Update the reserved-memory map to version 3, to adjust to changes in the
remoteprocs.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
According to rock64 schemetic V2 and V3, the VCC_HOST_5V output is
controlled by USB_20_HOST_DRV, which is the same as VCC_HOST1_5V.
V1 hardware was never sold and only V2/V3 is with customers,
so there is no need to keep a seaprate v1 version around.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This includes DSP reserved memory, ADMA DSP device and DSP MU
communication channels description.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add A53 OPP table, cpu regulator and speed grading node to
support cpu-freq driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX8MN DDR4 EVK board, there is a rohm,bd71847 PMIC
on i2c1 bus, enable it.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Nano Media Applications Processor is a new SoC of the i.MX8M
family, it is a 14nm FinFET product of the growing mScale family targeting
the consumer market. It is built in Samsung 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core ARM Cortex-A53 cluster,
Cortex-M7 low-power coprocessor and graphics accelerator.
This patch adds the basic dtsi support for i.MX8MN.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LS1028A has a clock domain PXLCLK0 used for the Display output
interface in the display core, independent of the system bus frequency,
for flexible clock design. This display core has its own pixel clock.
This patch enable the pixel clock provider on the LS1028A.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lx2160a platform, the i2c input clock is actually platform pll CLK / 16
(this is the hardware connection), other clock divider can not get the
correct i2c clock, resulting in the output of SCL pin clock is not
accurate.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ls1028a platform, the i2c input clock is actually platform pll CLK / 4
(this is the hardware connection), other clock divider can not get the
correct i2c clock, resulting in the output of SCL pin clock is not
accurate.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ls1012a platform, the i2c input clock is actually platform pll CLK / 4
(this is the hardware connection), other clock divider can not get the
correct i2c clock, resulting in the output of SCL pin clock is not
accurate.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ls1088a platform, the i2c input clock is actually platform pll CLK / 8
(this is the hardware connection), other clock divider can not get the
correct i2c clock, resulting in the output of SCL pin clock is not
accurate.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the nodes to include little-endian
property to be consistent with the hardware.
Signed-off-by: Song Hui <hui.song_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Thermal Monitoring Unit (TMU) monitors and reports the
temperature from 2 remote temperature measurement sites
located on ls1028a chip.
Add TMU dts node to enable this feature.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50 of Feb
12, 2019, the base address of the IPMMU-VC0 block on R-Car V3H is
0xfe990000.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
* According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
August 24, 2018, the TX clock internal delay mode isn't supported
on R-Car E3 (r8a77990) and D3 (r8a77995).
* TX clock internal delay mode is required for reliable 1Gbps communication
using the KSZ9031RNX phy present on the Ebisu and Draak boards.
Thus, the E3 based Ebisu and D3 based Draak boards can not reliably
use 1Gbps and the speed should be limited to 100Mbps.
Based on work by Kazuya Mizuguchi.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds support for HDMI audio to the device tree
common to the HiHope RZ/G2M and the HiHope RZ/G2N.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
'7d0c76bdf227 ("clk: qcom: Add WCSS gcc clock control for QCS404")'
introduces two new clocks to gcc. These are not used before
clk_disable_unused() and as such the clock framework tries to disable
them.
But on the EVB these registers are only accessible through TrustZone, so
these clocks must be marked as "protected" to prevent the clock code
from touching them.
Numerical values are used as the constants are not yet available in a
common tree.
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
P710 is a RK3399 based SBC, designed by Leez [0].
Specification
- Rockchip RK3399
- 4/2GB LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply
[0]https://leez.lenovo.com
Signed-off-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rockpro64 contains a nor-flash chip connected to spi1.
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
[a number of cleanups]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- a few small DT fixes for g12a/g12b platforms
-----BEGIN PGP SIGNATURE-----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=bMaE
-----END PGP SIGNATURE-----
Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
arm64: dts: Amlogic fixes for v5.3-rc
- a few small DT fixes for g12a/g12b platforms
* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
arm64: dts: meson-g12a-sei510: enable IR controller
arm64: dts: meson-g12a: add missing dwc2 phy-names
Single patch removing optional 'max-memory-bandwidth' property for CLCD
that enables to allocate and use 32bpp buffers(used on FVP for Android
development)
-----BEGIN PGP SIGNATURE-----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=nrQp
-----END PGP SIGNATURE-----
Merge tag 'juno-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno/FVP update for v5.4
Single patch removing optional 'max-memory-bandwidth' property for CLCD
that enables to allocate and use 32bpp buffers(used on FVP for Android
development)
* tag 'juno-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fast models: Remove clcd's max-memory-bandwidth
Link: https://lore.kernel.org/r/20190814172408.25995-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable DVFS for the Odroid-N2 by setting the clock, OPP and supply
for each cores of each CPU clusters.
The first cluster uses the "VDDCPU_B" power supply, and the second
cluster uses the "VDDCPU_A" power supply.
Each power supply can achieve 0.73V to 1.01V using 2 distinct PWM
outputs clocked at 800KHz with an inverse duty-cycle.
DVFS has been tested by running the arm64 cpuburn at [1] and cycling
between all the possible cpufreq translations of each cluster and
checking the final frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:
- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot
A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
A311D SoCs supported by two variants of the board.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Currently there are two nodes named "regulator1" in the Draak DTS: a
3.3V regulator for the eMMC and the LVDS decoder, and a 12V regulator
for the backlight. This causes the former to be overwritten by the
latter.
Fix this by renaming all regulators with numerical suffixes to use named
suffixes, which are less likely to conflict.
Fixes: 4fbd4158fe ("arm64: dts: renesas: r8a77995: draak: Add backlight")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Arm per-CPU architected timers stop ticking in suspend, when the
SCP powers down the CPUs. Flag that in the DT.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Meson g12b ships with a low-speed (S922X) and high-speed (A311D) variant
so remove cpu_opp_table nodes in meson-g12b.dtsi and create two new dtsi
that can be included in device-specific dts files. Opp points were taken
from the vendor BSP kernel.
Also make meson-g12b-odroid-n2.dts include the new meson-g12b-s922x.dtsi.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This enables the video decoder for GXBB, GXL and GXM chips
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the base video decoder node compatible with the meson vdec driver,
for GX* chips.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
If unspecified in DT, the fifo sizes are not automatically detected by
the dwmac1000 dma driver and the reported fifo sizes default to 0.
Because of this, flow control will be turned off on the device.
Add the fifo sizes provided by the datasheets in the SoC in DT so
flow control may be enabled if necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the OPP table taken from the HardKernel Odroid-N2 DTS.
The Amlogic G12B SoC seems to available in 2 types :
- low-speed: Cortex-A73 Cluster up to 1,704GHz
- high-speed: Cortex-A73 Cluster up to 2.208GHz
The Cortex-A73 Cluster can be clocked up to 1,896GHz for both types.
The Vendor Amlogic A311D OPP table are slighly different, with lower
voltages than the HardKernel S922X tables but seems to be high-speed type.
This adds the conservative OPP table with the S922X higher voltages
and the maximum low-speed OPP frequency.
The values were tested to be stable on an HardKernel Odroid-N2 board
running the arm64 cpuburn at [1] and cycling between all the possible
cpufreq translations for both clusters and checking the final frequency
using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable DVFS for the U200, SEI520 and X96-Max Amlogic G12A based board
by setting the clock, OPP and supply for each CPU cores.
The CPU cluster power supply can achieve 0.73V to 1.01V using a PWM
output clocked at 800KHz with an inverse duty-cycle.
DVFS has been tested by running the arm64 cpuburn at [1] and cycling
between all the possible cpufreq translations and checking the final
frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the OPP table taken from the vendor u200 and u211 DTS.
The Amlogic G12A SoC seems to available in 3 types :
- low-speed: up to 1,8GHz
- mid-speed: up to 1,908GHz
- high-speed: up to 2.1GHz
And the S905X2 opp voltages are slightly higher than the S905D2
OPP voltages for the low-speed table.
This adds the conservative OPP table with the S905X2 higher voltages
and the maximum low-speed OPP frequency.
The values were tested to be stable on an Amlogic U200 Reference Board,
SeiRobotics SEI510 and X96 Max Set-Top-Boxes running the arm64 cpuburn
at [1] and cycling between all the possible cpufreq translations and
checking the final frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the ao_pinctrl subnode for the pwm_a function on GPIOE_2.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
To simplify the representation of differences betweem the G12A and G12B
SoCs, move the common nodes into a meson-g12-common.dtsi file and
express the CPU nodes and differences in meson-g12a.dtsi and meson-g12b.dtsi.
This separation will help for DVFS and future Amlogic SM1 Family support.
The sd_emmc_a quirk is added in the g12a/g12b since since it's already
known the sd_emmc_a controller is fixed in the next SM1 SoC family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Longcheer L8150 is a smartphone based on MSM8916 which is
used in several rebrands like the Snapdragon 410
Android One devices or the Wileyfox Swift.
Add a device tree for L8150 with initial support for:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
Co-developed-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Samsung Galaxy A3 (SM-A300FU) and Samsung Galaxy A5 (SM-A500FU)
are smartphones using the MSM8916 SoC released in 2015.
Add a device tree for A3U and A5U with initial support for:
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- Regulators
The two devices (and all other variants of A3/A5 released in 2015)
are very similar, with some differences in display, touchscreen
and sensors. The common parts are shared in
msm8916-samsung-a2015-common.dtsi to reduce duplication.
The device tree is loosely based on apq8016-sbc.dtsi and the
downstream kernel provided by Samsung, mixed with a lot of own
research.
Co-developed-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds Qualcomm Venus video codec DT node for the video
codec hardware found in MSM8996 platforms.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
AOSS hosts resources that can be used to warm up the SoC.
Add nodes for these resources.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on msm8996.
This also adds coresight cpu debug nodes.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on MSM8998.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DT nodes should be ordered by address, then node name, and finally label.
The msm8998 dtsi does not follow this, so clean it up by reordering the
nodes. While we are at it, extend the addresses to be fully 32-bits wide
so that ordering is easy to determine when adding new nodes. Also, two
or so nodes had the wrong address value in their node name (did not match
the reg property), so fix those up as well.
Hopefully going forward, things can be maintained so that a cleanup like
this is not needed.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The thermal trip points have unit name but no reg property, so we can
remove them
arch/arm64/boot/dts/qcom/qcs404.dtsi:1080.31-1084.7: Warning (unit_address_vs_reg): /thermal-zones/aoss-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1095.33-1099.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1110.32-1114.7: Warning (unit_address_vs_reg): /thermal-zones/lpass-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1125.31-1129.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1140.34-1144.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1145.34-1149.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1174.31-1178.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1179.31-1183.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1208.31-1212.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1213.31-1217.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1242.31-1246.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1247.31-1251.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1276.31-1280.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1281.31-1285.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1310.30-1314.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
pms405@1 nodes specified unnecessary #address-cells/#size-cells but the
subnodes dont have "ranges" or "reg" so remove it
arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The adc nodes have reg property but were missing the unit name, so add
that to fix these warnings:
arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Last level cache (aka. system cache) controller provides control
over the last level cache present on SDM845. This cache lies after
the memory noc, right before the DDR.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Node names shouldn't include a vendor prefix and should whenever
possible use a generic identifier. Resolve this by renaming the smmu
nodes "iommu".
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When powering off the Odroid N2, the tflash_vdd regulator is
automatically turned off by the kernel. This is a problem
when issuing the "reboot" command while using an SD card.
The boot ROM does not power this regulator back on, blocking
the reboot process at the boot ROM stage, preventing the
SD card from being detected.
Adding the "regulator-always-on" property fixes the problem.
Signed-off-by: Xavier Ruppen <xruppen@gmail.com>
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: c35f6dc5c3 ("arm64: dts: meson: Add minimal support for Odroid-N2")
[khilman: minor subject change: s/meson/amlogic/]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the IR receiver controller on the SEI510 board.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.
By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.
The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".
Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.
Fixes: 9baf7d6be7 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Power rail "D12.0V" comes straight from the power barrel connector,
and it's used in both main board and sub board.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the new renesas,companion property to the LVDS0 node to point to the
companion LVDS encoder LVDS1.
Based on similar work from Laurent Pinchart for the r8a7799[05].
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[geert: Sort sound child nodes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It is unclear why max-memory-bandwidth should be set for CLCD on the
fast model. Removing that property allows allocating and using 32bpp
buffers, which may be desirable on certain platforms such as
Android.
Reported-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Earlier, the PWM registers were included as part of the pinctrl memory
map, but this turned to be useless as the muxing is being handled by the
SoC pin controller itself. Hence, this commit removes the pwm register
mapping from the pinctrl node to make it more clean.
Fixes: af2ff87de413 ("arm64: dts: bitmain: Add pinctrl support for BM1880 SoC")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add reset controller support for Bitmain BM1880 SoC. This commit also
adds reset support to UART peripherals.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Add opp-suspend property to each OPP, the of opp core will
select the OPP HW supported and with highest rate to be
suspend opp, it will speed up the suspend/resume process.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add opp-suspend property to each OPP, the of opp core will
select the OPP HW supported and with highest rate to be
suspend opp, it will speed up the suspend/resume process.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since fsl-ls1088a Soc GPIO registers are used as little endian,
the patch adds the little-endian attribute to each gpio node.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the console device tree node for the following
DPAA2 based platforms: LS1088A, LS2080A, LS2088A and LX2160A.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TechNexion PICO-PI-IMX8M-DEV evaluation and development kit based on
NXP i.MX8M Quad applications processor. Datasheet can be found at:
https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
The current level of support yields a working console and is able to boot
userspace from NFS or init ramdisk.
Additional subsystems that are active :
- Ethernet
- USB
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Richard Hu <richard.hu@technexion.com>
Signed-off-by: Andra Danciu <andradanciu1997@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch use the optional property node "arm,malidp-arqos-value" to
can be dynamic configure QoS signaling.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for i.MX8QXP AI_ML board from Einfochips. This board is one
of the Consumer Edition boards of the 96Boards family based on i.MX8QXP
SoC from NXP/Freescale.
The initial support includes following peripherals which are tested and
known to be working:
1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet
More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All these at803x properties are not documented anywhere, so
just remove them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the charge controller node. With the controller driver loaded
the VBUS of the user USB socket is controlled exclusively via i2c
with the GPIO controls ignored, so vbus-supply for the user USB
port must be linked to the charge controller.
Hog the previously used GPIO control to unconditionally enable
VBUS until the driver is loaded.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The correct clock for "bus_early", "ref", "suspend" should be:
IMX8MQ_CLK_USB1_CTRL_ROOT, IMX8MQ_CLK_USB_CORE_REF, IMX8MQ_CLK_32K,
especially we may need the right suspend clock rate to set register
in controller driver.
Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MQ has clock gate for TMU module, add clock info to TMU
node for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to latest datasheet (Rev.1, 10/2018) from below links,
in the consumer datasheet, 1.5GHz is mentioned as highest opp but
depends on speed grading fuse, and in the industrial datasheet,
1.3GHz is mentioned as highest opp but depends on speed grading
fuse. 1.5GHz and 1.3GHz opp use same voltage, so no need for
consumer part to support 1.3GHz opp, with same voltage, CPU should
run at highest frequency in order to go into idle as quick as
possible, this can save power.
That means for consumer part, 1GHz/1.5GHz are supported, for
industrial part, 800MHz/1.3GHz are supported, and then check the
speed grading fuse to limit the highest CPU frequency further.
Correct the market segment bits in opp table to make them work
according to datasheets.
https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdfhttps://www.nxp.com/docs/en/data-sheet/IMX8MDQLQCEC.pdf
Fixes: 12629c5c37 ("arm64: dts: imx8mq: Add cpu speed grading and all OPPs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to latest datasheet (Rev.0.2, 04/2019) from below links,
1.8GHz is ONLY available for consumer part, so the market segment
bits for 1.8GHz opp should ONLY available for consumer part accordingly.
https://www.nxp.com/docs/en/data-sheet/IMX8MMIEC.pdfhttps://www.nxp.com/docs/en/data-sheet/IMX8MMCEC.pdf
Fixes: f403a26c86 (arm64: dts: imx8mm: Add cpu speed grading and all OPPs)
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The same ddr perfomance counter IP from 8qxp is also available on imx8m
series so add it to dts.
Tested with `perf stat` and `memtester` on imx8mm-evk and obtained
plausible results.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USB1 port has typec connector with power delivery support:
- Dual data role: host and device.
- Dual power role: source and sink, prefer power sink.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting
for it.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MM pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MQ pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the initial configuration for clocks that need default parent and rate
setting. This is based on the vendor tree clock provider parents and rates
configuration except this is doing the setup in dts rather than using clock
consumer API in a clock provider driver.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LS1028a has one Ethernet management interface. On the QDS board, the
MDIO signals are multiplexed to either on-board AR8035 PHY device or
to 4 PCIe slots allowing for SGMII cards.
To enable the Ethernet ENETC Port 1, which can only be connected to a
RGMII PHY, the multiplexer needs to be configured to route the MDIO to
the AR8035 PHY. The MDIO/MDC routing is controlled by bits 7:4 of FPGA
board config register 0x54, and value 0 selects the on-board RGMII PHY.
The FPGA board config registers are accessible on the i2c bus, at address
0x66.
The PF3 MDIO PCIe integrated endpoint device allows for centralized access
to the MDIO bus. Add the corresponding devicetree node and set it to be
the MDIO bus parent.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[geert: Sort i2c slave nodes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[geert: Sort i2c slave nodes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add SSIU support to the SoC DT as the sound driver supports
it now, and also since the sound driver can now handle
BUSIF0-7 via SSIU remove the no longer needed "rxu" and "txu"
properties.
Based on similar work from Kuninori Morimoto and Simon Horman in commits
8d14bfa074 ("arm64: dts: renesas: r8a7796: add SSIU support for
sound") and 10bd03fa89 ("arm64: dts: renesas: r8a7796: remove BUSIF0
settings from rcar_sound,ssi").
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Basic audio dmac register only supports busif from 0 to 3,
in order to use busif4 ~ busif7 extended audio dmac registers
need to be used.
Based on similar work from Jiada Wang in commit 7a516e49d9 ("arm64:
dts: renesas: use extended audio dmac register").
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables WLAN support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables BT support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable PCA9654 GPIO expander, so that we can configure its GPIOs later.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables both CAN0 and CAN1, both exposed via
connectors found on the expansion board.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add CANFD support to the SoC specific dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Define "assigned-clocks" and "assigned-clock-rates" properties
for CAN[01] DT nodes, as required by the dt-bindings.
Fixes: eccc400029 ("arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Define "assigned-clocks" and "assigned-clock-rates" properties
for CAN[01] DT nodes, as required by the dt-bindings.
Fixes: 036bc85c1d ("arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since the R8A77995 SoC uses DU{0,1}, the range from the base address to
the 0x4000 address is used.
This patch fixed it.
Fixes: 18f1a773e3 ("arm64: dts: renesas: r8a77995: add DU support")
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add CPG reset properties to DU node of D3 (r8a77995) SoC.
According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
level so specifying one reset entry per group is sufficient.
This patch was inspired by a patch in the BSP by
Takeshi Kihara <takeshi.kihara.df@renesas.com>.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add CPG reset properties to DU node of E3 (r8a77990) SoC.
According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
level so specifying one reset entry per group is sufficient.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RockPro64 has a dedicated circuit for driving a 12V fan from PWM1.
At the moment this makes fan spin at full speed. fancontrol can be used
to control fan speed. E.g. the following config file works well:
INTERVAL=10
DEVPATH=hwmon0=devices/platform/pwm-fan
DEVNAME=hwmon0=pwmfan
FCTEMPS=hwmon0/device/pwm1=../thermal/thermal_zone0/temp
MINTEMP=hwmon0/device/pwm1=40
MAXTEMP=hwmon0/device/pwm1=60
MINSTART=hwmon0/device/pwm1=100
MINSTOP=hwmon0/device/pwm1=70
In the future it would be nice to define trip points in dts file,
so that kernel could adjust fan speed itself.
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Unit name is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.
arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading 0s
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Unit address is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x"
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The thermal trip points have unit name but no reg property, so we can
remove them
arch/arm64/boot/dts/qcom/sdm845.dtsi:2824.31-2828.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2830.31-2834.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2868.31-2872.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2874.31-2878.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2912.31-2916.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2918.31-2922.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2956.31-2960.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2962.31-2966.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3000.31-3004.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3006.31-3010.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3044.31-3048.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3050.31-3054.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3088.31-3092.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3094.31-3098.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3132.31-3136.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3138.31-3142.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3176.32-3180.7: Warning (unit_address_vs_reg): /thermal-zones/aoss0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3191.35-3195.7: Warning (unit_address_vs_reg): /thermal-zones/cluster0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3211.35-3215.7: Warning (unit_address_vs_reg): /thermal-zones/cluster1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3231.31-3235.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-top/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3246.31-3250.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-bottom/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3261.32-3265.7: Warning (unit_address_vs_reg): /thermal-zones/aoss1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3276.35-3280.7: Warning (unit_address_vs_reg): /thermal-zones/q6-modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3291.30-3295.7: Warning (unit_address_vs_reg): /thermal-zones/mem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3306.31-3310.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3321.33-3325.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3336.33-3340.7: Warning (unit_address_vs_reg): /thermal-zones/camera-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3351.32-3355.7: Warning (unit_address_vs_reg): /thermal-zones/video-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3366.32-3370.7: Warning (unit_address_vs_reg): /thermal-zones/modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We get a warning about unnecessary properties of
arch/arm64/boot/dts/qcom/sdm845.dtsi:2211.22-2257.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae94000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2278.22-2324.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae96000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
So, remove these properties
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We get a warning about missing unit name for soc node, so add it.
arch/arm64/boot/dts/qcom/sdm845.dtsi:623.11-2814.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds video nodes to sdm845 based on the examples
in the bindings.
Tested-by: An\355bal Lim\363n <anibal.limon@linaro.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Malathi Gottam <mgottam@codeaurora.org>
Co-developed-by: Aniket Masule <amasule@codeaurora.org>
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Beelink GS1, OrangePi H6 boards and Pine H64 have an IR receiver.
Enable it in their device-tree.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner H6 IR is similar to A31 and can use same driver.
Add support for it.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
OrangePi Win board contains IR receiver. Enable it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
IR peripheral is completely compatible with A31 one.
Signed-off-by: Igors Makejevs <git_bb@bwzone.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Even though the binding mentions that the PHY name must be "phy", it turns
out that all our DTs had "hdmi-phy" instead.
The code doesn't care about the phy-names property, so we can just change
our DTs to match the binding, without any side effect.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The i.MX8M SAI block is not compatible with the i.MX6SX one, as the
register layout has changed due to two version registers being added
at the beginning of the address map. Remove the bogus compatible.
Fixes: 8c61538dc9 ("arm64: dts: imx8mq: Add SAI2 node")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to i.MX8MM reference manual Rev.1, 03/2019:
SAI3_RXC pin's mux option #1 should be GPT1_CLK, NOT GPT1_CAPTURE2;
SAI3_TXFS pin's mux option #1 should be GPT1_CAPTURE2, NOT GPT1_CLK.
Fixes: c1c9d41319 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the initial DT for the Asus NovaGo TP370QL laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds the initial DT for the HP Envy x2 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds the initial DT for the Lenovo Miix 630 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SID node one the H6 doesn't have a standard node name. Switch to the
one we use for the other SoCs.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DE2 bus takes two clocks, named bus and mod according to the binding.
However, the order of these clocks change from one SoC to another. Even
though it might not be an issue in most cases, having consistency will help
if we ever need to have some code to deal with deprecated bindings, and in
general it's just better.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch adds an override mode for kevin devices. The mode increases
both back porches to allow a pixel clock of 26666kHz as opposed to the
'typical' value of 252750kHz. This is needed to avoid interference with
the touch digitizer on these laptops.
Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
cycle:
Core changes:
- Device links can optionally be added between a pin control
producer and its consumers. This will affect how the system
power management is handled: a pin controller will not suspend
before all of its consumers have been suspended. This was
necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense
to make this default in the long run. Right now it is
opt-in per driver.
- Drive strength can be specified in microamps. With decreases
in silicon technology, milliamps isn't granular enough, let's
make it possible to select drive strengths in microamps. Right
now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a
product line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in
addition to muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken
aside and not usable for users. This is used in ACPI systems
to take out some GPIO lines used by the BIOS so that
noone else (neither kernel nor userspace) will play with them
by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board
management controllers for servers) in preparation for the
new Aspeed AST2600 SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Wdw1
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:
Core changes:
- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.
This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.
Right now it is opt-in per driver.
- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.
Right now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in addition to
muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes"
* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
-----BEGIN PGP SIGNATURE-----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=5hCV
-----END PGP SIGNATURE-----
Merge tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"All the bits that Boris had queued in his tree plus four patches to
add support for Intel Icelake Xeon and then fix a few corner cases"
* tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
EDAC, skx, i10nm: Fix source ID register offset
EDAC, i10nm: Check ECC enabling status per channel
EDAC, i10nm: Add Intel additional Ice-Lake support
EDAC: Make edac_debugfs_create_x*() return void
EDAC/aspeed: Remove set but not used variable 'np'
EDAC/ie31200: Reformat PCI device table
EDAC/ie31200: Add Intel Coffee Lake CPU support
EDAC/sifive: Add EDAC platform driver for SiFive SoCs
EDAC/sb_edac: Remove redundant update of tad_base
arm64: dts: stratix10: Add SDMMC EDAC node
EDAC/altera: Add Stratix10 SDMMC support
arm64: dts: stratix10: Add OCRAM EDAC node
EDAC/altera: Add Stratix10 OCRAM ECC support
EDAC/sysfs: Drop device references properly
EDAC/sysfs: Fix memory leak when creating a csrow object
One extra change wiring up the interrupt line for the external RTC chip
on the Pine H64.
-----BEGIN PGP SIGNATURE-----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=cinn
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.3-round-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT64 Changes for 5.3 - Round 2
One extra change wiring up the interrupt line for the external RTC chip
on the Pine H64.
* tag 'sunxi-dt64-for-5.3-round-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC
Link: https://lore.kernel.org/r/20190704065326.GA19010@wens.csie.org
Signed-off-by: Olof Johansson <olof@lixom.net>
both based on rk3399. Small improvements for RockPi, Sapphire and
rk3328-roc-cc boards. Improvements for the thermal handling on rk3399
as well as the rock960 board. rk3399 dwc3 clock updates and a small
start of the dtsi for the new rk3399pro (the one with the connected
npu).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl0Z0WkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcKsCACu2pd7WnNmAaRp3DruFNban/9kBcSgxoHy
x26HBCeEpyKATf/3mSvjF/FXGH3lFI9Mk1QaRxXZuJSvbNHb+/6VlRH9A3BWqzxQ
kAg548mCt5deWxmpsLrJXvb0LdEUl0VpG4am+GtapW3D1FVrZEC3R95pqZPkXyKk
TRcZ5N7pcHlXdwdtiJfK0Fw0dFyenY5zpKob/Kb1zva0OSMdLqIGpVFUrbt9lBh9
VUUbskXqmhJUTnk8s4XCi/kcIOz/quMWfcBmJ7lJnlT9Jtk+KWCjw643C4y/qvqu
Q1ohoxn+SOYC30fRjZB9m3Lyt9pxp61rbA5a+hTIFsmZYfMUi8nN
=6kC8
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards the Khadas Edge family of sbcs and the Hugsun X99 TV box,
both based on rk3399. Small improvements for RockPi, Sapphire and
rk3328-roc-cc boards. Improvements for the thermal handling on rk3399
as well as the rock960 board. rk3399 dwc3 clock updates and a small
start of the dtsi for the new rk3399pro (the one with the connected
npu).
* tag 'v5.3-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards
arm64: dts: rockchip: Enable HDMI audio on Rock Pi
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag contains only two patches for updating coresight compatible string.
-----BEGIN PGP SIGNATURE-----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=Ak7B
-----END PGP SIGNATURE-----
Merge tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux into arm/dt
Spreadtrum's devicetree for v5.3-rc1
This tag contains only two patches for updating coresight compatible string.
* tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux:
arm64: dts: sc9860: Update coresight DT bindings
arm64: dts: sc9836: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
There should be a space both before and after the equal sign.
Add a missing space for the cooling cells property.
Fixes: f48cee3239 ("arm64: dts: qcom: qcs404: Add thermal zones for each sensor")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch, the Type-C port on the Sapphire board is dead.
If setting the 'regulator-always-on' property to 'vcc5v0_typec0'
then the port works for about 4 seconds at start-up. This is a
sample trace with a memory stick plugged in:
1.- The memory stick LED lights on and kernel reports:
[ 4.782999] scsi 0:0:0:0: Direct-Access USB DISK PMAP PQ: 0 ANSI: 4
[ 5.904580] sd 0:0:0:0: [sdb] 3913344 512-byte logical blocks: (2.00 GB/1.87 GiB)
[ 5.906860] sd 0:0:0:0: [sdb] Write Protect is off
[ 5.908973] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5.909122] sd 0:0:0:0: [sdb] No Caching mode page found
[ 5.911214] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 5.951585] sdb: sdb1
[ 5.954816] sd 0:0:0:0: [sdb] Attached SCSI removable disk
2.- 4 seconds later the memory stick LED lights off and kernel reports:
[ 9.082822] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
3.- After a minute the kernel reports:
[ 71.666761] usb 5-1: USB disconnect, device number 2
It has been checked that, although the LED is off, VBUS is present.
If, instead, the dr_mode is changed to host and the phy-supply changed
accordingly, then it works. It has only been tested in host mode.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As per binding documentation [1], the DWC3 core should have the "ref",
"bus_early" and "suspend" clocks. As explained in the binding, those
clocks are required for new platforms but not for existing platforms
before commit fe8abf332b ("usb: dwc3: support clocks and resets for
DWC3 core").
However, as those clocks are really treated as required, this ends with
having some annoying messages when the "rockchip,rk3399-dwc3" is used:
[ 1.724107] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 1.731893] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[ 2.495937] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 2.647239] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
In order to remove those annoying messages, update the DWC3 hardware
module node and add all the required clocks. With this change, both, the
glue node and the DWC3 core node, have the clocks defined, but that's
not really a problem and there isn't a side effect on do this. So, we
can get rid of the annoying get clk error messages.
[1] Documentation/devicetree/bindings/usb/dwc3.txt
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the missing clock property for the watchdog on rk3328.
Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
[set wdt node to always enabled, as it is not board-specific]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Mali nodes to Exynos3 and Exynos4.
-----BEGIN PGP SIGNATURE-----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=LHkX
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.3
Add Mali nodes to Exynos5433 and Exynos7.
* tag 'samsung-dt64-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
Signed-off-by: Olof Johansson <olof@lixom.net>
- Migrate to the new binding for the Denali NAND controller
- Use reserved-memory node instead of /memreserve/ for the
secure memory area
-----BEGIN PGP SIGNATURE-----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=TggE
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt64-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.3
- Migrate to the new binding for the Denali NAND controller
- Use reserved-memory node instead of /memreserve/ for the
secure memory area
* tag 'uniphier-dt64-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add reserved-memory for secure memory
arm64: dts: uniphier: update to new Denali NAND binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC
Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:
Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT
Not tested:
- Type-C port
- OPTICAL
- IR
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the default thermal values for the rk3399-rock960 board is
inherited from the generic definition in rk3399.dtsi.
In order to ensure the rock960 has more room for througput before
being capped by the thermal framework and is correctly supported by
the IPA governor, let's define the power values and the right trip
points for better performances:
- sustainable power is tested to be 1550mW
- increase the first mitigation point to 75°C in order to get better
performances
- the first trip point is 65°C in order to let the IPA to collect
enough data for the PID regulation when it reaches 75°C
- restrict the cooling device to the big CPUs as the little CPUs
contribution to the heating effect can be considered negligible
The intelligent power allocator PID coefficient to be set in sysfs
are:
k_d: 0
k_po: 79
k_i: 10
k_pu: 50
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the common thermal zones definitions for the rk3399 assumes
multiple thermal zones are supported by the governors. This is not the
case and each thermal zone has its own governor instance acting
individually without collaboration with other governors.
As the cooling device for the CPU and the GPU thermal zones is the
same, each governors take different decisions for the same cooling
device leading to conflicting instructions and an erratic behavior.
As the cooling-maps is about to become an optional property, let's
remove the cpu cooling device map from the GPU thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds core dtsi file for Rockchip RK3399Pro SoCs,
include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to
talk to NPU part inside SoC.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the rk3328-roc-cc ethernet is enabled using "snps,force_thresh_dma_mode".
While this works, the performance leaves a lot to be desired.
A previous attempt to improve performance used "snps,txpbl = <0x4>".
This also allowed networking to function, but performance varied between boards.
This patch takes that one step further.
Set txpbl and rxpbl to 0x4.
This can also be accomplished with "snps,pbl =<0x4>" which affects both.
Also set "snps,aal" which forces address aligned DMA mode.
Fixes: 4bc4d6013b (arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues)
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is essentialy a squash of a bunch of history of cheza dt updates
from chromium kernel, some of which were themselves squashes of history
from older chromium kernels.
I don't claim any credit other than wanting to more easily boot upstream
kernel on cheza to have an easier way to test upstream driver work ;-)
I've added below in Cc tags all the original actual authors (apologies
if I missed any).
