When CONFIG_EXPOLINE_EXTERN is used expoline thunks are generated
from arch/s390/lib/expoline.S and postlinked into every module.
This is also true for external modules. Add expoline.o build to
the modules_prepare target.
Fixes: 1d2ad08480 ("s390/nospec: add an option to use thunk-extern")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: C. Erastus Toe <ctoe@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/patch-1.thread-d13b6c.git-a2387a74dc49.your-ad-here.call-01656331067-ext-4899@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
These two error paths should clean up before returning.
Fixes: 2bb4b98b60 ("net: stmmac: Add Ingenic SoCs MAC support.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.
Fixes: 39bfab8844 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Roun).
This series fixes data-races around the first 13 knobs and
nexthop_compat_mode in ipv4_net_table.
I will post another patch for three early_demux knobs later,
so the next round will start from ip_default_ttl.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading nexthop_compat_mode, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 4f80116d3d ("net: ipv4: add sysctl for nexthop api compatibility mode")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn_fallback, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 492135557d ("tcp: add rfc3168, section 6.1.1.1. fallback")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 6897445fb1 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1c2fb7f93c ("[IPV4]: Sysctl configurable icmp error source address.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ignore_bogus_error_responses, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_broadcasts, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3 ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_all, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_max_tw_buckets, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb94441306 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the regulator_get_optional() call for the SRAM regulator returns
a probe deferral, we must bail out and retry probing later: failing
to do this will produce unstabilities on platforms requiring the
handling for this regulator.
Fixes: ffa7bdf7f3 ("cpufreq: mediatek: Make sram regulator optional")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
x86_has_pat_wp() is using a wrong test, as it relies on the normal
PAT configuration used by the kernel. In case the PAT MSR has been
setup by another entity (e.g. Xen hypervisor) it might return false
even if the PAT configuration is allowing WP mappings. This due to the
fact that when running as Xen PV guest the PAT MSR is setup by the
hypervisor and cannot be changed by the guest. This results in the WP
related entry to be at a different position when running as Xen PV
guest compared to the bare metal or fully virtualized case.
The correct way to test for WP support is:
1. Get the PTE protection bits needed to select WP mode by reading
__cachemode2pte_tbl[_PAGE_CACHE_MODE_WP] (depending on the PAT MSR
setting this might return protection bits for a stronger mode, e.g.
UC-)
2. Translate those bits back into the real cache mode selected by those
PTE bits by reading __pte2cachemode_tbl[__pte2cm_idx(prot)]
3. Test for the cache mode to be _PAGE_CACHE_MODE_WP
Fixes: f88a68facd ("x86/mm: Extend early_memremap() support with additional attrs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14
Link: https://lore.kernel.org/r/20220503132207.17234-1-jgross@suse.com
The build on x86_32 currently fails after commit
9bb2ec608a (objtool: Update Retpoline validation)
with:
arch/x86/kernel/../../x86/xen/xen-head.S:35: Error: no such instruction: `annotate_unret_safe'
ANNOTATE_UNRET_SAFE is defined in nospec-branch.h. And head_32.S is
missing this include. Fix this.
Fixes: 9bb2ec608a ("objtool: Update Retpoline validation")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/63e23f80-033f-f64e-7522-2816debbc367@kernel.org
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yang Jihing reported a race between perf_event_set_output() and
perf_mmap_close():
CPU1 CPU2
perf_mmap_close(e2)
if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0
detach_rest = true
ioctl(e1, IOC_SET_OUTPUT, e2)
perf_event_set_output(e1, e2)
...
list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry)
ring_buffer_attach(e, NULL);
// e1 isn't yet added and
// therefore not detached
ring_buffer_attach(e1, e2->rb)
list_add_rcu(&e1->rb_entry,
&e2->rb->event_list)
After this; e1 is attached to an unmapped rb and a subsequent
perf_mmap() will loop forever more:
again:
mutex_lock(&e->mmap_mutex);
if (event->rb) {
...
if (!atomic_inc_not_zero(&e->rb->mmap_count)) {
...
mutex_unlock(&e->mmap_mutex);
goto again;
}
}
The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach
in perf_event_set_output() holds e1->mmap_mutex. As such there is no
serialization to avoid this race.
Change perf_event_set_output() to take both e1->mmap_mutex and
e2->mmap_mutex to alleviate that problem. Additionally, have the loop
in perf_mmap() detach the rb directly, this avoids having to wait for
the concurrent perf_mmap_close() to get around to doing it to make
progress.
Fixes: 9bb5d40cd9 ("perf: Fix mmap() accounting hole")
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net
The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.
-----BEGIN PGP SIGNATURE-----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=APeV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GNqz
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixe for 5.19
The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.
* tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974: re-add missing pinctrl
Link: https://lore.kernel.org/r/20220713030627.1371156-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.19, please pull the following:
- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
necessary for booting, and fixes the BCM4908 DTS to have a proper
'enable-method' and 'cpu-release-addr' properties for the kernel to boot
when using u-boot
-----BEGIN PGP SIGNATURE-----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=iorV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SOlL
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.19, please pull the following:
- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
necessary for booting, and fixes the BCM4908 DTS to have a proper
'enable-method' and 'cpu-release-addr' properties for the kernel to boot
when using u-boot
* tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
Link: https://lore.kernel.org/r/20220712231222.97850-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple
motherboard design and they are using different subsystem ID of audio
codec. Add the same quirk for other MBs.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Those two product ids are known.
Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Michael Chan says:
====================
bnxt_en: 5 Bug fixes
This patchset fixes various issues, including SRIOV error unwinding,
one error recovery path, live patch reporting, XDP transmit path,
and PHC clock reading.
====================
Link: https://lore.kernel.org/r/1657592778-12730-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The upper 32-bit PHC register is not latched when reading the lower
32-bit PHC register. Current code leaves a small window where we may
not read correct higher order bits if the lower order bits are just about
to wrap around.
This patch fixes this by reading higher order bits twice and makes
sure that final value is correctly paired with its lower 32 bits.
Fixes: 30e96f487f ("bnxt_en: Do not read the PTP PHC during chip reset")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the missing length hint in the TX BD for the XDP transmit path. The
length hint is required on legacy chips.
Also, simplify the code by eliminating the first_buf local variable.
tx_buf contains the same value. The opaque value only needs to be set
on the first BD. Fix this also for correctness.
Fixes: a7559bc8c1 ("bnxt: support transmit and free of aggregation buffers")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_reinit_after_abort() is called during ifup when a previous
FW reset sequence has aborted or a previous ifup has failed after
detecting FW reset. In all cases, it is safe to assume that a
previous FW reset has completed and the driver may not have fully
reinitialized.
Prior to this patch, it is assumed that the
FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be
set by the firmware in bnxt_hwrm_if_change(). This may not be true if
the driver has already attempted to register with the firmware. The
firmware may not set the RESET_DONE flag again after the driver has
registered, assuming that the driver has seen the flag already.
Fix it to always go through the FW reset initialization path if
the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set
by the driver after successfully going through bnxt_reinit_after_abort().
Fixes: 6882c36cf8 ("bnxt_en: attempt to reinitialize after aborted reset")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If bnxt_sriov_enable() fails after some resources have been reserved
for the VFs, the current code is not unwinding properly and the
reserved resources become unavailable afterwards. Fix it by
properly unwinding with a call to bnxt_hwrm_func_qcaps() to
reset all maximum resources.
Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA
driver know to abort.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix memory leak by reverting what was thought to be a double free.
A static tool had gave a false positive that a double free was
possible in the error path, but it was actually a different location
that confused the static analyzer (and those of us that reviewed it).
- Move use of static buffers by ftrace_dump() to a location that can
be used by kgdb's ftdump(), as it needs it for the same reasons.
- Clarify in the Kconfig description that function tracing has negligible
impact on x86, but may have a bit bigger impact on other architectures.
- Remove unnecessary extra semicolon in trace event.
- Make a local variable static that is used in the fprobes sample
- Use KSYM_NAME_LEN for length of function in kprobe sample and get
rid of unneeded macro for the same purpose.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYs3fgBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlIKAQC9uvEb7fVduv834yU/HiPBbjYjZ7x5
q+G/6EbNVE5htwEA91IU90YdmCPDOkXovuUlTNB/1igvugFPQgR2BwIqgAQ=
=+4E5
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes and minor clean ups for tracing:
- Fix memory leak by reverting what was thought to be a double free.
A static tool had gave a false positive that a double free was
possible in the error path, but it was actually a different
location that confused the static analyzer (and those of us that
reviewed it).
- Move use of static buffers by ftrace_dump() to a location that can
be used by kgdb's ftdump(), as it needs it for the same reasons.
- Clarify in the Kconfig description that function tracing has
negligible impact on x86, but may have a bit bigger impact on other
architectures.
- Remove unnecessary extra semicolon in trace event.
- Make a local variable static that is used in the fprobes sample
- Use KSYM_NAME_LEN for length of function in kprobe sample and get
rid of unneeded macro for the same purpose"
* tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
samples: Use KSYM_NAME_LEN for kprobes
fprobe/samples: Make sample_probe static
blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon
ftrace: Be more specific about arch impact when function tracer is enabled
tracing: Fix sleeping while atomic in kdb ftdump
tracing/histograms: Fix memory leak problem
On some machines hole_end can be small enough to cause subtraction
overflow. On the other side (addr + 2 * min_alignment) can overflow
in case of mock tests. This patch should handle both cases.
Fixes: e1c5f75406 ("drm/i915: Avoid overflow in computing pot_hole loop termination")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624113528.2159210-1-andrzej.hajda@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ab3edc679c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We employ a "waitboost" heuristic to detect when userspace is stalled
waiting for results from earlier execution. Under latency sensitive work
mixed between the gpu/cpu, the GPU is typically under-utilised and so
RPS sees that low utilisation as a reason to downclock the frequency,
causing longer stalls and lower throughput. The user left waiting for
the results is not impressed.
On applying commit 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv
workaround") it was observed that deinterlacing h264 on Haswell
performance dropped by 2-5x. The reason being that the natural workload
was not intense enough to trigger RPS (using HW evaluation intervals) to
upclock, and so it was depending on waitboosting for the throughput.
Commit 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv workaround")
changes the composition of dma-resv from keeping a single write fence +
multiple read fences, to a single array of multiple write and read
fences (a maximum of one pair of write/read fences per context). The
iteration order was also changed implicitly from all-read fences then
the single write fence, to a mix of write fences followed by read
fences. It is that ordering change that belied the fragility of
waitboosting.
Currently, a waitboost is inspected at the point of waiting on an
outstanding fence. If the GPU is backlogged such that we haven't yet
stated the request we need to wait on, we force the GPU to upclock until
the completion of that request. By changing the order in which we waited
upon requests, we ended up waiting on those requests in sequence and as
such we saw that each request was already started and so not a suitable
candidate for waitboosting.
Instead of asking whether to boost each fence in turn, we can look at
whether boosting is required for the dma-resv ensemble prior to waiting
on any fence, making the heuristic more robust to the order in which
fences are stored in the dma-resv.
Reported-by: Thomas Voegtle <tv@lio96.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Fixes: 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07e05518d9f6620d20cc1101ec1849203fe973f9.1657289332.git.karolina.drobnik@intel.com
(cherry picked from commit 394e2b57a9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.
Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.
Cc: stable@vger.kernel.org # v4.4 and upper
Fixes: 7938d61591 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org
(cherry picked from commit 33da978947)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Don't allow two engines to be reset in parallel, as they would both
try to select a reset bit (and send requests to common registers)
and wait on that register, at the same time. Serialize control of
the reset requests/acks using the uncore->lock, which will also ensure
that no other GT state changes at the same time as the actual reset.
Cc: stable@vger.kernel.org # v4.4 and upper
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0a2d894e77aed7c2e36b0d1abdc7dbac3011729.1657639152.git.mchehab@kernel.org
(cherry picked from commit 336561a914)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we encounter some monster sized local-memory page that exceeds the
maximum sg length (UINT32_MAX), ensure that don't end up with some
misaligned address in the entry that follows, leading to fireworks
later. Also ensure we have some coverage of this in the selftests.
v2(Chris):
- Use round_down consistently to avoid udiv errors
v3(Nirmoy):
- Also update the max_segment in the selftest
Fixes: f701b16d4c ("drm/i915/ttm: add i915_sg_from_buddy_resource")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6379
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711085859.24198-1-matthew.auld@intel.com
(cherry picked from commit bc99f1209f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The shmem_pin_map() function doesn't return error pointers, it returns
NULL.
Fixes: be1cb55a07 ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094104.GL2316@kadam
(cherry picked from commit d50f5a109c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In vma destruction, the following race may occur:
Thread 1: Thread 2:
i915_vma_destroy();
...
list_del_init(vma->vm_link);
...
mutex_unlock(vma->vm->mutex);
__i915_vm_release();
release_references();
And in release_reference() we dereference vma->vm to get to the
vm gt pointer, leading to a use-after free.
However, __i915_vm_release() grabs the vm->mutex so the vm won't be
destroyed before vma->vm->mutex is released, so extract the gt pointer
under the vm->mutex to avoid the vma->vm dereference in
release_references().
v2: Fix a typo in the commit message (Andi Shyti)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944
Fixes: e1a7ab4fca ("drm/i915: Remove the vm open count")
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.con>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1926a6b759)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The only difference between the ADL S and P GuC FWs is the HWConfig
support. ADL-N does not support HWConfig, so we should use the same
binary as ADL-S, otherwise the GuC might attempt to fetch a config
table that does not exist. ADL-N is internally identified as an ADL-P,
so we need to special-case it in the FW selection code.
Fixes: 7e28d0b267 ("drm/i915/adl-n: Enable ADL-N platform")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621233005.3952293-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 971e4a9781)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.
Fixes: 091a4f9194 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed611e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It is better and enough to use KSYM_NAME_LEN for kprobes
in samples, no need to define and use the other values.
Link: https://lkml.kernel.org/r/1654651402-21552-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This symbol is not used outside of fprobe_example.c, so marks it static.
Fixes the following warning:
sparse warnings: (new ones prefixed by >>)
>> samples/fprobe/fprobe_example.c:23:15: sparse: sparse: symbol 'sample_probe'
was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220606075659.674556-1-sunliming@kylinos.cn
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.
The start of functions when -pg is used to compile the kernel is:
push {lr}
bl 8010e7c0 <__gnu_mcount_nc>
When function tracing is tuned off, it becomes:
push {lr}
add sp, sp, #4
Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.
Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.
Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home
Reported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Vasily Gorbik