For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.
Fixes: 22f48e24a2 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when hns3 driver configures the tm shaper to limit
bandwidth below 20Mbit using the parameters calculated by
hclge_shaper_para_calc(), the actual bandwidth limited by tm
hardware module is not accurate enough, for example, 1.28 Mbit
when the user is configuring 1 Mbit.
This patch adjusts the ir_calc to be closer to ir, and
always calculate the ir_b parameter when user is configuring
a small bandwidth. Also, removes an unnecessary parenthesis
when calculating denominator.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After setting new channel num, it needs free old ring memory and
allocate new ring memory. If there is no enough memory and allocate
new ring memory fail, the ring may initialize fail. To make sure
the network interface can work normally, driver should revert the
channel to the old configuration.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds ethtool_ops.set_channels support for HNS3 VF driver,
and updates related TQP information and RSS information, to support
modification of VF TQP number, and uses current rss_size instead of
max_rss_size to initialize RSS.
Also, fixes a format error in hclgevf_get_rss().
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Link: https://lore.kernel.org/r/20190813063657.7544-1-sven@narfation.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
commit 1222a16014 ("nl80211: Fix possible Spectre-v1 for CQM
RSSI thresholds") was incomplete and requires one more fix to
prevent accessing to rssi_thresholds[n] because user can control
rssi_thresholds[i] values to make i reach to n. For example,
rssi_thresholds = {-400, -300, -200, -100} when last is -34.
Cc: stable@vger.kernel.org
Fixes: 1222a16014 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make it possibly for drivers to adjust the default max_mtu
by storing it in the hardware struct and using that value
for all interfaces.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1567738137-31748-1-git-send-email-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the help of boolinit.cocci, we use !nl80211_reg_change_event_fill
instead of (nl80211_reg_change_event_fill == false). Meanwhile, Clean
up the code.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567657537-65472-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we expire an inactive station, try to send it a deauth. This
helps if it's actually still around, and just has issues with
beacon distribution (or we do), and it will not also remove us.
Then, if we have shared state, this may not be reset properly,
causing problems; for example, we saw a case where aggregation
sessions weren't removed properly (due to the TX start being
offloaded to firmware and it relying on deauth for stop), causing
a lot of traffic to get lost due to the SN reset after remove/add
of the peer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-9-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We already assume that key is not NULL and dereference it in a few
other places before we check whether it is NULL, so the check is
unnecessary. Remove it.
Fixes: 96fc6efb9a ("mac80211: IEEE 802.11 Extended Key ID support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-8-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case we got a fw restart while roaming from encrypted AP to
non-encrypted one, we might end up with hitting a warning on the pending
counter crypto_tx_tailroom_pending_dec having a non-zero value.
The following comment taken from net/mac80211/key.c explains the rational
for the delayed tailroom needed:
/*
* The reason for the delayed tailroom needed decrementing is to
* make roaming faster: during roaming, all keys are first deleted
* and then new keys are installed. The first new key causes the
* crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes
* the cost of synchronize_net() (which can be slow). Avoid this
* by deferring the crypto_tx_tailroom_needed_cnt decrementing on
* key removal for a while, so if we roam the value is larger than
* zero and no 0->1 transition happens.
*
* The cost is that if the AP switching was from an AP with keys
* to one without, we still allocate tailroom while it would no
* longer be needed. However, in the typical (fast) roaming case
* within an ESS this usually won't happen.
*/
The next flow lead to the warning eventually reported as a bug:
1. Disconnect from encrypted AP
2. Set crypto_tx_tailroom_pending_dec = 1 for the key
3. Schedule work
4. Reconnect to non-encrypted AP
5. Add a new key, setting the tailroom counter = 1
6. Got FW restart while pending counter is set ---> hit the warning
While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into
its single caller ieee80211_reenable_keys (previously called
ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec
and remove the counters warning as we just reset both.
Signed-off-by: Lior Cohen <lior2.cohen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we reach this point, the key cannot be NULL. Remove the condition
that suggests otherwise.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-6-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
"HE/HT/VHT" is a bit confusing since really the order of
development (and possible support) is different - change
this to "HT/VHT/HE".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-4-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the RFKILL subsystem isn't available, then rfkill_blocked()
always returns false. In the case of hardware rfkill this will
be wrong though, as if the hardware reported being killed then
it cannot operate any longer.
