Commands using a duration limit descriptor that has limit policies set to a
value other than 0x0 may be failed by the device if one of the limits are
exceeded. For such commands, since the failure is the result of the user
duration limit configuration and workload, the commands should not be
retried and terminated immediately. Furthermore, to allow the user to
differentiate these "soft" failures from hard errors due to hardware
problem, a different error code than EIO should be returned.
There are 2 cases to consider:
(1) The failure is due to a limit policy failing the command with a check
condition sense key, that is, any limit policy other than 0xD. For this
case, scsi_check_sense() is modified to detect failures with the ABORTED
COMMAND sense key and the COMMAND TIMEOUT BEFORE PROCESSING or COMMAND
TIMEOUT DURING PROCESSING or COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR
RECOVERY additional sense code. For these failures, a SUCCESS disposition
is returned so that scsi_finish_command() is called to terminate the
command.
(2) The failure is due to a limit policy set to 0xD, which result in the
command being terminated with a GOOD status, COMPLETED sense key, and DATA
CURRENTLY UNAVAILABLE additional sense code. To handle this case, the
scsi_check_sense() is modified to return a SUCCESS disposition so that
scsi_finish_command() is called to terminate the command. In addition,
scsi_decide_disposition() has to be modified to see if a command being
terminated with GOOD status has sense data. This is as defined in SCSI
Primary Commands - 6 (SPC-6), so all according to spec, even if GOOD status
commands were not checked before.
If scsi_check_sense() detects sense data representing a duration limit,
scsi_check_sense() will set the newly introduced SCSI ML byte
SCSIML_STAT_DL_TIMEOUT. This SCSI ML byte is checked in scsi_noretry_cmd(),
so that a command that failed because of a CDL timeout cannot be
retried. The SCSI ML byte is also checked in scsi_result_to_blk_status() to
complete the command request with the BLK_STS_DURATION_LIMIT status, which
result in the user seeing ETIME errors for the failed commands.
Co-developed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-12-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In SCSI, we get the sense data as part of the completion, for ATA however,
we need to fetch the sense data as an extra step. For an aborted ATA
command the sense data is fetched via libata's ->eh_strategy_handler().
For Command Duration Limits policy 0xD:
The device shall complete the command without error with the additional
sense code set to DATA CURRENTLY UNAVAILABLE.
In order to handle this policy in libata, we intend to send a successful
command via SCSI EH, and let libata's ->eh_strategy_handler() fetch the
sense data for the good command. This is similar to how we handle an
aborted ATA command, just that we need to read the Successful NCQ Commands
log instead of the NCQ Command Error log.
When we get a SATA completion with successful commands, ATA_SENSE will be
set, indicating that some commands in the completion have sense data.
The sense_valid bitmask in the Sense Data for Successful NCQ Commands log
will inform exactly which commands that had sense data, which might be a
subset of all the commands that was completed in the same completion. (Yet
all will have ATA_SENSE set, since the status is per completion.)
The successful commands that have e.g. a "DATA CURRENTLY UNAVAILABLE" sense
data will have a SCSI ML byte set, so scsi_eh_flush_done_q() will not set
the scmd->result to DID_TIME_OUT for these commands. However, the
successful commands that did not have sense data, must not get their result
marked as DID_TIME_OUT by SCSI EH.
Add a new flag SCMD_FORCE_EH_SUCCESS, which tells SCSI EH to not mark a
command as DID_TIME_OUT, even if it has scmd->result == SAM_STAT_GOOD.
This will be used by libata in a subsequent commit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-5-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for constifying most SCSI host template pointers by constifying the
SCSI host template pointer arguments and variables in the SCSI core.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are
some core changes, mostly around reworking some of our user context
assumptions in device put and moving some code around. The remaining
updates are bug fixes and minor changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY5jjrSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9iAPwN++uF
BNlCD36duS8LslKQMPAmFxWt3d/4RWAHsXj2WQEAtu9q8K9PSe1ueb4y+rAEG4oj
2AUQhR3v9ciWBBKlDog=
=JYJC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
If a host template doesn't implement the .eh_abort_handler() there is no
point in queueing the abort workqueue function; all it does is invoking
SCSI EH anyway. So return 'FAILED' from scsi_abort_command() if the
.eh_abort_handler() is not implemented and save us from having to wait for
the abort workqueue function to complete.
