window_read32/window_write32() pci_ops for WCN6750.
We can also get rid of dp_window_idx & ce_window_idx members in hw_params,
so remove them.
Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops
to the ath11k core. This API checks for mandatory pci_ops() and reports
error if those are missing. Also initialize unused pci_ops to NULL.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Fixes: 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
Arun Ramadoss says:
====================
net: dsa: microchip: add support for phylink mac config and link up
This patch series add support common phylink mac config and link up for the ksz
series switches. At present, ksz8795 and ksz9477 doesn't implement the phylink
mac config and link up. It configures the mac interface in the port setup hook.
ksz8830 series switch does not mac link configuration. For lan937x switches, in
the part support patch series has support only for MII and RMII configuration.
Some group of switches have some register address and bit fields common and
others are different. So, this patch aims to have common phylink implementation
which configures the register based on the chip id.
Changes in v2
- combined the modification of duplex, tx_pause and rx_pause into single
function.
Changes in v1
- Squash the reading rgmii value from dt to patch which apply the rgmii value
- Created the new function ksz_port_set_xmii_speed
- Seperated the namespace values for xmii_ctrl_0 and xmii_ctrl_1 register
- Applied the rgmii delay value based on the rx/tx-internal-delay-ps
====================
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support for phylink mac config for ksz series of
switches. All the files ksz8795, ksz9477 and lan937x uses the ksz common
xmii function. Instead of calling from the individual files, it is moved
to the ksz common phylink mac config function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the ksz8795 cpu configuration to use the ksz common
xmii set functions.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Mailhol