Since we only ever call the rfkill_sync work in this case, just
rename it to rfkill_block and always pass "true" for the blocked
parameter, rather than passing rfkill_blocked().
We rely on the underlying driver to still reject any new attempt
to bring up the device by itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes was missed in parsing the vht capabilities max bw
support.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes: e80d642552 ("mac80211: copy VHT EXT NSS BW Support/Capable data to station")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830114057.22197-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The boundary value used for the 6G band was incorrect as it would
result in invalid 6G channel number for certain frequencies.
Reported-by: Amar Singhal <asinghal@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/1567510772-24263-1-git-send-email-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds support for packet mirroring and redirection. The
nft_fwd_dup_netdev_offload() function configures the flow_action object
for the fwd and the dup actions.
Extend nft_flow_rule_destroy() to release the net_device object when the
flow_rule object is released, since nft_fwd_dup_netdev_offload() bumps
the net_device reference counter.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>
Mark mlx5_tracer_print_trace as noinline as the function only uses 512
bytes on the stack to avoid the following build warning:
drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:660:13: error: stack frame size of 1032 bytes in function 'mlx5_fw_tracer_handle_traces' [-Werror,-Wframe-larger-than=]
Fixes: 70dd6fdb89 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
clang errors when CONFIG_PHYS_ADDR_T_64BIT is not set:
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c:121:8:
error: incompatible pointer types passing 'u64 *' (aka 'unsigned long
long *') to parameter of type 'phys_addr_t *' (aka 'unsigned int *')
[-Werror,-Wincompatible-pointer-types]
&icm_mr->dm.addr, &icm_mr->dm.obj_id);
^~~~~~~~~~~~~~~~
include/linux/mlx5/driver.h:1092:39: note: passing argument to parameter
'addr' here
u64 length, u16 uid, phys_addr_t *addr, u32 *obj_id);
^
1 error generated.
Use phys_addr_t for addr's type in mlx5dr_icm_dm, which won't change
anything with 64-bit builds because phys_addr_t is u64 when
CONFIG_PHYS_ADDR_T_64BIT is set, which is always when CONFIG_64BIT is
set.
Fixes: 29cf8febd1 ("net/mlx5: DR, ICM pool memory allocator")
Link: https://github.com/ClangBuiltLinux/linux/issues/653
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
clang warns:
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1080:9:
warning: implicit conversion from enumeration type 'enum
mlx5_reformat_ctx_type' to different enumeration type 'enum
mlx5dr_action_type' [-Wenum-conversion]
rt = MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1082:9:
warning: implicit conversion from enumeration type 'enum
mlx5_reformat_ctx_type' to different enumeration type 'enum
mlx5dr_action_type' [-Wenum-conversion]
rt = MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1084:51:
warning: implicit conversion from enumeration type 'enum
mlx5dr_action_type' to different enumeration type 'enum
mlx5_reformat_ctx_type' [-Wenum-conversion]
ret = mlx5dr_cmd_create_reformat_ctx(dmn->mdev, rt, data_sz, data,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~
3 warnings generated.
Use the right type for rt, which is mlx5_reformat_ctx_type so there are
no warnings about mismatched types.
Fixes: 9db810ed2d ("net/mlx5: DR, Expose steering action functionality")
Link: https://github.com/ClangBuiltLinux/linux/issues/652
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Austin Kim <austindh.kim@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Register a new synproxy stateful object type into the stateful object
infrastructure.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This issue causes SCTP_PEER_ADDR_THLDS sockopt not to be able to dump
a transport thresholds info.
Fix it by adding 'goto' put_user in sctp_getsockopt_paddr_thresholds.
Fixes: 8add543e36 ("sctp: add SCTP_FUTURE_ASSOC for SCTP_PEER_ADDR_THLDS sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
it would make no progress inside the loop in hhf_dequeue() thus
kernel would get stuck.
Fix this by checking this corner case in hhf_change().
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Terry Lam <vtlam@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At least sch_red and sch_tbf don't implement ->tcf_block()
while still have a non-zero tc "class".
Instead of adding nop implementations to each of such qdisc's,
we can just relax the check of cops->tcf_block() in
tc_bind_tclass(). They don't support TC filter anyway.
Reported-by: syzbot+21b29db13c065852f64b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
nfp: implement firmware loading policy
Dirk says:
This series adds configuration capabilities to the firmware loading policy of
the NFP driver.
NFP firmware loading is controlled via three HWinfo keys which can be set per
device: 'abi_drv_reset', 'abi_drv_load_ifc' and 'app_fw_from_flash'.
Refer to patch #11 for more detail on how these control the firmware loading.
In order to configure the full extend of FW loading policy, a new devlink
parameter has been introduced, 'reset_dev_on_drv_probe', which controls if the
driver should reset the device when it's probed. This, in conjunction with the
existing 'fw_load_policy' (extended to include a 'disk' option) provides the
means to tweak the NFP HWinfo keys as required by users.
Patches 1 and 2 adds the devlink modifications and patches 3 through 9 adds the
support into the NFP driver. Furthermore, the last 2 patches are documentation
only.
v2:
Renamed all 'reset_dev_on_drv_probe' defines the same as the devlink parameter
name (Jiri)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the initial documentation for the NFP driver specific
documentation.
Right now, only basic information is provided about acquiring firmware
and configuring device firmware loading.
Original driver documentation can be found here:
https://github.com/Netronome/nfp-drv-kmods/blob/master/README.md
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed the incorrect prefix for the 'nfp_fw_load' function.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the 'reset_dev_on_drv_probe' devlink parameter. The
reset control policy is controlled by the 'abi_drv_reset' hwinfo key.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the 'fw_load_policy' devlink parameter. The FW load
policy is controlled by the 'app_fw_from_flash' hwinfo key.
Remap the values from devlink to the hwinfo key and back.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register devlink parameters for driver use. Subsequent patches will add
support for specific parameters.
In order to support devlink parameters, the management firmware needs to
be able to lookup and set hwinfo keys.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware reset and loading policies can be controlled with the
combination of three hwinfo keys, 'abi_drv_reset', 'abi_drv_load_ifc'
and 'app_fw_from_flash'.
'app_fw_from_flash' defines which firmware should take precedence,
'Disk', 'Flash' or the 'Preferred' firmware. When 'Preferred'
is selected, the management firmware makes the decision on which
firmware will be loaded by comparing versions of the flash firmware
and the host supplied firmware.
'abi_drv_reset' defines when the driver should reset the firmware when
the driver is probed, either 'Disk' if firmware was found on disk,
'Always' reset or 'Never' reset. Note that the device is always reset
on driver unload if firmware was loaded when the driver was probed.
'abi_drv_load_ifc' defines a list of PF devices allowed to load FW on
the device.
Furthermore, we limit the cases to where the driver will unload firmware
again when the driver is removed to only when firmware was loaded by the
driver and only if this particular device was the only one that could
have loaded firmware. This is needed to avoid firmware being removed
while in use on multi-host platforms.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the NSP HWinfo set command. This closely follows the
HWinfo lookup command.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are cases where we want to read a hwinfo entry from the NFP, and
if it doesn't exist, use a default value instead.
To support this, we must silence warning/error messages when the hwinfo
entry doesn't exist since this is a valid use case. The NSP command
structure provides the ability to silence command errors, in which case
the caller should log any command errors appropriately. Protocol errors
are unaffected by this.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the simple command that indicates whether application
firmware is loaded.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the 'reset_dev_on_drv_probe' devlink parameter, controlling the
device reset policy on driver probe.
This parameter is useful in conjunction with the existing
'fw_load_policy' parameter.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the 'disk' value to the generic 'fw_load_policy' devlink parameter.
This value indicates that firmware should always be loaded from disk
only.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: add PCL support
This small series implements the ethtool RXNFC operations in the
mv88e6xxx DSA driver to configure a port's Layer 2 Policy Control List
(PCL) supported by models such as 88E6352 and 88E6390 and equivalent.
This allows to configure a port to discard frames based on a configured
destination or source MAC address and an optional VLAN, with e.g.:
# ethtool --config-nfc lan1 flow-type ether src 00:11:22:33:44:55 action -1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the .get_rxnfc and .set_rxnfc DSA operations to configure
a port's Layer 2 Policy Control List (PCL) via ethtool.
Currently only dropping frames based on MAC Destination or Source
Address (including the option VLAN parameter) is supported.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new .port_set_policy operation to configure a port's
Policy Control List, based on mapping such as DA, SA, Etype and so on.
Models similar to 88E6352 and 88E6390 are supported at the moment.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marvell has different values for the state of a MAC address,
depending on its multicast bit. This patch completes the definitions
for these states.
At the same time, use 0 which is intuitive enough and simplifies the
code a bit, instead of the UC or MC unused value.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ath9k_wmi_cmd, the allocated network buffer needs to be released
if timeout happens. Otherwise memory will be leaked.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service
if time out happens, the allocated buffer needs to be released.
Otherwise there will be memory leak.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath9k_reg_rmw_single do not need return value to cope with different
cases. And change functon return type to void.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For sdio chip, if the rssi is not good, then it have some retry,
firmware will indicate the msdu list of a ppdu with a hole, it
means it lost the hole msdu, after the msdu retry from AP, the
hole msdu will indicate from firmware later. The hole msdu's PN
check will fail and the hole msdu will be dropped.
PN check fail example:
Sequence number PN number PN check status
3814 6101 success
3815 6102 success
3816 6103 success
3818 6105 success
3819 6106 success
3820 6107 success
3817 6104 fail
The correct logic is reorder the msdu list and then do PN check.
ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic
and then do PN check in ieee80211_rx_h_decrypt of mac80211.
example after reorder:
Sequence number PN number PN check status
3814 6101 success
3815 6102 success
3816 6103 success
3817 6104 success
3818 6105 success
3819 6106 success
3820 6107 success
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For PMF case, the action,deauth,disassoc management need to encrypt
by hardware, it need to reserve 8 bytes for encryption, otherwise
the packet will be sent out with error format, then PMF case will
fail.
After add the 8 bytes, it will pass the PMF case.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
These are two regression fixes for bugs that got introduced
during the system call rework that went into linux-5.1
but only bisected and fixed now:
- One patch affects semtimedop() on many of the less
common 32-bit architectures, this just needs a single-line
bugfix.
- The other affects only sparc64 and has a slightly more
invasive workaround to apply the same change to sparc64
that was done to the generic code used everywhere else.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XsII
-----END PGP SIGNATURE-----
Merge tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ipc regression fixes from Arnd Bergmann:
"Fix ipc regressions from y2038 patches
These are two regression fixes for bugs that got introduced during the
system call rework that went into linux-5.1 but only bisected and
fixed now:
- One patch affects semtimedop() on many of the less common 32-bit
architectures, this just needs a single-line bugfix.
- The other affects only sparc64 and has a slightly more invasive
workaround to apply the same change to sparc64 that was done to the
generic code used everywhere else"
* tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ipc: fix sparc64 ipc() wrapper
ipc: fix semtimedop for generic 32-bit architectures
We should only try to execute fallback quirks handling when previous
call returned -ENOENT, and not when we did not get -EPROBE_DEFER.
The other errors should be treated as hard errors: we did find the GPIO
description, but for some reason we failed to handle it properly.
The fallbacks should only be executed when previous handlers returned
-ENOENT, which means the mapping/description was not found.
Also let's remove the explicit deferral handling when iterating through
GPIO suffixes: it is not needed anymore as we will not be calling
fallbacks for anything but -ENOENT.
Fixes: df451f83e1 ("gpio: of: fix Freescale SPI CS quirk handling")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190903231856.GA165165@dtor-ws
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- fix a memory leak in gpio-mockup
- fix two flag validation bugs in gpiolib's character device ioctl()'s
-----BEGIN PGP SIGNATURE-----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=Tdo8
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio: fixes for v5.4
- fix a memory leak in gpio-mockup
- fix two flag validation bugs in gpiolib's character device ioctl()'s
Don't populate the array modes on the stack but instead make it
static const. Makes the object code smaller by 303 bytes.
Before:
text data bss dec hex filename
51240 5008 1312 57560 e0d8 mellanox/mlx4/en_ethtool.o
After:
text data bss dec hex filename
50937 5008 1312 57257 dfa9 mellanox/mlx4/en_ethtool.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.
Libraries like libnl will wait forever for NLMSG_DONE.
Fixes: 949f1e39a6 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang