It should be impossible for these tests not to run due to an empty
ppgtt, but if it should happen, let's report ENODEV (our typical
internal error for impossible events).
In file included from drivers/gpu/drm/i915/i915_gem.c:5415:
drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_mock_ppgtt_huge_fill':
>> drivers/gpu/drm/i915/selftests/huge_pages.c:612: error: 'err' may be used uninitialized in this function
drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_ppgtt_exhaust_huge':
drivers/gpu/drm/i915/selftests/huge_pages.c:1159: error: 'err' may be used uninitialized in this function
Reported-by: kbuild-all@01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017103723.6933-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
When pwriting into shmemfs, the fast path pagecache_write does not
notice when it is writing to beyond the end of the truncated shmemfs
inode. Report -EFAULT directly when we try to use pwrite into the
!I915_MADV_WILLNEED object.
Fixes: 7c55e2c577 ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl")
Testcase: igt/gem_madvise/dontneed-before-pwrite
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk
Now that the infoframe hooks are part of the intel_dig_port, we can use
the normal .write_infoframe() hook to update the VSC SDP. We do need to
deal with the size difference between the VSC DIP and the others though.
Another minor snag is that the compiler will complain to use if we keep
using enum hdmi_infoframe_type type and passing in the DP define instead,
so et's just change to unsigned int all over for the inforframe type.
v2: Rebase due to other PSR changes
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013194051.19286-1-ville.syrjala@linux.intel.com
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not
on in a global CTRL1 as it was on SKL.
The original patch addressed this difference, but leaving behind
this single entry here. So we were checking the wrong bits during
the PLL initialization and consequently avoiding the CFGCR1 setup
during HDMI initialization. Luckly when only HDMI was in use BIOS
had already setup this for us. But the dual display with hot plug
were messed up.
Fixes: a927c927de ("drm/i915/cnl: Initialize PLLs")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on
the clock for the DDI and map the DPLL to the DDI"
So we first do the map and then we unset DDI_CLK_OFF to turn the clock
on. We do this in 2 separated steps.
However, on this second step where we should only unset the off bit we are
also unmapping the ddi from the pll. So we end up using the pll 0
for almost everything. Consequently breaking cases with more than one
display.
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com
In the intel_engine_cs dumper, we were showing the request details for
the request queue but not of those requests already passed to the hw
(just a summary of the seqno). If we show those details, we can then
eliminate the entirely redundant and forgotten debugfs/i915_gem_request
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015204310.17045-1-chris@chris-wilson.co.uk
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
If we fail to recover the HW state upon resume (i.e. our attempt to
clear the wedged bit and reset during i915_gem_sanitize() fails), then
skip the HW restart inside i915_gem_init_hw(). We will ultimately do the
HW restart when successfully unwedging and resetting the HW later,
but attempting to restore a wedged device upon resume is risky as the HW
is in an unknown state.
v2: Suppress the error message when detecting the already wedged HW.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103240
Testcase: igt/gem_eio/in-flight-suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015143725.27764-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
We free objects in bulk after they wait for their RCU grace period.
Currently, we take struct_mutex and unbind all the objects. This can lead
to a long lock duration during which time those objects have their pages
unfreeable (i.e. the shrinker is prevented from reaping those pages). If
we only process a single object under the struct_mutex and then free the
pages, the number of objects locked away from the shrinker is minimal
and we allow regular clients better access to struct_mutex if they need
it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-9-chris@chris-wilson.co.uk
Inspired by Tvrtko's critique of the reaping of the stale contexts
before allocating a new one, also limit the freed object reaping to the
oldest stale object before allocating a fresh object. Unlike contexts,
objects may have radically different sizes of backing storage, but
similar to contexts, while we want to prevent starvation due to
excessive freed lists, we also do not want to delay fresh allocations
for too long. Only freeing the oldest on the freed object list before
each allocation is a reasonable compromise.
v2: Only a single consumer of llist_del_first() is allowed (although
multiple llist_add are still allowed in parallel). Unlike
i915_gem_context, i915_gem_flush_free_objects() is itself not serialized
and so we need to add our own spinlock. Otherwise KASAN eventually spots
a use-after-free for the race on *first->next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-8-chris@chris-wilson.co.uk
Prefer to defer activating our GEM shrinker until we have a few
megabytes to free; or we have accumulated sufficient mempressure by
deferring the reclaim to force a shrink. The intent is that because our
objects may typically be large, we are too effective at shrinking and
are not rewarded for freeing more pages than the batch. It will also
defer the initial shrinking to hopefully put it at a lower priority than
say the buffer cache (although it will balance out over a number of
reclaims, with GEM being more bursty).
v2: Give it a feedback system to try and tune the batch size towards
an effective size for the available objects.
v3: Start keeping track of shrinker stats in debugfs
v4: Protect against finding no shrinkable objects (div-by-zero)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-7-chris@chris-wilson.co.uk
shrink_slab() allows us to report back the number of objects we
successfully scanned (out of the target shrinkctl->nr_to_scan). As
report the number of pages owned by each GEM object as a separate item
to the shrinker, we cannot precisely control the number of shrinker
objects we scan on each pass; and indeed may free more than requested.
