JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We do a bforget and return for no journal case, so let's remove this
conflict comment.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Link: https://lore.kernel.org/r/20210714055940.1553705-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a writeback of the superblock fails with an I/O error, the buffer
is marked not uptodate. However, this can cause a WARN_ON to trigger
when we attempt to write superblock a second time. (Which might
succeed this time, for cerrtain types of block devices such as iSCSI
devices over a flaky network.)
Try to detect this case in flush_stashed_error_work(), and also change
__ext4_handle_dirty_metadata() so we always set the uptodate flag, not
just in the nojournal case.
Before this commit, this problem can be repliciated via:
1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096'
2. mount /dev/mapper/dust1 /home/test
3. dmsetup message dust1 0 addbadblock 0 10
4. cd /home/test
5. echo "XXXXXXX" > t
After a few seconds, we got following warning:
[ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0
[ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata
[ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0
[ 91.417038] ------------[ cut here ]------------
[ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e
[ 91.440322] Call Trace:
[ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220
[ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90
[ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0
[ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240
[ 91.443336] ? put_prev_entity+0x2a/0x200
[ 91.443856] ? kjournald2+0x12e/0x510
[ 91.444324] kjournald2+0x12e/0x510
[ 91.444773] ? woken_wake_function+0x30/0x30
[ 91.445326] kthread+0x150/0x1b0
[ 91.445739] ? commit_timeout+0x20/0x20
[ 91.446258] ? kthread_flush_worker+0xb0/0xb0
[ 91.446818] ret_from_fork+0x1f/0x30
[ 91.447293] ---[ end trace 66f0b6bf3d1abade ]---
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only difference between __ext4_abort() and __ext4_error() is that
the former one ignores errors=continue mount option. Unify the code to
reduce duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is a risk of filesystem inconsistency if we failed to async write
back metadata buffer in the background. Because of current buffer's end
io procedure is handled by end_buffer_async_write() in the block layer,
and it only clear the buffer's uptodate flag and mark the write_io_error
flag, so ext4 cannot detect such failure immediately. In most cases of
getting metadata buffer (e.g. ext4_read_inode_bitmap()), although the
buffer's data is actually uptodate, it may still read data from disk
because the buffer's uptodate flag has been cleared. Finally, it may
lead to on-disk filesystem inconsistency if reading old data from the
disk successfully and write them out again.
This patch detect bdev mapping->wb_err when getting journal's write
access and mark the filesystem error if bdev's mapping->wb_err was
increased, this could prevent further writing and potential
inconsistency.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200620025427.1756360-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix the following gcc warning:
fs/ext4/ext4_jbd2.c:341:30: warning: variable 'es' set but not used [-Wunused-but-set-variable]
struct ext4_super_block *es;
^~
Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200402034759.29957-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Writeback errors can leave buffer in not up-to-date state when there
are errors during background writes. Force buffer up-to-date while
marking it dirty.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20191224190940.157952-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Determining an inode's journaling mode has gotten more complicated over
time. Move ext4_inode_journal_mode() from an inline function into
ext4_jbd2.c to reduce the compiled code size.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191209233602.117778-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This allows the cause of an ext4_error() report to be categorized
based on whether it was triggered due to an I/O error, or an memory
allocation error, or other possible causes. Most errors are caused by
a detected file system inconsistency, so the default code stored in
the superblock will be EXT4_ERR_EFSCORRUPTED.
Link: https://lore.kernel.org/r/20191204032335.7683-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
So far we have reserved only relatively high fixed amount of revoke
credits for each transaction. We over-reserved by large amount for most
cases but when freeing large directories or files with data journalling,
the fixed amount is not enough. In fact the worst case estimate is
inconveniently large (maximum extent size) for freeing of one extent.
We fix this by doing proper estimate of the amount of blocks that need
to be revoked when removing blocks from the inode due to truncate or
hole punching and otherwise reserve just a small amount of revoke
credits for each transaction to accommodate freeing of xattrs block or
so.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extend functions for starting, extending, and restarting transaction
handles to take number of revoke records handle must be able to
accommodate. These functions then make sure transaction has enough
credits to be able to store resulting revoke descriptor blocks. Also
revoke code tracks number of revoke records created by a handle to catch
situation where some place didn't reserve enough space for revoke
records. Similarly to standard transaction credits, space for unused
reserved revoke records is released when the handle is stopped.
