Use v4l2 control API helpers to support the events.
Fixes v4l2-compliance:
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If num_planes is different than zero num_planes and sizes must be
checked to support the format.
Fix the following v4l2-compliance error:
Buffer ioctls (Input 0):
fail: v4l2-test-buffers.cpp(717): q.create_bufs(node, 1, &fmt) != EINVAL
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a V4L2 driver for Renesas R-Car Image Signal Processor. The driver
supports the R-Car V3U SoC where the ISP IP sits between the R-Car CSI-2
receiver and VIN and filters the CSI-2 data based on VC/DT and directs
the video stream to different VIN IPs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.
This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.
The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go
The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sensor orientation is read from the _PLC ACPI buffer and converted to a v4l2
format.
The sensor rotation is read from the SSDB ACPI buffer and converted into
degrees.
Signed-off-by: Fabian Wüthrich <me@fabwu.ch>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Get the min buffer count required by FW from source event change
and use the same value to decide actual buffer count and for
buffer size calculation.
- Setup DPB and OPB buffers after session continue incase of
reconfig.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Set work route to FW based on num of vpp pipes.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
AON register programming is used to set NOC to low power mode
during V6 power off sequence. However AON register memory map
is not applicable to 1pipe, hence skipping AON register programming.
Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Co-developed-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V6 HW can have vpp pipes as 1 or 4, add num_vpp_pipes
to resource struture to differentiate.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In existing video driver implementation vpp frequency calculation in
calculate_inst_freq() is always zero because the value of vpp_freq_per_mb
is always zero for decoder.
Fixed this by correcting the calculating the vpp frequency calculation for
decoder.
Fixes: 3cfe5815ce ("media: venus: Enable low power setting for encoder")
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Video driver maintains an internal context for the output buffer size.
During S_fmt() on capture plane, the output buffer size is not updated
in driver context. As a result, during buf_prepare(), the size of the
vb2_plane and internal size of the buffer, as maintained by the driver,
does not match. This leads to buf_prepare() failure.
Update the instance context for the output buffer size during s_fmt().
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In current video driver implementation in calculate_inst_freq()
frequency is calculated based on filled_len. The filled_len may
vary frame to frame, because of this in load_scale_v4() since
frequency is calculated for all instances, driver is throwing
false warning like "HW is overloaded".
Hence to handle this, changed log level to low log message. Since the
actual session rejection is happening in decide_core() based on
load.
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
gcc notices that the driver mixes 'dma_addr_t' 'u8 *' and 'u32'
to store DMA addresses:
drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_vb2_prepare':
drivers/media/platform/omap/omap_vout.c:979:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
vout->queued_buf_addr[vb->index] = (u8 *)buf_phy_addr;
^
drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_create_video_devices':
drivers/media/platform/omap/omap_vout.c:1479:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
vout->fbuf.base = (void *)info.paddr;
Use dma_addr_t everywhere here to avoid the type conversions and document
what the address is used for. Assigning to vout->fbuf.base still requires
a cast, since that is part of the driver independent data structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V3U provides two VSPD instances, with a new update to the version
register to detect the new SoC.
Add the new version and model detection, and detail the features
available in this module.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In commit 6732f31393 ("media: v4l: vsp1: Fix uif null pointer access")
the handling of the UIF was over complicated, and the patch applied
before review.
Simplify it to keep the conditionals small.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The WPF IRQ enable and status macros have been incorrectly named WFP.
Fix them accordingly, and update all uses of the macros.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove soft reset between frames, which was merely a workaround,
actually replace it with something less aggressive: clearing of jpeg stream
buffer pointer, via STM_CTRL[BITBUF_PTR_CLR].
According to the reference manual, the BITBUF_PTR_CLR is performed on
context switch, but, per hardware team recommendation, it is also working
without context switch, which is the case for this driver, for now.
Without soft reset and without BITBUF_PTR_CLR, successive encoding jobs
continue from where the previous left off, basically writing past the
v4l2 buffer.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add some body to the dummy jpeg used to inject a default DHT.
Use jpeg_image_red as compressed image data, insert it at the
end of SOS, before EOI.
The pure dummy jpeg was occasionally not working well on
8qxp C0.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set recommend min/max bitrate range for MT8173 h264/vp8 encoder.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Keep all of the CEC menu items grouped together.
By grouping all of these menu entries inside a menu/endmenu block,
they are forced to be kept together and they are displayed/presented
in a group for users.
Tested with xconfig, gconfig, menuconfig, and nconfig.
Fixes: 46d2a3b964 ("media: place CEC menu before MEDIA_SUPPORT")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Preserve the error code stored in "dev->kthread_cec" before setting it
to NULL.
Fixes: 439e520995ab ("media: vivid: add signal-free time for cec message xfer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The call to ops->suspend for the dev->dev_next case can currently
trigger a call on a null function pointer if ops->suspend is null.
Skip over the use of function ops->suspend if it is null.
Addresses-Coverity: ("Dereference after null check")
Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The access to the internal storage of the format rcar_csi2.mf should be
serialized, extend the existing lock mutex to also cover this.
While at it document the mutex.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The switch of jpeg 420/444 subsampling will update full jpeg header for
aspeed now.
Just update the 420/444 subsampling part of jpeg header is fine.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If rcsi2_code_to_fmt() return NULL, then null pointer dereference occurs
in the next cycle. That should not be possible now but adding checking
protects from future bugs.
The patch adds checking if format is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the IR Toy is receiving IR while a transmit is done, it may end up
hanging. We can prevent this from happening by re-entering sample mode
just before issuing the transmit command.
Link: https://github.com/bengtmartensson/HarcHardware/discussions/25
Cc: stable@vger.kernel.org
[mchehab: renamed: s/STATE_RESET/STATE_COMMAND_NO_RESP/ ]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The use of a macro named 'RST' conflicts with one of the same name
in arch/mips/include/asm/mach-rc32434/rb.h. This causes build
warnings on some MIPS builds.
Change the names of the JPEG marker constants to be in their own
namespace to fix these build warnings and to prevent other similar
problems in the future.
Fixes these build warnings:
In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:14:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
43 | #define RST 0xd0
|
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:13:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
43 | #define RST 0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c:12:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
43 | #define RST 0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
In file included from ../drivers/media/platform/s5p-jpeg/jpeg-core.c:31:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
43 | #define RST 0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
Also update the kernel-doc so that the word "marker" is not
repeated.
Link: https://lore.kernel.org/linux-media/20210907044022.30602-1-rdunlap@infradead.org
Fixes: bb677f3ac4 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Syzkaller reported a warning called "rcu detected stall in dummy_timer".
The error seems to be an error in mceusb_dev_recv(). In the case of
-EPROTO error, the routine immediately resubmits the URB. Instead it
should return without resubmitting URB.
Reported-by: syzbot+4d3749e9612c2cfab956@syzkaller.appspotmail.com
Signed-off-by: Rajat Asthana <rajatasthana4@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.
Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:
dvb_usbv2_init()
dvb_usbv2_adapter_init()
dvb_usbv2_adapter_frontend_init()
props->frontend_attach()
props->init()
Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.
Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com
Fixes: 8572211842 ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
./drivers/media/rc/meson-ir-tx.c:398:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This causes the same urb to resubmitted continuously, hogging up a cpu.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After sending the start transmit command, the device is supposed to
respond with the length of the buffer which can be sent. There might
be some residual ir data there.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The IR receiver has two issues:
- Sometimes there is no response to a button press
- Sometimes a button press is repeated when it should not have been
Hanging the polling interval fixes this behaviour.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=994050
Cc: stable@vger.kernel.org
Suggested-by: Joaquín Alberto Calderón Pozo <kini_calderon@hotmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The runtime enabling of the ISPCK (internally clocks the pipeline inside
the ISC) has to be done after the pm_runtime for the ISC dev has been
started.
After the commit by Mauro:
the ISC failed to probe with the error:
atmel-sama5d2-isc f0008000.isc: failed to enable ispck: -13
atmel-sama5d2-isc: probe of f0008000.isc failed with error -13
This is because the enabling of the ispck is done too early in the probe,
and the PM runtime returns invalid request.
Thus, moved this clock enabling after pm_runtime_idle is called.
The ISPCK is required only for sama5d2 type of ISC.
Thus, add a bool inside the isc struct that is platform dependent.
For the sama7g5-isc, the enabling of the ISPCK is wrong and does not make
sense. Removed it from the sama7g5 probe. In sama7g5-isc, there is only
one clock, the MCK, which also clocks the internal pipeline of the ISC.
Adapted the clk_prepare and clk_unprepare to request the runtime PM
for both clocks (MCK and ISPCK) in case of sama5d2-isc, and the single
clock (MCK) in case of sama7g5-isc.
Fixes: dd97908ee3 ("media: atmel: properly get pm_runtime")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently a call to snd_card_new that fails will set card with a NULL
pointer, this causes a null pointer dereference on the error cleanup
path when card it passed to snd_card_free. Fix this by adding a new
error exit path that does not call snd_card_free and exiting via this
new path.
Addresses-Coverity: ("Explicit null dereference")
Fixes: 9e44d63246 ("[media] cx23885: Add ALSA support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Trident TVMaster TM5600/6000/60".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: e28f49b0b2 ("V4L/DVB: tm6000: fix some info messages")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Silicon Labs Si470x FM Radio Re".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 78656acdcf ("V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers")
Fixes: cc35bbddfe ("V4L/DVB (12416): radio-si470x: add i2c driver for si470x")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Texas Instruments Wl1273 FM Rad".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 87d1a50ce4 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without this, I see a randconfig link failure:
aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_remove':
rcar_drif.c:(.text+0x2a8): undefined reference to `v4l2_async_notifier_unregister'
aarch64-linux-ld: rcar_drif.c:(.text+0x2b0): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_sdr_probe':
rcar_drif.c:(.text+0x1444): undefined reference to `v4l2_async_notifier_init'
aarch64-linux-ld: rcar_drif.c:(.text+0x14a0): undefined reference to `v4l2_async_notifier_register'
aarch64-linux-ld: rcar_drif.c:(.text+0x14d8): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: rcar_drif.c:(.text+0x15a8): undefined reference to `__v4l2_async_notifier_add_fwnode_subdev'
I could not easily figure out when this was introduced, as this code
has not changed in a while but I only saw the problem recently.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the scaler subdevice to accept setting the resolution of the source
pad (previously the source resolution would always be 3 times the sink for
both dimensions). Now any resolution can be set at src (even smaller ones)
and the sink video will be scaled to match it.
Test example: With the vimc module up (using the default vimc topology)
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
--stream-to=test.raw
The result will be a cropped stream that can be checked with the command
ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
-video_size "300x700" test.raw
Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Pedro Terra <pedro@terraco.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When adding an internal scratch buffer to improve buffer handling when
stopping it was also erroneously used when syncing at capture start.
This led to that the first three buffers captured were always dropped
as they were captured in the scratch buffer instead of in a buffer
provided by the user.
Allow the hardware to be given user provided buffers when preparing for
capture in the stopped state. This still allows the driver to sync with
the hardware and always completes the buffers to user-space in the
correct order as no buffers are completed before the sync is complete.
This change improves the driver as buffers are completed and given to
the user three frames earlier than before.
The change also fixes a warning produced by v4l2-compliance,
warn: v4l2-test-buffers.cpp(448): got sequence number 3, expected 0
[hverkuil: fixed some typos in the Subject and the log message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pointer t is being assigned a value that is never read, it is being
updated later on inside the for-loop. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Previously it was possible, but a recent fix for uninitialized
`ret` variable broke this behavior.
v4l2_fh_is_singular_file() check is there just to determine
whether the power needs to be enabled, and it's not a failure
if it returns false.
Fixes: ba9139116b ("media: sun6i-csi: add a missing return code")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the build errors reported by the kernel test robot by
selecting V4L2_ASYNC:
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
ths8200.c:(.text+0x404): undefined reference to `v4l2_async_register_subdev'
Fixes: ed29f89497 ("media: i2c: ths8200: support asynchronous probing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver takes "osd_xres" and "osd_yres" as module parameters and
caps the upper bounds but it doesn't cap the lower bounds. Obviously
the admin is not going to enter negative resolutions but the possibility
makes static analysis more difficult.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use usb_get_dev() to increment the reference count of the usb device
structure in order to avoid releasing the structure while it is still in
use. And use usb_put_dev() to decrement the reference count and thus,
when it will be equal to 0 the structure will be released.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
MLX90640 should ideally be working without a frame skip.
In short, if a frame is skipped, then half of a frame loses correction
information, having no way to retrieve its original compensation.
This patch improves the timing in three ways:
1) Replaced schedule_timeout_interruptible() to usleep_range()
The former "only ensures that it will sleep for at least
schedule_delay (if not interrupted)", as pointed out by mchehab.
As a result, the frame rate could lag behind than the actual capability
of the hardware
(Raspberry Pi would show a few Hz slower than set value)
2) Calculation based on us, not jiffies
Jiffies usually has resolution of 100Hz, and possibly even cruder.
MLX90640 can go up to 64Hz frame rate, which does not make sense to
calculate the interval with aforementioned resolution.
3) Interval calculation based on the last frame's end time
Using the start time of the current frame will probably make tiny bit
of drift every time. This made more sense when I didn't realize 1),
but it still makes sense without adding virtually any complexity,
so this stays in.
Signed-off-by: Seongyong Park <euphoriccatface@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This adds support for the new noncontiguous DMA API, which
requires allocators to have two execution branches: one
for the current API, and one for the new one.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch lets user-space request a non-coherent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one byte of a 4 byte ->reserved[1] member of struct
v4l2_requestbuffers. The struct, thus, now has reserved 3 bytes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Preparations for future V4L2_MEMORY_FLAG_NON_COHERENT support.
Extend the vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory coherency configuration.
An attempt to allocate a buffer with coherency requirements
that do not match the queue's consistency model will fail.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This moves cache hints handling from the videobuf2 core down
to the allocator's level, because allocators do the sync/flush
caches eventually and may take better decisions. Besides,
allocators already decide whether cache sync/flush should
be done or can be skipped. This patch moves the scattered
buffer cache sync logic to one common place.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 is not the perfect place to manage vb2 buffer cache hints.
It works for V4L2 users, but there are backends that use vb2 core
and don't use V4L2. Factor out buffer cache hints initialisation
and call it when we allocate vb2 buffer.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It would be less error prone if the default cache hints value
(we kzalloc() structs, so it's zeroed out by default) would be
to "always sync/flush" caches. Inverse and rename cache hints
flags.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the new DMA API we need an extension of the videobuf2 API.
Previously, videobuf2 core would set the non-coherent DMA bit
in the vb2_queue dma_attr field (if user-space would pass a
corresponding memory hint); the vb2 core then would pass the
vb2_queue dma_attrs to the vb2 allocators. The vb2 allocator
would use the queue's dma_attr and the DMA API would allocate
either coherent or non-coherent memory.
But we cannot do this anymore, since there is no corresponding DMA
attr flag and, hence, there is no way for the allocator to become
aware of what type of allocation user-space has requested. So we
need to pass more context from videobuf2 core to the allocators.
Fix this by changing the call_ptr_memop() macro to pass the
vb2 pointer to the corresponding op callbacks.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vfe->ops->hw_version(vfe) is being called before vfe->base has been
assigned, and before the hardware has been powered up.
Fixes: b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Limit frame size to what userland code expects. This can happen when
cameras, such as Kensington VideoCAM, use fixed sized transfer packets
which includes trailing junk in the final packet.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the vivid emulation of cec message transmission does not force
adapters to wait until the cec bus has been signal-free for a certain
number of bit periods before transmitting or re-transmitting a message.
Without enforcing the signal-free time requirements, adapters do not share
the bus very well and some messages are sent too quickly while other
messages are lost. By emulating a signal-free time and forcing adapters
to wait their turn to transmit, the vivid emulation of cec transmission
is much more reliable.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Request API is currently used and specified as part of the
Memory-to-memory Stateless Video Decoder Interface [1].
This can now be considered as non-experimental and stable, given
the decoder API has been used by products since a couple years,
supported by several drivers and userspace frameworks,
[1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a
corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling
path of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes: 3003a180ef ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this representative problem
camss-vfe-4-1.c:333: The result of the left shift is undefined because
the left operand is negative
reg |= (height - 1) << 4;
~~~~~~~~~ ^
The is a false positive. height is set in vfe_get_wm_sizes() which
has a switch statement without a default.
Reviewing the switch, the cases contain redundant assignments.
So simplify to assignments.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After urb was freed, the pointer and counter need to be
cleaned.
Signed-off-by: Nil Yi <teroincn@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this representative problem
tda1997x.c:1939: warning: 7th function call argument is an uninitialized
value
The 7th argument is buffer[0], which is set in the earlier call to
io_readn(). When io_readn() call to io_read() fails with the first
read, buffer[0] is not set and 0 is returned and stored in len.
The later call to hdmi_infoframe_unpack()'s size parameter is the
static size of buffer, always 40, so a short read is not caught
in hdmi_infoframe_unpacks()'s checking. The variable len should be
used instead.
Zero initialize buffer to 0 so it is in a known start state.
Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If of_device_get_match_data() return NULL,
then null pointer dereference occurs in s5p_mfc_init_pm().
The patch adds checking if dev->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CEC pin framework has to wait for the CEC bus to be idle for the
requested Signal Free Time before it can start a transmit.
However, the check for that was off by one, so transmits would start one
bit period (2.4ms) too late.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is
checked in:
if (!dev->plat_dev)
This indicates both dev->plat_dev and pdev can be NULL. If so, the
function dev_err() is called to print error information.
dev_err(&pdev->dev, "No platform data specified\n");
However, &pdev->dev is an illegal address, and it is dereferenced in
dev_err().
To fix this possible null-pointer dereference, replace dev_err() with
mfc_err().
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As partially addressed in commit 65d270acb2 ("media: aspeed: clear
garbage interrupts"), the ASpeed video engine sometimes asserts
interrupts that the driver hasn't enabled. In addition to the
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts dealt with in that
patch, COMP_READY has also been observed. Instead of playing
whack-a-mole with each one individually, we can instead just blanket
ignore everything we haven't explicitly enabled.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bounds checking in avc_ca_pmt() is not strict enough. It should
be checking "read_pos + 4" because it's reading 5 bytes. If the
"es_info_length" is non-zero then it reads a 6th byte so there needs to
be an additional check for that.
I also added checks for the "write_pos". I don't think these are
required because "read_pos" and "write_pos" are tied together so
checking one ought to be enough. But they make the code easier to
understand for me. The check on write_pos is:
if (write_pos + 4 >= sizeof(c->operand) - 4) {
The first "+ 4" is because we're writing 5 bytes and the last " - 4"
is to leave space for the CRC.
The other problem is that "length" can be invalid. It comes from
"data_length" in fdtv_ca_pmt().
Cc: stable@vger.kernel.org
Reported-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Macros should not use a trailing semicolon，and it was used
the semicolon after macro cam_dbg called in viacam_vb2_prepare,
so deleted these redundant semicolons.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case vb2ops_venc_start_streaming fails, the error value
is overwritten by the ret value of pm_runtime_put which might
be 0. Fix it.
Fixes: 985c73693f (" media: mtk-vcodec: Separating mtk encoder driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It looks like that memcpy() is a superfluous operation in
parse_token()/parse_mtoken(). Simple these two functions and
use kstrtoint() instead of simple_strtol() to avoid data
overflow.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vidtv_bridge_remove() releases and cleans up everything except for dvb
itself. The patch adds this missed release.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda