modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()
modify util/parse-events.c to use debugfs_valid_mountpoint().
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add two more software events that are common to many cpus.
Alignment faults: When a load or store is not aligned properly.
Emulation faults: When an instruction is emulated in software.
Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Previously no indication was given about what went wrong.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":
#./perf record -R -f -e irq:irq_handler_entry --filter irq==18
^C
# ./perf trace
perf-4303 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
See Documentation/trace/events.txt for the syntax of filter
expressions.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Timechart doesn't work if debugfs is not in /sys/kernel/debug/.
Fixed by using global debugfs_path which is filled in by perf.
Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com>
Cc: "Arjan van de Ven" <arjan@linux.intel.com>
LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
openat() is still a young glibc facility, better to not use it in a
non performance critical program (perf list)
Many machines have older glibc (RHEL 4 Update 5 -> glibc-2.3.4-2.36
on my dev machine for example).
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@redhat.com>
LKML-Reference: <4ABB767D.6080004@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The trace event name<->id mapping is dynamic for each kernel
compile. In order for perf.data to be useable outside the actual
system, we thus need to store a table of this mapping for later
use.
This patch adds this table to perf.data, and provides helper
functions for lookup up fields from this table.
To avoid mistakes, lookup-from-table is kept completely seprate
from lookup-from-local-debugfs.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130405.6960d099@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The name length of some trace events is longer than 30, like
sys_enter_sched_get_priority_max and
ext4_mb_discard_preallocations.
Passing those events to perf-record will fail, try:
# ./perf record -f -e syscalls:sys_enter_sched_get_priority_max -F 1 -a
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F4AB.7050205@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement the 'perf sched record' subcommand that adds a
default list of events, turns on raw sampling and system-wide
tracing and passes off the rest of the command to perf record.
This is more convenient than having to specify the events all
the time.
Before:
$ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1
After:
$ perf sched record -f sleep 1
Also fix an assumption in the event string parser that assumed
that strings passed in can be modified. (In this case they wont
be as they come from a readonly constant section.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, when one wants to activate every tracepoint
counters of a subsystem from perf record, the current sequence
is needed:
perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3
This may annoy the most patient of us.
Now we can just do:
perf record -e subsys:*
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
ring-buffer: only enable ring_buffer_swap_cpu when needed
ring-buffer: check for swapped buffers in start of committing
tracing: report error in trace if we fail to swap latency buffer
tracing: add trace_array_printk for internal tracers to use
tracing: pass around ring buffer instead of tracer
tracing: make tracing_reset safe for external use
tracing: use timestamp to determine start of latency traces
tracing: Remove mentioning of legacy latency_trace file from documentation
tracing/filters: Defer pred allocation, fix memory leak
tracing: remove users of tracing_reset
tracing: disable buffers and synchronize_sched before resetting
tracing: disable update max tracer while reading trace
tracing: print out start and stop in latency traces
ring-buffer: disable all cpu buffers when one finds a problem
ring-buffer: do not count discarded events
ring-buffer: remove ring_buffer_event_discard
ring-buffer: fix ring_buffer_read crossing pages
ring-buffer: remove unnecessary cpu_relax
ring-buffer: do not swap buffers during a commit
ring-buffer: do not reset while in a commit
...
This patch improves some (common) inefficiencies in the
handling of directory lookups:
- not using the d_type information returned by the kernel
- constructing (absolute) paths for file operation even though
directory-relative operations using the *at functions is
possible
There are more places to fix but this is a start.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090904193951.GB6186@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While opening a trace event counter, every events are saved in
the trace.info file. But we only want to save the
specifications of the events we are using.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.
So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:
-Wcast-align
-Wformat=2
-Wshadow
-Winit-self
-Wpacked
-Wredundant-decls
-Wstack-protector
-Wstrict-aliasing=3
-Wswitch-default
-Wswitch-enum
-Wno-system-headers
-Wundef
-Wvolatile-register-var
-Wwrite-strings
-Wbad-function-cast
-Wmissing-declarations
-Wmissing-prototypes
-Wnested-externs
-Wold-style-definition
-Wstrict-prototypes
-Wdeclaration-after-statement
And change/fix the perf code to build cleanly under GCC 4.3.2.
The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.
I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.
If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)
I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.
I also left out a few warnings that are not supported in older
compilers.
[ Note that these changes might break the build on older
compilers i did not test, or on non-x86 architectures that
produce different warnings, so more testing would be welcome. ]
Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new flag field while opening a tracepoint perf counter:
-e tracepoint_subsystem:tracepoint_name:flags
This is intended to be generic although for now it only supports the
r[e[c[o[r[d]]]]] flag:
./perf record -e workqueue:workqueue_insertion:record
./perf record -e workqueue:workqueue_insertion:r
will have the same effect: enabling the raw samples record for
the given tracepoint counter.
In the future, we may want to support further flags, separated
by commas.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new syscall tracepoints names can be too long for the 'perf list'
output.
Add a few more characters.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brice Goglin reported:
> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.
Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs
filesystem in /proc/mounts, but also allows the user to specify
'--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR'
Signed-off-by: Jason Baron <jbaron@redhat.com>
[ also made it probe "/debug" by default ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090721181629.GA3094@redhat.com>
Add support to 'perf list' and 'perf stat' for kernel tracepoints. The
implementation creates a 'for_each_subsystem' and 'for_each_event' for
easy iteration over the tracepoints.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>
The cache events contain '$' which will hit shell variable
expansion. To avoid confusion change this to 'cache', ie
L1-d$-loads becomes L1-dcache-loads.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090706120131.GB4391@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations
All things considered it was still worth it so lets try with
this enabled for now.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reworks the parser for event descriptors to make it more
consistent in what it accepts. It is now structured as a
recursive descent parser for the following grammar:
events ::= event ( ("," | space) space* event )*
event ::= ( raw_event | numeric_event | symbolic_event |
generic_hw_event ) [ event_modifier ]
raw_event ::= "r" hex_number
numeric_event ::= number ":" number
number ::= decimal_number | "0x" hex_number | "0" octal_number
symbolic_event ::= string_from_event_symbols_array
generic_hw_event::= cache_type ( "-" ( cache_op | cache_result ) )*
event_modifier ::= ":" ( "u" | "k" | "h" )+
with the extra restriction that you can have at most one
cache_op and at most one cache_result.
We pass the current string pointer by reference (i.e. as a
const char **) to the various parsing functions so that they
can advance the pointer to indicate how much they consumed.
They return 0 if they didn't recognize the thing at the pointer
or 1 if they did (and advance the pointer past it).
This also fixes parse_aliases to take the longest matching
alias from the table, not the first one. Otherwise "l1-data"
would match the "l1-d" alias and the "ata" would not be
consumed.
This allows event modifiers indicating what processor modes to
count in to be applied to any event, not just numeric events,
and adds a ":h" modifier to indicate counting in hypervisor
mode. Specifying ":u" now sets both exclude_kernel and
exclude_hv, and so on. Multiple modes can be specified, e.g.
":uk" will count in user or hypervisor mode (i.e. only
exclude_kernel will be set).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <19018.53826.843815.189847@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add 'l1d' and 'l1i' aliases again as shortcuts - just dont make them
the primary display alias.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1245945462.9157.11.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Made new table for cache operartion stat 'hw_cache_stat' as:
L1I : Read and prefetch only
ITLB and BPU : Read-only
introduce is_cache_op_valid() for cache operation validity
And checks for valid cache operations.
Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245930367.5308.33.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"faults" should be alias for "page-faults"
Also fixed alignment and 80 characters issue
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By introducing alias member in event_symbol :
1. duplicate lines are removed, like:
cpu-cycles and cycles
branch-instructions and branches
context-switches and cs
cpu-migrations and migrations
2. We can also add alias for another events.
Now ./perf list looks like :
List of pre-defined events (to be used in -e):
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
cache-references [Hardware event]
cache-misses [Hardware event]
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cpu-clock [Software event]
task-clock [Software event]
page-faults [Software event]
faults [Software event]
minor-faults [Software event]
major-faults [Software event]
context-switches OR cs [Software event]
cpu-migrations OR migrations [Software event]
rNNN [raw hardware event descriptor]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define separate declarations for H/W and S/W events to:
1. Shorten name to save some space so that we can add more members
2. Fix alignment
3. Avoid declaring HARDWARE/SOFTWARE again and again.
Removed unused CR(x, y)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long. This causes compiler warnings every time we
print a __u64 value with %Lx.
Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8. These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.
The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__". The other changes are:
* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
to kill two remaining warnings.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- use IPC for the instruction normalization output
- CPUs for the CPU utilization factor value.
- print out time elapsed like the other rows
- tidy up the task-clocks/cpu-clocks printout
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Otherwise all L1-instruction aliases will be recognized as
L1-data by strcasestr() when calling function parse_aliases.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090612031706.GA22126@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
gcc warned about this bug:
util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>