[ Upstream commit 2fe29fe945637b9834c5569fbb1c9d4f881d8263 ]
On a system with Perl 5.12.1, commit 5ef6dc08cfde
("lib/build_OID_registry: don't mention the full path of the script in
output") causes the build to fail with the error below.
Bareword found where operator expected at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
syntax error at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
Execution of ./lib/build_OID_registry aborted due to compilation errors.
make[3]: *** [lib/Makefile:352: lib/oid_registry_data.c] Error 255
Ahmad Fatoum analyzed that non-destructive substitution is only supported since
Perl 5.13.2. Instead of dropping `r` and having the side effect of modifying
`$0`, introduce a dedicated variable to support older Perl versions.
Link: https://lkml.kernel.org/r/20240702223512.8329-2-pmenzel@molgen.mpg.de
Link: https://lkml.kernel.org/r/20240701155802.75152-1-pmenzel@molgen.mpg.de
Fixes: 5ef6dc08cfde ("lib/build_OID_registry: don't mention the full path of the script in output")
Link: https://lore.kernel.org/all/259f7a87-2692-480e-9073-1c1c35b52f67@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 905415ff3ffb1d7e5afa62bacabd79776bd24606 ]
Harden build ID parsing logic, adding explicit READ_ONCE() where it's
important to have a consistent value read and validated just once.
Also, as pointed out by Andi Kleen, we need to make sure that entire ELF
note is within a page bounds, so move the overflow check up and add an
extra note_size boundaries validation.
Fixes tag below points to the code that moved this code into
lib/buildid.c, and then subsequently was used in perf subsystem, making
this code exposed to perf_event_open() users in v5.12+.
Cc: stable@vger.kernel.org
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Fixes: bd7525dacd ("bpf: Move stack_map_get_build_id into lib")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961a2851324561caed579764ffbee3db82b32829 ]
Neither ELF spec not ELF loader require program header to be placed right
after ELF header, but build-id code very much assumes such placement:
See
find_get_page(vma->vm_file->f_mapping, 0);
line and checks against PAGE_SIZE.
Returns errors for now until someone rewrites build-id parser
to be more inline with load_elf_binary().
Link: https://lkml.kernel.org/r/d58bc281-6ca7-467a-9a64-40fa214bd63e@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 905415ff3ffb ("lib/buildid: harden build ID parsing logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6758c1128ceb45d1a35298912b974eb4895b7dd9 upstream.
Instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+12.5%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
Link: https://lkml.kernel.org/r/20240415171857.19244-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Closes: https://lore.kernel.org/linux-mm/A5A976CB-DB57-4513-A700-656580488AB6@flyingcircus.io/
[ kasong@tencent.com: minor adjustment of variable declarations ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4864671ca0bf51c8e78242951741df52c06766f upstream.
It can be used after xas_load to check the order of loaded entries.
Compared to xa_get_order, it saves an XA_STATE and avoid a rewalk.
Added new test for xas_get_order, to make the test work, we have to export
xas_get_order with EXPORT_SYMBOL_GPL.
Also fix a sparse warning by checking the slot value with xa_entry instead
of accessing it directly, as suggested by Matthew Wilcox.
[kasong@tencent.com: simplify comment, sparse warning fix, per Matthew Wilcox]
Link: https://lkml.kernel.org/r/20240416071722.45997-4-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6758c1128ceb ("mm/filemap: optimize filemap folio adding")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 684d28feb8546d1e9597aa363c3bfcf52fe250b7 upstream.
fill_pool() uses 'obj_pool_min_free' to decide whether objects should be
handed back to the kmem cache. But 'obj_pool_min_free' records the lowest
historical value of the number of objects in the object pool and not the
minimum number of objects which should be kept in the pool.
Use 'debug_objects_pool_min_level' instead, which holds the minimum number
which was scaled to the number of CPUs at boot time.
[ tglx: Massage change log ]
Fixes: d26bf5056f ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()")
Fixes: 36c4ead6f6 ("debugobjects: Add global free list and the counter")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65f666c6203600053478ce8e34a1db269a8701c9 ]
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3f7 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ee96abef214550d9e92f5143ee3ac1fd1323e67 ]
In 2018, a dependency on <linux/crc32poly.h> was added to avoid
duplicating the same constant in multiple files. Two months later it was
found to be a bad idea and the definition of CRC32_POLY_LE macro was moved
into xz_private.h to avoid including <linux/crc32poly.h>.
xz_private.h is a wrong place for it too. Revert back to the upstream
version which has the poly in xz_crc32_init() in xz_crc32.c.
Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org
Fixes: faa16bc404 ("lib: Use existing define with polynomial")
Fixes: 242cdad873 ("lib/xz: Put CRC32_POLY_LE in xz_private.h")
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ]
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ecea9ae4d3127a09fb5dfcea87f248937a39ff5 ]
sched_numa_find_nth_cpu() doesn't handle NUMA_NO_NODE properly, and
may crash kernel if passed with it. On the other hand, the only user
of sched_numa_find_nth_cpu() has to check NUMA_NO_NODE case explicitly.
It would be easier for users if this logic will get moved into
sched_numa_find_nth_cpu().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-6-yury.norov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream.
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef6dc08cfde240b8c748733759185646e654570 upstream.
This change strips the full path of the script generating
lib/oid_registry_data.c to just lib/build_OID_registry. The motivation
for this change is Yocto emitting a build warning
File /usr/src/debug/linux-lxatac/6.7-r0/lib/oid_registry_data.c in package linux-lxatac-src contains reference to TMPDIR [buildpaths]
So this change brings us one step closer to make the build result
reproducible independent of the build path.
Link: https://lkml.kernel.org/r/20240313211957.884561-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd6e9894b451e7c85cceb8e9dc5432679a70e7dc upstream.
zap_modalias_env() wrongly calculates size of memory block to move, so
will cause OOB memory access issue if variable MODALIAS is not the last
one within its @env parameter, fixed by correcting size to memmove.
Fixes: 9b3fa47d4a ("kobject: fix suppressing modalias in uevents delivered over netlink")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Lk Sii <lk_sii@163.com>
Link: https://lore.kernel.org/r/1717074877-11352-1-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf6acd5d16057d7accbbb1bf7dc6d8c56eeb4ecc upstream.
The decompression code parses a huffman tree and counts the number of
symbols for a given bit length. In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow.
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.
Since the maximum number of symbols is 258, use unsigned short instead.
Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com
Fixes: bc22c17e12 ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72d04bdcf3f7d7e07d82f9757946f68802a7270a ]
Configuration for sbq:
depth=64, wake_batch=6, shift=6, map_nr=1
1. There are 64 requests in progress:
map->word = 0xFFFFFFFFFFFFFFFF
2. After all the 64 requests complete, and no more requests come:
map->word = 0xFFFFFFFFFFFFFFFF, map->cleared = 0xFFFFFFFFFFFFFFFF
3. Now two tasks try to allocate requests:
T1: T2:
__blk_mq_get_tag .
__sbitmap_queue_get .
sbitmap_get .
sbitmap_find_bit .
sbitmap_find_bit_in_word .
__sbitmap_get_word -> nr=-1 __blk_mq_get_tag
sbitmap_deferred_clear __sbitmap_queue_get
/* map->cleared=0xFFFFFFFFFFFFFFFF */ sbitmap_find_bit
if (!READ_ONCE(map->cleared)) sbitmap_find_bit_in_word
return false; __sbitmap_get_word -> nr=-1
mask = xchg(&map->cleared, 0) sbitmap_deferred_clear
atomic_long_andnot() /* map->cleared=0 */
if (!(map->cleared))
return false;
/*
* map->cleared is cleared by T1
* T2 fail to acquire the tag
*/
4. T2 is the sole tag waiter. When T1 puts the tag, T2 cannot be woken
up due to the wake_batch being set at 6. If no more requests come, T1
will wait here indefinitely.
This patch achieves two purposes:
1. Check on ->cleared and update on both ->cleared and ->word need to
be done atomically, and using spinlock could be the simplest solution.
2. Add extra check in sbitmap_deferred_clear(), to identify whether
->word has free bits.
Fixes: ea86ea2cdc ("sbitmap: ammortize cost of clearing bits")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240716082644.659566-1-yang.yang@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad0d7e0f4b68f87a98ea2b239123b7d865df86b ]
In __sbitmap_queue_get_batch(), map->word is read several times, and
update atomically using atomic_long_try_cmpxchg(). But the first two read
of map->word is not protected.
This patch moves the statement val = READ_ONCE(map->word) forward,
eliminating unprotected accesses to map->word within the function.
It is aimed at reducing the number of benign races reported by KCSAN in
order to focus future debugging effort on harmful races.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_0B517C25E519D3D002194E8445E86C04AD0A@qq.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 72d04bdcf3f7 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97d833ceb27dc19f8777d63f90be4a27b5daeedf ]
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
Fixes: 9069a3817d ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a3a89fffcdf09702b1f161b914e52abca1894d ]
The library supports aggregation of objects into other objects only if
the parent object does not have a parent itself. That is, nesting is not
supported.
Aggregation happens in two cases: Without and with hints, where hints
are a pre-computed recommendation on how to aggregate the provided
objects.
Nesting is not possible in the first case due to a check that prevents
it, but in the second case there is no check because the assumption is
that nesting cannot happen when creating objects based on hints. The
violation of this assumption leads to various warnings and eventually to
a general protection fault [1].
Before fixing the root cause, error out when nesting happens and warn.
[1]
general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 9069a3817d ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d272dd1b3430bb31fa30042490fa081512424e4 ]
Hardcoding the number of CPUs at compile time does improve code
generation, but if you get it wrong the result will be confusion.
We already limited this earlier to only "experts" (see commit
fe5759d5bf "cpumask: limit visibility of FORCE_NR_CPUS"), but with
distro kernel configs often having EXPERT enabled, that turns out to not
be much of a limit.
To quote the philosophers at Disney: "Everyone can be an expert. And
when everyone's an expert, no one will be".
There's a runtime warning if you then set nr_cpus to anything but the
forced number, but apparently that can be ignored too [1] and by then
it's pretty much too late anyway.
If we had some real way to limit this to "embedded only", maybe it would
be worth it, but let's see if anybody even notices that the option is
gone. We need to simplify kernel configuration anyway.
Link: https://lore.kernel.org/all/20240618105036.208a8860@rorschach.local.home/ [1]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2af060d1c18beaec56351cf9c9bcbbc5af341a3 ]
The kcalloc() in dmirror_device_evict_chunk() will return null if the
physical memory has run out. As a result, if src_pfns or dst_pfns is
dereferenced, the null pointer dereference bug will happen.
Moreover, the device is going away. If the kcalloc() fails, the pages
mapping a chunk could not be evicted. So add a __GFP_NOFAIL flag in
kcalloc().
Finally, as there is no need to have physically contiguous memory, Switch
kcalloc() to kvcalloc() in order to avoid failing allocations.
Link: https://lkml.kernel.org/r/20240312005905.9939-1-duoming@zju.edu.cn
Fixes: b2ef9f5a5c ("mm/hmm/test: add selftest driver for HMM")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8aa1b98ce40184521ed95ec26cc115a255183b2 ]
There is a race condition when a kthread finishes after the deadline and
before the call to kthread_stop(), which may lead to use after free.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: adf5054570 ("kunit: fix UAF when run kfence test case test_gfpzero")
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20240408074625.65017-3-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1080c667b3b2c8c38a7fa83ca5567124887abae ]
Two failure patterns are seen randomly when running slub_kunit tests with
CONFIG_SLAB_FREELIST_RANDOM and CONFIG_SLAB_FREELIST_HARDENED enabled.
Pattern 1:
# test_clobber_zone: pass:1 fail:0 skip:0 total:1
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:84
Expected 2 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, test_next_pointer() overwrites p[s->offset], but the data
at p[s->offset] is already 0x12.
Pattern 2:
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 2 (0x2)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, p[s->offset] has a value other than 0x12, but one of the
expected failures is nevertheless missing.
Invert data instead of writing a fixed value to corrupt the cache data
structures to fix the problem.
Fixes: 1f9f78b1b3 ("mm/slub, kunit: add a KUnit test for SLUB debugging functionality")
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
CC: Daniel Latypov <dlatypov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 00e7d3bea2ce7dac7bee1cf501fb071fd0ea8f6c upstream.
Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead.
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 955a923d2809803980ff574270f81510112be9cf upstream.
Currently the code calls mas_start() followed by mas_data_end() if the
maple state is MA_START, but mas_start() may return with the maple state
node == NULL. This will lead to a null pointer dereference when checking
information in the NULL node, which is done in mas_data_end().
Avoid setting the offset if there is no node by waiting until after the
maple state is checked for an empty or single entry state.
A user could trigger the events to cause a kernel oops by unmapping all
vmas to produce an empty maple tree, then mapping a vma that would cause
the scenario described above.
Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Tested-by: Marius Fleischer <fleischermarius@gmail.com>
Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a30653b604aaad1bf0f2e74b068ceb8b6fc7aea ]
Fix extract_user_to_sg() so that it will break out of the loop if
iov_iter_extract_pages() returns 0 rather than looping around forever.
[Note that I've included two fixes lines as the function got moved to a
different file and renamed]
Fixes: 85dd2c8ff3 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator")
Fixes: f5f82cd187 ("Move netfs_extract_iter_to_sg() to lib/scatterlist.c")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: netfs@lists.linux.dev
Link: https://lore.kernel.org/r/1967121.1714034372@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 229087f6f1dc2d0c38feba805770f28529980ec0 ]
Turns out that due to CONFIG_DEBUG_INFO_BTF_MODULES not having an
explicitly specified "menu item name" in Kconfig, it's basically
impossible to turn it off (see [0]).
This patch fixes the issue by defining menu name for
CONFIG_DEBUG_INFO_BTF_MODULES, which makes it actually adjustable
and independent of CONFIG_DEBUG_INFO_BTF, in the sense that one can
have DEBUG_INFO_BTF=y and DEBUG_INFO_BTF_MODULES=n.
We still keep it as defaulting to Y, of course.
Fixes: 5f9ae91f7c ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAK3+h2xiFfzQ9UXf56nrRRP=p1+iUxGoEP5B+aq9MDT5jLXDSg@mail.gmail.com [0]
Link: https://lore.kernel.org/bpf/20240404220344.3879270-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd37721803c6e73619108f76ad2e12a9aa5fafaf ]
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b6976f323a86 ("drm/ttm: stop pooling cached NUMA pages v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7626913652cc786c238e2dd7d8740b17d41b2637 ]
The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(),
which means MMIO mappings are leaked.
Move the guard so we call iounmap() for MMIO mappings.
Fixes: 316e8d79a0 ("pci_iounmap'2: Electric Boogaloo: try to make sense of it all")
Link: https://lore.kernel.org/r/20240131090023.12331-2-pstanner@redhat.com
Reported-by: Danilo Krummrich <dakr@redhat.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Sasha Levin <sashal@kernel.org>
Upstream: no
It would be useful to see what the sched_ext scheduler state is, and what
scheduler is running, when we're dumping a task's stack. This patch
therefore adds a new print_scx_info() function that's called in the same
context as print_worker_info() and print_stop_info(). An example dump
follows.
BUG: kernel NULL pointer dereference, address: 0000000000000999
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 13 PID: 2047 Comm: insmod Tainted: G O 6.6.0-work-10323-gb58d4cae8e99-dirty #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 2/2/2022
Sched_ext: qmap (enabled+all), task: runnable_at=-17ms
RIP: 0010:init_module+0x9/0x1000 [test_module]
...
v2: We are now using scx_ops_enable_state_str[] outside CONFIG_SCHED_DEBUG.
Move it outside of CONFIG_SCHED_DEBUG and to the top. This was reported
by Changwoo and Andrea.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Hongbo Li <herberthbli@tencent.com>
Reported-by: Changwoo Min <changwoo@igalia.com>
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Upstream commit 843a8851e89e2e85db04caaf88d8554818319047 ]
lib/test_blackhole_dev.c sets a variable that is never read, causing
this following building warning:
lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable]
Remove the variable struct ethhdr *ethh, which is unused.
Fixes: 509e56b37c ("blackhole_dev: add a selftest")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jianping Liu