In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch
already been called, the start_cpsch will not be called since there is no resume in this
case. When reset been triggered again, driver should avoid to do uninitialization again.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support that allow the userspace tool like RGP to get the GFX clock
value at runtime, the fix follow the old way to show the min/current/max
clocks level for compatible consideration.
=== Test ===
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz *
1: 1100Mhz
2: 1600Mhz
then run stress test on one APU system.
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz
1: 1040Mhz *
2: 1600Mhz
The current GFXCLK value is updated at runtime.
BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260
Reviewed-by: Huang Ray <Ray.Huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
After commit ("drm/amdgpu/display: add support for multiple backlights")
number of eDPs is defined while registering backlight device.
However the panel's extended caps get updated once before register call.
That leads to regression with extended caps like oled brightness control.
[How]
Update connector ext caps after register_backlight_device
Fixes: 7fd13baeb7 ("drm/amdgpu/display: add support for multiple backlights")
Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.
Fixes: 2f4b411a3d ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.
Fixes: 8f88b3034d ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.
Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
* Various other bugs all over the place.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmGVjogUHGFncnVlbmJh
QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTojHA/7BvjlQKdDG84pbgFwWa2JBHgkfB5u
ayd4gBR9mq3WwOzMO7Wp9dUmUgDYjjj2ZJZkExHYgla+52ScRJAbcTk0VkNpSgy6
pOAZmPpTjmj4KGUghAZuUUqm55S5lpB6A2VciscW0GFGWE7kEOOcs/Gw5heSTpHW
zSLM2cQZ303kqd34KE747DchG6ruwlzsRms8qxwaV6Qe5ZyYx6xSBoL7bJ+VVqdF
Ujn3KEpFd5+aRkffwyypltkIsMh1yQceOCoTOp5G3U8zwl+bT8hhpY6qMvtMtT90
Pl5A7abpM7kGzdbdi3z+RtJK3DwmDgtfFrP6z4LTa4QJtUE8Dn7akIPH5v2E1ajI
vpQVepIS+ryn614nqCyXgGed975gFqNNgZheqiZq2+mQMsAO/fxxI4jMYXpB2Hyi
k4PoFm7K+Gcn8ARkuhlbZiZoo8CldmorZz7lVthyb3hNNzg2EzMK/K14KAz7F7W9
ndcXLnMZdxS3R4wlGVKtfLi/E9+VsM0MPTsfvsJtubq/lfu5d2G47FoQvsYFRRDW
icCzMFC+MshFS+GurSYHGni3x11C6M6wsL7m+YvkPLkDC4Jn4Ok9mdf77DiaHy2L
znc0w32FHSQHQZuYN+Fakr8K+W5k0XGkHeJpVzRglkQf2qH0hClqXnzmgbt60ECu
2rxg2KuSsEiYtrU=
=/Vqx
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
- Various other bugs all over the place.
* tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Prevent endless loops in gfs2_file_buffered_write
gfs2: Fix "Introduce flag for glock holder auto-demotion"
gfs2: Fix length of holes reported at end-of-file
gfs2: release iopen glock early in evict
gfs2: Fix atomic bug in gfs2_instantiate
gfs2: Only dereference i->iov when iter_is_iovec(i)
Print Navi1x fine grained clocks in a consistent manner with other SOCs.
Don't show aritificial DPM level when the current clock equals min or max.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver initialization is driven by IP version from IP
discovery table. So add error print when failing to add
ip block during driver initialization, this will be more
friendly to user to know which IP version is not correct.
[ 40.467361] [drm] host supports REQ_INIT_DATA handshake
[ 40.474076] [drm] add ip block number 0 <nv_common>
[ 40.474090] [drm] add ip block number 1 <gmc_v10_0>
[ 40.474101] [drm] add ip block number 2 <psp>
[ 40.474103] [drm] add ip block number 3 <navi10_ih>
[ 40.474114] [drm] add ip block number 4 <smu>
[ 40.474119] [drm] add ip block number 5 <amdgpu_vkms>
[ 40.474134] [drm] add ip block number 6 <gfx_v10_0>
[ 40.474143] [drm] add ip block number 7 <sdma_v5_2>
[ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init
[ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device.
v2: use dev_err to multi-GPU system
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also print the message index and parameter of the stuck command.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=beJ8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"This is just one bugfix for a buffer overflow in knfsd's xdr decoding"
* tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux:
NFSD: Fix exposure in nfsd4_decode_bitmap()
Revert commit c10383e8dd ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the values of EVENT_* constants from bit masks to bit numbers as
accepted by {clear,set,test}_bit() functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.
This is due to the comparison
if (skb->len - p_off > gso_size)
not properly accounting for the transport layer header.
p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.
gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.
Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.
Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500. skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473. Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.
Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.
Fixes: 6dd912f826 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
Fixes: 7472dd9f64 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original
Realtek USB ethernet chip ID 0bda:8153.
Lenovo Docks always use their own IDs for usb hub, even for older Docks.
If parent hub is from Lenovo, then r8152 should try MAC passthrough.
Verified on Lenovo TBT3 dock too.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
elevator_init_mq() is only called before adding disk, when there isn't
any FS I/O, only passthrough requests can be queued, so freezing queue
plus canceling dispatch work is enough to drain any dispatch activities,
then we can avoid synchronize_srcu() in blk_mq_quiesce_queue().
Long boot latency issue can be fixed in case of lots of disks added
during booting.
Fixes: 737eb78e82 ("block: Delay default elevator initialization")
Reported-by: yangerkun <yangerkun@huawei.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211117115502.1600950-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When running in VM intel_pmu_snapshot_branch_stack triggers WRMSR warning
like:
[ ] unchecked MSR access error: WRMSR to 0x3f1 (tried to write 0x0000000000000000) at rIP: 0xffffffff81011a5b (intel_pmu_snapshot_branch_stack+0x3b/0xd0)
This can be triggered with BPF selftests:
tools/testing/selftests/bpf/test_progs -t get_branch_snapshot
This warning is caused by __intel_pmu_pebs_disable_all() in the VM.
Since it is not necessary to disable PEBS for LBR, remove it from
intel_pmu_snapshot_branch_stack and intel_pmu_snapshot_arch_branch_stack.
Fixes: c22ac2a3d4 ("perf: Enable branch record for software events")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20211112054510.2667030-1-songliubraving@fb.com
According to the latest uncore document, DATA_REQ_OF_CPU (0x83),
DATA_REQ_BY_CPU (0xc0) and COMP_BUF_OCCUPANCY (0xd5) events have
constraints. Add uncore IIO constraints for Snowridge.
Fixes: 210cc5f9db ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-4-alexander.antonov@linux.intel.com
According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.
Fixes: cd34cd97b7 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.
Fixes: cd34cd97b7 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
The intel_engine_create_virtual() function does not return NULL. It
returns error pointers.
Fixes: e5e32171a2 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
(cherry picked from commit fc12b70d12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 991d9557b0 ("drm/i915/tgl/dsi: Gate the ddi clocks
after pll mapping"). The Bspec was updated recently with the pll ungate
sequence similar to that of icl dsi enable sequence. Hence reverting.
Bspec: 49187
Fixes: 991d9557b0 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109120428.15211-1-vandita.kulkarni@intel.com
(cherry picked from commit 4579509ef1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The cross-reference for the handbooks section works. However, it is
meant to describe the path inside the Kernel's doc where the section
is, but there's an space instead of a dash, plus it lacks the .rst at
the end, which makes:
./scripts/documentation-file-ref-check
to complain.
Fixes: 604370e106 ("Documentation/process: Add maintainer handbooks section")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The file name: accounting/delay-accounting.rst
should be, instead: Documentation/accounting/delay-accounting.rst.
Also, there's no need to use doc:`foo`, as automarkup.py will
automatically handle plain text mentions to Documentation/
files.
So, update its cross-reference accordingly.
Fixes: fcb5017045 ("delayacct: Document task_delayacct sysctl")
Fixes: c3123552aa ("docs: accounting: convert to ReST")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 4f86a06e2d ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmGUEocACgkQSD+KveBX
+j6ynwf/UKQ4I+ZexNfgDmINn4qNgGjnOOq8EfaPPBUzUODObmgPHV7fPT8ADX3b
sLx7CgVGRHnk36XqDhptYrIDEtbfa26epRvr3PGU4FcUmz+PoJprQtWBK2B5PDiT
nwSmxerEauiji7LxlXx9YmtfpnbeHDFanjJyYbVnuZkqREMP7S/B73KLFnW7WEyU
EyEKu+oahGx3C4CiF7Fg20w9mP2fujC7pw+og+g6T9dDiF/ynTCf1KZMXq1EwA1M
+/GS37Lm4VEoCrumiF6HGYmr9gRIFhMXBTaTRYzuz/d7FPxFrtF/88IF0xfmFmLr
7SNBWjmNnjnCaXNIlY1IbyHh9/P83Q==
=a7ES
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2021-11-16
Please pull this mlx5 fixes series, or let me know in case of any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The efifb and simplefb drivers just render to a pre-allocated frame buffer
and rely on the display hardware being initialized before the kernel boots.
But if another driver already probed correctly and registered a fbdev, the
generic drivers shouldn't be probed since an actual driver for the display
hardware is already present.
This is more likely to occur after commit d391c58271 ("drivers/firmware:
move x86 Generic System Framebuffers support") since the "efi-framebuffer"
and "simple-framebuffer" platform devices are registered at a later time.
Link: https://lore.kernel.org/r/20211110200253.rfudkt3edbd3nsyj@lahvuun/
Fixes: d391c58271 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Ilya Trukhanov <lahvuun@gmail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Ilya Trukhanov <lahvuun@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211111115757.1351045-1-javierm@redhat.com
When calling setattr_prepare() to determine the validity of the attributes the
ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id.
When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id
matches the current {g,u}id attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and will have
taken the relevant idmapping into account. So in order to verify that the
{g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value
against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has a meaning
when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped
to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be
useful when sharing the same home directory between multiple users at the same
time.
As an example consider a directory with two files: /source/file1 owned by
{g,u}id 1000 and /source/file2 owned by {g,u}id 1001. Assume we create an
idmapped mount at /target with an idmapping that maps files owned by {g,u}id
1000 to being owned by {g,u}id 1001 and files owned by {g,u}id 1001 to being
owned by {g,u}id 1000. In effect, the idmapped mount at /target switches the
ownership of /source/file1 and source/file2, i.e. /target/file1 will be owned
by {g,u}id 1001 and /target/file2 will be owned by {g,u}id 1000.
This means that a user with fs{g,u}id 1000 must be allowed to setattr
/target/file2 from {g,u}id 1000 to {g,u}id 1000. Similar, a user with fs{g,u}id
1001 must be allowed to setattr /target/file1 from {g,u}id 1001 to {g,u}id
1001. Conversely, a user with fs{g,u}id 1000 must fail to setattr /target/file1
from {g,u}id 1001 to {g,u}id 1000. And a user with fs{g,u}id 1001 must fail to
setattr /target/file2 from {g,u}id 1000 to {g,u}id 1000. Both cases must fail
with EPERM for non-capable callers.
Before this patch we could end up denying legitimate attribute changes and
allowing invalid attribute changes when circular mappings are used. To even get
into this situation the caller must've been privileged both to create that
mapping and to create that idmapped mount.
This hasn't been seen in the wild anywhere but came up when expanding the
testsuite during work on a series of hardening patches. All idmapped fstests
pass without any regressions and we add new tests to verify the behavior of
circular mappings.
Link: https://lore.kernel.org/r/20211109145713.1868404-1-brauner@kernel.org
Fixes: 2f221d6f7b ("attr: handle idmapped mounts")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
drm_sched_job_add_dependency() could drop the last ref, so we need to do
the dma_fence_get() first.
Cc: Christian König <christian.koenig@amd.com>
Fixes: 9c2ba26535 ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116155545.473311-1-robdclark@gmail.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
The recent addition of timestamp correction to compensate the CDC error
introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while
it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp().
The issue is:
s64 adjust = 0;
u64 ns;
adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate));
ns += adjust;
works by chance on 64bit, but falls apart on 32bit because the compiler
knows that adjust fits into 32bit and then treats the addition as a u64 +
u32 resulting in an off by ~2 seconds failure.
The RX variant uses an u64 for adjust and does the adjustment via
ns -= adjust;
because consistency is obviously overrated.
Get rid of the pointless zero initialized adjust variable and do:
ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
which is obviously correct and spares the adjust obfuscation. Aside of that
it yields a more accurate result because the multiplication takes place
before the integer divide truncation and not afterwards.
Stick the calculation into an inline so it can't be accidentally
disimproved. Return an u32 from that inline as the result is guaranteed
to fit which lets the compiler optimize the substraction.
Cc: stable@vger.kernel.org
Fixes: 3600be5f58 ("net: stmmac: add timestamp correction to rid CDC sync error")
Reported-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benedikt Spranger <b.spranger@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel EHL
Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long says:
====================
net: fix the mirred packet drop due to the incorrect dst
This issue was found when using OVS HWOL on OVN-k8s. These packets
dropped on rx path were seen with output dst, which should've been
dropped from the skbs when redirecting them.
The 1st patch is to the fix and the 2nd is a selftest to reproduce
and verify it.
====================
Link: https://lore.kernel.org/r/cover.1636734751.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.
This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.
Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the amt module is being removed, it calls cancel_delayed_work()
to cancel pending delayed_work. But this function doesn't wait for
canceling delayed_work.
So, workers can be still doing after module delete.
In order to avoid this, cancel_delayed_work_sync() should be used instead.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: bc54e49c14 ("amt: add multicast(IGMP) report message handler")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shaoyunl