If we fail to tell the shrinker about the number of objects we process,
it will continue to hold a grudge against us as any objects left
unscanned are added to the next reclaim -- and so we will keep on
"unfairly" shrinking our own slab in comparison to other slabs.
v2: fixup the misplaced addition, we want to count everything we scan
(to match the number we reported earlier) not just the objects we
successfully validated and freed.
References: 912d572d63 ("drm/i915: wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-6-chris@chris-wilson.co.uk
Remove the struct_mutex requirement around dev_priv->mm.bound_list and
dev_priv->mm.unbound_list by giving it its own spinlock. This reduces
one more requirement for struct_mutex and in the process gives us
slightly more accurate unbound_list tracking, which should improve the
shrinker - but the drawback is that we drop the retirement before
counting so i915_gem_object_is_active() may be stale and lead us to
underestimate the number of objects that may be shrunk (see commit
bed50aea61 ("drm/i915/shrinker: Flush active on objects before
counting")).
v2: Crosslink the spinlock to the lists it protects, and btw this
changes s/obj->global_link/obj->mm.link/
v3: Fix decoupling of old links in i915_gem_object_attach_phys()
v3.1: Fix the fix, only unlink if it was linked
v3.2: Use a local for to_i915(obj->base.dev)->mm.obj_lock
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016114037.5556-1-chris@chris-wilson.co.uk
In the next patch, we want to reduce the lock coverage within the
shrinker, and one of the dangerous walks we have is over obj->vma_list.
We are only walking the obj->vma_list in order to check whether it has
been permanently pinned by HW access, typically via use on the scanout.
But we have a couple of other long term pins, the context objects for
which we currently have to check the individual vma pin_count. If we
instead mark these using obj->pin_display, we can forgo the dangerous
and sometimes slow list iteration.
v2: Rearrange code to try and avoid confusion from false associations
due to arrangement of whitespace along with rebasing on obj->pin_global.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-4-chris@chris-wilson.co.uk
It has now lost its meaning (it shows more than just pin_display), I do
not believe that we are using in preference to the complete listing from
i915_gem_gtt, or the listing from i915_gem_framebuffer, or the listing
of active display objects in i915_display_info.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-3-chris@chris-wilson.co.uk
In the next patch, we want to extend use of the global pin counter for
semi-permanent pinning of context/ring objects. Given that we plan to
extend the usage to encompass a disparate set of objects, we want a name
that reflects both and should entail less confusion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-2-chris@chris-wilson.co.uk
Since we occasionally stuff an error pointer into obj->mm.pages for a
semi-permanent or even permanent failure, we have to be more careful and
not just test against NULL when deciding if the object has a complete
set of its concurrent pages.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-1-chris@chris-wilson.co.uk
Apparently RC6 residency is lower than expected
with EI mode for most of the cases on CNL A0, B0 and C0.
This Wa doesn't solve our lower residency, but I
believe it is better to have it since EI is not
expected to work by HW engineers anyways.
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822235828.18322-1-rodrigo.vivi@intel.com
No functional change. Just place the function closer to related
definitions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-15-michal.wajdeczko@intel.com
In case of GuC firmware loading failure we were reporting
DRM_ERROR also for case when GuC loading was not strictly
required.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-14-michal.wajdeczko@intel.com
Firmware loading for GuC and HuC are similar. Move common code
into generic function for maximum reuse.
v2: change message levels (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-13-michal.wajdeczko@intel.com
Some of the error messages from DMC load were too generic and
may be confusing for the user. Lets explicitly add DMC words there.
Also as homepage of DMC firmware is same as for the GuC and Huc,
lets reuse URL definition.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-12-michal.wajdeczko@intel.com
In case of firmware fetch failure we should help user
find latest firmware. URL macro duplication from csr.c
will be fixed in upcoming patch.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-11-michal.wajdeczko@intel.com
Time to remove less important info and make messages clear
and consistent.
v2: change some message levels (Chris)
v3: restore DRM_WARN (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #2
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-10-michal.wajdeczko@intel.com
GuC status message printed right after firmware upload may be too
optimistic, as we may fail on subsequent steps. Move that message
to the end of intel_uc_init_hw where we know the status for sure.
v2: use dev_info (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-9-michal.wajdeczko@intel.com
Both GuC and HuC firmwares will be moved into WOPCM so
we can check ucode size early for both cases.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-8-michal.wajdeczko@intel.com
Functions should be defined in their use order.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-7-michal.wajdeczko@intel.com
Remaining functions in intel_guc_loader.c were focused around
GuC firmware. Rename them to match object-verb pattern and
rename file itself.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-6-michal.wajdeczko@intel.com
After GuC code reorg some documentation was left in wrong
place. Move it closer to corresponding definitions.
v2: use consistent name for the GuC (Sagar)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-5-michal.wajdeczko@intel.com
Existing code needs some style fixes. To avoid polluting
pure move patch, do it now as separate step.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-4-michal.wajdeczko@intel.com
Function intel_guc_wopcm_size didn't fit well in the old place.
With this move upcoming cleanup will be simpler.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-2-michal.wajdeczko@intel.com
Let GVT-g VM read the CSB and CSB write pointer from virtual HWSP, not all
the host support this feature, need to check the BIT(3) of caps in PVINFO.
v3 : Remove unnecessary comments.
v4 : Separate VM enable patch with GVT-g implementation patch due to code
dependency.
v5 : Use inline for GVT virtual HWSP caps check function.
v6 : Comments refine.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508039725-1066-1-git-send-email-weinan.z.li@intel.com
The compiler warns:
drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used
Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses
hsw_ddi_translations_fdi[] for both Haswell and *Broadwell*
Fixes: 7d1c42e679 ("drm/i915: Refactor code to select the DDI buf translation table")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Before modifying the ring register (RING_START, HEAD, TAIL, CTL) we
first make sure it is stopped (or else the hw may not resample the
registers). However, we do not need to let the hw restart until after we
have reprogrammed all the rings. This should help prevent situations
where pending operations on the ring may resume (because we are trying
to re-initialize following an unsuccessful GPU hang, i.e. from
i915_gem_unset_wedged).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103260
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013131218.18013-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Since the removal of the stop_machine(), it is allowed and expected for
the nop_submit_request() and nop_complete_submit_request() to run in
parallel to the i915_gem_set_wedged() processing. As such we can no
longer assert that i915_gem_set_wedged() has completed inside the
stop_machine prior to the individual nop_submit_request execution.
Fixes: af7a8ffad9 ("drm/i915: Use rcu instead of stop_machine in set_wedged")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012204019.3557-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Rather that plumb the link parameters separately to
intel_ddi_pre_enable_dp() let's just pass the entire crtc state.
intel_ddi_pre_enable_hdmi() already took the crtc state, but for some
reason intel_ddi_pre_enable() still wanted to extract has_infoframe
from therein and pass it in separately. Let's not do that since it's
pointless.
v2: Rebase due to more code getting pulled into the DDI hooks
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To untangle the mess that is intel_ddi_post_disable() move the the bits
needed by FDI into intel_ddi_fdi_post_disable(). This way we can stop
worrying about FDI in intel_ddi_post_disable().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-5-ville.syrjala@linux.intel.com
Extract the code to disable the DDI_BUF_CTL into small helper. This
will allows us to detangle the encoder type mess in
intel_ddi_post_disable().
v2: Keep using intel_ddi_get_encoder_port() for now
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-4-ville.syrjala@linux.intel.com
Pull the code to disable the port clock into a function. We already have
the intel_ddi_clk_select() counterpart.
v2: Keep using intel_ddi_get_encoder_port() for now (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To make it easier to debug things let's dump the output types bitmask in
the crtc state dump. And to make life that much better, let's pretty
print it as a a human reaadable string as well.
v2: Have the caller pass in the buffer (Chris)
#undef OUTPUT_TYPE (Jani)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Replace instances of drm_framebuffer_reference/unreference() with
*_get/put() suffixes and drm_dev_unref with *_put() suffix
because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
Done with following coccinelle semantic patch
@@
expression ex;
@@
(
-drm_framebuffer_unreference(ex);
+drm_framebuffer_put(ex);
|
-drm_dev_unref(ex);
+drm_dev_put(ex);
|
-drm_framebuffer_reference(ex);
+drm_framebuffer_get(ex);
)
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
[danvet: Drop the drm_dev_put change for now, to make the patch apply
with out a backmerge.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009120643.11953-1-harshasharmaiitr@gmail.com
Per BSpec, 400us is "BDW+ Do not use this setting." - not just PORT_A.
Set BDW to 600us unconditionally.
v2:
-Split in to two patches (Rodrigo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012213037.4245-2-james.ausmus@intel.com
Chris Wilson