So far smp_sufficient_security() has returned false if we're encrypted
with an STK but do have an LTK available. However, for the sake of LE
CoC servers we do want to let the incoming connection through even
though we're only encrypted with the STK.
This patch adds a key preference parameter to smp_sufficient_security()
with two possible values (enum used instead of bool for readability).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For LE CoC L2CAP servers we don't do security level elevation during the
BT_CONNECT2 state (instead LE CoC simply sends an immediate error
response if the security level isn't high enough). Therefore if we get a
security level change while an LE CoC channel is in the BT_CONNECT2
state we should simply do nothing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no reason why all users of L2CAP would need to worry about
initializing chan->nesting to L2CAP_NESTING_NORMAL (which is important
since 0 is the same as NESTING_SMP). This patch moves the initialization
to the common place that's used to create all new channels, i.e. the
l2cap_chan_create() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In the error case where credits is greater than max_credits there
is a missing l2cap_chan_unlock before returning.
Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The values of a lot of the mgmt_device_connected() parameters come
straight from a hci_conn object. We can simplify the function by passing
the full hci_conn pointer to it.
Signed-off-by: Alfonso Acosta <fons@spotify.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The L2CAP connection's channel list lock (conn->chan_lock) must never be
taken while already holding a channel lock (chan->lock) in order to
avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect
function has acquired the chan->lock early in the function and then
later called l2cap_chan_add(conn, chan) which will try to take the
conn->chan_lock. This violates the correct order of taking the locks and
may lead to the following type of lockdep warnings:
-> #1 (&conn->chan_lock){+.+...}:
[<c109324d>] lock_acquire+0x9d/0x140
[<c188459c>] mutex_lock_nested+0x6c/0x420
[<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth]
[<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth]
[<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan]
-> #0 (&chan->lock){+.+.+.}:
[<c10928d8>] __lock_acquire+0x1a18/0x1d20
[<c109324d>] lock_acquire+0x9d/0x140
[<c188459c>] mutex_lock_nested+0x6c/0x420
[<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth]
[<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth]
[<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth]
[<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth]
CPU0 CPU1
---- ----
lock(&conn->chan_lock);
lock(&chan->lock);
lock(&conn->chan_lock);
lock(&chan->lock);
Before calling l2cap_chan_add() the channel is not part of the
conn->chan_l list, and can therefore only be accessed by the L2CAP user
(such as l2cap_sock.c). We can therefore assume that it is the
responsibility of the user to handle mutual exclusion until this point
(which we can see is already true in l2cap_sock.c by it in many places
touching chan members without holding chan->lock).
Since the hci_conn and by exctension l2cap_conn creation in the
l2cap_chan_connect() function depend on chan details we cannot simply
add a mutex_lock(&conn->chan_lock) in the beginning of the function
(since the conn object doesn't yet exist there). What we can do however
is move the chan->lock taking later into the function where we already
have the conn object and can that way take conn->chan_lock first.
This patch implements the above strategy and does some other necessary
changes such as using __l2cap_chan_add() which assumes conn->chan_lock
is held, as well as adding a second needed label so the unlocking
happens as it should.
Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Even if we have no connection-oriented channels we should perform the
L2CAP Information Request procedures before notifying L2CAP channels of
the connection. This is so that the L2CAP channel implementations can
perform checks on what the remote side supports (e.g. does it support
the fixed channel in question).
So far the code has relied on the l2cap_do_start() function to initiate
the Information Request, however l2cap_do_start() is used on a
per-channel basis and only for connection-oriented channels. This means
that if there are no connection-oriented channels on the system we would
never start the Information Request procedure.
This patch creates a new l2cap_request_info() helper function to
initiate the Information Request procedure, and ensures that it is
called whenever a BR/EDR connection has been established. The patch also
updates fixed channels to be notified of connection readiness only once
the Information Request procedure has completed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The identity address update of all channels for an l2cap_conn needs to
take the lock for each channel, i.e. it's safest to do this by a
separate workqueue callback.
Previously this was partially solved by moving the entire SMP key
distribution behind a workqueue. However, if we want SMP context locking
to be correct and safe we should always use the l2cap_chan lock when
accessing it, meaning even smp_distribute_keys needs to take that lock
which would once again create a dead lock when updating the identity
address.
The simplest way to solve this is to have l2cap_conn manage the deferred
work which is what this patch does. A subsequent patch will remove the
now unnecessary SMP key distribution work struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The "pending" L2CAP response value is not defined for LE CoC. This patch
adds a clarifying comment to the code so that the reader will not think
there is a bug in trying to use this value for LE CoC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that there are no more users of the l2cap_conn_shutdown API (since
smp.c switched to using hci_disconnect) we can simply remove it along
with all of it's l2cap_conn variables.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the l2cap_conn_del() function is used we do not want to wait around
"in case something happens" before disconnecting. This patch sets the
disconnection timeout to 0 so that the disconnection routines get
immediately scheduled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It's natural to have *_get() functions that increment the reference
count of an object to return the object type itself. This way it's
simple to make a copy of the object pointer and increase the reference
count in a single step. This patch updates two such get() functions,
namely hci_conn_get() and l2cap_conn_get(), and updates the users to
take advantage of the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that SMP has been converted to use fixed channels we've got a bit of
a problem with the hci_conn reference counting. So far the L2CAP code
has kept a reference for each L2CAP channel that was notified of the
connection. With SMP however this would mean that the connection is
never dropped even though there are no other users of it. Furthermore,
SMP already does its own hci_conn reference counting internally,
starting from a security or pairing request and ending with the key
distribution.
This patch makes L2CAP fixed channels default to the L2CAP core not
keeping a hci_conn reference for them. A new FLAG_HOLD_HCI_CONN flag is
added so that L2CAP users can declare an exception to this rule and hold
a reference even for their fixed channels. One such exception is the
L2CAP socket layer which does want a reference for each socket (e.g. an
ATT socket which uses a fixed channel).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The l2cap_chan_add() function doesn't require the channel to be
unlocked. It only requires the l2cap_conn to be unlocked. Therefore,
it's unnecessary to unlock a channel before calling l2cap_chan_add().
This patch removes such unnecessary unlocking from the
l2cap_chan_connect() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The l2cap_create_le_flowctl_pdu() function that l2cap_segment_le_sdu()
calls is perfectly capable of doing packet fragmentation if given bigger
PDUs than the HCI buffers allow. Forcing the PDU length based on the HCI
MTU (conn->mtu) would therefore needlessly strict operation on hardware
with limited LE buffers (e.g. both Intel and Broadcom seem to have this
set to just 27 bytes).
This patch removes the restriction and makes it possible to send PDUs of
the full length that the remote MPS value allows.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
I-Frame which is going to be resend already has FCS field added and set
(if it was required). Adding additional FCS field calculated from data +
old FCS in resend function is incorrect. This patch fix that.
Issue has been found during PTS testing.
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is no need to decrease pdu size with L2CAP SDU lenght in Start
L2CAP SDU frame. Start packtet is just 2 bytes longer as specified and
we can keep payload as long as possible.
When testing SAR L2CAP against PTS, L2CAP channel is usually configured
in that way, that SDU = MPS * 3. PTS expets then 3 I-Frames from IUT: Start,
Continuation and End frame.
Without this fix, we sent 4 I-Frames. We could pass a test by using -b
option in l2test and send just two bytes less than SDU length. With this
patch no need to use -b option.
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that there are no-longer any users for l2cap_conn->security_timer we
can go ahead and simply remove it. The patch makes initialization of the
conn->info_timer unconditional since it's better not to leave any
l2cap_conn data structures uninitialized no matter what the underlying
transport.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since we no-longer do special handling of SMP within l2cap_core.c we
don't have any code for calling l2cap_conn_del() when smp.c doesn't like
the data it gets. At the same time we cannot simply export
l2cap_conn_del() since it will try to lock the channels it calls into
whereas we already hold the lock in the smp.c l2cap_chan callbacks (i.e.
it'd lead to a deadlock).
This patch adds a new l2cap_conn_shutdown() API which is very similar to
l2cap_conn_del() except that it defers the call to l2cap_conn_del()
through a workqueue, thereby making it safe to use it from an L2CAP
channel callback.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no need to export the smp_distribute_keys() function since the
resume callback is called in the same scenario. This patch makes the
smp_notify_keys function private (at the same time moving it higher up
in smp.c to avoid forward declarations) and adds a resume callback for
SMP to call it from there instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that we have all the necessary pieces in place we can fully convert
SMP to use the L2CAP channel infrastructure. This patch adds the
necessary callbacks and removes the now unneeded conn->smp_chan pointer.
One notable behavioral change in this patch comes from the following
code snippet:
- case L2CAP_CID_SMP:
- if (smp_sig_channel(conn, skb))
- l2cap_conn_del(conn->hcon, EACCES);
This piece of code was essentially forcing a disconnection if garbage
SMP data was received. The l2cap_conn_del() function is private to
l2cap_conn.c so we don't have access to it anymore when using the L2CAP
channel callbacks. Therefore, the behavior of the new code is simply to
return errors in the recv() callback (which is simply the old
smp_sig_channel()), but no disconnection will occur.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For most cases it makes no difference whether l2cap_le_conn_ready() is
called before or after calling the channel ready() callbacks, however
for upcoming SMP code we need this as the ready() callback initializes
certain structures that a call to smp_conn_security() from
l2cap_le_conn_ready() depends on. Therefore, move the call to
l2cap_le_conn_ready() after iterating through and notifying channels.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
L2CAP channel implementations may want to still access the chan->conn
pointer. This will particularly be the case for SMP that will want to
clear a reference to the SMP channel in the l2cap_conn structure. The
only user of the teardown callback so far is l2cap_sock.c and for the
code there it makes no difference whether the callback is called before
or after clearing the chan->conn pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The l2cap_add_scid function is used for registering a fixed L2CAP
channel. Instead of having separate initialization of the channel type
and outgoing MTU in l2cap_sock.c it's more intuitive to do these things
in the l2cap_add_scid function itself (and thereby make the
functionality available to other users besides l2cap_sock.c).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that we've got the fixed channel infrastructure cleaned up in a
generic way there's no longer a need to have a dedicated function for
handling data on the ATT channel. Instead the generic
l2cap_data_channel() handler will be able to do the exact same thing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When notifying global fixed channels of new connections it doesn't make
sense to consider channels meant for a different link type than the one
available. This patch adds an extra parameter to the
l2cap_global_fixed_chan() lookup function and ensures that only channels
matching the current hci_conn type are looked up.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In order to remove special handling of fixed L2CAP channels we need to
start creating them in a single place instead of having per-channel
exceptions. The most natural place is the l2cap_conn_cfm() function
which is called whenever there is a new baseband link.
The only really special case so far has been the ATT socket, so in order
not to break the code in between this patch removes the ATT special
handling at the same time as it adds the generic fixed channel handling
from l2cap_le_conn_ready() into the hci_conn_cfm() function. As a
related change the channel locking in l2cap_conn_ready() becomes simpler
and we can thereby move the smp_conn_security() call into the
l2cap_le_conn_ready() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch is a simple refactoring of l2cap_connect_cfm to allow easier
extension of the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
With the update to sk->resume() and __l2cap_no_conn_pending() we
no-longer need to have special handling of ATT channels in the
l2cap_security_cfm() function. The chan->sec_level update when
encryption has been enabled is safe to do for any kind of channel, and
the loop takes later care of calling chan->ready() or chan->resume() if
necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The __l2cap_no_conn_pending() function would previously only return a
meaningful value for connection oriented channels and was therefore not
useful for anything else. As preparation of making the L2CAP code more
generic allow the function to be called for other channel types as well
by returning a meaningful value for them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When looking up entries from the global L2CAP channel list there needs
to be a guarantee that other code doesn't go and remove the entry after
a channel has been returned by the lookup function. This patch makes
sure that the channel reference is incremented before the read lock is
released in the global channel lookup functions. The patch also adds the
corresponding l2cap_chan_put() calls once the channels pointers are
no-longer needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It's safer practice to use sizeof(*ptr) instead of sizeof(ptr_type) when
allocating memory in case the type changes. This also fixes the
following style of warnings from static analyzers:
CHECK: Prefer kzalloc(sizeof(*ie)...) over kzalloc(sizeof(struct inquiry_entry)...)
+ ie = kzalloc(sizeof(struct inquiry_entry), GFP_KERNEL);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The EOPNOTSUPP and ENOTSUPP errors are very similar in meaning, but
ENOTSUPP is a fairly new addition to POSIX. Not all libc versions know
about the value the kernel uses for ENOTSUPP so it's better to use
EOPNOTSUPP to ensure understandable error messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We're interested in whether an authentication request is because of a
remote or local action. So far hci_conn_security() has been used both
for incoming and outgoing actions (e.g. RFCOMM or L2CAP connect
requests) so without some modifications it cannot know which peer is
responsible for requesting authentication.
This patch adds a new "bool initiator" parameter to hci_conn_security()
to indicate which side is responsible for the request and updates the
current users to pass this information correspondingly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To make the code more understandable it makes sense to use the new HCI
defines for connection role instead of a "bool master" parameter. This
makes it immediately clear when looking at the function calls what the
last parameter is describing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Having a dedicated u8 role variable in the hci_conn struct greatly
simplifies tracking of the role, since this is the native way that it's
represented on the HCI level.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The spinlock protecting the L2CAP ident number can be converted into
a mutex since the whole processing is run in a workqueue. So instead
of using a spinlock, just use a mutex here.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The list of L2CAP fixed channels increased with newer versions of the
specification. This just updates the constants for it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When ERTM support is disabled, then do not even send ERTM configuration
option even if the remote side supports it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We already have several lists with struct bdaddr_list entries, and there
will be more in the future. Since the operations for adding, removing,
looking up and clearing entries in these lists are exactly the same it
doesn't make sense to define new functions for every single list. This
patch unifies the functions by passing the list_head to them instead of
a hci_dev pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If we have both LE scanning and advertising simultaneously enabled we
need a way to tell hci_connect_le() in which role to initiate a
connection. This patch adds a new parameter to the function to give it
the necessary information. For auto-connect and mgmt_pair_device we
always use master role, whereas for L2CAP users (in practice sockets) we
use slave role whenever HCI_ADVERTISING is set and master role
otherwise.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The auth_type value which gets assigned to hci_conn->auth_type is
something that's only used for BR/EDR connections and is of no value for
LE connections. It makes therefore little sense to pass it to the
hci_connect_le() function. This patch removes the parameter from the
function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When we establish connections as a consequence of receiving an
advertising report it makes no sense to wait the normal 20 second LE
connection timeout. This patch modifies the hci_connect_le function to
take an extra timeout value and uses a lower 2 second timeout for the
auto-connection case. This timeout is intentionally chosen to be just a
bit higher than the 1.28 second timeout that High Duty Cycle Advertising
uses.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
BR/EDR has the connection request and connection request rejection, but
LE doesn't have anything similar. We still request LE connections to
blocked devices to be disconnected but it's possible that ACL data slips
through before that. The check in l2cap_recv_frame really only needs to
be for LE and not BR/EDR because of this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The calling functions of mgmt_new_conn_param have more information about
the parameters, such as whether the kernel is tracking them or not. It
makes therefore sense to have them pass an initial store_hint value to
the mgmt_new_conn_param function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The ATT channel isn't the only one that we should ensure doesn't receive
data from blocked devices. SMP is another, and in general we don't want
data packets going to any of the various handlers. Therefore, add a
single check to the l2cap_recv_frame function.
The patch fixes at the same time the use of a correct address type. The
blacklist stores the values with the user space facing triple type
wheras hci_conn->dst_type uses the HCI address type (0x00 or 0x01).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch introduces a new Mgmt event called "New Connection Parameter".
This event indicates to userspace the connection parameters values the
remote device requested.
The user may store these values and load them into kernel. This way, next
time a connection is established to that device, the kernel will use those
parameters values instead of the default ones.
This event is sent when the remote device requests new connection
parameters through connection parameter update procedure. This event is
not sent for slave connections.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch renames l2cap_check_conn_param() to hci_check_conn_params()
and moves it to hci_core.h so it can reused in others files. This helper
will be reused in the next patch.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since the link_mode member of the hci_conn struct is a bit field and we
already have a flags member as well it makes sense to merge these two
together. This patch moves all used link_mode bits into corresponding
flags. To keep backwards compatibility with user space we still need to
provide a get_link_mode() helper function for the ioctl's that expect a
link_mode style value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the current LE connection parameters of a slave connection do not
match up with the controller defined values, then trigger the connection
update procedure to allow adjusting them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create a CoC dynamically instead of one fixed channel for communication
to peer devices.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The highly optimized TX path for L2CAP channels and its fragmentation
within the HCI ACL packets requires to copy data from user provided
IO vectors and also kernel provided memory buffers.
This patch allows channel clients to provide a memcpy_fromiovec callback
to keep this optimized behavior, but adapt it to kernel vs user memory
for the TX path. For all kernel internal L2CAP channels, a default
implementation is provided that can be referenced.
In case of A2MP, this fixes a long-standing issue with wrongly accessing
kernel memory as user memory.
This patch originally by Marcel Holtmann.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When allocating the L2CAP SKB for transmission, provide the upper layers
with a clear distinction on what is the header and what is the body
portion of the SKB.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SKB for L2CAP sockets are all allocated in a central callback
in the socket support. Instead of having to pass around the socket
priority all the time, assign it to skb->priority when actually
allocating the SKB.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A deadlock occurs when PDU containing invalid SMP opcode is received on
Security Manager Channel over LE link and conn->pending_rx_work worker
has not run yet.
When LE link is created l2cap_conn_ready() is called and before
returning it schedules conn->pending_rx_work worker to hdev->workqueue.
Incoming data to SMP fixed channel is handled by l2cap_recv_frame()
which calls smp_sig_channel() to handle the SMP PDU. If
smp_sig_channel() indicates failure l2cap_conn_del() is called to delete
the connection. When deleting the connection, l2cap_conn_del() purges
the pending_rx queue and calls flush_work() to wait for the
pending_rx_work worker to complete.
Since incoming data is handled by a worker running from the same
workqueue as the pending_rx_work is being scheduled on, we will deadlock
on waiting for pending_rx_work to complete.
This patch fixes the deadlock by calling cancel_work_sync() instead of
flush_work().
Signed-off-by: Jukka Taimisto <jtt@codenomicon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Default values for various channel settings were missing. This
way channel users do not need to set default values themselves.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
0466 was probably meant to be 0644, there's no reason why everyone
except root could write there.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
The use of __constant_<foo> has been unnecessary for quite awhile now.
Make these uses consistent with the rest of the kernel.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch moves address type conversion (L2CAP address type to HCI
address type) to outside hci_connect_le. This way, we avoid back and
forth address type conversion in a comming patch.
So hci_connect_le() now expects 'dst_type' parameter in HCI address
type convention.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
hci_connect() is a very simple and useless wrapper of hci_connect_acl
and hci_connect_le functions. Addtionally, all places where hci_connect
is called the link type value is passed explicitly. This way, we can
safely delete hci_connect, declare hci_connect_acl and hci_connect_le
in hci_core.h and call them directly.
No functionality is changed by this patch.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that to-be-received keys are properly tracked we no-longer need the
"force" parameter to smp_distribute_keys(). It was essentially acting as
an indicator whether all keys have been received, but now it's just
redundant together with smp->remote_key_dist.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Silently dropping L2CAP data (i.e. due to remote device not obeying
negotiated MTU) is confusing and makes debugging harder.
Signed-off-by: Szymon Janc <szymon.janc@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When we receive a remote identity address during SMP key distribution we
should ensure that any associated L2CAP channel instances get their
address information correspondingly updated (so that e.g. doing
getpeername on associated sockets returns the correct address).
This patch adds a new L2CAP core function l2cap_conn_update_id_addr()
which is used to iterate through all L2CAP channels associated with a
connection and update their address information.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that the LE L2CAP Connection Oriented Channel support has undergone a
decent amount of testing we can make it officially supported. This patch
removes the enable_lecoc module parameter which was previously needed to
enable support for LE L2CAP CoC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that ATT sockets have been converted to use the new L2CAP_CHAN_FIXED
type there is no need to have an extra check for chan->psm in the
l2cap_chan_close function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The sport variable is used to track the allocation of the local PSM
database to ensure no two sockets take the same local PSM. It is
acquired upon bind() but needs to be freed up if the socket ends up
becoming a client one. This patch adds the clearing of the value when
l2cap_chan_connect is called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The L2CAP specification requires us to disconnect an L2CAP channel if
the remote side gives us credits beyond 65535. This patch makes sure we
disconnect the channel in such a situation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The L2CAP specification requires us to disconnect a channel if the
remote device sends us data when it doesn't have any credits to do so.
This patch makes sure that we send the appropriate L2CAP Disconnect
request in this situation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's a le_default_mps variable that can be modified through debugfs
but it was never actually used for determining our MPS value. This patch
fixes the MPS initialization to use the variable instead of a fixed
value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fixed channels have the same source and destination CID. Ensure that the
values get properly initialized when receiving incoming connections and
deriving values from the parent socket.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
ATT channels are not connection oriented so having them use
L2CAP_CHAN_CONN_ORIENTED is quite confusing. Instead, use the new
L2CAP_CHAN_FIXED type and ensure that the MTU and CID values get
properly set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no reason why A2MP should need or deserve its on channel type.
Instead we should be able to group all fixed CID users under a single
channel type and reuse as much code as possible for them. Where CID
specific exceptions are needed the chan-scid value can be used.
This patch renames the current A2MP channel type to a generic one and
thereby paves the way to allow converting ATT and SMP (and any future
fixed channel protocols) to use the new channel type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The only user of l2cap_seq_list_remove() was l2cap_seq_list_pop() which
only removes the head, meaning only the "else if (seq_list->head ==
seq)" branch was ever being used. This patch moves the code from this
branch straight into l2cap_seq_list_pop() and removes the (now useless)
l2cap_seq_list_remove().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a queue for incoming L2CAP data that's received before
l2cap_connect_cfm is called and processes the data once
l2cap_connect_cfm is called. This way we ensure that we have e.g. all
remote features before processing L2CAP signaling data (which is very
important for making the correct security decisions).
The processing of the pending rx data needs to be done through
queue_work since unlike l2cap_recv_acldata, l2cap_connect_cfm is called
with the hci_dev lock held which could cause potential deadlocks.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch moves the l2cap_conn_add, is_valid_psm and l2cap_chan_connect
functions further down in l2cap_core.c. The patch doesn't contain
anything else except the relocation of these functions. By moving the
functions further down the patch enables a subsequent patch that adds a
pending RX queue to be implemented without a forward declaration of a
function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
With the introduction of security level 4, the L2CAP sockets need to
be made aware of this new level. This change ensures that the pairing
requirements are set correctly for these connections.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is initial version of
http://tools.ietf.org/html/draft-ietf-6lo-btle-00
By default the 6LoWPAN support is not activated and user
needs to tweak /sys/kernel/debug/bluetooth/hci0/6lowpan
file.
The kernel needs IPv6 support before 6LoWPAN is usable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If we receive an L2CAP command reject message over LE we should take
appropriate action on the corresponding channel. This is particularly
important when trying to interact with a remote pre-4.1 system using LE
CoC signaling messages. If we don't react to the command reject the
corresponding socket would not be notified until a connection timeout
occurs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The range of valid LE PSMs is 0x0001-0x00ff so the check should be for
"less than or equal to" instead of "less than".
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since there's a nice convenient helper for calculating the minimum of
two values, let's use that one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The values in l2cap_chan that are used for actually transmitting data
only need to be initialized right after we've received an L2CAP Connect
Request or just before we send one. The only thing that we need to
initialize though bind() and connect() is the chan->mode value. This way
all other initializations can be done in the l2cap_le_flowctl_init
function (which now becomes private to l2cap_core.c) and the
l2cap_le_flowctl_start function can be completely removed.
Also, since the l2cap_sock_init function initializes the imtu and omtu
to adequate values these do not need to be part of l2cap_le_flowctl_init.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds entries to debugfs to control the values used for the
MPS and Credits for LE Flow Control Mode.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
LE PSM values have different ranges than those for BR/EDR. The valid
ranges for fixed, SIG assigned values is 0x0001-0x007f and for dynamic
PSM values 0x0080-0x00ff. We need to ensure that bind() and connect()
calls conform to these ranges when operating on LE CoC sockets.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
LE CoC used differend CIC ranges than BR/EDR L2CAP. The start of the
range is the same (0x0040) but the range ends at 0x007f (unlike BR/EDR
where it goes all the way to 0xffff).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The outgoing MTU should only be set upon channel creation to the initial
minimum value (23) or from a remote connect req/rsp PDU.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It doesn't make sense to have an MPS value greater than the configured
MTU value since we will then not be able to fill up the packets to their
full possible size. We need to set the MPS both in flowctl_init()
as well as flowctl_start() since the imtu may change after init() but
start() is only called after we've sent the LE Connection Request PDU
which depends on having a valid MPS value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If the peer gives us zero credits in its connection request or response
we must call the suspend channel callback so the BT_SK_SUSPEND flag gets
set and user space is blocked from sending data to the socket.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Unlike BR/EDR, for LE when we're in the BT_CONNECT state we may or may
not have already have sent the Connect Request. This means that we need
some extra tracking of the request. This patch adds an extra channel
flag to prevent the request from being sent a second time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When receiving fragments over an LE Connection oriented Channel they
need to be collected up and eventually merged into a single SDU. This
patch adds the necessary code for collecting up the fragment skbs to the
channel context and passing them to the recv() callback when the entire
SDU has been received.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds segmentation support for outgoing data packets. Packets
are segmented based on the MTU and MPS values. The l2cap_chan struct
already contains many helpful variables from BR/EDR Enhanced L2CAP which
can be used for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since LE CoC support needs to be enabled through a module option for now
we need to reject any related signaling PDUs in addition to rejecting
the creation of LE CoC sockets (which we already do).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds the necessary discipline for reacting to LE L2CAP
Credits packets, sending those packets, and modifying the known credits
accordingly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We should return credits to the remote side whenever they fall below a
certain level (in our case under half of the initially given amount).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds tracking of L2CAP connection oriented channel local and
remote credits to struct l2cap_chan and ensures that connect requests
and responses contain the right values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The LE connection oriented channels have their own mode with its own
data transfer rules. In order to implement this properly we need to
distinguish L2CAP channels operating in this mode from other modes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch makes the error handling and return logic of l2cap_le_sig_cmd
consistent with its BR/EDR counterpart.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The normal L2CAP Disconnect request and response are also used for LE
connection oriented channels. Therefore, we can simply use the existing
handler functions for terminating LE based L2CAP channels.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg