Commit Graph

143 Commits

Author SHA1 Message Date
Gustavo Pimentel e8817de7fb pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
Cleanup PCI_ENDPOINT_TEST memspace (by moving the interrupt number away
from command section).

Add IRQ_TYPE register to identify the triggered ID interrupt required
for the READ/WRITE/COPY tests and raise IRQ test commands.

Update documentation accordingly.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:39:44 +01:00
Gustavo Pimentel 8963106eab PCI: endpoint: Add MSI-X interfaces
Add PCI_EPC_IRQ_MSIX type.

Add MSI-X callbacks signatures to the ops structure.

Add sysfs interface for set/get MSI-X capability maximum number.

Update documentation accordingly.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:34:23 +01:00
Oza Pawandeep 7e9084b367 PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices
PCIe ERR_FATAL errors mean the Link is unreliable.  Components on the Link
may need to be reset to return to reliable operation (PCIe r4.0, sec
6.2.2).  We previously handled these errors much differently depending on
whether the platform supports Downstream Port Containment (DPC) (PCIe r4.0,
sec 6.2.10) or not.

The AER driver has historically logged the error details, called
driver-supplied pci_error_handlers callbacks, and reset the Link.  This
reset downstream devices, but did not remove them from the PCI subsystem,
re-enumerate them, or call their driver .remove() or .probe() methods.

DPC is different because the hardware automatically disables the Link when
it detects ERR_FATAL, which resets downstream devices.  There's no
opportunity for pci_error_handlers callbacks before resetting the Link.
The DPC driver removes affected devices (which calls their driver .remove()
methods), brings the Link back up, and re-enumerates (which calls driver
.probe() methods).

Align AER ERR_FATAL handling with DPC by resetting the Link in software,
skipping the driver pci_error_handlers callbacks, removing the devices from
the PCI subsystem, and re-enumerating.  The idea is that drivers and
devices should see the same behavior for ERR_FATAL events, regardless of
whether they're handled by AER or DPC.

Here are the basic ERR_FATAL recovery steps, showing the previous AER
behavior, the AER behavior after this patch, and the DPC behavior:

                          AER        AER      DPC
                          previous   new      behavior
                          --------   ---      --------
  Log error               yes        yes      yes (minimal)
  drv.error_detected()    yes        no       no
  Reset Link              yes        yes      yes
  drv.mmio_enabled()      yes        no       no
  drv.slot_reset()        yes        no       no
  drv.resume()            yes        no       no
  Remove PCI devices      no         yes      yes
    (calls drv.remove())
  Re-enumerate            no         yes      yes
    (calls drv.probe())

N.B. With DPC, the Link reset happens before the driver .remove() calls,
while with AER, the reset happens *after* the .remove() calls.  The goal is
to eventually do the reset before .remove() for AER as well.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, squash doc patch into this, remove unused
"result_data"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17 16:44:13 -05:00
Randy Dunlap 6d516d6798 PCI: Update location of pci.ids file
Update the URL for the pci.ids file and add locations for its mirrors.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Cc: Martin Mares <mj@ucw.cz>
Cc: Michal Vaner <vorner@vorner.cz>
2018-02-22 15:00:43 -06:00
Mauro Carvalho Chehab ff41c41943 docs: update old references for DocBook from the documentation
DocBook is mentioned several times at the documentation. Update
the obsolete references from it at the DocBook.

Acked-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-16 08:44:19 -03:00
Linus Torvalds 857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Bjorn Helgaas ef1b5dad5a Merge branch 'pci/virtualization' into next
* pci/virtualization:
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: Call pcie_flr() from reset_chelsio_generic_dev()
  PCI: Call pcie_flr() from reset_intel_82599_sfp_virtfn()
  PCI: Export pcie_flr()
  PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
  PCI: Avoid FLR for Intel 82579 NICs

Conflicts:
	include/linux/pci.h
2017-04-28 10:36:12 -05:00
Kishon Vijay Abraham I 16263d9e1d Documentation: PCI: Add userguide for PCI endpoint test function
Add documentation to help users use pci-epf-test function driver and
pci_endpoint_test host driver for testing PCI.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:20 -05:00
Kishon Vijay Abraham I 1357053381 Documentation: PCI: Add binding documentation for pci-test endpoint function
Add binding documentation for pci-test endpoint function that helps in
adding and configuring pci-test endpoint function.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:16 -05:00
Bodong Wang 0e7df22401 PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
Sometimes it is not desirable to bind SR-IOV VFs to drivers.  This can save
host side resource usage by VF instances that will be assigned to VMs.

Add a new PCI sysfs interface "sriov_drivers_autoprobe" to control that
from the PF.  To modify it, echo 0/n/N (disable probe) or 1/y/Y (enable
probe) to:

  /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe

Note that this must be done before enabling VFs.  The change will not take
effect if VFs are already enabled.  Simply, one can disable VFs by setting
sriov_numvfs to 0, choose whether to probe or not, and then re-enable the
VFs by restoring sriov_numvfs.

[bhelgaas: changelog, ABI doc]
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-04-20 08:53:51 -05:00
Kishon Vijay Abraham I 42fc2ac6e8 Documentation: PCI: Add specification for the *PCI test* function device
Add specification for the *PCI test* virtual function device. The endpoint
function driver and the host PCI driver should be created based on this
specification.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-11 14:18:37 -05:00
Kishon Vijay Abraham I bea37d3d31 Documentation: PCI: Guide to use PCI endpoint configfs
Add Documentation to help users use PCI endpoint to configure PCI endpoint
function and to bind the endpoint function with endpoint controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-11 14:18:36 -05:00
Kishon Vijay Abraham I a8a5be0988 Documentation: PCI: Guide to use PCI Endpoint Core Layer
Add Documentation to help users use endpoint library to enable endpoint
mode in the PCI controller and add new PCI endpoint functions.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-11 14:18:36 -05:00
Cao jin 97e4e959c9 pci-error-recovery: doc cleanup
Include whitespace shooting; correction; typo fix; superfluous word
dropping.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-29 15:51:32 -06:00
Linus Torvalds be834aafdf A few fixes for the docs tree, including one for a 4.11 build regression.
-----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEEUOvtSCFqLxY/7px3jc41VjAi5XoFAli6ANEPHGNvcmJldEBs
 d24ubmV0AAoJEI3ONVYwIuV6GcsQAKQsgmXmT+3ZpoCDzGF/MvZLra8/xjYSWqKZ
 jXsUKFmlef7aHZRC79Vw0VyEJdNc+QrmoXCNr9BVl4+z8curDbsGE9/dgV05shAL
 vbCuDLNkAYb4o7Kld8cAJQxefs/C/+8CIFZAICICz7L6rgutz8NluVkO7mdqQrYD
 2uJl3P2paXKiLDqb2MANGJL9C9ALUnArTopjyK9MIBapuPulVHZse33Ytd4V0951
 RKMIEPccZetioZC55qnO2O5sJ+O7nXNIQafzggy1rA2MIcHnkm/zARdBfYgevJBf
 dgqfumkCB8Wc/8oB+XRNyKDNH6IXyTk3rd1QssVZVmHlDLB3cfBMpDl5cKV5D3BX
 DOrLxPL8Cf8CGbAvyjQcd4b8qaYMJ/fSu2yJFFcL0nOjEucIKBzhIj5cxsGSKcsF
 6d5ubv9sXvwzrKxhTkU5mPoE4J+zyaBs+NCE9qEZoxbjokufETEGXWoCMLTXRkiG
 mwD52F+QG0aBHEMMh7kgRwxsoGdY9Tm4u6FL/IppUswG0I/Vobp7AwApRwCBzHIM
 /V92Be1Ye6bwWatdUZs2NGXP6yy1eBVv7rEof5+2WVwUiLNcFEaHV/1r6fUbj73u
 MtKkz3NiVUApPXapa4rTkyjynv+EL7Vexkv6n81JVKHaztODOiIIHSvIBHvXz2wD
 Bpxrsx4j
 =tZdW
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "A few fixes for the docs tree, including one for a 4.11 build
  regression"

* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
  Documentation/sphinx: fix primary_domain configuration
  docs: Fix htmldocs build failure
  doc/ko_KR/memory-barriers: Update control-dependencies section
  pcieaer doc: update the link
  Documentation: Update path to sysrq.txt
2017-03-04 11:32:18 -08:00
Cao jin 2eb6a4b26d pcieaer doc: update the link
The original link is empty, replace it.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03 15:50:00 -07:00
Bjorn Helgaas 3ec2574e31 Merge branch 'pci/msi' into next
* pci/msi:
  PCI/MSI: Update MSI/MSI-X bits in PCIEBUS-HOWTO
  PCI/MSI: Document pci_alloc_irq_vectors(), deprecate pci_enable_msi()
  PCI/MSI: Return -ENOSPC if pci_enable_msi_range() can't get enough vectors
  PCI/portdrv: Use pci_irq_alloc_vectors()
  PCI/MSI: Check that we have a legacy interrupt line before using it
  PCI/MSI: Remove pci_msi_domain_{alloc,free}_irqs()
  PCI/MSI: Remove unused pci_msi_create_default_irq_domain()
  PCI/MSI: Return failure when msix_setup_entries() fails
  PCI/MSI: Remove pci_enable_msi_{exact,range}()
  amd-xgbe: Update PCI support to use new IRQ functions
  [media] cobalt: use pci_irq_allocate_vectors()
  PCI/MSI: Fix msi_capability_init() kernel-doc warnings
2017-02-15 11:56:10 -06:00
Christoph Hellwig e4e7d59704 PCI/MSI: Update MSI/MSI-X bits in PCIEBUS-HOWTO
Update the MSI/MSI-X bits in PCIEBUS-HOWTO.  Stop talking about low-level
details that mention deprecated APIs and concentrate on what service
drivers should do and why.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-15 11:51:33 -06:00
Christoph Hellwig c3cf2c61dd PCI/MSI: Document pci_alloc_irq_vectors(), deprecate pci_enable_msi()
Document pci_alloc_irq_vectors() instead of the deprecated pci_enable_msi()
and pci_enable_msix() APIs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-15 10:32:57 -06:00
Michael S. Tsirkin 2fd260f03b PCI/AER: Remove unused .link_reset() callback
No hardware seems to actually call .link_reset(), and no driver implements
it as more than a nop stub.

Drop mentions of the callback from everywhere.  It's dropped from the
documentation as well, but the doc really needs to be updated to reflect
reality better (e.g., on PCIe, slot reset is the link reset).  This will be
done in a later patch.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-09 16:41:58 -06:00
Christoph Hellwig 4fe0395550 PCI/MSI: Remove pci_enable_msi_{exact,range}()
All multi-MSI allocations are now done through pci_irq_alloc_vectors(), so
remove the old pci_enable_msi_range() and pci_enable_msi_exact()
interfaces.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-13 11:08:21 -06:00
Linus Torvalds e6e3d8f8f4 PCI changes for the v4.9 merge window:
Enumeration
     microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
 
   Resource management
     Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
     Ignore requested alignment for VF BARs (Yongji Xie)
 
   PCI device hotplug
     Make core explicitly non-modular (Paul Gortmaker)
 
   PCIe native device hotplug
     Rename pcie_isr() locals for clarity (Bjorn Helgaas)
     Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
     Remove unnecessary guard (Bjorn Helgaas)
     Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
     Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
     Clear attention LED on device add (Keith Busch)
     Allow exclusive userspace control of indicators (Keith Busch)
     Process all hotplug events before looking for new ones (Mayurkumar Patel)
     Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
     Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
     Make explicitly non-modular (Paul Gortmaker)
 
   Power management
     Afford direct-complete to devices with non-standard PM (Lukas Wunner)
     Query platform firmware for device power state (Lukas Wunner)
     Recognize D3cold in pci_update_current_state() (Lukas Wunner)
     Avoid unnecessary resume after direct-complete (Lukas Wunner)
     Make explicitly non-modular (Paul Gortmaker)
 
   Virtualization
     Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
     Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
 
   MSI
     Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
 
   AER
     Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
     Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
     Fix aer_probe() kernel-doc comment (Cao jin)
     Add bus flag to skip source ID matching (Jon Derrick)
     Avoid memory allocation in interrupt handling path (Jon Derrick)
     Cache capability position (Keith Busch)
     Make explicitly non-modular (Paul Gortmaker)
     Remove duplicate AER severity translation (Tyler Baicar)
     Send correct severity to calculate AER severity (Tyler Baicar)
 
   Precision Time Measurement
     Add Precision Time Measurement (PTM) support (Jonathan Yong)
     Add PTM clock granularity information (Bjorn Helgaas)
     Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
 
   Generic host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Make explicitly non-modular (Paul Gortmaker)
 
   Altera host bridge driver
     Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
     Poll for link training status after retraining the link (Ley Foon Tan)
     Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
     Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
     Make MSI explicitly non-modular (Paul Gortmaker)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
 
   ARM Versatile host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
 
   Axis ARTPEC-6 host bridge driver
     Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
 
   Freescale i.MX6 host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Intel VMD host bridge driver
     Add quirk for AER to ignore source ID (Jon Derrick)
     Allocate IRQ lists with correct MSI-X count (Jon Derrick)
     Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
     Eliminate vmd_vector member from list type (Jon Derrick)
     Eliminate index member from IRQ list (Jon Derrick)
     Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
     Request userspace control of PCIe hotplug indicators (Keith Busch)
     Move VMD driver to drivers/pci/host (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
 
   Microsoft Hyper-V host bridge driver
     Use zero-length array in struct pci_packet (Dexuan Cui)
     Use pci_function_description[0] in struct definitions (Dexuan Cui)
     Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
     Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
     Handle hv_pci_generic_compl() error case (Dexuan Cui)
     Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
 
   NVIDIA Tegra host bridge driver
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Remove redundant _data suffix (Thierry Reding)
     Use of_device_get_match_data() (Thierry Reding)
 
   Qualcomm host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Renesas R-Car host bridge driver
     Consolidate register space lookup and ioremap (Bjorn Helgaas)
     Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
     Add multi-MSI support (Grigory Kletsko)
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Fix some checkpatch warnings (Sergei Shtylyov)
     Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
 
   Rockchip host bridge driver
     Add DT bindings for Rockchip PCIe controller (Shawn Lin)
     Add Rockchip PCIe controller support (Shawn Lin)
     Improve the deassert sequence of four reset pins (Shawn Lin)
     Fix wrong transmitted FTS count (Shawn Lin)
     Increase the Max Credit update interval (Rajat Jain)
 
   Samsung Exynos host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   Synopsys DesignWare host bridge driver
     Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
     Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
     Check LTSSM training bit before deciding link is up (Jisheng Zhang)
     Move link wait definitions to .c file (Joao Pinto)
     Wait for iATU enable (Joao Pinto)
     Add iATU Unroll feature (Joao Pinto)
     Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
     Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
     Remove redundant platform_get_resource() return value check (Wei Yongjun)
 
   TI DRA7xx host bridge driver
     Make explicitly non-modular (Paul Gortmaker)
 
   TI Keystone host bridge driver
     Propagate request_irq() failure (Wei Yongjun)
 
   Xilinx AXI host bridge driver
     Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
     Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
     Clear correct MSI set bit (Bharat Kumar Gogada)
     Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
     Make explicitly non-modular (Paul Gortmaker)
     Relax device number checking to allow SR-IOV (Po Liu)
 
   Xilinx NWL host bridge driver
     Expand error logging (Bharat Kumar Gogada)
     Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
     Make explicitly non-modular (Paul Gortmaker)
 
   Miscellaneous
     Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
     portdrv: Make explicitly non-modular (Paul Gortmaker)
     Make DPC explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9pOwAAoJEFmIoMA60/r8NfMQAMEMYK3yv/RQtcQvtB26L2eJ
 Zn6eJXZPFDsaP+uRYrZEEphHccGFJgmtnOEYjo5XH+wUovmj8BxIy58APEGij/69
 iJyaXkI2jRVCOFna6WLJKS0jM6/Lw40RdwrANqHfvzR9N8pEjDD36BglshFNK/pK
 07dYNtI+/sq1j5K1UE6bK4uiAURiPc2SfK4/+M4Mg4SfZMQgLIvpT8VHdercYSXN
 eGA0SHGNm8qIK2JArwa293z6zB0Kw05juLayZHai6PwDqqNMvzgzS4pChGJl4klH
 fFe3bhlBVR2SGh9nuHMgIMWKGKGkjWBjwS1p0ENDgdpBVPXmDIc7Ka8Q0BqAFz+F
 YOmj4BtR8U3mOj942bxYZYqqqt02Brlu+/YkY6+OtNjKWi7w0s24dd5vEfBl2nVV
 T2klW4P9MuCnsutfrxkFL8voJRCIdV3fohwLHfHVfNTZN+bSZnlo9MiywbgQlexV
 5BKIA5z9E87bhvo7Mr8VCZjjEV0E3RrT4sgaJyQhGUGIpuZDiZFHSujBo53jRSdy
 jvIb22cQtmQJAkafID6djcMbXh+LIhXqUfH1ZVqpJFFMJN43zB7dwaMwrLsZgqTi
 ZV7VxZJVN7U6JCQvtNvwLBeKT82T7jxVZoSIogc/UR0gelb6jPN/yiTX5TUzMgPs
 HW7F3hv0AdmYKPcGZJAP
 =0Aq4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Summary of PCI changes for the v4.9 merge window:

  Enumeration:
   - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)

  Resource management:
   - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
   - Ignore requested alignment for VF BARs (Yongji Xie)

  PCI device hotplug:
   - Make core explicitly non-modular (Paul Gortmaker)

  PCIe native device hotplug:
   - Rename pcie_isr() locals for clarity (Bjorn Helgaas)
   - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
   - Remove unnecessary guard (Bjorn Helgaas)
   - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
   - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
   - Clear attention LED on device add (Keith Busch)
   - Allow exclusive userspace control of indicators (Keith Busch)
   - Process all hotplug events before looking for new ones (Mayurkumar Patel)
   - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
   - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
   - Make explicitly non-modular (Paul Gortmaker)

  Power management:
   - Afford direct-complete to devices with non-standard PM (Lukas Wunner)
   - Query platform firmware for device power state (Lukas Wunner)
   - Recognize D3cold in pci_update_current_state() (Lukas Wunner)
   - Avoid unnecessary resume after direct-complete (Lukas Wunner)
   - Make explicitly non-modular (Paul Gortmaker)

  Virtualization:
   - Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
   - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)

  MSI:
   - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)

  AER:
   - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
   - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
   - Fix aer_probe() kernel-doc comment (Cao jin)
   - Add bus flag to skip source ID matching (Jon Derrick)
   - Avoid memory allocation in interrupt handling path (Jon Derrick)
   - Cache capability position (Keith Busch)
   - Make explicitly non-modular (Paul Gortmaker)
   - Remove duplicate AER severity translation (Tyler Baicar)
   - Send correct severity to calculate AER severity (Tyler Baicar)

  Precision Time Measurement:
   - Add Precision Time Measurement (PTM) support (Jonathan Yong)
   - Add PTM clock granularity information (Bjorn Helgaas)
   - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)

  Generic host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)

  Altera host bridge driver:
   - Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
   - Poll for link training status after retraining the link (Ley Foon Tan)
   - Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
   - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
   - Make MSI explicitly non-modular (Paul Gortmaker)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  ARM Versatile host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)

  Axis ARTPEC-6 host bridge driver:
   - Drop __init from artpec6_add_pcie_port() (Niklas Cassel)

  Freescale i.MX6 host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Intel VMD host bridge driver:
   - Add quirk for AER to ignore source ID (Jon Derrick)
   - Allocate IRQ lists with correct MSI-X count (Jon Derrick)
   - Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
   - Eliminate vmd_vector member from list type (Jon Derrick)
   - Eliminate index member from IRQ list (Jon Derrick)
   - Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
   - Request userspace control of PCIe hotplug indicators (Keith Busch)
   - Move VMD driver to drivers/pci/host (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)

  Microsoft Hyper-V host bridge driver:
   - Use zero-length array in struct pci_packet (Dexuan Cui)
   - Use pci_function_description[0] in struct definitions (Dexuan Cui)
   - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
   - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
   - Handle hv_pci_generic_compl() error case (Dexuan Cui)
   - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)

  NVIDIA Tegra host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant _data suffix (Thierry Reding)
   - Use of_device_get_match_data() (Thierry Reding)

  Qualcomm host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Renesas R-Car host bridge driver:
   - Consolidate register space lookup and ioremap (Bjorn Helgaas)
   - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
   - Add multi-MSI support (Grigory Kletsko)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Fix some checkpatch warnings (Sergei Shtylyov)
   - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)

  Rockchip host bridge driver:
   - Add DT bindings for Rockchip PCIe controller (Shawn Lin)
   - Add Rockchip PCIe controller support (Shawn Lin)
   - Improve the deassert sequence of four reset pins (Shawn Lin)
   - Fix wrong transmitted FTS count (Shawn Lin)
   - Increase the Max Credit update interval (Rajat Jain)

  Samsung Exynos host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Synopsys DesignWare host bridge driver:
   - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
   - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
   - Check LTSSM training bit before deciding link is up (Jisheng Zhang)
   - Move link wait definitions to .c file (Joao Pinto)
   - Wait for iATU enable (Joao Pinto)
   - Add iATU Unroll feature (Joao Pinto)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)
   - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
   - Remove redundant platform_get_resource() return value check (Wei Yongjun)

  TI DRA7xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  TI Keystone host bridge driver:
   - Propagate request_irq() failure (Wei Yongjun)

  Xilinx AXI host bridge driver:
   - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
   - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
   - Clear correct MSI set bit (Bharat Kumar Gogada)
   - Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  Xilinx NWL host bridge driver:
   - Expand error logging (Bharat Kumar Gogada)
   - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)

  Miscellaneous:
   - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
   - portdrv: Make explicitly non-modular (Paul Gortmaker)
   - Make DPC explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
  x86/PCI: VMD: Move VMD driver to drivers/pci/host
  PCI: rockchip: Fix wrong transmitted FTS count
  PCI: rockchip: Improve the deassert sequence of four reset pins
  PCI: rockchip: Increase the Max Credit update interval
  PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
  PCI/AER: Fix aer_probe() kernel-doc comment
  PCI: Ignore requested alignment for VF BARs
  PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
  PCI/AER: Cache capability position
  PCI/AER: Avoid memory allocation in interrupt handling path
  x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
  PCI: pciehp: Allow exclusive userspace control of indicators
  ACPI / APEI: Send correct severity to calculate AER severity
  PCI/AER: Remove duplicate AER severity translation
  x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
  x86/PCI: VMD: Eliminate index member from IRQ list
  ...
2016-10-07 11:46:37 -07:00
Bjorn Helgaas bdf530984d Merge branch 'pci/host-vmd' into next
* pci/host-vmd:
  x86/PCI: VMD: Move VMD driver to drivers/pci/host
  x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
  x86/PCI: VMD: Eliminate index member from IRQ list
  x86/PCI: VMD: Eliminate vmd_vector member from list type
  x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API
  x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count
  PCI: Use positive flags in pci_alloc_irq_vectors()
  PCI: Update "pci=resource_alignment" documentation

Conflicts:
	drivers/pci/host/Kconfig
	drivers/pci/host/Makefile
2016-10-05 14:00:21 -05:00
Bjorn Helgaas 7ece141753 PCI/AER: Remove aerdriver.forceload kernel parameter
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must
not use AER unless _OSC is present and _OSC grants AER control to the OS.
The aerdriver.forceload kernel parameter was a way to enable Linux AER
support on ACPI systems that lack _OSC or fail to grant control the the OS.

Enabling Linux AER support when the firmware doesn't want us to is a recipe
for problems, e.g., the firmware might be handling AER itself.

Remove the aerdriver.forceload kernel parameter and related supporting
code.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14 15:27:49 -05:00
Bjorn Helgaas 9ff25e6b3e PCI/AER: Remove aerdriver.nosourceid kernel parameter
The aerdriver.nosourceid kernel parameter was intended for working around
broken chipsets don't supply the source ID for AER events.  We recently
added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same
purpose.

Remove the aerdriver.nosourceid kernel parameter.  For anything other than
debugging, asking users to find and use kernel parameters is a poor user
experience.  Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any
hardware that needs it.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14 15:27:38 -05:00
Joe Perches 7e93215990 treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLE
It's been eliminated from the sources, remove it from everywhere else.

Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01 17:52:01 -07:00
Christoph Hellwig 4fe0d15488 PCI: Use positive flags in pci_alloc_irq_vectors()
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of
certain interrupt types, pass positive flags like PCI_IRQ_LEGACY,
PCI_IRQ_MSI, etc., to specify the acceptable interrupt types.

This is based on a number of pending driver conversions that just happend
to be a whole more obvious to read this way, and given that we have no
users in the tree yet it can still easily be done.

I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting
all interrupt types very simple.

[bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of
PCI_IRQ_NOLEGACY]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-08-16 14:07:30 -05:00
Christoph Hellwig 4ef33685aa PCI: Spread interrupt vectors in pci_alloc_irq_vectors()
Set the affinity_mask in the PCI device before allocating vectors so that
the affinity can be propagated through the MSI descriptor structures to the
core IRQ code.  To facilitate this, new __pci_enable_msi_range() and
__pci_enable_msix_range() helpers are factored out of their not prefixed
variants which assigning the new IRQ affinity mask in the PCI device so
that the low-level interrupt code can perform the interrupt affinity
assignment and do node-local allocations.

A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that
this function can also be used by drivers that don't wish to use the
automatic affinity assignment.

[bhelgaas: omit "else" after "return" consistently]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:57:03 -05:00
Christoph Hellwig aff171641d PCI: Provide sensible IRQ vector alloc/free routines
Add a function to allocate and free a range of interrupt vectors, using
MSI-X, MSI or legacy vectors (in that order) based on the capabilities of
the underlying device and PCIe complex.

Additionally a new helper is provided to get the Linux IRQ number for given
device-relative vector so that the drivers don't need to allocate their own
arrays to keep track of the vectors for the multi vector MSI-X case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:50:07 -05:00
Linus Torvalds d6a24d0640 The documentation tree update for 4.1. Numerous fixes, the overdue removal
of the i2o docs, some new Chinese translations, and, hopefully, the README
 fix that will end the flow of identical patches to that file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVMOeZAAoJEI3ONVYwIuV6/1YQAJwcVvd3ow6cMKuf8eRKMgjd
 crJUdRF9FTwyY21SRHBaonyiKOthnVedOUYnFQ5Z7jbII0EohJ//72nW0pQrHoGi
 0avkbM+ZAZzXfd/paOiZ5HtYkc8Bdc70mPU1fzfexnPm/JACOGznxQsob05r6/sT
 W1GyJcrLlp4uPrba9rhAdGtaa+mEFrt4SVCI+odXOnxQ/KOZSIu1n1F3bSSvL9zV
 YMBgRrCso+Cdtuhe4N3O1jsVy/hyOnvtqcUgwlD4VzElsshKvxdxHn47yeeWK1qI
 zZfGTv+q5QI/eZgIhBIrBpdCafgLipAmNZhX+M76xeNydhfhp60VizRgKfb6JiW1
 M+nLSnv2vxh4wgkJs7yWgW+8TJ0eCF/w2P/mBi6hDXuIul9gwgmNk+EZ7LONSh+2
 l3PV/dyswNs04qbYgFt2rygsxcg79RRbD54zi+S/3NU38/gh7nlidASKmNu1boG/
 KdZx3F0rmX/xQu4aQ5nIQl2N7sVLkEec+oN+ukQGyBTLVHkfAK06Z4EWUeYmmBKh
 M6gqRY5XJMtCm8D5bons/yZmwmpdZFZMxFGJ4enUwrfsJ8FQ8qy/KmFqF8SojGWQ
 HYs4ZUptz6SYa7K0Txe/q0pkrW+doy7t/Bz+JBNNdG7eLeHIpKhSqSlLIdB7MRKw
 NFA8a4PdgdMpf+Zr4bRy
 =LDbk
 -----END PGP SIGNATURE-----

Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6

Pull documentation updates from Jonathan Corbet:
 "Numerous fixes, the overdue removal of the i2o docs, some new Chinese
  translations, and, hopefully, the README fix that will end the flow of
  identical patches to that file"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (34 commits)
  Documentation/memcg: update memcg/kmem status
  Documentation: blackfin: Makefile: Typo building issue
  Documentation/vm/pagemap.txt: correct location of page-types tool
  Documentation/memory-barriers.txt: typo fix
  doc: Add guest_nice column to example output of `cat /proc/stat'
  Documentation/kernel-parameters: Move "eagerfpu" to its right place
  Documentation: gpio: Update ACPI part of the document to mention _DSD
  docs/completion.txt: Various tweaks and corrections
  doc: completion: context, scope and language fixes
  Documentation:Update Documentation/zh_CN/arm64/memory.txt
  Documentation:Update Documentation/zh_CN/arm64/booting.txt
  Documentation: Chinese translation of arm64/legacy_instructions.txt
  DocBook media: fix broken EIA hyperlink
  Documentation: tweak the maintainers entry
  README: Change gzip/bzip2 to xz compression format
  README: Update version number reference
  doc:pci: Fix typo in Documentation/PCI
  Documentation: drm: Use '->' when describing access through pointers.
  Documentation: Remove mentioning of block barriers
  Documentation/email-clients.txt: Fix one grammar mistake, add extra info about TB
  ...
2015-04-18 11:10:49 -04:00
Michael S. Tsirkin 37a9c502c0 PCI: Clarify policy for vendor IDs in pci.txt
Clarify pci.txt so it matches the "do not add new entries unless they are
shared between multiple drivers" comment in include/linux/pci_ids.h.

[bhelgaas: changelog, strengthen language]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09 13:34:02 -05:00
Masanari Iida 654d2e7cd1 doc:pci: Fix typo in Documentation/PCI
This patch fix spelling typo in Documentation/PCI.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:56 -06:00
Valentin Rothberg 2f9d7389b5 MSI-HOWTO.txt: remove reference on IRQF_DISABLED
The IRQF_DISABLED is a NOOP and scheduled to be removed.  According to Ingo
Molnar in commit e58aa3d2d0 (genirq: Run irq
handlers with interrupts disabled), running IRQ handlers with interrupts
enabled can cause stack overflows when the interrupt line of the issuing
device is still active.

This patch removes IRQF_DISABLED from this documentation.  It was
mentioned to be a solution to avoid deadlocks when a device uses
multiple interrupts.  As the flag is a NOOP this solution does not work
anymore.

Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Jeremiah Mahler 305af08c53 doc: replace "practise" with "practice" in Documentation
To keep the Documentation consistent either
"practise" or "practice" should be used.

Since there are 3 lines with "practise"

  ~/linux/Documentation$ grep -r practise * | wc -l
  3

and 108 lines with "practice"

  ~/linux/Documentation$ grep -r practice * | wc -l
  108

this patch converts "practise" to "practice".

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-19 15:28:56 +02:00
Bjorn Helgaas 02a0947ae4 Merge branch 'pci/dead-code' into next
* pci/dead-code:
  PCI: Remove unused SR-IOV VF Migration support
  iommu/amd: Add include of <linux/irqreturn.h>
  mei: Add include of <linux/irqreturn.h>
  misc: mic: Add include of <linux/irqreturn.h>
2014-02-20 14:32:34 -07:00
Bjorn Helgaas 46cb7b1bd8 PCI: Remove unused SR-IOV VF Migration support
This reverts commit 74bb1bcc7d ("PCI: handle SR-IOV Virtual Function
Migration"), removing this exported interface:

  pci_sriov_migration()

Since pci_sriov_migration() is unused, it is impossible to schedule
sriov_migration_task() or use any of the other migration infrastructure.

This is based on Stephen Hemminger's patch (see link below), but goes a bit
further.

Link: http://lkml.kernel.org/r/20131227132710.7190647c@nehalam.linuxnetplumber.net
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
2014-02-19 11:28:44 -07:00
Alexander Gordeev f7fc32cb20 PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()
The new functions are special cases for pci_enable_msi_range() and
pci_enable_msix_range() when a particular number of MSI or MSI-X
is needed.

By contrast with pci_enable_msi_range() and pci_enable_msix_range()
functions, pci_enable_msi_exact() and pci_enable_msix_exact()
return zero in case of success, which indicates MSI or MSI-X
interrupts have been successfully allocated.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13 10:45:05 -07:00
Alexander Gordeev fef07277f8 PCI/MSI: Fix cut-and-paste errors in documentation
Function pci_enable_msi_range() is used in examples where
pci_enable_msix_range() should have been used instead.

Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13 10:45:01 -07:00
Alexander Gordeev 9a8b0af9b1 PCI/MSI: Add pci_enable_msi() documentation back
We deprecated pci_enable_msi() in 302a2523c2 ("PCI/MSI: Add
pci_enable_msi_range() and pci_enable_msix_range()").

But we changed our minds after noticing that:

  - pci_enable_msi() doesn't have confusing return values like
    pci_enable_msi_block() and pci_enable_msix() did, and

  - pci_enable_msi() has a hundred or so callers that we don't want to
    change.

This adds back the pci_enable_msi() documentation.

[bhelgaas: changelog]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-03 22:08:49 -08:00
Bjorn Helgaas 04f982beb9 Merge branch 'pci/msi' into next
* pci/msi:
  PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()
  PCI/MSI: Add pci_msix_vec_count()
  PCI/MSI: Remove pci_enable_msi_block_auto()
  PCI/MSI: Add pci_msi_vec_count()
2014-01-07 17:34:39 -07:00
Bjorn Helgaas ccb1265454 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Update documentation 00-INDEX file
  PCI: Convert ioapic to be builtin only, not modular
2014-01-07 17:34:33 -07:00
Erik Ekman c2a5a829e2 PCI: Update documentation 00-INDEX file
The PCI-DMA-mapping.txt moved to general docs and became DMA-API-HOWTO.txt
in 5e07c2c730 ("Documentation: rename PCI/PCI-DMA-mapping.txt to
DMA-API-HOWTO.txt").  Add new file about PCI Express I/O Virtualization.

Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-07 16:37:15 -07:00
Alexander Gordeev 302a2523c2 PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()
This adds pci_enable_msi_range(), which supersedes the pci_enable_msi()
and pci_enable_msi_block() MSI interfaces.

It also adds pci_enable_msix_range(), which supersedes the
pci_enable_msix() MSI-X interface.

The old interfaces have three categories of return values:

    negative: failure; caller should not retry
    positive: failure; value indicates number of interrupts that *could*
	have been allocated, and caller may retry with a smaller request
    zero: success; at least as many interrupts allocated as requested

It is error-prone to handle these three cases correctly in drivers.

The new functions return either a negative error code or a number of
successfully allocated MSI/MSI-X interrupts, which is expected to lead to
clearer device driver code.

pci_enable_msi(), pci_enable_msi_block() and pci_enable_msix() still exist
unchanged, but are deprecated and may be removed after callers are updated.

[bhelgaas: tweak changelog]
Suggested-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2014-01-03 17:17:55 -07:00
Alexander Gordeev ff1aa430a2 PCI/MSI: Add pci_msix_vec_count()
This creates an MSI-X counterpart for pci_msi_vec_count().  Device drivers
can use this function to obtain maximum number of MSI-X interrupts the
device supports and use that number in a subsequent call to
pci_enable_msix().

pci_msix_vec_count() supersedes pci_msix_table_size() and returns a
negative errno if device does not support MSI-X interrupts.  After this
update, callers must always check the returned value.

The only user of pci_msix_table_size() was the PCI-Express port driver,
which is also updated by this change.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2014-01-03 17:17:55 -07:00
Alexander Gordeev 7b92b4f61e PCI/MSI: Remove pci_enable_msi_block_auto()
The new pci_msi_vec_count() interface makes pci_enable_msi_block_auto()
superfluous.

Drivers can use pci_msi_vec_count() to learn the maximum number of MSIs
supported by the device, and then call pci_enable_msi_block().

pci_enable_msi_block_auto() was introduced recently, and its only user is
the AHCI driver, which is also updated by this change.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
2014-01-03 17:17:55 -07:00
Alexander Gordeev d1ac1d2622 PCI/MSI: Add pci_msi_vec_count()
Device drivers can use this interface to obtain the maximum number of MSI
interrupts the device supports and use that number, e.g., in a subsequent
call to pci_enable_msi_block().

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2014-01-03 17:17:55 -07:00
Bjorn Helgaas 79bf7fc511 Merge branch 'pci/misc' into next
* pci/misc:
  PCI/checkpatch: Deprecate DEFINE_PCI_DEVICE_TABLE
2013-12-20 12:51:52 -07:00
Alexander Gordeev 52179dc9ed PCI/MSI: Make pci_enable_msi/msix() 'nvec' argument type as int
Make pci_enable_msi_block(), pci_enable_msi_block_auto() and
pci_enable_msix() consistent with regard to the type of 'nvec' argument.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2013-12-20 09:45:05 -07:00
Joe Perches 92e112fdbb PCI/checkpatch: Deprecate DEFINE_PCI_DEVICE_TABLE
Prefer use of the direct definition of struct pci_device_id instead of
indirection via macro DEFINE_PCI_DEVICE_TABLE.

Update the PCI documentation to deprecate DEFINE_PCI_DEVICE_TABLE.  Update
checkpatch adding --fix option.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2013-12-13 11:36:22 -07:00
Yijing Wang a37bee7956 PCI: Update pci_find_slot() description in pci.txt
pci_find_slot() has been removed from the kernel.  Document its
closest replacement, pci_get_domain_bus_and_slot(), instead.

[bhelgaas: fix indentation, keep mention in "obsolete" section]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25 15:43:33 -06:00
Alexander Gordeev 08261d87f7 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
The new function pci_enable_msi_block_auto() tries to allocate
maximum possible number of MSIs up to the number the device
supports. It generalizes a pattern when pci_enable_msi_block()
is contiguously called until it succeeds or fails.

Opposite to pci_enable_msi_block() which takes the number of
MSIs to allocate as a input parameter,
pci_enable_msi_block_auto() could be used by device drivers to
obtain the number of assigned MSIs and the number of MSIs the
device supports.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c3de2419df94a0f95ca1a6f755afc421486455e6.1353324359.git.agordeev@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-24 17:25:13 +01:00
Greg Kroah-Hartman 63a29f744f Documentation: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from the kernel documentation.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Donald Dutile 2597ba763f PCI: SRIOV control and status via sysfs (documentation)
Add documentation of new sysfs files and new pci_driver SRIOV
configuration interface.

[bhelgaas: changelog]
Signed-off: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-28 11:25:47 -07:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Michael Witten 798c794df8 Docs: MSI-HOWTO: MSI -> MSIs
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:41 +00:00
Michael Witten c2b65e181a Docs: MSI-HOWTO: Insert a comma
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:40 +00:00
Michael Witten 1b8386f612 Docs: MSI-HOWTO: can -> could
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:39 +00:00
Michael Witten e6b85a1f8a Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:39 +00:00
Michael Witten 952df55b5a Docs: MSI-HOWTO: may -> might
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:37 +00:00
Michael Witten e14bd7e614 Docs: MSI-HOWTO: Insert a comma
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:37 +00:00
Michael Witten e6ffceb0de Docs: MSI-HOWTO: API -> function
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:36 +00:00
Michael Witten 5a84fc3162 Docs: MSI-HOWTO: , -> ;
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:36 +00:00
Michael Witten 6457d9b350 Docs: MSI-HOWTO: Move a sentence to another paragraph
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:35 +00:00
Michael Witten ed737c1882 Docs: MSI-HOWTO: Insert `that'
... as per Randy Dunlap's wishes :-P
Message-Id: <20110717114023.2b4cce91.rdunlap@xenotime.net>

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:34 +00:00
Michael Witten e4439236ef Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet' for emphasis
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:33 +00:00
Michael Witten 263d8d57b3 Docs: MSI-HOWTO: Put the `because' subordinate clause first
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:32 +00:00
Michael Witten 1d15afcc73 Docs: MSI-HOWTO: Streamline some wording
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:32 +00:00
Michael Witten a2d4d50128 Docs: MSI-HOWTO: `asked for' -> `requested'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:31 +00:00
Michael Witten 4979de6efb Docs: MSI-HOWTO: Use present tense and streamline some wording
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:31 +00:00
Michael Witten 891f692533 Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02 21:34:30 +00:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Kulikov Vasiliy fa964e1aab Documentation: pci.txt: fix typo
Doubled 'not'.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11 22:17:45 +02:00
Linus Torvalds 6109e2ce26 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits)
  PCI: hotplug: pciehp: Removed check for hotplug of display devices
  PCI: read memory ranges out of Broadcom CNB20LE host bridge
  PCI: Allow manual resource allocation for PCI hotplug bridges
  x86/PCI: make ACPI MCFG reserved error messages ACPI specific
  PCI hotplug: Use kmemdup
  PM/PCI: Update PCI power management documentation
  PCI: output FW warning in pci_read/write_vpd
  PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
  PCI quirks: disable msi on AMD rs4xx internal gfx bridges
  PCI: Disable MSI for MCP55 on P5N32-E SLI
  x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs
  PCI: aerdrv: trivial cleanup for aerdrv_core.c
  PCI: aerdrv: trivial cleanup for aerdrv.c
  PCI: aerdrv: introduce default_downstream_reset_link
  PCI: aerdrv: rework find_aer_service
  PCI: aerdrv: remove is_downstream
  PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS
  PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC
  PCI: aerdrv: rework do_recovery
  PCI: aerdrv: rework get_e_source()
  ...
2010-05-21 18:58:52 -07:00
Hidetoshi Seto 89713422a7 PCI: aerdrv: introduce default_downstream_reset_link
I noticed that when I inject a fatal error to an endpoint via
aer-inject, aer_root_reset() is called as reset_link for a
downstream port at upstream of the endpoint:

  pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401
   :
  pcieport 0000:52:02.0: Root Port link has been reset

It externally appears to be working, but internally issues some
accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for
root port so not available on downstream port.

This patch introduces default_downstream_reset_link that is
a version of aer_root_reset() with no accesses to root port's
register. It is used for downstream ports that has no reset_link
function its specific.

This patch also updates related description in pcieaer-howto.txt.
Some minor fixes are included.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:38 -07:00
Hidetoshi Seto d4dfd7278e PCI: aerdrv, doc: update example output in pcieaer-howto.txt
Follow new format.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:11 -07:00
Francis Galiegue a33f32244d Documentation/: it's -> its where appropriate
Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23 02:09:52 +02:00
FUJITA Tomonori 5e07c2c730 Documentation: rename PCI/PCI-DMA-mapping.txt to DMA-API-HOWTO.txt
This patch renames PCI/PCI-DMA-mapping.txt to DMA-API-HOWTO.txt.

The commit 51e7364ef2 "Documentation: rename
PCI-DMA-mapping.txt to DMA-API-HOWTO.txt" was supposed to do this but it
didn't.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:20 -07:00
FUJITA Tomonori 216bf58f40 Documentation: convert PCI-DMA-mapping.txt to use the generic DMA API
- replace the PCI DMA API (i.e. pci_dma_*) with the generic DMA API.

- make the document more generic (use the PCI specific explanation as
  an example).

[akpm@linux-foundation.org: fix things Randy noticed]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:43 -08:00
Kusanagi Kouichi 4207a152bc Documentation: Rename Documentation/DMA-mapping.txt
It seems that Documentation/DMA-mapping.txt was supposed to be renamed
to Documentation/PCI/PCI-DMA-mapping.txt.

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-02 10:09:44 -08:00
Mike Mason fe14acd4e7 PCI: document PCIe fundamental reset interfaces
The attached patch updates the Documentation/PCI/pci-error-recovery.txt
file with changes related to this new bit field, as well a few unrelated
updates.

Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Richard Lary <rlary@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:38 -07:00
Huang Ying c465def6bf PCI AER: software error injection
Debugging PCIE AER code can be very difficult because it is hard
to trigger various real hardware errors. This patch provide a
software based error injection tool, which can fake various PCIE
errors with a user space helper tool named "aer-inject". Which
can be gotten from:

  http://www.kernel.org/pub/linux/kernel/people/yhuang/

The patch fakes AER error by faking some PCIE AER related
registers and an AER interrupt for specified the PCIE device.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:30:14 -07:00
Zhang, Yanmin 28eb27cf08 PCI AER: support invalid error source IDs
When the bus id part of error source id is equal to 0 or nosourceid=1,
make the kernel probe the AER status registers of all devices under the
root port to find the initial error reporter.

Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:30:13 -07:00
Huang Ying bfe5a74017 PCI: PCIE AER: Document for PCIE AER software error injection
This patch adds a minimal HOWTO for PCIE AER software error injection
in Documentation/PCI/pcieaer-howto.txt.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:29:34 -07:00
Michael Ellerman fafad5bf06 PCI MSI: Add example request loop to MSI-HOWTO.txt
Encourage driver writers to think about supporting a variable number
of MSI-X interrupts, and give an example of how to do such a
request.

Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:35:04 -07:00
Yu Zhao 15b49bee3a PCI: manual for SR-IOV user and driver developer
Reviewed-by: Randy Dunlap <rdunlap@xenotime.net>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:33 -07:00
Matthew Wilcox 1c8d7b0a56 PCI MSI: Add support for multiple MSI
Add the new API pci_enable_msi_block() to allow drivers to
request multiple MSI and reimplement pci_enable_msi in terms of
pci_enable_msi_block.  Ensure that the architecture back ends don't
have to know about multiple MSI.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:14 -07:00
Matthew Wilcox c41ade2ee1 Rewrite MSI-HOWTO
I didn't find the previous version very useful, so I rewrote it.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Grant Grundler <grundler@parisc-linunx.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:11 -07:00
Alex Chiang a08f6e04d7 PCI: Documentation: fix minor PCIe HOWTO thinko
Update doc to correctly refer to replacing the pci_register_driver API,
and not the non-existent "pci_module_init" API.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 13:59:19 -08:00
Ben Hutchings 6a479079c0 PCI: Add pci_clear_master() as opposite of pci_set_master()
During an online device reset it may be useful to disable bus-mastering.
pci_disable_device() does that, and far more besides, so is not suitable
for an online reset.

Add pci_clear_master() which does just this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:23 -08:00
Randy Dunlap 31c00fc15e Create/use more directory structure in the Documentation/ tree.
Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2008-11-14 17:28:53 +00:00
Yu Zhao 270c66be9b PCI: fix AER capability check
The 'use pci_find_ext_capability everywhere' cleanup brought a new bug,
which makes the AER stop working.  Fix it by actually using find_ext_cap
instead of just find_cap.  Drop the unused config space size define while
we're at it.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 11:01:52 -07:00
Jean Delvare b41d6cf38e PCI: Check dynids driver_data value for validity
Only accept dynids whose driver_data value matches one of the driver's
pci_driver_id entries. This prevents the user from accidentally passing
values the drivers do not expect.

Cc: Milton Miller <miltonm@bga.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:48:35 -07:00
Randy Dunlap 4b5ff46923 PCI: doc/pci: create Documentation/PCI/ and move files into it
Create Documentation/PCI/ and move PCI-related files to it.
Fix a few instances of trailing whitespace.
Update references to the new file locations.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:46:51 -07:00