The changes for the hte/timestamp subsystem include the following:
- Add Tegra234 HTE provider and relevant DT bindings
- Update MAINTAINERS file for the HTE subsystem
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQT4slW2T0Q/rXAa29f4pUxhzZTZKAUCZErbLBIcZGlwZW5wQG52
aWRpYS5jb20ACgkQ+KVMYc2U2SiW0QEAt3bPgopjIMzaInOguZthR1pHCuKtyK7F
u4aJAyHv7tIA/jtsFJuFO4LmiwA/IsNits5l7F36oaB94/cQGuRH1M8E
=opcL
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp engine updates from Dipen Patel:
"The changes for the hte subsystem include:
- Add Tegra234 HTE provider and relevant DT bindings
- Update MAINTAINERS file for the HTE subsystem"
* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: Use proper includes
hte: Use device_match_of_node()
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
hte: tegra: fix 'struct of_device_id' build error
hte: Use of_property_present() for testing DT property presence
gpio: tegra186: Add Tegra234 hte support
hte: handle nvidia,gpio-controller property
hte: Deprecate nvidia,slices property
hte: Add Tegra234 provider
hte: Re-phrase tegra API document
arm64: tegra: Add Tegra234 GTE nodes
dt-bindings: timestamp: Deprecate nvidia,slices property
dt-bindings: timestamp: Add Tegra234 support
MAINTAINERS: Add HTE/timestamp subsystem details
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
- relocate the LoongArch kernel if the preferred address is already
occupied;
- implement BTI annotations for arm64 EFI stub and zboot images;
- clean up arm64 zboot Kbuild rules for injecting the kernel code size.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZEwUOwAKCRAwbglWLn0t
XMNzAQChdPim0N+l2G4XLa1g8WCGany/+6/B9GHPJVcmQ25zLQD/UaNvAofkHwjR
Y3P3ZEY1SPEA+UJBL/BTI0wO9/XgpAA=
=hGWP
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- relocate the LoongArch kernel if the preferred address is already
occupied
- implement BTI annotations for arm64 EFI stub and zboot images
- clean up arm64 zboot Kbuild rules for injecting the kernel code size
* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/zboot: arm64: Grab code size from ELF symbol in payload
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
efi/zboot: Set forward edge CFI compat header flag if supported
efi/zboot: Add BSS padding before compression
arm64: efi: Enable BTI codegen and add PE/COFF annotation
efi/pe: Import new BTI/IBT header flags from the spec
efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel
Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqB7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQuwCgwU9bGoihDtFsoFYUra/FKPPoC88Anj6t1a1f
X5HZmADnwrFNNq/jP4vH
=FeNF
-----END PGP SIGNATURE-----
Merge tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
n_gsm: Use array_index_nospec() with index that comes from userspace
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: simplify some cases in tioclinux()
tty: vt: reformat tioclinux()
tty: serial: sh-sci: Fix end of transmission on SCI
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
serial: max310x: fix IO data corruption in batched operations
serial: core: Disable uart_start() on uart_remove_one_port()
serial: 8250: Reinit port->pm on port specific driver unbind
serial: 8250: Add missing wakeup event reporting
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: fix TIOCSRS485 locking
serial: make SiFive serial drivers depend on ARCH_ symbols
tty: synclink_gt: don't allocate and pass dummy flags
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
...
Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
"biggest" thing in here is the removal of two obsolete drivers, u132-hcd
and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqC+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynP6QCg0MnpRjOSFyAB0t9LWFng4rRikj4AoIpxvs2T
GbU7NdPHU3fddq0KB+Nd
=M+Ib
-----END PGP SIGNATURE-----
Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
The EFI zboot code is not built as part of the kernel proper, like the
ordinary EFI stub, but still needs access to symbols that are defined
only internally in the kernel, and are left unexposed deliberately to
avoid creating ABI inadvertently that we're stuck with later.
So capture the kernel code size of the kernel image, and inject it as an
ELF symbol into the object that contains the compressed payload, where
it will be accessible to zboot code that needs it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
Update the compatible for the Realtek RTL8821CS bluetooth node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add some plumbing to the zboot EFI header generation to set the newly
introduced DllCharacteristicsEx flag associated with forward edge CFI
enforcement instructions (BTI on arm64, IBT on x86)
x86 does not currently uses the zboot infrastructure, so let's wire it
up only for arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
cluster. Volume-keys (via adc) for the Pinephone Pro, display support for
the Anbernic RG353. As well as gpio-ranges for rk356x and fixes for the
audio-codec node-names on two boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQ92RgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcXBB/43meqk8lbSdnOl12+ct+JC6U7wK6WB3RHk
1vVlzxQTL5myaKlVdXbA55FoxkETs2fL4oBeekJ/ajlRysQkW3nEQl6QsnbPY2gn
sDVDvogX7EKsp7X2ECLmzxxgJl/R2PY2Jsl5mbqMt3tXAl3J75fSIrPwptd4JTqg
IxtN16IHBmTPwlyDY/AXSDICudMET/URUkjaYOR4S6BcN2+7oR5M9NP4DD9/0P6f
1FV0FxTMSNAMiEpDCtHPfa29pjh83CtIpW57v2yvXthsiSR3McmNXPhnYbuZKCvD
ZE7NzhgXHvbRatR0YHj+vj8HHoYDYkRYTrbIRoWMvc2tT/ht34QQ
=4xMh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=d/86
-----END PGP SIGNATURE-----
Merge tag 'v6.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
On the Rock5b a fix the newly added rtc node and cpu-regulators for the big
cluster. Volume-keys (via adc) for the Pinephone Pro, display support for
the Anbernic RG353. As well as gpio-ranges for rk356x and fixes for the
audio-codec node-names on two boards.
* tag 'v6.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
arm64: dts: rockchip: add panel to Anbernic RG353 series
Link: https://lore.kernel.org/r/5144826.MHq7AAxBmi@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are implemented via regular ADC, so regular polling is needed,
for these keys to work.
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230405123813.2272919-1-pbrobinson@gmail.com
[increased Volume-Down voltage to 600mV as suggested by Ondrej]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZD0PuAAKCRAd+FPLCI8z
YljSAP9IWstTYTmoFOga4Ba4S8LBcmuTBUqHmVbHNZYCO3JrfwD/T4Xn2qvHfdsd
/ajLodjmHoLh/E6HuSai55u6YLGi6As=
=e3Zh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=sofq
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.4 (v2).
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
* tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
Link: https://lore.kernel.org/r/d0862463-acb3-ce83-6493-281a833ec87e@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The RK8602 and RK8603 voltage regulators on the Rock 5B board provide
the power lines vdd_cpu_big0 and vdd_cpu_big1, respectively.
Add the necessary device tree nodes and bind them to the corresponding
CPU big core nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The hym8563 RTC driver doesn't handle the 'clock-frequency' property,
which is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
From schema: Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
Drop the unsupported property.
Fixes: 1e9c2404d8 ("arm64: dts: rockchip: Enable RTC support for Rock 5B")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the device tree entries for the PWM controller
present on M2 macbooks that is connected to the keyboard backlight.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Adds PWM controller and keyboard backlight bindings for M1 MacBooks
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
-----BEGIN PGP SIGNATURE-----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=vVPv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HFrk
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmQ0mjwACgkQh9CWnEQH
BwR0nQ//f9Q6E83ROQ3eNdRrCQuvxHeJ5EQgXRM+4F3jiazJdKpAxiNSg2uoM7/T
haom+DYrkeG6Jv6yqlDJIbFccHeaJUmFBzXxZ42ly5M0HliMF5jnsdqqdPdcwoPB
hzhuSI0pWU2OUESJpVxoPnjCywrz8FnjnVpeIUOLricJm3oleju5Wrcj2AWv04bx
3Vkxag1YUDj1W8boR4T0WIK+dJ4ZBdRKsFZhFtkuIP0+EI2NzFgS9Rk2tWpiCb5W
06mIytL4LFkliUmlECQIMup+Dgx8z9AkwxTPhE1or/CtYw5xw4JKOG3Gf8M5FX+g
LNEZzQ4227TFioztmBNHkQ0Ht1wE/wD5Jw8i8qy87SwTvOEEX8abmQ2hRSXzJAo0
QRqfSE2WIZzA6cV4IGuud/GeeDDm7jKmz3SxzMkAMjin0tkf2OxkoicQeJUxxEXx
J71wSYuZuQPrW/QjD10QbdClgAjB9sdiCWYnRljoKxJttq0ro4qxEPLm0ovKiyb/
KIhqz8sGoJ20CPKcGmki7eF9f8A3uLYzn7q6+fzYvd31QbDSbA4aOuyzCVqgFM/5
eoitbk3jrNmxbeGNqWopf9cJqgRpiiid3U9GzhFctj07+u/zY4buVlnH8fcVtug5
2wQR4po996ul0+E5hpnk8OPBZ6Be76/no8nyaxJiajqpGbFqsrQ=
=vioZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4E45
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
* tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
arm64: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
Link: https://lore.kernel.org/r/20230410232606.1917803-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
-----BEGIN PGP SIGNATURE-----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=ZyN2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5d90ACgkQYKtH/8kJ
UifbkRAA0tH8h0ehQRsfgaijE+KNM5IOwi7iszD7NObNG+5Nal5QO6H9CvrEEbgv
4c6qwkC7F+ZN+zTVeKTufqZ6/zkylW+AMzL4UuAl5BxhMMrWzsg1NR1+NlbKssEb
EBbLll7uxohuK79JNjmor/VV+zJX+hOyAhsf6yo6gpYFiJdgrRGwWVFVflNTNQis
mpw5U4SyFNo4lq/HDERuxWbbsTl+VmoCeezCRgolaVkq4RTeMNcIxbm/kJ+t9ela
HNm6mpJWqUUGeNpos5VdCqLApxBQgYmwz1mPHTQfC0V9v8YlVnTTKVmw4lHoGnZp
ADN7iQSqqpsOLjML3+7HfQ8FWTTpj6FbE+vcSTiLjnstv9oDYd2wf9FPzJqcDVTl
MucZVPk75zutakDuHOxizdfSTXPnpyEXnpnEUla6E+BntkB5eCTz45NN9B35gowA
fY437FQ95eY2mV2vpya91rH2Rtw5BJbZW6jsw+WxT29A67LBa+sJrTayDNzYLuUz
GjSb2vmRr2r3WG1jy8QQxVC3R/t4rlqXBnmJ91nHNIgrGl5ExrIEt+IDRsqHlS7T
V1xX4fl9Ge2zfZeoFPFhgIBpPtvEkW5mUKIjRX6EBvRnG9+T8CWuWSnJDuFa6AMZ
kxAhqUojmDO8f1E/BPiHHCP31dfUrMOVor0fu9qu7o8/H/WPo04=
=OcHF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO9eAAKCRCKwlD9ZEnx
cDqrAP4wBrYlD0ih3wMZbcrHAZpIfhLLLlUBDT0JfYYy/mSGXwEA69C5A00Gx47o
R4eLM6rSfPKw4KNJcLFwO5eqMsPzEQs=
=uYv8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UIZB
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxOOAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6mqwf8CYJZwCv3TEUHtV8U8wKnQddPPeyo
M62FQYTS2NBcLNPv3wqus3QaED2AmuY9ibFG/R7CBpNgs89QtTJfGbGrQnFea9Kt
ylXVHj4OtF0edAG1YpRfg+1kWx1If61OO1yuVGxbGZEwCgVMkBVQfNgTT+awZWOX
CCAe9m6TM7mNWMPoIrymaUuTFQDkG9WisSyafAdQUBVRaIUpYzWVkBLK130mpxLo
/J4jYv58beoZmd4eh942c5Ui8SYg0bGmxNdrtsvsmE7IWRkB77JxFgVrh6OokS70
c+zBU+9epWBRW4d7J4QCHCNhlXqKPF6XHuxeW8Q0OxvC/sLCSTK2QD7puQ==
=aFxm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8OCT
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
-----BEGIN PGP SIGNATURE-----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=qCDN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xfIt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=GkR1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kJMa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
-----BEGIN PGP SIGNATURE-----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=3Uaf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ikZD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQx/6UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYMiB/45skI/LcajSjuqIJpAC+cDeCs/IaQb6aev
4fnwBRYgb836JvThTGeOn4KRe2avnZMfyjn3IlkHhYBHtLukS8jcuNuU+T+oD1/n
Yss63kUSbMCvNl13uCSz/dqsaFZJ1x8hHth0b19PlGWnnBgtzWWWScr371m+PsF6
2x2dnteRvQcUyWa8/5Xavgc8bseMds2SiKEc9Y58MTwRVL/pqfh9AFJhsWRJYFsN
x0SU+Gwopg2qW+Mfdm6DOK1m08Vu6Uaw1zftF06/oAnDqvYMiVSWfsFIpW5eEi/T
kb5ovzTTDwnLz/n8jkG1ldB7hQY362NQjyIc/GoUab/03yxyFE63
=JS4f
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yjl8
-----END PGP SIGNATURE-----
Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Prepare for the MM nodes whose dma-ranges(iova range) is 16GB.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-15-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges property is not allowed for
the leaf node. But our iommu/dma-ranges is 16GB, we still expect
separate the 16GB dma-range like:
a) display is in 0 - 4GB;
b) vcodec is in 4GB - 8GB;
c) camera is in 8GB - 12GB.
We can not expect all the masters add a parent node for them,
especial for the existed drivers/nodes.
Thus, we add whole the 16GB dma-ranges in the parent "soc" node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-14-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After we add the dma-ranges in the parent "soc" node,
this property is unnecessary for the leaf node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-13-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This smartphone features a Bosch BMM050 Magnetometer on I2C3: enable
it with the BMM150 binding, as that driver supports BMM050 as well.
For this sensor, there is no interrupt pin;
readings were validated in sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-28-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
not display specific and can be used as a generic PWM controller.
This node is left disabled as usage is board-specific.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Linus Torvalds