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
[niklas: moved the check to the top of scsi_abort_command()]
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20221206131346.2045375-1-niklas.cassel@wdc.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Earlier commits in this series allow battery-powered systems to build
their kernels with the default-disabled CONFIG_RCU_LAZY=y Kconfig option.
This Kconfig option causes call_rcu() to delay its callbacks in order
to batch them. This means that a given RCU grace period covers more
callbacks, thus reducing the number of grace periods, in turn reducing
the amount of energy consumed, which increases battery lifetime which
can be a very good thing. This is not a subtle effect: In some important
use cases, the battery lifetime is increased by more than 10%.
This CONFIG_RCU_LAZY=y option is available only for CPUs that offload
callbacks, for example, CPUs mentioned in the rcu_nocbs kernel boot
parameter passed to kernels built with CONFIG_RCU_NOCB_CPU=y.
Delaying callbacks is normally not a problem because most callbacks do
nothing but free memory. If the system is short on memory, a shrinker
will kick all currently queued lazy callbacks out of their laziness,
thus freeing their memory in short order. Similarly, the rcu_barrier()
function, which blocks until all currently queued callbacks are invoked,
will also kick lazy callbacks, thus enabling rcu_barrier() to complete
in a timely manner.
However, there are some cases where laziness is not a good option.
For example, synchronize_rcu() invokes call_rcu(), and blocks until
the newly queued callback is invoked. It would not be a good for
synchronize_rcu() to block for ten seconds, even on an idle system.
Therefore, synchronize_rcu() invokes call_rcu_hurry() instead of
call_rcu(). The arrival of a non-lazy call_rcu_hurry() callback on a
given CPU kicks any lazy callbacks that might be already queued on that
CPU. After all, if there is going to be a grace period, all callbacks
might as well get full benefit from it.
Yes, this could be done the other way around by creating a
call_rcu_lazy(), but earlier experience with this approach and
feedback at the 2022 Linux Plumbers Conference shifted the approach
to call_rcu() being lazy with call_rcu_hurry() for the few places
where laziness is inappropriate.
And another call_rcu() instance that cannot be lazy is the one in the
scsi_eh_scmd_add() function. Leaving this instance lazy results in
unacceptably slow boot times.
Therefore, make scsi_eh_scmd_add() use call_rcu_hurry() in order to
revert to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: <linux-scsi@vger.kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If a SCSI command times out and is going to be aborted, we should increase
the iodone_cnt of the related scsi_device. Otherwise the iodone_cnt would
be smaller than iorequest_cnt.
Increasing iodone_cnt in scsi_timeout() would not cause a double accounting
issue. Brief analysis follows:
- We add the iodone_cnt when BLK_EH_DONE is returned in
scsi_timeout(). The related command's timeout event would not happen.
- If the abort succeeds and the command is not retried, the command would
be completed with scsi_finish_command() which would not increase
iodone_cnt.
- If the abort succeeds and the command is retried, it would be requeue. A
scsi_dispatch_cmd() would be called and iorequest_cnt would be increased
again.
- If the abort fails, the error handler successfully recovers the device,
and the command is not retried, the command would be completed with
scsi_finish_command() which would not increase iodone_cnt.
- If the abort fails, the error handler successfully recovers the device,
and the command is retried, the iorequest_cnt would be increased again.
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221123122137.150776-2-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6600593cbd ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target); the biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so. Beyond the usual bug fixing and
security class reworks, there aren't a huge number of core changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY0B74yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishW2NAP9CPp2R
7NRmSyxcyVYvtCNUW3WxXh65Gn+KgArmg8XucgEAhUBX1fSjOzpERWEU+UaXitbE
Rb+FbjxSc5YxR+nJ/Qc=
=0Wlp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target). The biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so.
