It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f86f9beed730eaad0bdcc18b18817b3d221e16e2.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/82d11bf634094f44a7469a096de3d3768314d6bc.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: gen6_rps_reset_ei() is in i915_irq.c not intel_pm.c.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/adc6463b95eef3440fba9826793f7d1c5f3b0b4a.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9f02ae09123866bc55269175ab75e844ffbd6ac.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8348620b32cb4438ccfb5f7bbe9a18ff6b7c48a0.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c507e15fef019541da5bb33f2fbe920a5ad2f3dc.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b01cae3b5307d31c34de2321d6d2913f1cc39a12.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe5928586b4ca538cc4bc99212c5b699e891c75e.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Fix checkpatch whitespace complaint
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e776690bf139ccdd0306b30df08dc68e74603de.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Remove stray newline (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/db44ba199c86f24bfa9e490531eddf51cccd89da.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Add function argument names to fix checkpatch warning
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44ceebca0206de9c40dc6794b660d84b8994f700.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b8e9d1fa8f0f0420ecc65063bdb7d068c13086e.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/61d159117475a48a5db7bd7d652c198d4fa08d7b.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19c39bfcfb82f50c77382e8dea4fe1ad6cd043ed.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0284c4d62effa5bad72ce034206c26e3aa02884.1554461791.git.jani.nikula@intel.com
If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.
v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()
v4:
- For consistency call intel_set_cdclk_post_plane_update() only during
modesets (and not fastsets).
v5:
- Remove the logic to update the CD2X divider on-the-fly on ICL, since
only a divider of 1 is supported there. Clint also noticed that the
pipe select bits in CDCLK_CTL are oddly defined on ICL, it's not clear
yet whether that's only an error in the specification.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327101321.3095-1-imre.deak@intel.com
The old state will be needed by an upcoming patch to determine if the
commit increases or decreases CDCLK, so move the old state to the atomic
state (while keeping the new one in dev_priv). cdclk.logical and
cdclk.actual in the atomic state isn't used atm anywhere after the
atomic check phase, so this should be safe.
v2:
- Use swap() instead of opencoding it. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-2-imre.deak@intel.com
CDCLK has to be at least twice the BLCK regardless of audio. Audio
driver has to probe using this hook and increase the clock even in
absence of any display.
v2: Use atomic refcount for get_power, put_power so that we can
call each once(Abhay).
v3: Reset power well 2 to avoid any transaction on iDisp link
during cdclk change(Abhay).
v4: Remove Power well 2 reset workaround(Ville).
v5: Remove unwanted Power well 2 register defined in v4(Abhay).
v6:
- Use a dedicated flag instead of state->modeset for min CDCLK changes
- Make get/put audio power domain symmetric
- Rebased on top of intel_wakeref tracking changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-1-imre.deak@intel.com
Allow DP MST to output any color depth. This means deep color as
well as falling back to 6bpc if we would otherwise require too
much bandwidth.
TODO: We should probably extend bw_contstrained scheme to force
all streams on the link to 6bpc if we can't fit the new stream(s)
otherwise.
v2: Use a proper for-loop (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-3-ville.syrjala@linux.intel.com
By the time cnl_ddi_clock_get() is called we've just got the hw state
from the pll registers. We don't need to read them again: we can rather
reuse what was cached in the dpll_hw_state.
This also affects the code for ICL since it partially reuses the CNL
code. However the more intricate part on ICL is left for another patch.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-4-lucas.demarchi@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Since commit b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we
submit the first batch/context"), intel_suspend_gt_powersave() has been
a no-op. As we still do not need to do anything explicitly on suspend
(we do everything required on idling), remove the defunct function.
References: b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context")
Suggested-by: "Hiatt, Don" <don.hiatt@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk
Rename intel_find_panel_downclock() to intel_panel_edid_downclock_mode()
to make it clear it's looking for the downclock mode in the EDID.
And while at it polish the implementation a bit as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Both LVDS and eDP have the same code to look up the preferred mode
from the connector probed_modes list. Move the code to a common
location.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Change the api in order to enable callers that can't supply a valid
intel_plane pointer, as would be the case prior to calling
drm_universal_plane_init.
v4:
- Rename variables and move a declaration (Ville)
v6:
- Rebase and fix merge conflict
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-3-git-send-email-kevin.strasser@intel.com
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlyA6D8ACgkQ/lWMcqZw
E8MkeA/+KRMSXY2ljbi59SKRx0/pQ0HPoZv4sb7J7Rr0IHTEOfTfxJRNjIbJDHvu
DR9F6+dx43XExWNr4mbKQ3Fooc7zKUJ/Fn1MrwVwr647LIBHtsw2VQ3PAcIK50Ph
ml+rDahrEAoUF8FMAXAK8IjXh5BXG/HSOAu14JMxQvKGm4/CmAgKFnPYU16Eg1Oc
kEi394cJ/DKsalXqIQiFDmCViuAYKUbMRoYYkAa/gr451zuGVoIOwSbhHTNcvjc2
cnF8oMAgjVdhp0egtKOqCHGXqSd0l4LMxjy5zOyatpgmMELK7Ns1dyWMtyPFQWKp
pgD/QoGWn7aTMR1ihh6u0tNOfRIHQxrXVXAjHfA2uWVQC6Ms9cDilNkyizOXrcb6
r9tAOTeGQI6mhVhQhaVzi/NSYxrsXBt8Bo6Spj8QYupfNGU0tlOxwMqtcHXrJZ1N
06/+IPXwzYVkxzhtR3ORvwqFOkIT4ZvOc5zxT27TKSBR/HMDa4CFJFrcAAR+3eN+
Wn6wLDDxPW+ZA7Oitrq5iAJaXif8QEEtXETS/S3ZubDFw0qQYvFJbmpNOSMd9qk4
WfxUhzMiLm2DuD44b3x28fi0ekLehquWFuyBrIyAic5K+GDMJamqSBgKXXB5Oen6
hbL1mBq5ZdMZRfOR+ss2QwlbI47deHdhhEq36Rl7gi1Pub2qNuY=
=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
Other features like PSR2 also needs to be disabled while getting CRC
so lets rename ips_force_disable to crc_enabled, drop all this checks
for pipe A and HSW and BDW and make it generic and
hsw_compute_ips_config() will take care of all the checks removed
from here.
v2: Renaming and parameter changes to the functions that prepares the
commit (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-5-jose.souza@intel.com
-----BEGIN PGP SIGNATURE-----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=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
Add code to read the infoframes from the video DIP and unpack them into
the crtc state.
v2: Make the read funcs return void (Daniel)
Drop the duplicate infoframe enabled checks (Daniel)
Add a FIXME for lspcon infoframe readout
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-6-ville.syrjala@linux.intel.com
Store the infoframes in the crtc state and precompute them in
.compute_config(). While precomputing we'll also fill out the
inforames.enable bitmask appropriately.
v2: Drop the null packet stuff (Daniel)
Add a FIXME for lspcon
v3: .compute_config() now returns int
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-5-ville.syrjala@linux.intel.com
Store the mask of enabled infoframes in the crtc state. We'll start
with just the readout for HDMI encoder, and we'll expand this
to compute the bitmask in .compute_config() later. SDVO will also
follow later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-4-ville.syrjala@linux.intel.com
We want to start tracking which infoframes are enabled, so let's replace
the boolean flag with a bitmask.
We'll abstract the bitmask so that it's not platform dependent. That
will allow us to examine the bitmask later in platform independent code.
v2: Don't map VIDEO_DIP_ENABLE to the null packet (Daniel)
Put a FIXME in the lspcon function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-3-ville.syrjala@linux.intel.com
Implements the
Waitqueue is created to wait for CP_IRQ
Signaling the CP_IRQ arrival through atomic variable.
For applicable DP HDCP2.2 msgs read wait for CP_IRQ.
As per HDCP2.2 spec "HDCP Transmitters must process CP_IRQ interrupts
when they are received from HDCP Receivers"
Without CP_IRQ processing, DP HDCP2.2 H_Prime msg was getting corrupted
while reading it based on corresponding status bit. This creates the
random failures in reading the DP HDCP2.2 msgs.
v2:
CP_IRQ arrival is tracked based on the atomic val inc [daniel]
Recording the reviewed-by Daniel from IRC.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-16-git-send-email-ramalingam.c@intel.com
Implements the link integrity check once in 500mSec.
Once encryption is enabled, an ongoing Link Integrity Check is
performed by the HDCP Receiver to check that cipher synchronization
is maintained between the HDCP Transmitter and the HDCP Receiver.
On the detection of synchronization lost, the HDCP Receiver must assert
the corresponding bits of the RxStatus register. The Transmitter polls
the RxStatus register and it may initiate re-authentication.
v2:
Rebased.
v3:
enum check_link_response is used check the link status [Uma]
v4:
Rebased as part of patch reordering.
v5:
Required members of intel_hdcp is defined [Sean Paul]
v6:
hdcp2_check_link is cancelled at required places.
v7:
Rebased for the component i/f changes.
Errors due to the sinks are reported as DEBUG logs.
v8:
hdcp_check_work is used for both hdcp1 and hdcp2 check_link [Daniel]
hdcp2.2 encryption status check is put under WARN_ON [Daniel]
drm_hdcp.h changes are moved into separate patch [Daniel]
v9:
enum check_link_status is defined at intel_drv.h [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-11-git-send-email-ramalingam.c@intel.com
Implements HDCP2.2 authentication for hdcp2.2 receivers, with
following steps:
Authentication and Key exchange (AKE).
Locality Check (LC).
Session Key Exchange(SKE).
DP Errata for stream type configuration for receivers.
At AKE, the HDCP Receiver’s public key certificate is verified by the
HDCP Transmitter. A Master Key k m is exchanged.
At LC, the HDCP Transmitter enforces locality on the content by
requiring that the Round Trip Time (RTT) between a pair of messages
is not more than 20 ms.
At SKE, The HDCP Transmitter exchanges Session Key ks with
the HDCP Receiver.
In DP HDCP2.2 encryption and decryption logics use the stream type as
one of the parameter. So Before enabling the Encryption DP HDCP2.2
receiver needs to be communicated with stream type. This is added to
spec as ERRATA.
This generic implementation is complete only with the hdcp2 specific
functions defined at hdcp_shim.
v2: Rebased.
v3:
%s/PARING/PAIRING
Coding style fixing [Uma]
v4:
Rebased as part of patch reordering.
Defined the functions for mei services. [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Required intel_hdcp members are defined [Sean Paul]
v6:
Typo of cipher is Fixed [Uma]
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new interface.
Avoid using bool structure members. [Tomas]
v8: Rebased.
v9:
bool is used in struct intel_hdcp [Daniel]
config_stream_type is redesigned [Daniel]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-8-git-send-email-ramalingam.c@intel.com
Considering that HDCP2.2 is more secure than HDCP1.4, When a setup
supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.
When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is
enabled.
This change implements a sequence of enabling and disabling of
HDCP2.2 authentication and HDCP2.2 port encryption.
v2:
Included few optimization suggestions [Chris Wilson]
Commit message is updated as per the rebased version.
intel_wait_for_register is used instead of wait_for. [Chris Wilson]
v3:
Extra comment added and Style issue fixed [Uma]
v4:
Rebased as part of patch reordering.
HDCP2 encryption status is tracked.
HW state check is moved into WARN_ON [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Merged patches related to hdcp2.2 enabling and disabling [Sean Paul].
Required shim functionality is defined [Sean Paul]
v6:
Return values are handles [Uma]
Realigned the code.
Check for comp_master is removed.
v7:
HDCP2.2 is attempted only if mei interface is up.
Adjust to the new interface
Avoid bool usage in struct [Tomas]
v8:
mei_binded status check is removed.
%s/hdcp2_in_use/hdcp2_encrypted
v9:
bool is used in struct intel_hdcp. [Daniel]
v10:
panel is replaced with sink [Uma]
Mei interface decided the hdcp2_capability.
WARN_ON if hdcp_enable is called when hdcp state is ENABLED.
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-7-git-send-email-ramalingam.c@intel.com
"hdcp_encrypted" flag is defined to denote the HDCP1.4 encryption status.
This SW tracking is used to determine the need for real hdcp1.4 disable
and hdcp_check_link upon CP_IRQ.
On CP_IRQ we filter the CP_IRQ related to the states like Link failure
and reauthentication req etc and handle them in hdcp_check_link.
CP_IRQ corresponding to the authentication msg availability are ignored.
WARN_ON is added for the abrupt stop of HDCP encryption of a port.
v2:
bool is used in struct for the cleaner coding. [Daniel]
check_link work_fn is scheduled for cp_irq handling [Daniel]
v3:
rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-6-git-send-email-ramalingam.c@intel.com
Defining the mei-i915 interface functions and initialization of
the interface.
v2:
Adjust to the new interface changes. [Tomas]
Added further debug logs for the failures at MEI i/f.
port in hdcp_port data is equipped to handle -ve values.
v3:
mei comp is matched for global i915 comp master. [Daniel]
In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel]
mei wrappers are adjusted as per the i/f change [Daniel]
v4:
port initialization is done only at hdcp2_init only [Danvet]
v5:
I915 registers a subcomponent to be matched with mei_hdcp [Daniel]
v6:
HDCP_disable for all connectors incase of comp_unbind.
Tear down HDCP comp interface at i915_unload [Daniel]
v7:
Component init and fini are moved out of connector ops [Daniel]
hdcp_disable is not called from unbind. [Daniel]
v8:
subcomponent name is dropped as it is already merged.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-5-git-send-email-ramalingam.c@intel.com
Add the HDCP2.2 initialization to the existing HDCP1.4 stack.
v2:
mei interface handle is protected with mutex. [Chris Wilson]
v3:
Notifiers are used for the mei interface state.
v4:
Poll for mei client device state
Error msg for out of mem [Uma]
Inline req for init function removed [Uma]
v5:
Rebase as Part of reordering.
Component is used for the I915 and MEI_HDCP interface [Daniel]
v6:
HDCP2.2 uses the I915 component master to communicate with mei_hdcp
- [Daniel]
Required HDCP2.2 variables defined [Sean Paul]
v7:
intel_hdcp2.2_init returns void [Uma]
Realigning the codes.
v8:
Avoid using bool structure members.
MEI interface related changes are moved into separate patch.
Commit msg is updated accordingly.
intel_hdcp_exit is defined and used from i915_unload
v9:
Movement of the hdcp_check_link is moved to new patch [Daniel]
intel_hdcp2_exit is removed as mei_comp will be unbind in i915_unload.
v10:
bool is used in struct to make coding simpler. [Daniel]
hdmi hdcp init is placed correctly after encoder attachment.
v11:
hdcp2_capability check is moved into hdcp.c [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-4-git-send-email-ramalingam.c@intel.com
This patch attaches the colorspace connector property to the
hdmi connector. Based on colorspace change, modeset will be
triggered to switch to new colorspace.
Based on colorspace property value create an infoframe
with appropriate colorspace. This can be used to send an
infoframe packet with proper colorspace value set which
will help to enable wider color gamut like BT2020 on sink.
This patch attaches and enables HDMI colorspace, DP will be
taken care separately.
v2: Merged the changes of creating infoframe as well to this
patch as per Maarten's suggestion.
v3: Addressed review comments from Shashank. Separated HDMI
and DP colorspaces as suggested by Ville and Maarten.
v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard. Handle the default case properly.
v5: Merged the DP handling along with platform colorspace
handling as per Shashank's comments.
v6: Reverted to old design of exposing all colorspaces to
userspace as per Ville's review comment
v7: Fixed a checkpatch complaint, Addressed Maarten' review
comment, updated the RB from Maarten and Jani's ack.
v8: Moved colorspace AVI Infoframe programming to drm core and
removed from driver as per Ville's suggestion.
v9: Added a check to only allow RGB colorpsaces to be set in
infoframe though the colorspace property. Since there is no output
csc property to control planar formats and it will be added later.
Changes for RGB->YUV conversion inside driver without userspace
knowledge is still supported. This is as per Ville's suggestion.
v10: Fixed an error in if check.
v11: Dropped the check for planar vs RGB and allow all the colorspaces.
Onus will be on userspace to pick whatever pipe output it is able to
drive.
v12: Added Ville's RB.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-4-git-send-email-uma.shankar@intel.com
As time goes by, usage of generic ioctls such as drm_syncobj and
sync_file are on the increase bypassing i915-specific ioctls like
GEM_WAIT. Currently, we only apply waitboosting to our driver ioctls as
we track the file/client and account the waitboosting to them. However,
since commit 7b92c1bd05 ("drm/i915: Avoid keeping waitboost active for
signaling threads"), we no longer have been applying the client
ratelimiting on waitboosts and so that information has only been used
for debug tracking.
Push the application of waitboosting down to the common
i915_request_wait, and apply it to all foreign fence waits as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213092504.25709-1-chris@chris-wilson.co.uk
GEN11+ onwards an output csc hardware block has been added.
This is after the pipe gamma block and is in addition to the
legacy pipe CSC block. Primary use case for this block is to
convert RGB to YUV in case sink supports YUV.
This patch adds supports for the same.
v2: This is added after splitting the existing ICL pipe CSC
handling. As per Matt's suggestion, made this to co-exist
with existing pipe CSC, wherein both can be enabled if a
certain usecase arises.
v3: Fixed an issue with co-existence of output csc and normal
pipe csc, spotted by Matt. Put the csc mode flag enabling to
color_check to align with atomic.
v4: Fixed macro alignment and checkpatch complaints wrt line over
100 characters limit.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-5-git-send-email-uma.shankar@intel.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
Previously, we were able to rely on the recursive properties of
struct_mutex to allow us to serialise revoking mmaps and reacquiring the
FENCE registers with them being clobbered over a global device reset.
I then proceeded to throw out the baby with the bath water in order to
pursue a struct_mutex-less reset.
Perusing LWN for alternative strategies, the dilemma on how to serialise
access to a global resource on one side was answered by
https://lwn.net/Articles/202847/ -- Sleepable RCU:
1 int readside(void) {
2 int idx;
3 rcu_read_lock();
4 if (nomoresrcu) {
5 rcu_read_unlock();
6 return -EINVAL;
7 }
8 idx = srcu_read_lock(&ss);
9 rcu_read_unlock();
10 /* SRCU read-side critical section. */
11 srcu_read_unlock(&ss, idx);
12 return 0;
13 }
14
15 void cleanup(void)
16 {
17 nomoresrcu = 1;
18 synchronize_rcu();
19 synchronize_srcu(&ss);
20 cleanup_srcu_struct(&ss);
21 }
No more worrying about stop_machine, just an uber-complex mutex,
optimised for reads, with the overhead pushed to the rare reset path.
However, we do run the risk of a deadlock as we allocate underneath the
SRCU read lock, and the allocation may require a GPU reset, causing a
dependency cycle via the in-flight requests. We resolve that by declaring
the driver wedged and cancelling all in-flight rendering.
v2: Use expedited rcu barriers to match our earlier timing
characteristics.
v3: Try to annotate locking contexts for sparse
v4: Reduce selftest lock duration to avoid a reset deadlock with fences
v5: s/srcu/reset_backoff_srcu/
v6: Remove more stale comments
Testcase: igt/gem_mmap_gtt/hang
Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-2-chris@chris-wilson.co.uk
Planes scanning out C8 will want to use the legacy lut as
their palette. That means the LUT content are unlikely to
be useful for gamma correction on other planes. Thus we
should disable pipe gamma for all the other planes. And
we should reject any non legacy LUT configurations when
C8 planes are present.
Fixes the appearance of the hw cursor when running
X -depth 8.
Note that CHV with it's independent CGM degamma/gamma LUTs
could probably use the CGM for gamma correction even when
the legacy LUT is used for C8. But that would require a
new uapi for configuring the legacy LUT and CGM LUTs at
the same time. Totally not worth it.
v2: Fix typo (Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-7-ville.syrjala@linux.intel.com
Just like we did for pipe gamma, let's also track the pipe csc
state. The hardware only exists on ILK+, and currently we always
enable it on hsw+ and never on any other platforms. Just like
with pipe gamma, the primary plane control register is used
for the readout on pre-SKL, and the pipe bottom color register
on SKL+.
v2: Rebase
v3: Allow fastboot with csc_enable changes (Maarten)
Deal with HAS_GMCH
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-4-ville.syrjala@linux.intel.com
Track whether pipe gamma is enabled or disabled. For now we
stick to the current behaviour of always enabling gamma. But
we do get working state readout for this now. On SKL+ we use
the pipe bottom color as our hardware state. On pre-SKL we
read the state back from the primary plane control register.
That only really correct for g4x+, as older platforms never
gamma correct pipe bottom color. But doing the readout the
same way on all platforms is fine, and there is no other way
to do it really.
v2: Initialize val at declaration (Uma)
Drop the bogus skl scaler comment change (Uma)
Rebase
v3: Allow fastboot with gamma_enable changes (Maarten)
v4: Drop the PIPE_BOTTOM_COLOR write from
intel_update_pipe_config() again. It snuck back in
during the rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207203913.5529-1-ville.syrjala@linux.intel.com
Changing the i915_edp_psr_debug was enabling, disabling or switching
PSR version by directly calling intel_psr_disable_locked() and
intel_psr_enable_locked(), what is not the default PSR path that will
be executed by real users.
So lets force a fastset in the PSR CRTC to trigger a pipe update and
stress the default code path.
Recently a bug was found when switching from PSR2 to PSR1 while
enable_psr kernel parameter was set to the default parameter, this
changes fix it and also fixes the bug linked bellow were DRRS was
left enabled together with PSR when enabling PSR from debugfs.
v2: Handling missing case: disabled to PSR1
v3: Not duplicating the whole atomic state(Maarten)
v4: Adding back the missing call to intel_psr_irq_control(Dhinakaran)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108341
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206211845.5322-1-jose.souza@intel.com
Split the color management hooks along the single vs. double
buffered registers line. Of the currently programmed registers
GAMMA_MODE and the ilk+ pipe CSC are double buffered, the
LUTS and CHV CGM block are single buffered.
The double buffered register will be programmed during the
normal pipe update with evasion, and also during pipe enable
so that the settings will already be correct when the pipe
starts up before the planes are enabled.
The single buffered registers are currently programmed before
the vblank evade. Which is totally wrong, but we'll correct
that later.
v2: Add some docs to explain the two vfuncs (Matt,Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass the crtc state etc. as const to the color management commit
functions. And while at it polish some of the local variables.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On g4x+ the pipe gamma enable bit for the primary plane affects
the pipe bottom color as well. The same for the pipe csc enable
bit on ilk+. Thus we must configure those bits correctly even
when the primary plane is disabled.
To make the feasible let's split those settings from the
plane_ctl() function into a seprate funciton that we can
call from the ->disable_plane() hook as well.
For consistency we'll do that on all the plane types. While
that has no real benefits at this time, it'll become useful
when we start to control the pipe gamma/csc enable bits
dynamically when we overhaul the color management code.
On pre-g4x there doesn't appear to be any way to gamma
correct the pipe bottom color, but sticking to the same
pattern doesn't hurt. And it'll still help us to do
crtc state readout correctly for the pipe gamma enable
bit for the color management overhaul.
An alternative apporach would be to still precompute these
bits into plane_state->ctl, but that would require that we
run through the plane check even when the plane isn't logically
enabled on any crtc. Currently that condition causes us to
short circuit the entire thing and not call ->check_plane().
There would also be some chicken and egg problems with
->check_plane() vs. crtc color state check that would
requite splitting certain things into multiple steps.
So all in all this seems like the easier route.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcVVKOAAoJEPpiX2QO6xPKzpEH/11faCaucfkejXnR2ff3H/Rc
EQILDB+SFwzKYaxd8pLHXJ7D8stmBGW4i086bic1JFTxIi/MtQv5rfOO87jqu1DU
3FFgCLuovzmheKVMuPxnSwGXn2ZI3RWPoDrH7OGaOtKuNAfoFTL9upZYsmBOyA+8
srraU1zHhhR3pawqqVpGrXCVToKSYQc/mh9Od1v491yoqMEhC6r2JaGiePZQldn9
J99ouBDOHMM1f45UX4+ORNQB951sQhJ4SW8e2bi2jKuc5WNmX3+tGLYdKemq3OYN
vi3a4xwSPkhbGWUSQtT7Cy6e2p43p/k7CwVl1iEESVB7HOqINwmxY/UIxm3ap1s=
=Q8JK
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Make background color and LUT more robust (Matt)
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202082911.GA6615@intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXFRb/wAKCRDj7w1vZxhR
xXj2AQDFAkH0/tksJ+T6yrHZXQE7q/6fAWTlrDXLo7Nb1hhfswEA1AyaHmZJA0Ar
u7S+4Gfzs/gisw9Jr4bqQaerEpYJxQA=
=qumD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-02-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201144749.t3abxvguhstu6bcl@flea
Just like the frame counter, the pixel counter also reads zero
all the time when the TV encoder is used. Fortunately the
scanline counter still works sufficiently well so let's use that
to correct the vblank timestamps. Otherwise the timestamps may
en up out of whack, and since we use them to guesstimate the
vblank counter value that may end up incorrect as well.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125181931.19482-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
Restore our saved values for backlight. This way even with fastset on
S4 resume we will correctly restore the backlight to the active values.
Changes since v1:
- Call enable_backlight() when backlight.level is set. On suspend
backlight.enabled is always cleared, this makes it not a good
indicator. Also check for crtc->state->active.
Changes since v2:
- Use the new update_pipe() callback to run this on resume as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tolga Cakir <cevelnet@gmail.com>
Cc: Basil Eric Rabi <ericbasil.rabi@gmail.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-1-maarten.lankhorst@linux.intel.com
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcN9waAAoJEPpiX2QO6xPKW3oH/AkR8oFAcCF8VCYtPHnRUV6F
AsKYG57NMfWH3tfJRg+W5gVtPV+gxOv5IIf6DHjoT2nR0N/r57sGlpKaR4uhq14r
NUK6+cEoNDSDr3zdGt5QI3p8YokEo5MFIVYNPD9THO0hz4uvlzowru1bSC5bJvjn
RvMsb4SUYFMA3BmHNsSczPPVuJLccndl5JFv8oUOrtA5ksct/8G3CI6V2KSOwT7W
ebjrQ56vFMLuDMYwgfrss5sFMoRT60Da0C6dCroHKOzB9L/w7oPOVfwNE9miDRCx
7IRIfICiPTCB2GsJ635sXet2sMV7RFxSjKkDND5iwV2vp96yqAwEjhXJq3t8MCE=
=MqY8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com
Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.
So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.
Thanks to Ville Syrjälä for pointing this out!
Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
intel_hdmi_compute_config()
[Cherry-picked from drm-misc-next to drm-intel-next-queued to fix
linux-next & drm-tip conflict, while waiting for proper propagation of
the DP MST series that this commit fixes. In hindsight, a topic branch
might have been a better approach for it.]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
(cherry picked from commit 96550555a7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.
So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.
Thanks to Ville Syrjälä for pointing this out!
Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
intel_hdmi_compute_config()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk
Frequently, we use intel_runtime_pm_get/_put around a small block.
Formalise that usage by providing a macro to define such a block with an
automatic closure to scope the intel_runtime_pm wakeref to that block,
i.e. macro abuse smelling of python.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-15-chris@chris-wilson.co.uk
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,
v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
Everytime we take a wakeref, record the stack trace of where it was
taken; clearing the set if we ever drop back to no owners. For debugging
a rpm leak, we can look at all the current wakerefs and check if they
have a matching rpm_put.
v2: Use skip=0 for unwinding the stack as it appears our noinline
function doesn't appear on the stack (nor does save_stack_trace itself!)
v3: Allow rpm->debug_count to disappear between inspections and so
avoid calling krealloc(0) as that may return a ZERO_PTR not NULL! (Mika)
v4: Show who last acquire/released the runtime pm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-1-chris@chris-wilson.co.uk
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Move the CEA-861 QS bit handling entirely into the edid code. No
need to bother the drivers with this.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
When we are doing a fastset (needs_modeset=false, update_pipe=true) we
may need to update some encoder-level things such as checking that PSR
is enabled.
This commit adds an update_pipe callback to intel_encoder and a new
intel_encoders_update_pipe helper which calls this for all encoders
connected to a crtc. The new intel_encoders_update_pipe helper is called
from intel_update_crtc when doing a fastset.
Changes in v2:
-Name the new encoder callback update_pipe instead of just update
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220132120.15318-1-hdegoede@redhat.com
Atm HPD disconnect events on TypeC ports will break things, since we'll
switch the TypeC mode (between legacy and disconnected modes as well as
among USB DP alternate, Thunderbolt alternate and disconnected modes) on
the fly from the HPD disconnect interrupt work while the port may be
still active.
Even if the port happens to be not active during the disconnect we'd
still have a problem during a subsequent modeset or AUX transfer that
could happen regardless of the port's connected state. For instance the
system resume display mode restore code and userspace could perform a
modeset on the port or userspace could start an AUX transfer even if the
port is in disconnected state.
To fix this keep TypeC legacy ports in legacy mode whenever we're not
suspended. This mode is a static configuration as opposed to the
Thunderbolt and USB DP alternate modes between which we can switch
dynamically.
We determine if a TypeC port is legacy (wired to a legacy HDMI or a
legacy DP connector) via the VBT DDI port specific USB-TypeC and
Thunderbolt flags. If both these flags are cleared then the port is
configured for legacy mode.
On such legacy ports we'll run the TypeC PHY connect sequence explicitly
during driver loading and system resume (vs. running the sequence during
HPD processing). The connect will succeed even if the display is not
connected to begin with (or disappears during the suspended state) since
for legacy ports the PORT_TX_DFLEXDPPMS / DP_PHY_MODE_STATUS_COMPLETED
flag is always set (as opposed to the USB DP alternate mode where it
gets set only when a display is connected).
Correspondingly run the TypeC PHY disconnect sequence during system
suspend and driver unloading. For the unloading case I had to split
up intel_dp_encoder_destroy() to be able to have the 1. flush any
pending encoder work, 2. disconnect TC PHY, 3. call DRM core cleanup and
kfree on the encoder object.
For now run the PHY disconnect during suspend only for TypeC legacy
ports. We will need to disconnect even in USB DP alternate mode in the
future, but atm we don't have a way to reconnect the port in this mode
during resume if the display disappears while being suspended. So for
now punt on this case.
Note that we do not disconnect the port during runtime suspend; in
legacy mode there are no shared HW resources (PHY lanes) with other HW
blocks (USB), so no need to release / reacquire these resources as with
USB DP alternate mode. The only reason to disconnect legacy ports during
system suspend is that the PORT_TX_DFLEXDPPMS /
DP_PHY_MODE_STATUS_COMPLETED flag must be rechecked and the port must be
connected again during system resume. We'll also have to turn the check
for this flag into a poll, after figuring out what's the proper timeout
value for it.
v2:
- Remove the redundant special casing of legacy mode when doing a
disconnect in icl_tc_port_connected(). It's guaranteed already that we
won't disconnect legacy ports in that function.
- Add a note about the new intel_ddi_encoder_destroy() hook.
- Reword the commit message after switching to the VBT based detection.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108070
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108924
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214182703.18865-4-imre.deak@intel.com
DSC can be supported per DP connector. This patch adds a per connector
debugfs node to expose DSC support capability by the kernel.
The same node can be used from userspace to force DSC enable.
force_dsc_en written through this debugfs node is used to force
DSC even for lower resolutions.
Credits to Ville Syrjala for suggesting the proper locks to be used
and to Lyude Paul for explaining how to use them in this context
v8:
* Add else if (ret) for drm_modeset_lock (Lyude)
v7:
* Get crtc, crtc_state from connector atomic state
and add proper locks and backoff (Ville, Chris Wilson, Lyude)
(Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>)
* Use %zu for printing size_t variable (Lyude)
v6:
* Read fec_capable only for non edp (Manasi)
v5:
* Name it dsc sink support and also add
fec support in the same node (Ville)
v4:
* Add missed connector_status check (Manasi)
* Create i915_dsc_support node only for Gen >=10 (manasi)
* Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
v3:
* Combine Force_dsc_en with this patch (Ville)
v2:
* Use kstrtobool_from_user to avoid explicit error checking (Lyude)
* Rebase on drm-tip (Manasi)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206005407.4698-1-manasi.d.navare@intel.com
Try to be more consistent about intel_* types rather than drm_* types
for lower-level driver functions. While we're at it, let's also be more
consistent with state variable naming (half of the platforms use the
name 'state' whereas the other half used 'crtc_state').
While we're touching these variables, let's also be more consistent
about always naming the intel_crtc_state's "crtc_state" rather than
"state" so that different platform types aren't using different naming
conventions.
v2:
- s/state/crtc_state/ for consistency between platform types (Ville)
- Drop the crtc parameter to intel_color_check(); we can just pull that
out of the state object.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210215415.19854-2-matthew.d.roper@intel.com
Try to be more consistent about intel_* types rather than drm_* types
for lower-level driver functions.
v2:
- Also drop the intel_crtc parameter from compute_intermediate_wm()
since we can just extract it from the crtc_state parameter. (Ville)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210215415.19854-1-matthew.d.roper@intel.com
This patch implements the functionality for getting PIPE configuration
to which DSI encoder is connected. Use the same method to get port clock
like other DDI encoders. Used during the atomic modeset.
v2 by Jani:
- Squash Madhav's and Vandita's get config bits together
- Move cnl_calc_wrpll_link() to intel_drv.h
- Drop extra temp variables
- Use enc_to_intel_dsi() instead of open coding
Co-developed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f21fa4258068d04582f2bf30735e5536a8043bdf.1543500286.git.jani.nikula@intel.com
Unclutter the haswell_crtc_enable() and haswell_crtc_disable() functions
a bit by moving the pll to port mapping and unmapping functions to the
ddi encoder hooks. This allows removal of a bunch of boilerplate code
from the functions.
Additionally, the ICL DSI encoder needs to do the clock gating and
ungating slightly differently, and this allows its own handling in a
clean fashion.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f8e2982ceea4c05dc254a0c15e2b3be1d5f271d3.1543500285.git.jani.nikula@intel.com
For DP 1.4 and above, Display Stream compression can be
enabled only if Forward Error Correctin can be performed.
Add a crtc state for FEC. Currently, the state
is determined by platform, DP and DSC being
enabled. Moving forward we can use the state
to have error correction on other scenarios too
if needed.
v2:
- Control compression_enable with the fec_enable
parameter in crtc state and with intel_dp_supports_fec()
(Ville)
- intel_dp_can_fec()/intel_dp_supports_fec()(manasi)
v3: Check for FEC support along with setting crtc state.
v4: add checks to intel_dp_source_supports_dsc.(manasi)
- Move intel_dp_supports_fec() closer to
intel_dp_supports_dsc() (Anusha)
v5: Move fec check to intel_dp_supports_dsc(Ville)
v6: Remove warning. rebase.
v7: change crtc state to include DP sink and fec capability
of source.(Manasi)
v8: Set fec_enable in crtc in intel_dp_compute_config().
v9 (From Manasi):
* Combine the !edp and !fec_support check
* Derive dev_priv from intel_dp directly
v10 (From Manasi):
* Rebase
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.comk>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-14-manasi.d.navare@intel.com
A separate power well 2 (PG2) is required for VDSC on eDP transcoder
whereas all other transcoders use the power wells associated with the
transcoders for VDSC.
This patch adds a helper to obtain correct power domain depending on
transcoder being used and enables/disables the power wells during
VDSC enabling/disabling.
v4:
* Get VDSC power domain only if compression en is set
in crtc_state (Ville, Imre)
v3:
* Call it intel_dsc_power_domain, add to
intel_ddi_get_power_domains (Ville)
v2:
* Fix tabs, const crtc_state, fix comments (Ville)
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-13-manasi.d.navare@intel.com
This patch enables decompression support in sink device
before link training and disables the same during the
DDI disabling.
v3 (From manasi):
* Pass bool state to enable/disable (Ville)
v2:(From Manasi)
* Change the enable/disable function to take crtc_state
instead of intel_dp as an argument (Manasi)
* Use the compression_enable flag as part of crtc_state (Manasi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-6-manasi.d.navare@intel.com
This patches does the following:
1. This patch defines all the DSC parameters as per the VESA
DSC specification. These are stored in the encoder and used
to compute the PPS parameters to be sent to the Sink.
2. Compute all the DSC parameters which are derived from DSC
state of intel_crtc_state.
3. Compute all parameters that are VESA DSC specific
This computation happens in the atomic check phase during
compute_config() to validate if display stream compression
can be enabled for the requested mode.
v8 (From Manasi):
* DEBUG_KMS instead of DRM_ERROR for user triggerable
errors (Ville)
v7: (From Manasi)
* Dont use signed int for rc_range_params (Manasi)
* Mask the range_bpg_offset to use only 6 bits
* Add SPDX identifier (Chris Wilson)
v6 (From Manasi):
* Add a check for line_buf_depth return value (Anusha)
* Remove DRM DSC constants to different patch (Manasi)
v5 (From Manasi):
* Add logic to limit the max line buf depth for DSC 1.1 to 13
as per DSC 1.1 spec
* Fix dim checkpatch warnings/checks
v4 (From Gaurav):
* Rebase on latest drm tip
* rename variable name(Manasi)
* Populate linebuf_depth variable(Manasi)
v3 (From Gaurav):
* Rebase my previous patches on top of Manasi's latest patch
series
* Using >>n rather than /2^n (Manasi)
* Change the commit message to explain what the patch is doing(Gaurav)
Fixed review comments from Ville:
* Don't use macro TWOS_COMPLEMENT
* Mention in comment about the source of RC params
* Return directly from case statements
* Using single asssignment for assigning rc_range_params
* Using <<n rather than *2^n and removing the comments
about the fixed point numbers
v2 (From Manasi):
* Update logic for minor version to consider the dpcd value
and what supported by the HW platform
* Use DRM DSC config struct instead of intel_dp struct
* Move the DSC constants to DRM DSC header file
* Use u16, u8 where bigger data types not needed
* * Compute the DSC parameters as part of DSC compute config
since the computation can fail (Manasi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Co-developed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
Basic DSC parameters and DSC configuration data needs to be computed
for each of the requested mode during atomic check. This is
required since for certain modes, valid DSC parameters and config
data might not be computed in which case compression cannot be
enabled for that mode.
For that reason we need to add these params and config structure
to the intel_crtc_state so that if valid this state information
can directly be used while enabling DSC in atomic commit.
v2:
* Rebase on drm-tip (Manasi)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-1-manasi.d.navare@intel.com
skl+ can go belly up if there are overlapping ddb allocations between
planes. If we could absolutely guarantee that we can perform the atomic
update within a single frame we shouldn't have to worry about this. But
we can't rely on that so let's steal the ddb overlap check trick from
skl_update_crtcs() and apply it to the plane updates. Since each step
of the sequence is free from ddb overlaps we don't have to worry about
a vblank sneaking up on us in the middle of the sequence. The partial
state that gets latched by the hardware will be safe. And unlike
skl_update_crtcs() we don't have to intoduce any extra vblank waits
on account of only having to worry about a single pipe.
v2: Fix typo in commit msg (Matt)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114210729.16185-12-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On SKL+ the plane WM/BUF_CFG registers are a proper part of each
plane's register set. That means accessing them will cancel any
pending plane update, and we would need a PLANE_SURF register write
to arm the wm/ddb change as well.
To avoid all the problems with that let's just move the wm/ddb
programming into the plane update/disable hooks. Now all plane
registers get written in one (hopefully atomic) operation.
To make that feasible we'll move the plane ddb tracking into
the crtc state. Watermarks were already tracked there.
v2: Rebase due to input CSC
v3: Split out a bunch of junk (Matt)
v4: Add skl_wm_add_affected_planes() to deal with
cursor special case and non-zero wm register reset value
v5: Drop the unrelated for_each_intel_plane_mask() fix (Matt)
Remove the redundant ddb memset() (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v3
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127165900.31298-1-ville.syrjala@linux.intel.com
We're going to need access to the new crtc state in ->disable_plane()
for SKL+ wm/ddb programming and pre-skl pipe gamma/csc control. Pass
the crtc state down.
We'll also try to make intel_crtc_disable_planes() do the right
thing as much as it's possible. The fact that we don't have a
separate crtc state for the disabled state when we're going to
re-enable the crtc later means we might end up poking at a few
extra planes in there. But that's harmless. I suppose one might
argue that we wouldn't have to care about proper ddb/wm/csc/gamma
if the pipe is going to permanently disable anyway, but the state
checker probably cares so we should try our best to make sure
everything is programmed correctly even in that case.
v2: Fix the commit message a bit (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114210729.16185-5-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Keep track which planes need updating during the commit. For now
we set the bit for any plane that was or will be visible (including
icl+ nv12 slave planes). In the future I'll have need to update
invisible planes as well, for skl plane ddbs and for pre-skl pipe
gamma/csc control (which lives in the primary plane control register).
v2: Pimp the commit message to mention icl+ nv12 slave planes (Matt)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127163742.30215-1-ville.syrjala@linux.intel.com
When a PSR error happens sink sets the PSR error register and also
set the link status to a error status.
So in the short pulse handling it was returning earlier and doing a
full detection and attempting to retrain but it fails as PSR HW is
in change of the main-link.
Just call intel_psr_short_pulse() before
intel_dp_needs_link_retrain() is not the right fix as
intel_dp_needs_link_retrain() would return true and trigger a full
detection while PSR HW is still in change of main-link.
Check for PSR active is also not safe as it could be inactive due a
frontbuffer invalidate and still doing the PSR exit sequence.
v3: added comment in intel_dp_needs_link_retrain()
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-2-jose.souza@intel.com
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Use intel_plane_destroy_state in intel_plane_free to free the state.
Also fix intel_plane_alloc() to use __drm_atomic_helper_plane_reset(),
to get sane defaults from the atomic core.
This is needed to get the correct alpha value and blend mode from the
core, and any new default values added from new properties.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
[mlankhorst: Update commit description to mention alpha blend support]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113092804.13304-1-maarten.lankhorst@linux.intel.com
To get the initial phase correct we need to account for the scale
factor as well. I forgot this initially and was mostly looking at
heavily upscaled content where the minor difference between -0.5
and the proper initial phase was not readily apparent.
And let's toss in a comment that tries to explain the formula
a little bit.
v2: The initial phase upper limit is 1.5, not 24.0!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 0a59952b24 ("drm/i915: Configure SKL+ scaler initial phase correctly")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com
Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Jani Nikula