Using device to register reset controller is a better implementation in
current drivers. Howerver, some clock drviers of MediaTek only provide
device_node.
Therefore, we still remain the register reset function with device_node
and add a new function with device to register reset controller.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-11-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The bank offsets are not serial for all reset registers.
For example, there are five infra reset banks for MT8192: 0x120, 0x130,
0x140, 0x150 and 0x730.
To support this,
- Change reg_ofs to rst_bank_ofs which is a pointer to base offsets of
the reset register.
- Add a new define RST_NR_PER_BANK to define reset number for each
reset bank.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-8-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
To declare the reset data easier, we add a strucure to do this instead
of using many input variables to mtk_register_reset_controller().
- Add mtk_clk_rst_desc to define the reset description when registering
the reset controller.
- Rename "mtk_reset" to "mtk_clk_rst_data". We use it to store data of
reset controller.
- Document mtk_clk_rst_desc and mtk_clk_rst_data.
- Modify the documentation of mtk_register_reset_controller.
- Extract container_of in update functions to to_mtk_clk_rst_data().
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-7-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are two versions for clock reset register control for MediaTek
SoCs. The old hardware is one bit per reset control, and does not
have separate registers for bit set, clear and read-back operations.
This matches the scheme supported by the simple reset driver.
However, because we need to use different data structure from
reset_simple_data, we can not use the operation of simple reset
driver.
For this reason, we keep the original functions and name this version
as "MTK_RST_SIMPLE".
In this patch:
- Add a version enumeration to separate different reset hardware.
- Merge the reset register function of simple and set_clr into one
function "mtk_register_reset_controller".
- Rename input variable "num_regs" to "rst_bank_nr" to avoid
confusion. This variable is used to define the quantity of reset bank.
- Document mtk_reset_version and mtk_register_reset_controller.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-6-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As part of the effort to improve the MediaTek clk drivers, the next step
is to switch from the old 'struct clk' clk prodivder APIs to the new
'struct clk_hw' ones.
Instead of adding new APIs to the MediaTek clk driver library mirroring
the existing ones, moving all drivers to the new APIs, and then removing
the old ones, just migrate everything at the same time. This involves
replacing 'struct clk' with 'struct clk_hw', and 'struct clk_onecell_data'
with 'struct clk_hw_onecell_data', and fixing up all usages.
For now, the clk_register() and co. usage is retained, with __clk_get_hw()
and (struct clk_hw *)->clk used to bridge the difference between the APIs.
These will be replaced in subsequent patches.
Fix up mtk_{alloc,free}_clk_data to use 'struct clk_hw' by hand. Fix up
all other affected call sites with the following coccinelle script.
// Replace type
@@
@@
- struct clk_onecell_data
+ struct clk_hw_onecell_data
// Replace of_clk_add_provider() & of_clk_src_simple_get()
@@
expression NP, DATA;
symbol of_clk_src_onecell_get;
@@
- of_clk_add_provider(
+ of_clk_add_hw_provider(
NP,
- of_clk_src_onecell_get,
+ of_clk_hw_onecell_get,
DATA
)
// Fix register/unregister
@@
identifier CD;
expression E;
identifier fn =~ "unregister";
@@
fn(...,
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
// Fix calls to clk_prepare_enable()
@@
identifier CD;
expression E;
@@
clk_prepare_enable(
- CD->clks[E]
+ CD->hws[E]->clk
);
// Fix pointer assignment
@@
identifier CD;
identifier CLK;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
=
(
- CLK
+ __clk_get_hw(CLK)
|
ERR_PTR(...)
)
;
// Fix pointer usage
@@
identifier CD;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
// Fix mtk_clk_pll_get_base()
@@
symbol clk, hw, data;
@@
mtk_clk_pll_get_base(
- struct clk *clk,
+ struct clk_hw *hw,
const struct mtk_pll_data *data
) {
- struct clk_hw *hw = __clk_get_hw(clk);
...
}
// Fix mtk_clk_pll_get_base() usage
@@
identifier CD;
expression E;
@@
mtk_clk_pll_get_base(
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220519071610.423372-4-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rex-BC Chen