Commit Graph

284 Commits

Author SHA1 Message Date
Dave Airlie d1583c9997 Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into drm-next
This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.

* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: init TTM dev_mapping in ttm_bo_device_init()
  drm: use anon-inode instead of relying on cdevs
  drm: add pseudo filesystem for shared inodes
2014-03-18 19:17:02 +10:00
David Herrmann 44d847b743 drm: init TTM dev_mapping in ttm_bo_device_init()
With dev->anon_inode we have a global address_space ready for operation
right from the beginning. Therefore, there is no need to do a delayed
setup with TTM. Instead, set dev_mapping during initialization in
ttm_bo_device_init() and remove any "if (dev_mapping)" conditions.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:23:42 +01:00
Rob Clark 9ef7506f7e drm/ttm: don't oops if no invalidate_caches()
A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement
this function.  Yet can end up somehow with an evicted bo:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<          (null)>]           (null)
  PGD 16e761067 PUD 16e6cf067 PMD 0
  Oops: 0010 [#1] SMP
  Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom
   sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod
  CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1
  Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009
  task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000
  RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
  RSP: 0018:ffff88016c885ad8  EFLAGS: 00010202
  RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00
  RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0
  R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30
  R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400
  FS:  00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
   ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001
   ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700
   ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400
  Call Trace:
   [<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm]
   [<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm]
   [<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm]
   [<ffffffff81130001>] ? perf_event_init_context+0x141/0x220
   [<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm]
   [<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200]
   [<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200]
   [<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0
   [<ffffffff815c4182>] ? mutex_lock+0x12/0x2f
   [<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm]
   [<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm]
   [<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm]
   [<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510
   [<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0
   [<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0
   [<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0
   [<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0
   [<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b
  Code:  Bad RIP value.
  RIP  [<          (null)>]           (null)
   RSP <ffff88016c885ad8>
  CR2: 0000000000000000

Signed-off-by: Rob Clark <rclark@redhat.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
2014-03-12 19:53:51 +01:00
Thomas Hellstrom 0e6d6ec02f drm/ttm: Work around performance regression with VM_PFNMAP
A performance regression was introduced in TTM in linux 3.13 when we started using
VM_PFNMAP for shared mappings. In theory this should've been faster due to
less page book-keeping but it appears like VM_PFNMAP + x86 PAT + write-combine
is a particularly cpu-hungry combination, as seen by largely increased
cpu-usage on r200 GL video playback.

Until we've sorted out why, revert to always use VM_MIXEDMAP.
Reference: freedesktop.org bugzilla bug #75719

Reported-and-tested-by: <smoki00790@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
2014-03-12 14:07:24 +01:00
Masanari Iida 7a444d1f0b drm/ttm: Fix memory leak in ttm_agp_backend.c
This patch fix a memory leak found by cppcheck.
[drivers/gpu/drm/ttm/ttm_agp_backend.c:129]:
(error) Memory leak: agp_be

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-02-18 14:03:32 +01:00
Thomas Hellstrom 1b76af5ce8 drm/ttm: Don't clear page metadata of imported sg pages
These page pointers shouldn't be visible to TTM in the first place, but
until we fix that up, don't clear the page metadata because that
will upset the exporter.

Reported-and-tested-by: Cristoph Haag <haagch.christoph@googleemail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-02-05 16:03:29 +01:00
Thomas Hellstrom c66f854338 drm/ttm: Fix TTM object open regression
Commit drm/ttm: ttm object security fixes for render nodes introduced a
regression where, if a TTM object was opened multiple times from the same
open file, the caller would spin uninterruptibly in the kernel.

Fix this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-02-05 09:29:25 +01:00
Dave Airlie cfd72a4c20 Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
  (but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over

Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
  drm/i915/bdw: make sure south port interrupts are enabled properly v2
  drm/i915: Include more information in disabled hotplug interrupt warning
  drm/i915: Only complain about a rogue hotplug IRQ after disabling
  drm/i915: Only WARN about a stuck hotplug irq ONCE
  drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
2014-01-20 10:21:54 +10:00
Dave Airlie faf096ffba Merge tag 'vmwgfx-next-2014-01-13' of git://people.freedesktop.org/~thomash/linux into drm-next
Anyway, nothing big here, Three more code cleanup patches from Rashika
Kheria, and one TTM/vmwgfx patch from me that tightens security around TTM
objects enough for them to opened using prime objects from render nodes:

Previously any client could access a shared buffer using the "name", also
without actually opening it. Now a reference is required, and for render nodes
such a reference is intended to only be obtainable using a prime fd.

vmwgfx-next 2014-01-13 pull request

* tag 'vmwgfx-next-2014-01-13' of git://people.freedesktop.org/~thomash/linux:
  drivers: gpu: Mark functions as static in vmwgfx_fence.c
  drivers: gpu: Mark functions as static in vmwgfx_buffer.c
  drivers: gpu: Mark functions as static in vmwgfx_kms.c
  drm/ttm: ttm object security fixes for render nodes
2014-01-14 10:55:36 +10:00
Rashika Kheria 5202870412 drivers: gpu: Remove unused function in ttm_lock.c
Remove unused function ttm_write_lock_downgrade() from
drm/ttm/ttm_lock.c.

This eliminates the following warning in drm/ttm/ttm_lock.c:
drivers/gpu/drm/ttm/ttm_lock.c:189:6: warning: no previous prototype for ‘ttm_write_lock_downgrade’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-01-08 13:24:14 +01:00
Rashika Kheria dcbff15a60 drivers: gpu: Mark function as static in ttm_bo_util.c
Mark functions as static because they are not used outside the file
drm/ttm/ttm_bo_util.c.

This eliminates the following warnings in drm/ttm/ttm_bo_util.c:
drivers/gpu/drm/ttm/ttm_bo_util.c:190:5: warning: no previous prototype for ‘ttm_mem_reg_ioremap’ [-Wmissing-prototypes]
drivers/gpu/drm/ttm/ttm_bo_util.c:222:6: warning: no previous prototype for ‘ttm_mem_reg_iounmap’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-01-08 13:23:41 +01:00
Rashika Kheria 6e87fa481f drivers: gpu: Mark function as static in ttm_bo.c
Mark function as static because it is not used outside file
drm/ttm/ttm_bo.c.

This eliminates the following warning in drm/ttm/ttm_bo.c:
drivers/gpu/drm/ttm/ttm_bo.c:960:5: warning: no previous prototype for ‘ttm_bo_move_buffer’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-01-08 13:22:33 +01:00
Thomas Hellstrom 05efb1abec drm/ttm: ttm object security fixes for render nodes
When a client looks up a ttm object, don't look it up through the device hash
table, but rather from the file hash table. That makes sure that the client
has indeed put a reference on the object, or in gem terms, has opened
the object; either using prime or using the global "name".

To avoid a performance loss, make sure the file hash table entries can be
looked up from under an RCU lock, and as a consequence, replace the rwlock
with a spinlock, since we never need to take it in read mode only anymore.

Finally add a ttm object lookup function for the device hash table, that is
intended to be used when we put a ref object on a base object or, in  gem terms,
when we open the object.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-01-08 10:11:57 +01:00
Thomas Hellstrom 58aa6622d3 drm/ttm: Correctly set page mapping and -index members
Needed for some vm operations; most notably unmap_mapping_range() with
even_cows = 0.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-01-08 10:08:28 +01:00
Thomas Hellstrom 667a50db04 drm/ttm: Refuse to fault (prime-) imported pages
This is illegal for at least two reasons:

1) While it may work on some platforms / iommus, obtaining page pointers from
mapped sg-lists is illegal, since the DMA API allows page pointer information
to be destroyed in the sg mapping process.

2) TTM has no way of determining the linear kernel map caching state of the
underlying pages. PTEs with conflicting caching state pointing to the same
pfn is not allowed.

TTM operations touching pages of imported sg-tables should be redirected through
the proper dma-buf operations.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
2014-01-08 09:55:05 +01:00
Thomas Hellstrom 7dfe8b6187 drm/ttm: Use VM_PFNMAP for shared bo maps
VM_PFNMAP is faster than VM_MIXEDMAP due to reduced page administration so
use it for shared maps where we don't have any Copy-On-Write pages. For
private maps, we continue to use VM_MIXEDMAP.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-01-08 09:53:12 +01:00
Thomas Hellstrom 2e6d8b469b drm/ttm: Fix swapin regression
Commit "drm/ttm: Don't move non-existing data" didn't take the
swapped-out corner case into account. This patch corrects that.
Fixes blank screen after attempted suspend / hibernate on vmwgfx.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-23 10:33:07 +10:00
Daniel Vetter 4cda878b12 drm: Kill DRM_SUSER
Checking directly for the right capability is simpler. Also this rids
us of a few places that use DRM_CURRENTPID.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:35:45 +10:00
Thomas Hellstrom d386735588 drm/ttm: Fix accesses through vmas with only partial coverage
VMAs covering a bo but that didn't start at the same address space offset as
the bo they were mapping were incorrectly generating SEGFAULT errors in
the fault handler.

Reported-by: Joseph Dolinak <kanilo2@yahoo.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
2013-12-16 10:08:35 -08:00
Dave Airlie 27946e9710 Merge branch 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux into drm-fixes
The set_need_resched() removal fix and yet another fix in
ttm_bo_move_memcpy().

* 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Remove set_need_resched from the ttm fault handler
  drm/ttm: Don't move non-existing data
2013-11-21 18:46:56 +10:00
Thomas Hellstrom c58f009e01 drm/ttm: Remove set_need_resched from the ttm fault handler
Addresses
"[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE".

In the first occurence it was used to try to be nice while releasing the
mmap_sem and retrying the fault to work around a locking inversion.
The second occurence was never used.

There has been some discussion whether we should change the locking order to
mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves
that locking order undefined. The solution that we release the mmap_sem if
tryreserve fails and wait for the buffer to become unreserved is something
we want in any case, and follows how the core vm system waits for pages
to be come unlocked while releasing the mmap_sem.

The code also outlines what needs to be changed if we want to establish the
locking order as mmap_sem -> bo::reserve.

One slight issue that remains with this code is that the fault handler might
be prone to starvation if another thread countinously reserves the buffer.
IMO that usage pattern is highly unlikely.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2013-11-20 03:46:54 -08:00
Thomas Hellstrom 0bc254257b drm/ttm: Don't move non-existing data
If ttm_bo_move_memcpy was instructed to move a non-populated ttm to
io memory, it would first populate the ttm, then move the data and then
destroy the ttm. That's stupid. However, some drivers might have relied on
this to clear io memory from old stuff. So instead of a NOP, which would
be the most efficient, just clear the destination.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-20 03:43:28 -08:00
Thomas Hellstrom 65981f7681 drm/ttm: Add a minimal prime implementation for ttm base objects
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-18 00:46:41 -08:00
Thomas Hellstrom 8d17fb4455 drm/ttm: Allow execbuf util reserves without ticket
If no reservation ticket is given to the execbuf reservation utilities,
try reservation with non-blocking semantics.
This is intended for eviction paths that use the execbuf reservation
utilities for convenience rather than for deadlock avoidance.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-18 00:38:52 -08:00
Dave Airlie 792e6a6cb2 Merge branch 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux into drm-next
The page-prot bit fix.

* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Fix vma page_prot bit manipulation
2013-11-14 09:52:10 +10:00
Thomas Hellstrom 3943875e7b drm/ttm: Fix vma page_prot bit manipulation
Fix a long-standing TTM issue where we manipulated the vma page_prot
bits while mmap_sem was taken in read mode only. We now make a local
copy of the vma structure which we pass when we set the ptes.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-11-12 23:55:31 -08:00
Dave Airlie 212c444baa Merge branch 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux into drm-next
- A couple of fixes that never made it into fixes-3.12
- Make NO_EVICT bo's available for shrinkers when on delayed-delete list
- Allow retrying page-faults that need to wait for GPU.

* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Fix memory type compatibility check
  drm/ttm: Fix ttm_bo_move_memcpy
  drm/ttm: Handle in-memory region copies
  drm/ttm: Make NO_EVICT bos available to shrinkers pending destruction
  drm/ttm: Allow vm fault retries
2013-11-07 12:22:10 +10:00
Thomas Hellstrom 59c8e66378 drm/ttm: Fix memory type compatibility check
Also check the busy placements before deciding to move a buffer object.
Failing to do this may result in a completely unneccessary move within a
single memory type.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
2013-11-06 04:36:22 -08:00
Thomas Hellstrom da95c788ef drm/ttm: Fix ttm_bo_move_memcpy
All error paths will want to keep the mm node, so handle this at the
function exit. This fixes an ioremap failure error path.
Also add some comments to make the function a bit easier to understand.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
2013-11-06 04:36:12 -08:00
Jakob Bornecrantz 9a0599ddea drm/ttm: Handle in-memory region copies
Fix the case where the ttm pointer may be NULL causing
a NULL pointer dereference.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
2013-11-06 04:35:58 -08:00
Thomas Hellstrom 15205fbcbe drm/ttm: Make NO_EVICT bos available to shrinkers pending destruction
NO_EVICT bos that are not idle when all references are dropped are put on
the delayed destroy list. However, since they are not on LRU lists, they
are not available to shrinkers at that point, and buffers on the delayed
destroy list are not checked very often for idle.

So when these buffers are put on the delayed destroy list, clear the
NO_EVICT flag and put them on the right LRU list. This way they are
immediately available for eviction or shrinkers and will not cause false
OOMS.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-06 04:21:50 -08:00
Thomas Hellstrom cbe12e74ee drm/ttm: Allow vm fault retries
Make use of the FAULT_FLAG_ALLOW_RETRY flag to allow dropping the
mmap_sem while waiting for bo idle.

FAULT_FLAG_ALLOW_RETRY appears to be primarily designed for disk waits
but should work just as fine for GPU waits..

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-06 04:14:43 -08:00
Thomas Hellstrom 7aeb7448d8 drm/ttm: Enable the dma page pool also for intel IOMMUs
Used by the vmwgfx driver

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-11-06 03:55:52 -08:00
Linus Torvalds ed24fee24a Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm radeon/nouveau/core fixes from Dave Airlie:
 "Mostly radeon fixes, with some nouveau bios parser, ttm fix and a fix
  for AST driver"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits)
  drm/fb-helper: don't sleep for screen unblank when an oops is in progress
  drm, ttm Fix uninitialized warning
  drm/ttm: fix the tt_populated check in ttm_tt_destroy()
  drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path
  drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM
  drm/nouveau/kms: enable for non-vga pci classes
  drm/nouveau/bios/init: stub opcode 0xaa
  drm/radeon: avoid UVD corruptions on AGP cards
  drm/radeon: fix panel scaling with eDP and LVDS bridges
  drm/radeon/dpm: rework auto performance level enable
  drm/radeon: Fix hmdi typo
  drm/radeon/dpm/rs780: fix force_performance state for same sclks
  drm/radeon/dpm/rs780: don't enable sclk scaling if not required
  drm/radeon/dpm/rs780: add some sanity checking to sclk scaling
  drm/radeon/dpm/rs780: use drm_mode_vrefresh()
  drm/udl: rip out set_need_resched
  drm/ast: fix the ast open key function
  drm/radeon/dpm: add bapm callback for kb/kv
  drm/radeon/dpm: add bapm callback for trinity
  drm/radeon/dpm: add infrastructure to properly handle bapm
  ...
2013-09-18 21:17:44 -05:00
Prarit Bhargava bcf73a1083 drm, ttm Fix uninitialized warning
Fix uninitialized warning.

drivers/gpu/drm/ttm/ttm_object.c: In function ‘ttm_base_object_lookup’:
drivers/gpu/drm/ttm/ttm_object.c:213:10: error: ‘base’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
  kref_put(&base->refcount, ttm_release_base);
          ^
drivers/gpu/drm/ttm/ttm_object.c:221:26: note: ‘base’ was declared here
  struct ttm_base_object *base;

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19 11:51:51 +10:00
Ben Skeggs 182b17c8dc drm/ttm: fix the tt_populated check in ttm_tt_destroy()
After a vmalloc failure in ttm_dma_tt_alloc_page_directory(),
ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up
inside the driver's unpopulate() hook when populate() has never yet
been called.

On nouveau, the first issue to be hit because of this is that
dma_address[] may be a NULL pointer.  After working around this,
ttm_pool_unpopulate() may potentially hit the same issue with
the pages[] array.

It seems to make more sense to avoid calling unpopulate on already
unpopulated TTMs than to add checks to all the implementations.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19 11:48:30 +10:00
Dave Chinner 7dc19d5aff drivers: convert shrinkers to new count/scan API
Convert the driver shrinkers to the new API.  Most changes are compile
tested only because I either don't have the hardware or it's staging
stuff.

FWIW, the md and android code is pretty good, but the rest of it makes me
want to claw my eyes out.  The amount of broken code I just encountered is
mind boggling.  I've added comments explaining what is broken, but I fear
that some of the code would be best dealt with by being dragged behind the
bike shed, burying in mud up to it's neck and then run over repeatedly
with a blunt lawn mower.

Special mention goes to the zcache/zcache2 drivers.  They can't co-exist
in the build at the same time, they are under different menu options in
menuconfig, they only show up when you've got the right set of mm
subsystem options configured and so even compile testing is an exercise in
pulling teeth.  And that doesn't even take into account the horrible,
broken code...

[glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10 18:56:32 -04:00
Maarten Lankhorst 5c692948d8 drm/ttm: kill unused functions
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19 09:36:12 +10:00
David Herrmann abf190351b drm/ttm: inline drm_bo_setup_vm()
This helper is used only once and just wraps a call to
drm_vma_offset_add(). Remove this unneeded indirection to safe 10 lines of
code.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-07 18:08:05 +10:00
David Herrmann 78af329a85 drm/ttm: replace drm_mm_pre_get() by direct alloc
Instead of calling drm_mm_pre_get() in a row, we now preallocate the node
and then use the atomic insertion functions. This has the exact same
semantics and there is no reason to use the racy pre-allocations.

Note that ttm_bo_man_get_node() does not run in atomic context. Nouveau
already uses GFP_KERNEL alloc in nouveau/nouveau_ttm.c in
nouveau_gart_manager_new(). So we can do the same in
ttm_bo_man_get_node().

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07 10:15:29 +10:00
David Herrmann 31e5d7c67b drm/mm: add "best_match" flag to drm_mm_insert_node()
Add a "best_match" flag similar to the drm_mm_search_*() helpers so we
can convert TTM to use them in follow up patches. We can also inline the
non-generic helpers and move them into the header to allow compile-time
optimizations.

To make calls to drm_mm_{search,insert}_node() more readable, this
converts the boolean argument to a flagset. There are pending patches that
add additional flags for top-down allocators and more.

v2:
 - use flag parameter instead of boolean "best_match"
 - convert *_search_free() helpers to also use flags argument

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07 10:08:58 +10:00
David Herrmann 51335df9f0 drm/vma: provide drm_vma_node_unmap() helper
Instead of unmapping the nodes in TTM and GEM users manually, we provide
a generic wrapper which does the correct thing for all vma-nodes.

v2: remove bdev->dev_mapping test in ttm_bo_unmap_virtual_unlocked() as
ttm_mem_io_free_vm() does nothing in that case (io_reserved_vm is 0).
v4: Fix docbook comments
v5: use drm_vma_node_size()

Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-25 20:47:08 +10:00
David Herrmann 72525b3f33 drm/ttm: convert to unified vma offset manager
Use the new vma-manager infrastructure. This doesn't change any
implementation details as the vma-offset-manager is nearly copied 1-to-1
from TTM.

The vm_lock is moved into the offset manager so we can drop it from TTM.
During lookup, we use the vma locking helpers to take a reference to the
found object.
In all other scenarios, locking stays the same as before. We always
guarantee that drm_vma_offset_remove() is called only during destruction.
Hence, helpers like drm_vma_node_offset_addr() are always safe as long as
the node has a valid offset.

This also drops the addr_space_offset member as it is a copy of vm_start
in vma_node objects. Use the accessor functions instead.

v4:
 - remove vm_lock
 - use drm_vma_offset_lock_lookup() to protect lookup (instead of vm_lock)

Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Martin Peres <martin.peres@labri.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-25 20:47:07 +10:00
David Herrmann 77ef8bbc87 drm: make drm_mm_init() return void
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-02 13:34:41 +10:00
Maarten Lankhorst 009a9dadb6 drm/ttm: get rid of ttm_bo_is_reserved usage
Use lockdep_assert_held instead.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 12:04:10 +10:00
Maarten Lankhorst 3482032457 drm/ttm: inline ttm_bo_reserve and related calls
Makes lockdep a lot more useful.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 12:04:09 +10:00
Maarten Lankhorst 5e33840511 drm/ttm: convert to the reservation api
Now that the code is compatible in semantics, flip the switch.
Use ww_mutex instead of the homegrown implementation.

ww_mutex uses -EDEADLK to signal that the caller has to back off,
and -EALREADY to indicate this buffer is already held by the caller.

ttm used -EAGAIN and -EDEADLK for those, respectively. So some changes
were needed to handle this correctly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 12:04:01 +10:00
Maarten Lankhorst ecff665f5e drm/ttm: make ttm reservation calls behave like reservation calls
This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 12:02:20 +10:00
Libin 025df77554 drm: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.

Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-16 13:14:00 +10:00
Dave Airlie afe6804c04 ttm: export functions to allow qxl do its own iomapping
qxl wants to use io mapping like i915 gem does, for now
just export the symbols so the driver can implement atomic
page maps using io mapping.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-12 13:50:46 +10:00