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
qcs404 has a single TSENS IP block with 10 sensors. The calibration data
is stored in an eeprom (qfprom) that is accessed through the nvmem
framework. We add the qfprom node to allow the tsens sensors to be
calibrated correctly.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The memory regions specified by /memreserve/ are passed to
early_init_dt_reserve_memory_arch() with nomap=false, so it is
not suitable for reserving memory for Trusted Firmware-A etc.
Use the more robust /reserved-memory node with the no-map property
to prevent the kernel from mapping it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With commit d8e8fd0ebf ("mtd: rawnand: denali: decouple controller
and NAND chips"), the Denali NAND controller driver migrated to the
new controller/chip representation.
Update DT for it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Add i.MX8MQ based Librem5 devkit support.
- Add SNVS power key support for i.MX8MQ and i.MX8MM.
- Add GPIO alias for imx8mq and i.MX8QXP.
- A series from Daniel Baluta to add SAI devices and enable audio
support for imx8mm-evk board.
- Add DDR performance monitor unit support for i.MX8QXP.
- Add irqsteer interrupt controller device for i.MX8MQ SoC.
- Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
- Add OCOTP device node for i.MX8QXP.
- Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
temperature sensor.
- Random minor coding style improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEcFcAAoJEFBXWFqHsHzOcNYIAICVsBiJX/gU0t+jT7i1KL83
jDe/DDNg8j9PgR0ElLPejskJgnNYLS0DTWYCY/yPgzK8bwLuqxseVyjXBhyptZ1o
Oecgp9c/79RGsJi9+tFlPKCB/jL4gvagbNn0kPAAoCv3dV5n5FikuSXfsN1v0DJi
JpBXO0IHpkqRTJKk7Ran5MzxxaHbWkjMn0u80ewsAioZv/XhPg5xVSsONleQdh2V
YtZkjcAuA7M9ZOLTKcEFmGyZW/ZTLcW7+xaj9ETJGtMJEi60igPyeFcmd1YIKfIh
g1RwqgDilwEbh2rNulyZbRkRJKQDjTeHUNRqyGEM54lxAB52VQo5hHYa56K2m9Q=
=SIR/
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes for 5.3:
- Add i.MX8MQ based Librem5 devkit support.
- Add SNVS power key support for i.MX8MQ and i.MX8MM.
- Add GPIO alias for imx8mq and i.MX8QXP.
- A series from Daniel Baluta to add SAI devices and enable audio
support for imx8mm-evk board.
- Add DDR performance monitor unit support for i.MX8QXP.
- Add irqsteer interrupt controller device for i.MX8MQ SoC.
- Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
- Add OCOTP device node for i.MX8QXP.
- Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
temperature sensor.
- Random minor coding style improvements.
* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
arm64: dts: librem5: enable the SNVS power key
arm64: dts: librem5: Limit the USB to 5V
arm64: dts: imx8qxp: added ddr performance monitor nodes
arm64: dts: imx8qxp: sort LSIO subsystem devices
arm64: dts: imx8qxp: sort alias alphabetically
arm64: dts: imx8qxp: Add lsio_mu13 node
arm64: dts: imx8mm-evk: Enable audio codec wm8524
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
arm64: dts: fsl: ls1028a: Add qDMA node
arm64: dts: imx8mm: Enable SNVS power key according to board design
arm64: dts: imx8mq-evk: Enable SNVS power key
arm64: dts: ls1028a: add crypto node
arm64: dts: ls1028a: Add temperature sensor node
arm64: dts: imx8mm: Move gic node into soc node
arm64: dts: imx8mm: Move usbphy out of soc node
arm64: dts: imx8mm: Pass the 'ranges' property
arm64: dts: imx8mm: Pass a unit name for the 'soc' node
arm64: dts: fsl: imx8mq: add the snvs power key node
arm64: dts: ls1028a: fix watchdog device node
arm64: dts: ls1028a: Enable sata.
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- This is a set of device tree changes with new clocks - adding
clock info for i.MX8 GPIO and SNVS RTC device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEY9IAAoJEFBXWFqHsHzONzkH/iQWmmauxY3ONsDhCOiq2xkz
agKfN77pgM0005NJl8bP/+wyl6JXozpq31PJrbWPvdZCwElEzBykmWZzyG2cl6Bx
ajwsldhBzMoYKvjVH0MD3ldPXoANsvfIQiAyVzPHY/tCBHI6hnaJKWCaQ0fsqg5M
vZ0lf5Adqh9MN7lBKWBz1tbOgqCNAVdhRrvLdrTuoQ/asjivqzl3oXXMWzzrc4lK
pUGPg1+iqf/MSBVoX8F3ETO9W+GjdjHE0qoGttXf90w2epQZqO5Ta2mfhzyF4fkE
pcPGKQTASi+zOcUuzgM97TGfWbeOYhd0kRmInZVZt+Wce2Ju4MO5M0Iyxp6xvJI=
=GaZH
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT changes with new clock for 5.3:
- This is a set of device tree changes with new clocks - adding
clock info for i.MX8 GPIO and SNVS RTC device.
* tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: add clock for SNVS RTC node
arm64: dts: imx8mm: add clock for SNVS RTC node
arm64: dts: imx8mm: add clock for GPIO node
clk: imx8m: Add GIC clock
dt-bindings: clock: imx8m: Add GIC clock
clk: imx8mm: add SNVS clock to clock tree
dt-bindings: clock: imx8mm: Add SNVS clock
clk: imx8mq: add SNVS clock to clock tree
dt-bindings: clock: imx8mq: Add SNVS clock
clk: imx8mm: add GPIO clocks to clock tree
dt-bindings: clock: imx8mm: Add GPIO clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.
Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.
-----BEGIN PGP SIGNATURE-----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=Ea0t
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.3-rc1
This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.
Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.
* tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits)
arm64: tegra: Enable PCIe slots in P2972-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
arm64: tegra: Add PEX DPD states as pinctrl properties
arm64: tegra: Enable ACONNECT, ADMA and AGIC
arm64: tegra: Add ACONNECT, ADMA and AGIC nodes
arm64: tegra: Sort device tree nodes alphabetically
arm64: tegra: Fix Jetson Nano GPU regulator
arm64: tegra: Update Jetson TX1 GPU regulator timings
arm64: tegra: Fix AGIC register range
arm64: tegra: Add INA3221 channel info for Jetson TX2
arm64: tegra: Enable PWM on Jetson Nano
arm64: tegra: Enable CPU sleep on Jetson Nano
arm64: tegra: Add ID EEPROMs on Jetson Nano
arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit
arm64: tegra: Add ID EEPROM for Jetson TX2 module
arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit
arm64: tegra: Add ID EEPROM for Jetson TX1 module
arm64: tegra: Don't use architected timer for suspend on Tegra210
arm64: tegra: Mark architected timer as always on
arm64: tegra: Add pin control states for I2C on Tegra186
...
Signed-off-by: Olof Johansson <olof@lixom.net>
For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQy4uwAKCRALBhiOFHI7
1dW6AJ9EYqnK7TQxYcxXl/gy8E5zaTH8igCeKGKpjV0P2sUv66nC3pmdipvMP68=
=KCf7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.3 (part 1)
For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
* tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add missing #interrupt-cells property
arm64: dts: marvell: armada-7040-db: Add USB current regulators
arm64: dts: armada-3720-espressobin: correct spi node
arm64: dts: marvell: Disable AP I2C on Armada-8040-DB
arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq
arm64: dts: marvell: Change core numbering in AP806 thermal-node
arm64: dts: marvell: clearfog-gt-8k: set SFP power limit
arm64: dts: marvell: mcbin: enlarge PCI memory window
Signed-off-by: Olof Johansson <olof@lixom.net>
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
-----BEGIN PGP SIGNATURE-----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=Qsip
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM64 Based SoC DT Updates for v5.3
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
arm64: dts: renesas: hihope-common: Remove "label" from LEDs
arm64: dts: renesas: hihope-common: Add HDMI support
arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
arm64: dts: renesas: hihope-common: Add LEDs support
arm64: dts: renesas: hihope-common: Enable USB3.0
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: r8a774a1: Add TMU device nodes
arm64: dts: renesas: r8a774a1: Add CMT device nodes
arm64: dts: renesas: hihope-common: Add uSD and eMMC
arm64: dts: renesas: r8a77990: Fix register range of display node
arm64: dts: renesas: cat874: Enable usb role switch support
arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
arm64: dts: renesas: hihope-common: Add RWDT support
arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
arm and arm64, a fix for the array syntax raised by our DT schemas.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
=4UQl
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQcQAKCRDj7w1vZxhR
xbybAP9uAJcwix86BmYLIA3I7n1fT1oLooS+WfPL4btmqYBykAD/fK7Nn1g3alWg
7c61AEJKDHZwObU1dNpxjvsjT+/u+Qc=
=B/U5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of arm64 DT changes, this time with:
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add DMA node
arm64: dts: allwinner: a64: Add lradc node
dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
arm64: dts: allwinner: h6: add r_watchog node
arm64: dts: allwinner: h6: add watchdog node
dt-bindings: watchdog: add Allwinner H6 watchdog
arm64: dts: allwinner: a64: Enable audio on Teres-I
arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
arm64: dts: allwinner: axp803: add USB power supply node
arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GTKf
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for v5.3
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3660: Add CoreSight support
arm64: dts: hi6220: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Add nodes for GPU (Mali T760) to Exynos7. Current support for Exynos7
misses a lot, including proper clocks, power domains, frequency and
voltage scaling and cooling. However this still can provide basic GPU
description. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add nodes for GPU (Mali T760) to Exynos5433. Missing element is the
cooling device. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The external PCF8563 RTC chip's interrupt line is connected to the NMI
line on the SoC.
Add the interrupt line to the device tree.
Fixes: 17ebc33afc ("arm64: allwinner: h6: add PCF8563 RTC on Pine H64 board")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The charge controller can handle 14V but the PTC on the devkit can only
handle 6V so limit the negotiated voltage to 5V.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We prefer to sort device nodes under simple bus in order of unit
address. Let's sort the devices under lsio_subsys properly.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MM has one wm8524 audio codec connected with
SAI3 digital audio interface.
This patch uses simple-card machine driver in order
to enable wm8524 codec.
We need to set:
* SAI3 pinctrl configuration
* codec reset gpio pinctrl configuration
* clock hierarchy
* codec node
* simple-card configuration
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
support for reading chip ID and efuse
Signed-off-by: Michael Mei <michael.mei@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The commit adds pinctrl device node for mt8183
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Pinned the frequency to the max and run dhrystone to get the value.
little cpu: 11071 (max freq: 1989000)
big cpu: 15293 (max freq: 1989000)
11071 : 15293 ~= 741 : 1024
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add P2U (PIPE to UPHY) and PCIe controller nodes to device tree.
The Tegra194 SoC contains six PCIe controllers and twenty P2U instances
grouped into two different PHY bricks namely High-Speed IO (HSIO-12 P2Us)
and NVIDIA High Speed (NVHS-8 P2Us) respectively.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add PEX deep power down states as pinctrl properties to set in PCIe driver.
In Tegra210, BIAS pads are not in power down mode when clamps are applied.
To set the pads in DPD, pass the PEX DPD states as pinctrl properties to
PCIe driver.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Bjorn Andersson