* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits)
sh_mobile_meram: Safely disable MERAM operation when not initialized
video: mb862xxfb: add support for L1 displaying
video: mb862xx: add support for controller's I2C bus adapter
video: mb862xxfb: relocate register space to get contiguous vram
video: mb862xxfb: use pre-initialized configuration for PCI GDCs
video: mb862xxfb: correct fix.smem_len field initialization
video: s3c-fb: correct transparency checking in 32bpp
video: s3c-fb: add gpio setup function to resume function
fbdev/amifb: Remove superfluous alignment of frame buffer memory
fbdev/amifb: Do not call panic() if there's not enough Chip RAM
fbdev/amifb: Correct check for video memory size
video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME
video: s3c-fb: add window variant information for S5P
video: s3c-fb: add additional validate bpps
video: s3c-fb: correct window osd size offset values
udlfb: include prefetch.h explicitly
drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region
drivers/video/sm501fb.c: Convert release_resource to release_mem_region
drivers/video: Convert release_resource to release_mem_region
video, udlfb: Fix two build warnings about 'ignoring return value'
...
It should check if strict_strtoul() succeeds.
[akpm@linux-foundation.org: don't override strict_strtoul() return value]
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the MERAM platform data is defined, but the MERAM has not been
properly initaliazed we need to safely fall back to non-MERAM operation.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Allow displaying L1 video data on top of the primary L0 layer.
The L1 layer position and dimensions can be configured and the
layer enabled/disabled by using the appropriate L1 controls
added by this patch.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Add adapter driver for I2C adapter in Coral-P(A)/Lime GDCs.
So we can easily access devices on controller's I2C bus using
i2c-dev interface.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
By default the GDC registers are located in the middle of the 64MiB
area for video RAM and registers. When 32MiB VRAM or more is used,
relocate the register space to the top of the 64MiB space so that
we get the contiguous VRAM for GDC frame buffer layers, drawing
frames, capture and cursor buffers.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
If the bootloader has already initialized the display
controller, do not re-initialize it in the driver. Take over
the bootloader's configuration instead. This is already supported
for non PCI GDCs Lime and Mint. Add this functionality for PCI
GDCs Coral-P and Coral-PA. It is useful to avoid flicker and
also avoids unneeded init delays while booting.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Initialize smem_len field to the actual frame buffer size and
not to the whole video RAM size. This prevents overwriting
other video memory (which could be used by other layers, cursors
or accelerated drivers) by frame buffer applications relying on
fix.smem_len.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
32bpp means ARGB 8888 in the driver, therfore the transparency length
and offset should be 8 and 24 respectively. However, the transparency
length and offset were previously 0, which means that the driver supports
RGB 888 without alpha blending when 32bpp is used.
So, the transparency checking in 32bpp is corrected so that the
transparency length and offset are 8 and 24 respectively.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds gpio setup function to resume function to ensure
gpio used by FIMD IP and LCD panel during a resume.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
amiga_chip_alloc() already aligns to the PAGE_SIZE
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The check should compare the available memory size with the highest allocation
value (VIDEOMEMSIZE_*_2M), not with the lowest value (VIDEOMEMSIZE_*_1M).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The driver can be built as either a PCI or platform (OF) driver. It
might make sense to built it as both (though that is not currently
possible) but it certainly doesn't make sense to build it as neither!
Add dependencies and add a choice group to ensure that exactly one of
FB_MB862XX_PCI_GDC and FB_MB862XX_LIME is selected.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Compared to s3c64xx, S5P series such as S5PC100 and S5PV210 have
the different window features including valid bpp, palette size
and palette bpp. Therefore, window variant information for S5P
should be added.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Additional validate bpps are added to windows as follows:
window0: 18 bpp for RGB666
window1, 2 and 3: 28 bpp for ARGB4888
window4: 19 bpp for ARGB1666, 28 bpp for ARGB4888
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Offset values for OSD size registers of window 1 and 2 are corrected.
The offset values of OSD size registers are as follows:
window0: VIDOSDC (0x8)
window1 and 2: VIDOSDD (0xc)
window3 and 4: not present
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Commit e66eed651f ("list: remove prefetching from
regular list iterators") removed the include of prefetch.h from list.h,
so we need to include it explicitly, now.
fixes this build error on powerpc:
drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
build warning:
...
drivers/video/udlfb.c:1590: warning: ignoring return value of ‘device_create_file’, declared with attribute warn_unused_result
drivers/video/udlfb.c:1592: warning: ignoring return value of ‘device_create_bin_file’, declared with attribute warn_unused_result
...
So add two checks to get rid of 'em.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copy and paste from the Xorg DDX. Tested on TwisterK (Compaq Presario 700).
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The notifier function calls sh_mobile_lcdc_stop() and
sh_mobile_lcdc_start(), which already take care about the runtime PM
state. Remove redundant calls.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The "ret" variable in sh_mobile_lcdc_start() is only used at one
location, move its definition to the inner-most scope.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers/video/efifb.c:247: warning: cast to pointer from integer of different size
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
ARM: bcmring: convert to use sp804 clockevents
ARM: bcmring: convert to sp804 clocksource
ARM: 6912/1: bcmring: Add clkdev table in init_early
clockevents: ARM sp804: obtain sp804 timer rate via clks
clockevents: ARM sp804: allow clockevent name to be specified
clocksource: ARM sp804: obtain sp804 timer rate via clks
clocksource: ARM sp804: allow clocksource name to be specified
clocksource: convert OMAP1 to 32-bit down counting clocksource
clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
clocksource: convert SPEAr platforms 16-bit up counting clocksource
clocksource: convert Integrator/AP 16-bit down counting clocksource
clocksource: convert W90x900 24-bit down counting clocksource
clocksource: convert ARM 32-bit down counting clocksources
clocksource: convert ARM 32-bit up counting clocksources
clocksource: add common mmio clocksource
ARM: update sa1100 to reflect PXA updates
ARM: omap1: convert to using readl/writel instead of volatile struct
ARM: omap1: delete useless interrupt handler
ARM: s5p: consolidate selection of timer register
ARM: 6939/1: fix missing 'cpu_relax()' declaration
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
Since the NV24 framebuffer has a CbCr plane that is twice as wide
as the Y plane, it needs to be handled as a special case.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Based on the patch by Takanari Hayama <taki@igel.co.jp>
Adds support framework necessary to use Media RAM (MERAM)
caching functionality with the LCDC. The MERAM is accessed
through up to 4 Interconnect Buffers (ICBs).
ICB numbers and MERAM address ranges to use are specified in
by filling in the .meram_cfg member of the LCDC platform data
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add the support for NV12 color format.
Configure base address for UV component of NV12 color format.
Change the way chroma scaling is handled for YUV formats on OMAP4 by enabling
chroma-resampling for video pipeline and hence using FIR2 register set for
scaling UV.
Changes to _dispc_set_scaling(), because of the reason above, are:
- call _dispc_set_scaling_common() to handle scaling for all color formats
except for OMAP4 where it only handles scaling for RGB or Y-component
- call _dispc_set_scaling_uv() for special handling required for UV
component on OMAP4.
- dispc_set_scaling_uv() also resets chroma-resampling bit for RGB color modes.
Contains chroma scaling (_dispc_set_scaling_uv) design and implemented by
Lajos Molnar <molnar@ti.com>
Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add new registers specific to UV color component that are introduced in OMAP4.
Add simple helper functions to configure the newly added registers.
These new registers are mainly:
- UV base address registers used specifically for NV12 color-format
- FIR registers used for UV-color-component scaling on OMAP4
- Accumulator registers used for UV-color-component scaling
Add these new registers to save/restore and DUMPREG functions.
Also add two new features for OMAP4:
- FEAT_HANDLE_UV_SEPARATE - this is used on OMAP4 as UV color-component requires
separate handling.
- FEAT_ATTR2 - this is used on OMAP4 to configure new ATTRIBUTES2 register.
Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use for loop instead of individual entries for OVL_FIR_COEF_H, OVL_FIR_COEF_HV,
OVL_FIR_COEF_V and OVL_CONV_COEF in SR() and RR().
Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
FIR values can never be zero as per TRM, and the current code writes zero
when scaling is not used. It was not causing any problem as scaling was
disabled when zero was written. Its still safer to not write zero to
it in any case.
Now we configure correct FIR values even when scaling is not used (i.e. set FIR
to 1024 when scaling is not used), but the scaling enable bits are still kept
off if the scaling is not needed.
Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add new color formats supported by OMAP4: NV12, RGBA16, RGBX16,
ARGB16_1555, XRGB16_1555.
NV12 color format is defined here, its support in DSS will be added separately.
Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* 'viafb-next' of git://github.com/schandinat/linux-2.6: (24 commits)
viafb: Automatic OLPC XO-1.5 configuration
viafb: remove unused CEA mode
viafb: try to map less memory in case of failure
viafb: use write combining for video ram
viafb: add X server compatibility mode
viafb: reduce OLPC refresh a bit
viafb: fix OLPC XO 1.5 device connection
viafb: fix OLPC DCON refresh rate
viafb: delete clock and PLL initialization
viafb: replace custom return values
viafb: some small cleanup for global variables
viafb: gather common good, old VGA initialization in one place
viafb: add engine clock support
viafb: add VIA slapping capability
viafb: split clock and PLL code to an extra file
viafb: add primary/secondary clock on/off switches
viafb: add clock source selection and PLL power management support
viafb: prepare for PLL separation
viafb: call viafb_get_clk_value only in viafb_set_vclock
viafb: remove unused max_hres/vres
...
Commit e66eed651f ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.
So this fixes things up a bit, using
grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')
to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.
There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when
trying to add an entry for the interrupt handler to sysfs.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Implement an ASoC Codec Driver to handle audio configuration. The
implementation offers an interface for audio configuration and
control to be exposed to ALSA while hidding the HDMI details.
The ASoC driver supports the Basic Audio configuration as described
in CEA-861-D: 2-channel linear PCM with 32, 44.1 and 48kHz sample
rates and 16 bits/sample. It additionally supports 24 bit/sample
in 32-bit words.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add functionality for relevant audio configuration. Functions to
configure the audio FIFO and DMA as well as functions for the audio
core and Audio Info frame are included. This functionality is to
be used by the ASoC HDMI audio codec.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add enurations and structures for audio configuration. This includes
enumerations for the Audio InfoFrame, I2S, audio FIFO and audio core.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Linus Torvalds