In preparation of using user_access_begin/end in restore_user_regs(),
move the access_ok() inside the function.
It makes no difference as the behaviour on a failed access_ok() is
the same as on failed restore_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c106eb2f37c3040f1fd38b40e50c670feb7cb835.1616151715.git.christophe.leroy@csgroup.eu
In the same spirit as commit f1cf4f93de ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
Similarly to commit 5cf773fc8f37 ("powerpc/uaccess: Also perform
64 bits copies in unsafe_copy_to_user() on ppc32")
ppc32 has an efficiant 64 bits unsafe_get_user(), so also use it in
order to unroll loops more.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/308e65d9237a14e8c0e3b22919fcf0b5e5592608.1616151715.git.christophe.leroy@csgroup.eu
In the same way as commit 14026b94cc ("signal: Add
unsafe_put_compat_sigset()"), this time add
unsafe_get_compat_sigset() macro which is the 'unsafe'
version of get_compat_sigset()
For the bigendian, use unsafe_get_user() directly
to avoid intermediate copy through the stack.
For the littleendian, use a straight unsafe_copy_from_user().
This commit adds the generic fallback for unsafe_copy_from_user().
Architectures wanting to use unsafe_get_compat_sigset() have to
make sure they have their own unsafe_copy_from_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b05bf434ee13c76bc9df5f02653a10db5e7b54e5.1616151715.git.christophe.leroy@csgroup.eu
clang 11 and future GCC are supporting asm goto with outputs.
Use it to implement get_user in order to get better generated code.
Note that clang requires to set x in the default branch of
__get_user_size_goto() otherwise is compliant about x not being
initialised :puzzled:
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/403745b5aaa1b315bb4e8e46c1ba949e77eecec0.1615398265.git.christophe.leroy@csgroup.eu
Make get_user() do the access_ok() check then call __get_user().
Make put_user() do the access_ok() check then call __put_user().
Then embed __get_user_size() and __put_user_size() in
__get_user() and __put_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eebc554f6a81f570c46ea3551000ff5b886e4faa.1615398265.git.christophe.leroy@csgroup.eu
__get_user_bad() and __put_user_bad() are functions that are
declared but not defined, in order to make the link fail in
case they are called.
Nowadays, we have BUILD_BUG() and BUILD_BUG_ON() for that, and
they have the advantage to break the build earlier as it breaks
it at compile time instead of link time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7d839e994f49fae4ff7b70fac72bd951272436b.1615398265.git.christophe.leroy@csgroup.eu
Commit d02f6b7dab ("powerpc/uaccess: Evaluate macro arguments once,
before user access is allowed") changed the __chk_user_ptr()
argument from the passed ptr pointer to the locally
declared __gu_addr. But __gu_addr is locally defined as __user
so the check is pointless.
During kernel build __chk_user_ptr() voids and is only evaluated
during sparse checks so it should have been armless to leave the
original pointer check there.
Nevertheless, this check is indeed redundant with the assignment
above which casts the ptr pointer to the local __user __gu_addr.
In case of mismatch, sparse will detect it there, so the
__check_user_ptr() is not needed anywhere else than in access_ok().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f17d75046733b891ab2e668dbf464787cdf598.1615398265.git.christophe.leroy@csgroup.eu
__unsafe_put_user_goto() is just an intermediate layer to
__put_user_size_goto() without added value other than doing
the __user pointer type checking.
Do the __user pointer type checking in __put_user_size_goto()
and remove __unsafe_put_user_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6552149209aebd887a6977272b06a41256bdb9f.1615398265.git.christophe.leroy@csgroup.eu
Commit 6bfd93c32a ("powerpc: Fix incorrect might_sleep in
__get_user/__put_user on kernel addresses") added a check to not call
might_sleep() on kernel addresses. This was to enable the use of
__get_user() in the alignment exception handler for any address.
Then commit 95156f0051 ("lockdep, mm: fix might_fault() annotation")
added a check of the address space in might_fault(), based on
set_fs() logic. But this didn't solve the powerpc alignment exception
case as it didn't call set_fs(KERNEL_DS).
Nowadays, set_fs() is gone, previous patch fixed the alignment
exception handler and __get_user/__put_user are not supposed to be
used anymore to read kernel memory.
Therefore the is_kernel_addr() check has become useless and can be
removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0a980a4dc7a2551183dd5cb30f46eafdbee390c.1615398265.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit e68c825bb0 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu
This reverts commit 675bceb097 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")
All the related issues are fixed as of commit:
f14312e1ed ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")
Hence re-enable it.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
Drop the 'beginning of kernel-doc' notation markers (/**)
in places that are not in kernel-doc format.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210325200820.16594-1-rdunlap@infradead.org
call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.
Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.
This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au
Sparse warns:
warning: symbol 'rfi_flush' was not declared.
warning: symbol 'entry_flush' was not declared.
warning: symbol 'uaccess_flush' was not declared.
Define 'entry_flush' and 'uaccess_flush' as static because they are
not referenced outside the file. Include asm/security_features.h in
which 'rfi_flush' is declared.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316041148.29694-1-heying24@huawei.com
arch/powerpc/kernel/iommu.c:76:2-16: WARNING: NULL check before some freeing functions is not needed.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: 691602aab9 ("powerpc/iommu/debug: Add debugfs entries for IOMMU tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318234441.GA63469@f8e20a472e81
With below two commits:
commit c91435d95c ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit b2ff33a10c ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
Hash faults use the trap vector to decide whether this is an
instruction or data fault. This should use the TRAP accessor
rather than open access regs->trap.
This won't cause a problem at the moment because 64s only uses
trap flags for system call interrupts (the norestart flag), but
that could change if any other trap flags get used in future.
Fixes: a4922f5442 ("powerpc/64s: move the hash fault handling logic to C")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316105205.407767-1-npiggin@gmail.com
In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all
functions are always defined, and arch_vma_access_permitted()
always returns true when CONFIG_PPC_MEM_KEYS is not defined so
access_pkey_error() will return false so bad_access_pkey()
will never be called.
Include linux/pkeys.h to get a definition of vma_pkeys() for
bad_access_pkey().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8038392f38d81f2ad169347efac29146f553b238.1615819955.git.christophe.leroy@csgroup.eu
Section mismatch in reference from the function .fsl_add_bridge() to
the function .init.text:.setup_pci_cmd()
fsl_add_bridge() is not __init, and can't be, and is the only caller
of setup_pci_cmd(). Fix it by making setup_pci_cmd() non-init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093341.132986-1-mpe@ellerman.id.au
Section mismatch in reference from the function .smp_setup_pacas() to
the function .init.text:.allocate_paca()
The only caller of smp_setup_pacas() is setup_arch() which is __init,
so mark smp_setup_pacas() __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093333.132657-1-mpe@ellerman.id.au
Christophe Leroy