On the ext4 side we currently take a simplistic approach of reserving
space for 1024 revoke records for any transaction. This grows amount of
credits reserved for each handle only by a few and is enough for any
normal workload so that we don't hit warnings in jbd2. We will refine
the logic in following commits.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-20-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide accessor function to get number of credits available in a handle
and use it from ext4. Later, computation of available credits won't be
so straightforward.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide ext4_journal_ensure_credits_fn() function to ensure transaction
has given amount of credits and call helper function to prepare for
restarting a transaction. This allows to remove some boilerplate code
from various places, add proper error handling for the case where
transaction extension or restart fails, and reduces following changes
needed for proper revoke record reservation tracking.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext4 forced shutdown flag needs to prevent new handles from being
started, but it needs to allow existing handles to complete. So the
forced shutdown flag should not force ext4_journal_get_write_access to
fail.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
There is a use-after-free possibility in __ext4_journal_stop() in the
case that we free the handle in the first jbd2_journal_stop() because
we're referencing handle->h_err afterwards. This was introduced in
9705acd63b and it is wrong. Fix it by
storing the handle->h_err value beforehand and avoid referencing
potentially freed handle.
Fixes: 9705acd63b
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Currently when journal restart fails, we'll have the h_transaction of
the handle set to NULL to indicate that the handle has been effectively
aborted. We handle this situation quietly in the jbd2_journal_stop() and just
free the handle and exit because everything else has been done before we
attempted (and failed) to restart the journal.
Unfortunately there are a number of problems with that approach
introduced with commit
41a5b91319 "jbd2: invalidate handle if jbd2_journal_restart()
fails"
First of all in ext4 jbd2_journal_stop() will be called through
__ext4_journal_stop() where we would try to get a hold of the superblock
by dereferencing h_transaction which in this case would lead to NULL
pointer dereference and crash.
In addition we're going to free the handle regardless of the refcount
which is bad as well, because others up the call chain will still
reference the handle so we might potentially reference already freed
memory.
Moreover it's expected that we'll get aborted handle as well as detached
handle in some of the journalling function as the error propagates up
the stack, so it's unnecessary to call WARN_ON every time we get
detached handle.
And finally we might leak some memory by forgetting to free reserved
handle in jbd2_journal_stop() in the case where handle was detached from
the transaction (h_transaction is NULL).
Fix the NULL pointer dereference in __ext4_journal_stop() by just
calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix
the potential memory leak in jbd2_journal_stop() and use proper
handle refcounting before we attempt to free it to avoid use-after-free
issues.
And finally remove all WARN_ON(!transaction) from the code so that we do
not get random traces when something goes wrong because when journal
restart fails we will get to some of those functions.
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix up error messages printed when the transaction pointers in a
journal head are inconsistent. This improves the error messages which
are printed when running xfstests generic/068 in data=journal mode.
See the bug report at: https://bugzilla.kernel.org/show_bug.cgi?id=60786
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While it's true that errors can only happen if there is a bug in
jbd2_journal_dirty_metadata(), if a bug does happen, we need to halt
the kernel or remount the file system read-only in order to avoid
further data loss. The ext4_journal_abort_handle() function doesn't
do any of this, and while it's likely that this call (since it doesn't
adjust refcounts) will likely result in the file system eventually
deadlocking since the current transaction will never be able to close,
it's much cleaner to call let ext4's error handling system deal with
this situation.
There's a separate bug here which is that if certain jbd2 errors
errors occur and file system is mounted errors=continue, the file
system will probably eventually end grind to a halt as described
above. But things have been this way in a long time, and usually when
we have these sorts of errors it's pretty much a disaster --- and
that's why the jbd2 layer aggressively retries memory allocations,
which is the most likely cause of these jbd2 errors.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
When jbd2_journal_dirty_metadata() returns error,
__ext4_handle_dirty_metadata() stops the handle. However callers of this
function do not count with that fact and still happily used now freed
handle. This use after free can result in various issues but very likely
we oops soon.
The motivation of adding __ext4_journal_stop() into
__ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to
improve error reporting. So replace __ext4_journal_stop() with
ext4_journal_abort_handle() which was there before that commit and add
WARN_ON_ONCE() to dump stack to provide useful information.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.2+
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues. It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing. Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This allows metadata writebacks which are issued via block device
writeback to be sent with the current write request flags.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the jbd2 wrapper functions which start and stop handles out of
super.c, where they don't really logically belong, and into
ext4_jbd2.c.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_handle_dirty_super() was calculating the superblock
on the wrong block data. As a result, when the superblock is modified
while it is mounted (most commonly, when inodes are added or removed
from the orphan list), the superblock checksum would be wrong. We
didn't notice because the superblock *was* being correctly calculated
in ext4_commit_super(), and this would get called when the file system
was unmounted. So the problem only became obvious if the system
crashed while the file system was mounted.
Fix this by removing the poorly designed function signature for
ext4_superblock_csum_set(); if it only took a single argument, the
pointer to a struct superblock, the ambiguity which caused this
mistake would have been impossible.
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The '__ext4_handle_dirty_metadata()' does not need the 'now' argument
anymore and we can kill it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This patch changes the 'ext4_handle_dirty_super()' function which
submits the superblock for I/O in the following cases:
1. When creating the first large file on a file system without
EXT4_FEATURE_RO_COMPAT_LARGE_FILE feature.
2. When re-sizing the file-system.
3. When creating an xattr on a file-system without the
EXT4_FEATURE_COMPAT_EXT_ATTR feature.
If the file-system has journal enabled, the superblock is written via
the journal. We do not modify this path.
If the file-system has no journal, this function, falls back to just
marking the superblock as dirty using the 's_dirt' superblock
flag. This means that it delays the actual superblock I/O submission
by 5 seconds (default setting). Namely, the 'sync_supers()' kernel
thread will call 'ext4_write_super()' later and will actually submit
the superblock for I/O.
And this is the behavior this patch modifies: we stop using 's_dirt'
and just mark the superblock buffer as dirty right away. Indeed, all 3
cases above are extremely rare and it does not add any value to delay
the I/O submission for them.
Note: 'ext4_handle_dirty_super()' executes
'__ext4_handle_dirty_super()' with 'now = 0'. This patch basically
makes the 'now' argument unneeded and it will be deleted in one of the
next patches.
This patch also removes 's_dirt' condition on the unmount path because
we never set it anymore, so we should not test it.
Tested using xfstests for both journalled and non-journalled ext4.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Calculate and verify the superblock checksum. Since the UUID and
block group number are embedded in each copy of the superblock, we
need only checksum the entire block. Refactor some of the code to
eliminate open-coding of the checksum update call.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add debugging information in case jbd2_journal_dirty_metadata() is
called with a buffer_head which didn't have
jbd2_journal_get_write_access() called on it, or if the journal_head
has the wrong transaction in it. In addition, return an error code.
This won't change anything for ocfs2, which will BUG_ON() the non-zero
exit code.
For ext4, the caller of this function is ext4_handle_dirty_metadata(),
and on seeing a non-zero return code, will call __ext4_journal_stop(),
which will print the function and line number of the (buggy) calling
function and abort the journal. This will allow us to recover instead
of bug halting, which is better from a robustness and reliability
point of view.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The block allocation code used to use jbd2_journal_get_undo_access as
a way to make changes that wouldn't show up until the commit took
place. The new multi-block allocation code has a its own way of
preventing newly freed blocks from getting reused until the commit
takes place (it avoids updating the buddy bitmaps until the commit is
done), so we don't need to use jbd2_journal_get_undo_access(), which
has extra overhead compared to jbd2_journal_get_write_access().
There was one last vestigal use of ext4_journal_get_undo_access() in
ext4_add_groupblocks(); change it to use ext4_journal_get_write_access()
and then remove the ext4_journal_get_undo_access() support.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Save number of file system errors, and the time function name, line
number, block number, and inode number of the first and most recent
errors reported on the file system in the superblock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't need to set s_dirt in most of the ext4 code when journaling
is enabled. In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted. As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt. There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.
This patch will optimize out some unneeded disk writes when using ext4
with a journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calls to ext4_handle_dirty_metadata should only pass in an inode
pointer for inode-specific metadata, and not for shared metadata
blocks such as inode table blocks, block group descriptors, the
superblock, etc.
The BUG_ON can get tripped when updating a special device (such as a
block device) that is opened (so that i_mapping is set in
fs/block_dev.c) and the file system is mounted in no journal mode.
Addresses-Google-Bug: #2404870
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.
I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the last two callers of ext4_journal_forget() to use
ext4_forget() instead, and then fold ext4_journal_forget() into
ext4_forget(). This reduces are code complexity and shortens our call
stack.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The only caller of ext4_journal_revoke() is ext4_forget(), so we can
fold ext4_journal_revoke() into ext4_forget() to simplify the code and
shorten the call stack.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ye Bin