Beyond the usual bug fixing and security class reworks, there aren't a
huge number of core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
scsi: mpi3mr: Remove unnecessary cast
scsi: stex: Properly zero out the passthrough command structure
scsi: mpi3mr: Update driver version to 8.2.0.3.0
scsi: mpi3mr: Fix scheduling while atomic type bug
scsi: mpi3mr: Scan the devices during resume time
scsi: mpi3mr: Free enclosure objects during driver unload
scsi: mpi3mr: Handle 0xF003 Fault Code
scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
scsi: mpi3mr: Support new power management framework
scsi: mpi3mr: Update mpi3 header files
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
scsi: core: Add I/O timeout count for SCSI device
scsi: qedf: Populate sysfs attributes for vport
scsi: pm8001: Replace one-element array with flexible-array member
scsi: 3w-xxxx: Replace one-element array with flexible-array member
scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
...
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently struct scsi_device maintains counters for requests, completions,
and errors but is missing a counter for timeouts.
For better tracking of timeouts, add a suitable counter.
Link: https://lore.kernel.org/r/1663666339-17560-1-git-send-email-wubo40@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a driver returns:
- DID_TARGET_FAILURE
- DID_NEXUS_FAILURE
- DID_ALLOC_FAILURE
- DID_MEDIUM_ERROR
we hit a couple bugs:
1. The SCSI error handler runs because scsi_decide_disposition() has no
case statements for them and we return FAILED.
2. For SG IO the userspace app gets a success status instead of failed,
because scsi_result_to_blk_status() clears those errors.
This patch adds a new internal error code byte for use by the SCSI
midlayer. This will be used instead of the above error codes, so we don't
have to play that clearing the host code game in
scsi_result_to_blk_status() and drivers cannot accidentally use them.
A subsequent commit will then remove the internal users of the above codes
and convert us to use the new ones.
Link: https://lore.kernel.org/r/20220812010027.8251-9-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
This patch prepares for introducing the new blk_opf_t type in the SCSI core.
Since the value returned by scsi_noretry_cmd() is only used in boolean
expressions, this patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-41-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sdev_printk() will only accept messages up to 128 bytes.
Shorten strings exceeding 128 bytes avoid printing an incomplete sentence
like:
[ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.com
Suggested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCSI core code does not currently support reserved commands. As such,
requests which time-out would never be reserved, and scsi_timeout()
'reserved' arg should never be set.
Remove handling for reserved requests, drop the wrapper scsi_timeout()
as it now just calls scsi_times_out() always, and finally rename
scsi_times_out() -> scsi_timeout() to match the blk_mq_ops method name.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-2-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let the caller set it together with the end_io_data instead of passing
a pointless argument. Note the the target code did in fact already
set it and then just overrode it again by calling blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The smatch tool reported the following warning:
drivers/scsi/scsi_error.c:1988 scsi_decide_disposition() warn: ignoring
unreachable code.
Remove the "default:return FAILED;" instead of "return FAILED;" reported by
smatch, because compilers can provide more useful diagnostics about
switch/case statements that do not have a default statement, especially if
the "switch" applies to a value with enumeration type.
Link: https://lore.kernel.org/r/20220301080448.112813-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
Link: https://lore.kernel.org/r/20220228113652.970857-2-adrian.hunter@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.
Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYeCJZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfMnAQCsERG9
V4yX8LDpBjD7leIccf+6krJNNWaIWYYkEdxpzQD9FShB7/yDakFq3erW2y5mVqac
dZ065M0ckE4bxk9uMIE=
=gPHF
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits)
scsi: mpi3mr: Bump driver version to 8.0.0.61.0
scsi: mpi3mr: Fixes around reply request queues
scsi: mpi3mr: Enhanced Task Management Support Reply handling
scsi: mpi3mr: Use TM response codes from MPI3 headers
scsi: mpi3mr: Add io_uring interface support in I/O-polled mode
scsi: mpi3mr: Print cable mngnt and temp threshold events
scsi: mpi3mr: Support Prepare for Reset event
scsi: mpi3mr: Add Event acknowledgment logic
scsi: mpi3mr: Gracefully handle online FW update operation
scsi: mpi3mr: Detect async reset that occurred in firmware
scsi: mpi3mr: Add IOC reinit function
scsi: mpi3mr: Handle offline FW activation in graceful manner
scsi: mpi3mr: Code refactor of IOC init - part2
scsi: mpi3mr: Code refactor of IOC init - part1
scsi: mpi3mr: Fault IOC when internal command gets timeout
scsi: mpi3mr: Display IOC firmware package version
scsi: mpi3mr: Handle unaligned PLL in unmap cmnds
scsi: mpi3mr: Increase internal cmnds timeout to 60s
scsi: mpi3mr: Do access status validation before adding devices
scsi: mpi3mr: Add support for PCIe Managed Switch SES device
...
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now. Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some scenarios START STOP UNIT may time out. The default recovery
time of 30 seconds is relatively large. Modifying rq_timeout to adjust
the START STOP UNIT timeout value will affect the regular I/O.
Commit 9728c0814e ("[SCSI] make scsi_eh_try_stu use block timeout")
switched to rq_timeout for the START STOP UNIT command. However commit
0816c9251a ("[SCSI] Allow error handling timeout to be specified")
introduced an explicit eh_timeout parameter. It makes more sense to
use this value as the timeout for START STOP UNIT.
Link: https://lore.kernel.org/r/1636507412-21678-1-git-send-email-brookxu.cn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify the nested conditionals in the function by using a label for the
error path. Introduce local "shost" to avoid repeated "sdev->shost" usage.
Also remove scsi_eh_complete_abort() since there is now only one place it
would be called.
Link: https://lore.kernel.org/r/20211029194311.17504-3-emilne@redhat.com
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
F95pt5udsLypGhpfZlE=
=fiv8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used. If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.
The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.
Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.
Thanks to Gopinath Marappan for investigating this problem.
Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.
Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conditional statements are faster than indirect calls. Use a structure
member to track the SCSI command submitter such that later patches can call
scsi_done(scmd) instead of scmd->scsi_done(scmd).
The asymmetric behavior that scsi_send_eh_cmnd() sets the submission
context to the SCSI error handler and that it does not restore the
submission context to the SCSI core is retained.
Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since all scsi_cmnd.request users are gone, remove the request pointer
from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=gHse
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Originally the SCSI subsystem has been using 'special' SCSI status codes,
which were the SAM-specified ones but shifted by 1. As most drivers have
now been modified to use the SAM-specified ones, having two nearly
identical sets of definitions only causes confusion.
The Linux-specifed SCSI status codes have been marked obsolete for several
years so drop them and use the SAM-specified status codes throughout.
Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The message byte is now unused, so we can drop the helper to set the
message byte and the check for message bytes during error recovery.
Link: https://lore.kernel.org/r/20210427083046.31620-38-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set DID_TIME_OUT instead of DRIVER_TIMEOUT when a command
is finally marked as failed after error recovery.
Link: https://lore.kernel.org/r/20210427083046.31620-12-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper function scsi_status_is_check_condition() to encapsulate the
frequent checks for SAM_STAT_CHECK_CONDITION.
Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.
The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:
KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/
Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comment above scsi_send_eh_cmnd() says: "Returns SUCCESS or FAILED or
NEEDS_RETRY". This patch makes all values returned by scsi_send_eh_cmnd()
match the documentation of this function. This change does not affect the
behavior of scsi_eh_tur() nor of scsi_eh_try_stu() nor of the
scsi_request_sense() callers.
See also commit bbe9fb0d04 ("scsi: Avoid that .queuecommand() gets called
for a blocked SCSI device"; v5.3).
Link: https://lore.kernel.org/r/20210415220826.29438-5-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere). The
only big major rework of note is the one from Hannes trying to clean
up our result handling code in the drivers to make it consistent.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYDAdliYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTblAQCk6wD8
fcb4TItSRp0DpRzs37zhppEbrBgveuAFHhr5swEA0gL2mHcq0vnyNBinCLnERrE7
TPYJqUKJNktnjVG7ZWc=
=wW6p
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
Add a new optional routine, eh_should_retry_cmd(), in scsi_host_template
that allows the transport to decide if a cmd is retryable. Return true if
the transport is in a state the cmd should be retried on.
Update scmd_eh_abort_handler() and scsi_eh_flush_done_q() to both call
scsi_eh_should_retry_cmd() to check whether the command needs to be
retried.
The above changes were based on a patch by Mike Christie.
Link: https://lore.kernel.org/r/1609969748-17684-3-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add code in scsi_result_to_blk_status to translate a new error
DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e
BLK_STS_TRANSPORT.
Add DID_TRANSPORT_MARGINAL case to scsi_decide_disposition().
Link: https://lore.kernel.org/r/1609969748-17684-2-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel