The Digital Speaker Controller (DSPK) converts the multi-bit Pulse Code
Modulation (PCM) audio input to oversampled 1-bit Pulse Density Modulation
(PDM) output. From the signal flow perpsective, the DSPK can be viewed as
a PDM transmitter that up-samples the input to the desired sampling rate
by interpolation then converts the oversampled PCM input to the desired
1-bit output via Delta Sigma Modulation (DSM).
This patch registers DSPK component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DSPK interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DSPK devices can be enabled in the DT via
"nvidia,tegra186-dspk" compatible binding. This driver can be used
on Tegra194 chip as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Hub (AHUB) comprises a collection of hardware accelerators for
audio pre/post-processing and a programmable full crossbar (XBAR) for
routing audio data across these accelerators in time and in parallel.
AHUB supports multiple interfaces to I2S, DSPK, DMIC etc., XBAR is a
switch used to configure or modify audio routing between HW accelerators
present inside AHUB.
This patch registers AHUB component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes AHUB interfaces, which can be used to connect different
components in the ASoC layer. Currently the driver takes care of XBAR
programming to allow audio data flow through various clients of the AHUB.
Makefile and Kconfig support is added to allow to build the driver. The
AHUB component can be enabled in the DT via below compatible bindings.
- "nvidia,tegra210-ahub" for Tegra210
- "nvidia,tegra186-ahub" for Tegra186 and Tegra194
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Inter-IC Sound (I2S) controller implements full-duplex, bi-directional
and single direction point to point serial interface. It can interface
with I2S compatible devices. Tegra I2S controller can operate as both
master and slave.
This patch registers I2S controller with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes I2S interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The I2S devices can be enabled in the DT via
"nvidia,tegra210-i2s" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Digital MIC (DMIC) Controller is used to interface with Pulse Density
Modulation (PDM) input devices. The DMIC controller implements a converter
to convert PDM signals to Pulse Code Modulation (PCM) signals. From signal
flow perspective, the DMIC can be viewed as a PDM receiver.
This patch registers DMIC component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DMIC interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DMIC devices can be enabled in the DT via
"nvidia,tegra210-dmic" compatible string. This driver can be used for
Tegra186 and Tegra194 chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Client Interface (CIF) is a proprietary interface employed to route
audio samples through Audio Hub (AHUB) components by inter connecting the
various modules.
This patch exports an inline function tegra_set_cif() which can be used,
for now, to program CIF on Tegra210 and later Tegra generations. Later it
can be extended to include helpers for legacy chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1595134890-16470-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration is for EHL with the RT5660 codec. RT5660
should use "10EC5660" ID instead of "INTC1027".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers are now using .mute_stream.
Let's remove .digital_mute.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87h7u72dqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the recent inclusive terminology guidelines and replace the
word "slave" in vmaster API. I chose the word "follower" at this time
since it seems fitting for the purpose.
Note that the word "master" is kept in API, since it refers rather to
audio master volume control.
Also, while we're at it, a typo in comments is corrected, too.
Link: https://lore.kernel.org/r/20200717154517.27599-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719151705.59624-1-grandmaster@al2klimov.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed no headphone sound bug on laptop Samsung Notebook Pen S
(950SBE-951SBE), by using existing patch in Linus' tree, commit
14425f1f52 (ALSA: hda/realtek: Add quirk for Samsung Notebook).
This laptop uses the same ALC298 but different subsystem id 0x144dc812.
I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c
Signed-off-by: Joonho Wohn <doomsheart@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them. For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8Rzk0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GWlB/9Y6g9MQ4Ih4Evsv4q/ZeJRnTGaKZMT
7XjZRB64tTrFWbt38iGpRcjQLy5I5tVuGbdd7mPVKgZgSVxvoj4HQ4vf23rkNxon
RuQIbFtI2rwvdWKDo9a0RkF+IwuWhmrupfN8DMZoJIyRyh99tDrLwGjmiUUXsVV2
NyfcGerQjbngraK+2lQtnzbfX9d2qGiZVKEdczQVjJcgyNAYI2N22+3O1hFHmo80
6f5BbRpaVPXpQmRBmFthTdgthrr6uZPDXDoEYw77V9okvCwthrjBIGDow4EkVTZk
xRPKo7g2EFuLd18ro/J8nAJ1KDideKB4I5cFcz9QViVZbVftk2CrFrvg
=V/55
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them. For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.
No surprise here, just a few device-specific small fixes: two fixes
for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer
issues, while the rest are all HD-audio Realtek quirks.
-----BEGIN PGP SIGNATURE-----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=cpfK
-----END PGP SIGNATURE-----
Merge tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"No surprise here, just a few device-specific small fixes: two fixes
for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer
issues, while the rest are all HD-audio Realtek quirks"
* tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - fixup for yet another Intel reference board
ALSA: hda/realtek - Enable Speaker for ASUS UX563
ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289
ALSA: hda/realtek - change to suitable link model for ASUS platform
ALSA: usb-audio: Fix race against the error recovery URB submission
ALSA: line6: Sync the pending work cancel at disconnection
ALSA: line6: Perform sanity check for each URB creation
Some settings should set to default value after the calibration.
This patch also disables the 25MHz and 1MHz clock power when the jack unplugged.
The JD is triggered by JDH, therefore this patch removes JDL setting.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200717070228.28660-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function q6adm_open(), q6adm_alloc_copp() doesn't return
NULL. Thus use IS_ERR() to validate the returned value instead
of IS_ERR_OR_NULL(). And delete the extra line.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200714112744.20560-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pin status of the widget was connected after the sound card registered.
The rt5682_headset_detect function will use the pin status of these two widgets
to decide the certain register setting on/off.
Therefore this patch disables the pin of these two widgets in the codec probe.
This patch could avoid the misjudgment.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200717070256.28712-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is used for both CPU and Codec.
For example, soc_pcm_prepare() / soc_pcm_hw_free() are caring
both CPU and Codec.
But soc_resume_deferred() / snd_soc_suspend() are not.
This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87ft9r2dqr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
-
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/87eepb2dnq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
axg_card_add_tdm_loopback() misses to call kfree() in an error path. We
can use devm_kasprintf() to fix the issue, also improve maintainability.
So use it instead.
Fixes: c84836d7f6 ("ASoC: meson: axg-card: use modern dai_link style")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200717082242.130627-1-jingxiangfeng@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_info_get_line() has a sanity check of NULL buffer -- both buffer
itself being NULL and buffer->buffer being NULL. Basically both
checks are valid and necessary, but the problem is that it's with
snd_BUG_ON() macro that triggers WARN_ON(). The latter condition
(NULL buffer->buffer) can be met arbitrarily by user since the buffer
is allocated at the first write, so it means that user can trigger
WARN_ON() at will.
This patch addresses it by simply moving buffer->buffer NULL check out
of snd_BUG_ON() so that spurious WARNING is no longer triggered.
Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 3ad796cbc3 ("ALSA: pcm: Use SG-buffer only when
direct DMA is available") also the modification commit 467fd0e82b
("ALSA: pcm: Fix build error on m68k and others").
Poking the DMA internal helper is a layer violation, so we should
avoid that. Meanwhile the actual bug has been addressed by the
Kconfig fix in commit dbed452a07 ("dma-pool: decouple DMA_REMAP from
DMA_COHERENT_POOL"), so we can live without this hack.
Link: https://lore.kernel.org/r/20200717064130.22957-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi,
this small series is preparation for a set of bugfix ASoC patches
addressing a memleak at module unload for the HDA codec wrapper.
Instead of duplicating HDA code in ASoC tree, I chose to export
more functionality from hda_codec.c so it can be (re)used in ASoC's
hdac_hda.c.
Full series:
https://github.com/thesofproject/linux/pull/2252
Takashi and Mark, feedback is welcome on how to best handle this
kind of series where I have dependent patches both in sound/pci/hda
and in ASoC. For this series, I'm sending the patches separately
and when/if first set is merged by Takashi, I'll route the ASoC
patches via our usually SOF set to Mark.
Kai Vehmanen (2):
ALSA: hda: export snd_hda_codec_cleanup_for_unbind()
ALSA: hda: fix snd_hda_codec_cleanup() documentation
include/sound/hda_codec.h | 2 ++
sound/pci/hda/hda_codec.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
--
2.27.0
Support hp and mic detection.
Add a parameter for asoc_simple_init_jack.
Shengjiu Wang (3):
ASoC: simple-card-utils: Support configure pin_name for
asoc_simple_init_jack
ASoC: bindings: fsl-asoc-card: Support hp-det-gpio and mic-det-gpio
ASoC: fsl-asoc-card: Support Headphone and Microphone Jack detection
changes in v2:
- Add more comments in third commit
- Add Acked-by Nicolin.
.../bindings/sound/fsl-asoc-card.txt | 3 +
include/sound/simple_card_utils.h | 6 +-
sound/soc/fsl/Kconfig | 1 +
sound/soc/fsl/fsl-asoc-card.c | 77 ++++++++++++++++++-
sound/soc/generic/simple-card-utils.c | 7 +-
5 files changed, 86 insertions(+), 8 deletions(-)
--
2.27.0
Add missed return for calling soc_component_ret, otherwise the return
value is wrong.
Fixes: e2329eeba4 ("ASoC: soc-component: add soc_component_err()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1594876028-1845-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use asoc_simple_init_jack function from simple card to implement
the Headphone and Microphone detection.
Register notifier to disable Speaker when Headphone is plugged in
and enable Speaker when Headphone is unplugged.
Register notifier to disable Digital Microphone when Analog Microphone
is plugged in and enable DMIC when Analog Microphone is unplugged.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1594822179-1849-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the pin_name is fixed in asoc_simple_init_jack, but some driver
may use a different pin_name. So add a new parameter in
asoc_simple_init_jack for configuring pin_name.
If this parameter is NULL, then the default pin_name is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1594822179-1849-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87pn95wiwa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87r1tlwiwe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/87sge1wiwi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87tuyhwiwm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87wo3dwiwv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87y2ntwix0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87zh89wix5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/871rllxxhp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/873661xxhu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/874kqhxxhz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/875zaxxxi4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/878sftxxie.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87a709xxij.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87blkpxxip.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
For hdmi-codec, we need to update struct hdmi_codec_ops,
and all its users in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling "direction".
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
To prepare merging mute_stream()/digital_mute(),
this patch adds .no_capture_mute support to emulate .digital_mute().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeplxxj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() will return -ENOTSUPP if driver doesn't
support mute.
In hdmi-codec case, hdmi_codec_digital_mute() will be used for it,
and each driver has .digital_mute() callback.
hdmi_codec_digital_mute() want to return -ENOTSUPP to follow it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fta1xxjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid duplicated code for cleanup, and match the already exported
snd_hda_codec_pcm_new(), also export snd_hda_codec_cleanup_for_unbind().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200715174551.3730165-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The irq work will be manipulated by resume function, and it will report
the wrong jack type while the jack type is headphone in the button event.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200716030123.27122-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error
path. Add the missed function call to fix it.
Fixes: ba49cf6f8e ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200714080918.148196-1-jingxiangfeng@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().
Also simplify the code by inlining calculate_sha256() into its caller
and switching a debug log statement to use %*phN instead of bin2hex().
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ASUS UX563 speaker can't output.
Add quirk to link suitable model will enable it.
This model also could enable headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/96dee3ab01a04c28a7b44061e88009dd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS UX533 and UX534 speaker still can't output.
End User feedback speaker didn't have output.
Add this COEF value will enable it.
Fixes: 4e05110673 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/80334402a93b48e385f8f4841b59ae09@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
word "blacklist" appropriately.
Only a comment fix, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" appropriately.
Only comment or variable renames, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Only comment or enum/variable renames, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Correcting only comments, or error/module messages, no functional
changes.
Link: https://lore.kernel.org/r/20200714172631.25371-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Only comment or variable renames, no functional changes.
Note that pm_blacklist module option is still kept as was, so that
users can still keep the old option.
Link: https://lore.kernel.org/r/20200714172631.25371-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Only comment or variable renames, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
word "blacklist" appropriately.
Only correcting the error message, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Only comment or variable renames, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
words "whitelist" and "blacklist" appropriately.
Only comment or function/variable renames, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f34a4c9dd4 ("ALSA: hda: Enable sync-write operation as default
for all controllers") enabled sync-write for all controllers and this is
causing audio playback on the Tegra186 HDA device to fail. For now,
disable sync-write support for Tegra to fix this.
Fixes: f34a4c9dd4 ("ALSA: hda: Enable sync-write operation as default for all controllers")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200714160841.2293-1-jonathanh@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
siu is using discriminatory terms for function parameter.
This patch changes it to "secondary"
One note here is that it do nothing to DMA related naming
for now, because it needs framework level modification.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d04z3qqg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd is using discriminatory terms for function names.
This patch changes it to "secondary"
One note here is that it do nothing to DMA related naming
for now, because it needs framework level modification.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ub3qra.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This should be spin_unlock_irq() instead of spin_lock().
Fixes: 6c33125448 ("ALSA: echoaudio: Prevent races in calls to set_audio_format()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200713105324.GB251988@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add hw monitor volume control for POD HD500. The same change may
work for HD500X but I don't have it to test.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200713152852.65832-1-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer TravelMate B311R-31 laptop's audio (1025:1430) with ALC256
cannot detect the headset microphone until
ALC256_FIXUP_ACER_MIC_NO_PRESENCE quirk maps the NID 0x19 as the headset
mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200713060421.62435-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for headset mic to the ASUS ROG Zephyrus
G14(GA401) notebook series by adding the corresponding
vendor/pci_device id, as well as adding a new fixup for the used
realtek ALC289. The fixup stets the correct pin to get the headset mic
correctly recognized on audio-jack.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200711110557.18681-1-zappel@retarded.farm
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS platform couldn't need to use Headset Mode model.
It changes to the suitable model.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d05bcff170784ec7bb35023407148161@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB MIDI driver has an error recovery mechanism to resubmit the URB in
the delayed timer handler, and this may race with the standard start /
stop operations. Although both start and stop operations themselves
don't race with each other due to the umidi->mutex protection, but
this isn't applied to the timer handler.
For fixing this potential race, the following changes are applied:
- Since the timer handler can't use the mutex, we apply the
umidi->disc_lock protection at each input stream URB submission;
this also needs to change the GFP flag to GFP_ATOMIC
- Add a check of the URB refcount and skip if already submitted
- Move the timer cancel call at disconnection to the beginning of the
procedure; this assures the in-flight timer handler is gone properly
before killing all pending URBs
Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com
Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This series is a follow up for a long time ago series
(https://patchwork.kernel.org/cover/11204303/).
The old series bound too much on the patches of DRM bridge and ASoC
machine driver. And unluckily, the dependencies
(https://lore.kernel.org/patchwork/patch/1126819/) have not applied.
Revewing the ASoC patches in the old series, I found that they could be
decoupled from the DRM bridge patches. And they are harmless as it is
an optional attribute ("hdmi-codec") in DTS.
This series arranges and rebases the harmless ASoC patches for
mt8183-mt6358-ts3a227-max98357 and mt8183-da7219-max98357.
The 1st and 4th patch add an optional DT property. The 1st patch was
acked long time ago (https://patchwork.kernel.org/patch/11204321/).
The 2nd and 5th patch add DAI link for using hdmi-codec.
The 3rd and 6th patch support the HDMI jack reporting.
Tzung-Bi Shih (6):
ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec"
ASoC: mediatek: mt8183: use hdmi-codec
ASoC: mediatek: mt8183: support HDMI jack reporting
ASoC: dt-bindings: mt8183-da7219: add a property "mediatek,hdmi-codec"
ASoC: mediatek: mt8183-da7219: use hdmi-codec
ASoC: mediatek: mt8183-da7219: support HDMI jack reporting
.../bindings/sound/mt8183-da7219-max98357.txt | 4 +++
.../sound/mt8183-mt6358-ts3a227-max98357.txt | 2 ++
sound/soc/mediatek/Kconfig | 2 ++
.../mediatek/mt8183/mt8183-da7219-max98357.c | 29 +++++++++++++++++--
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 29 +++++++++++++++++--
5 files changed, 60 insertions(+), 6 deletions(-)
--
2.27.0.383.g050319c2ae-goog
Both Lee Jones and I submitted separate series, this is the second
part of the merged result, for which no feedback was provided.
I picked Lee's patches for rt5659 and ak4458 and added the pxa and
ux500 that I didn't fix. The rest is largely identical between our
respective series, with the exception of the sunxi which I documented
and Lee removed. I don't have any specific preference and will go with
the flow on this.
Changes since v3:
Improved commit subjects from 'fix kernel-doc' as suggested by Lee
Jones. In a couple of cases I just reverted to Lee's patches when the
code was identical.
Added a couple of CC: tags from Lee's patches.
Added Arnaud Pouliquen's Acked-by tag in first patch.
Lee Jones (6):
ASoC: sunxi: sun4i-spdif: Fix misspelling of 'reg_dac_txdata' in
kernel-doc
ASoC: pxa: pxa-ssp: Demote seemingly unintentional kerneldoc header
ASoC: ux500: ux500_msp_i2s: Remove unused variables 'reg_val_DR' and
'reg_val_TSTDR'
ASoC: codecs: rt5659: Remove many unused const variables
ASoC: codecs: tlv320aic26: Demote seemingly unintentional kerneldoc
header
ASoC: codecs: ak4458: Remove set but never checked variable 'ret'
Pierre-Louis Bossart (4):
ASoC: sti: uniperif: fix 'defined by not used' warning
ASoC: qcom: qdsp6: q6asm: Provide documentation for 'codec_profile'
ASoC: sunxi: sun4i-i2s: add missing clock and format arguments in
kernel-doc
ASoC: codecs: rt5631: fix spurious kernel-doc start and missing
arguments
sound/soc/codecs/ak4458.c | 6 +++---
sound/soc/codecs/rt5631.c | 8 +++++--
sound/soc/codecs/rt5659.c | 37 ---------------------------------
sound/soc/codecs/tlv320aic26.c | 2 +-
sound/soc/pxa/pxa-ssp.c | 2 +-
sound/soc/qcom/qdsp6/q6asm.c | 2 +-
sound/soc/sti/uniperif.h | 2 +-
sound/soc/sunxi/sun4i-i2s.c | 10 ++++++++-
sound/soc/sunxi/sun4i-spdif.c | 2 +-
sound/soc/ux500/ux500_msp_i2s.c | 8 +++----
10 files changed, 27 insertions(+), 52 deletions(-)
base-commit: 6940701c71
--
2.25.1
Clear the validity bit for TX
Add kctl for configuring TX validity bit
Shengjiu Wang (2):
ASoC: fsl_spdif: Clear the validity bit for TX
ASoC: fsl_spdif: Add kctl for configuring TX validity bit
sound/soc/fsl/fsl_spdif.c | 51 ++++++++++++++++++++++++++++++++++++---
1 file changed, 47 insertions(+), 4 deletions(-)
--
2.21.0
As Pierre-Louis Bossart pointed out, saying that the default mode for the
SSP is TDM 4 slot is not entirely accurate.
There really are 2 default modes:
The default mode for the SSP configuration is TDM 4 slot for the
cpu-dai (hard-coded in DSP firmware),
The default mode for the SSP configuration is I2S for the codec-dai
(hard-coded in the 'SSP2-Codec" .dai_fmt masks, so far unused).
This commit updates the comment in cht_codec_fixup() to properly reflect
this.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200703103840.333732-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add one kctl for configuring TX validity bit from user
space.
The type of this kctl is boolean:
on - Outgoing validity always set
off - Outgoing validity always clear
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1594112066-31297-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In IEC958 spec, "The validity bit is logical "0" if the
information in the main data field is reliable, and it
is logical "1" if it is not".
The default value of "ValCtrl" is zero, which means
"Outgoing Validity always set", then all the data is not
reliable, then some spdif sink device will drop the data.
So set "ValCtrl" to 1, that is to clear "Outgoing Validity"
in default.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1594112066-31297-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recently syzkaller reported a UAF in LINE6 driver, and it's likely
because we call cancel_delayed_work() at the disconnect callback
instead of cancel_delayed_work_sync(). Let's use the correct one
instead.
Reported-by: syzbot+145012a46658ac00fc9e@syzkaller.appspotmail.com
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hlfjr4gio.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
LINE6 drivers create stream URBs with a fixed pipe without checking
its validity, and this may lead to a kernel WARNING at the submission
when a malformed USB descriptor is passed.
For avoiding the kernel warning, perform the similar sanity checks for
each pipe type at creating a URB.
Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Looks as though the result of snd_soc_update_bits() has never been checked.
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/ak4458.c: In function ‘ak4458_set_dai_mute’:
sound/soc/codecs/ak4458.c:408:16: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
Cc: Mihai Serban <mihai.serban@nxp.com>
Link: https://lore.kernel.org/r/20200709162328.259586-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the only use of kerneldoc in the sourcefile and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/tlv320aic26.c:138: warning: Function parameter or
member 'dai' not described in 'aic26_mute'
sound/soc/codecs/tlv320aic26.c:138: warning: Function parameter or
member 'mute' not described in 'aic26_mute'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Link: https://lore.kernel.org/r/20200709162328.259586-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks as though they've never been used.
Fixes the following W=1 kernel build warning(s):
In file included from sound/soc/codecs/rt5659.c:25:
In file included from sound/soc/codecs/rt5659.c:25:
sound/soc/codecs/rt5659.c:1232:2: warning: ‘rt5659_ad_monor_asrc_enum’ defined but not used [-Wunused-const-variable=]
1232 | rt5659_ad_monor_asrc_enum, RT5659_ASRC_3, RT5659_AD_MONO_R_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1231:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1231 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1228:2: warning: ‘rt5659_ad_monol_asrc_enum’ defined but not used [-Wunused-const-variable=]
1228 | rt5659_ad_monol_asrc_enum, RT5659_ASRC_3, RT5659_AD_MONO_L_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1227:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1227 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1224:2: warning: ‘rt5659_ad_sto2_asrc_enum’ defined but not used [-Wunused-const-variable=]
1224 | rt5659_ad_sto2_asrc_enum, RT5659_ASRC_3, RT5659_AD_STO2_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1223:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1223 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1220:2: warning: ‘rt5659_ad_sto1_asrc_enum’ defined but not used [-Wunused-const-variable=]
1220 | rt5659_ad_sto1_asrc_enum, RT5659_ASRC_2, RT5659_AD_STO1_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1219:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1219 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1216:2: warning: ‘rt5659_da_monor_asrc_enum’ defined but not used [-Wunused-const-variable=]
1216 | rt5659_da_monor_asrc_enum, RT5659_ASRC_2, RT5659_DA_MONO_R_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1215:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1215 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1212:2: warning: ‘rt5659_da_monol_asrc_enum’ defined but not used [-Wunused-const-variable=]
1212 | rt5659_da_monol_asrc_enum, RT5659_ASRC_2, RT5659_DA_MONO_L_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1211:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1211 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1208:2: warning: ‘rt5659_da_sto_asrc_enum’ defined but not used [-Wunused-const-variable=]
1208 | rt5659_da_sto_asrc_enum, RT5659_ASRC_2, RT5659_DA_STO_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1207:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1207 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200709162328.259586-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'component' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'reg' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'value' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:82: warning: Function parameter or member
'component' not described in 'rt5631_read_index'
sound/soc/codecs/rt5631.c:82: warning: Function parameter or member
'reg' not described in 'rt5631_read_index'
sound/soc/codecs/rt5631.c:367: warning: Function parameter or member
'component' not described in 'onebit_depop_power_stage'
sound/soc/codecs/rt5631.c:405: warning: Function parameter or member
'component' not described in 'onebit_depop_mute_stage'
sound/soc/codecs/rt5631.c:443: warning: Function parameter or member
'component' not described in 'depop_seq_power_stage'
sound/soc/codecs/rt5631.c:515: warning: Function parameter or member
'component' not described in 'depop_seq_mute_stage'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200709162328.259586-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like these have been unchecked since the driver's inception in 2012.
Fixes the following W=1 kernel build warning(s):
sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_rx’:
sound/soc/ux500/ux500_msp_i2s.c:398:6: warning: variable ‘reg_val_DR’
set but not used [-Wunused-but-set-variable]
sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_tx’:
sound/soc/ux500/ux500_msp_i2s.c:415:6: warning: variable
‘reg_val_TSTDR’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Roger Nilsson <roger.xr.nilsson@stericsson.com>
Cc: Sandeep Kaushik <sandeep.kaushik@st.com>
Link: https://lore.kernel.org/r/20200709162328.259586-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the only use of kerneldoc in the sourcefile and full
descriptions are not provided.
Fixes the following W=1 kernel build warning(s):
sound/soc/pxa/pxa-ssp.c:186: warning: Function parameter or member
'ssp' not described in 'pxa_ssp_set_scr'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lore.kernel.org/r/20200709162328.259586-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Property name descriptions need to match exactly.
Fixes the following W=1 kernel build warning(s):
sound/soc/sunxi/sun4i-spdif.c:178: warning: Function parameter or
member 'reg_dac_txdata' not described in 'sun4i_spdif_quirks'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Andrea Venturi <be17068@iperbole.bo.it>
Cc: Marcus Cooper <codekipper@gmail.com>
Link: https://lore.kernel.org/r/20200709162328.259586-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings - missing fields in description
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or
member 'bclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'num_bclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'mclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'num_mclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_bclk_parent_rate' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_sr' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_wss' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'set_chan_cfg' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'set_fmt' not described in 'sun4i_i2s_quirks'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Andrea Venturi <be17068@iperbole.bo.it>
Link: https://lore.kernel.org/r/20200709162328.259586-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
sound/soc/qcom/qdsp6/q6asm.c:924: warning: Function parameter or
member 'codec_profile' not described in 'q6asm_open_write'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200709162328.259586-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning. The table uni_tdm_hw is declared in a header included
by multiple C file. This isn't really a good practice but for now
using __maybe_unused makes the following warning go away.
sound/soc/sti/sti_uniperif.c:12:
sound/soc/sti/uniperif.h:1351:38: warning: ‘uni_tdm_hw’ defined but
not used [-Wunused-const-variable=]
1351 | static const struct snd_pcm_hardware uni_tdm_hw = {
| ^~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200709162328.259586-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series tries to reuse mt8183-da7219-max98357.c for supporting machine
driver with rt1015 speaker amplifier.
The first 3 patches refactor the code for easier to change for subsequent
patches.
The 4th patch adds document for the new proposed compatible string.
The 5th patch changes the machine driver to support either "MAX98357A" or
"RT1015" codecs.
Tzung-Bi Shih (5):
ASoC: mediatek: mt8183-da7219: sort header inclusions in alphabetical
ASoC: mediatek: mt8183-da7219: remove forward declaration of
headset_init
ASoC: mediatek: mt8183-da7219: extract codec and DAI names
ASoC: mediatek: mt8183-da7219: add compatible string for using rt1015
ASoC: mediatek: mt8183-da7219: support machine driver with rt1015
.../bindings/sound/mt8183-da7219-max98357.txt | 5 +-
sound/soc/mediatek/Kconfig | 5 +-
.../mediatek/mt8183/mt8183-da7219-max98357.c | 244 ++++++++++++++----
3 files changed, 197 insertions(+), 57 deletions(-)
--
2.27.0.383.g050319c2ae-goog
Add the TX offset slot programming. There is no RX offset slot
register.
Since there is no RX offset the check for slot symmetry can be removed.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200709185129.10505-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CPU and the codec both are represented now as components, so for
PDMIC we are registering two componenets with the same name. Since
there is no actual codec, we will merge the codec component into the
CPU one and use a dummy codec instead, for the DAI link.
As a bonus, debugfs will no longer report an error when will try to
create entries for both componenets with the same name.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200708163359.2698696-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CPU and the codec both are represented now as components, so for
CLASS-D we are registering two componenets with the same name. Since
there is no actual codec, we will merge the codec component into the
CPU one and use a dummy codec instead, for the DAI link.
As a bonus, debugfs will no longer report an error when will try to
create entries for both componenets with the same name.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200708101249.2626560-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning and removed unused table. In this case this a
duplicate of
static const struct of_device_id max98390_of_match[] = {
{ .compatible = "maxim,max98390", },
{}
};
MODULE_DEVICE_TABLE(of, max98390_of_match);
already used in the rest of the code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707190612.97799-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like 'w' has remained unchecked since the driver's inception.
Fixes the following W=1 kernel build warning(s):
sound/soc/ti/omap-mcbsp-st.c: In function ‘omap_mcbsp_st_chgain’:
sound/soc/ti/omap-mcbsp-st.c:145:6: warning: variable ‘w’ set but not used [-Wunused-but-set-variable]
Peter suggested that the whole read can be removed, so that's
been done too.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Samuel Ortiz <samuel.ortiz@nokia.com>
Cc: linux-omap@vger.kernel.org
Link: https://lore.kernel.org/r/20200707190612.97799-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
In file included from include/sound/tlv.h:10,
from sound/soc/codecs/jz4770.c:19:
sound/soc/codecs/jz4770.c:306:35: warning: ‘mic_boost_tlv’ defined but not used [-Wunused-const-variable=]
306 | static const DECLARE_TLV_DB_SCALE(mic_boost_tlv, 0, 400, 0);
| ^~~~~~~~~~~~~
include/uapi/sound/tlv.h:64:15: note: in definition of macro ‘SNDRV_CTL_TLVD_DECLARE_DB_SCALE’
64 | unsigned int name[] = { | ^~~~
sound/soc/codecs/jz4770.c:306:14: note: in expansion of macro ‘DECLARE_TLV_DB_SCALE’
306 | static const DECLARE_TLV_DB_SCALE(mic_boost_tlv, 0, 400, 0);
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: ter Huurne <maarten@treewalker.org>
Link: https://lore.kernel.org/r/20200707190612.97799-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning, the kernel-doc syntax was probably from Doxygen?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200707190612.97799-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings - missing fields in structure
Credits to Sylwester Nawrocki for the pclk and cclk descriptions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200707190612.97799-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning
Kernel-doc is not used in one file and missing argument in the second.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200707190612.97799-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable Left and Right Spk pin after boot so that sof can get
suspended.
This follows the same logic added to another machine driver with
commit 94d2d08974 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger function")
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reflect Kconfig changes and add both SoundWire and I2C modes
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SoundWire specific parts and extend common ones already split from
I2C.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare support for SoundWire, let's first split the I2C and common
parts. No new functionality, just indents and formatting to make
checkpatch happy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Supports machine driver with rt1015 ("mt8183-da7219-rt1015"). Embeds in
existing mt8183-da7219-max98357.c because they share most of the code.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200709122445.1584497-6-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HV/VREF should not turn off if the headphone jack plug-in.
This patch could solve the unexpected interrupt issue in some devices.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200709101345.11449-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie.
inverted frame clock is not support in this mode).
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few places (except for ASoC) are left unconverted for the new
fallthrough pseudo keyword. Now replace them all.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "fall through" comments found in switch-cases in ALSA xen driver
are all superfluous. The kernel coding style allows the multiple
cases in a row. Let's remove them.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comments about fall through in sound/atmel/ac97.c are just
superfluous and rather confusing. Let's remove them.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Distorted audio appears occasionally, affecting either playback or
capture and requiring the affected substream to be closed by all
applications and re-opened.
The best way I have found to reproduce the bug is to use dmix in
combination with Chromium, which opens the audio device multiple times
in threads. Anecdotally, the problems appear to have increased with
faster CPUs. I ruled out 32-bit counter wrapping; it often happens
much earlier.
Since applying this patch I have not had problems, where previously
they would occur several times a day.
The patch targets the following issues:
* Check for progress using the counter from the hardware, not after it
has been truncated to the buffer.
This is a clean way to address a possible bug where if a whole
ringbuffer advances between interrupts, it goes unnoticed.
* Move last_period state from chip to pipe
This more logically belongs as part of pipe, and code is reasier to
read if it is "counter position last time a period elapsed".
Now the code has no references to period count. A period is just
when the regular counter crosses a threshold. This increases
readability and reduces scope for bugs.
* Treat period notification and buffer advance independently:
This helps to clarify what is the responsibility of the interrupt
handler, and what is pcm_pointer().
Removing shared state between these operations means race conditions
are fixed without introducing locks. Synchronisation is only around
the read of pipe->dma_counter. There may be cache line contention
around "struct audiopipe" but I did not have cause to profile this.
Pay attention to be robust where dma_counter wrapping is not a
multiple of period_size or buffer_size.
This is a revised patch based on feedback from Takashi and Giuliano.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-5-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are valid conditions in normal circumstances, so do not "warn" but
make them for debugging.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-4-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use of atomics does not make these statements robust:
atomic_inc(&chip->opencount);
if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
chip->can_set_rate=0;
and
if (atomic_read(&chip->opencount)) {
if (chip->opencount) {
changed = -EAGAIN;
} else {
changed = set_digital_mode(chip, dmode);
It would be necessary to atomically increment or decrement the value
and use the returned result. And yet we still need to prevent other
threads making use of "can_set_rate" while we set it.
However in all but one case the atomic is misleading as they are already
running with "mode_mutex" held.
Decisions are made on mode setting are often intrinsically connected
to "opencount" because some operations are not permitted unless
there is sole ownership.
So instead simplify this, and use "mode_mutex" as a lock for all reference
counting and mode setting.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-2-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This check is always false, as it's not the responsibilty of the
device-specific code to make this check. It is already checked
in snd_echo_digital_mode_put.
I do not have a Mona interface to test this change.
This patch is in preparation for follow-up patch to modify the
behavior of "opencount".
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-1-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small, mostly device-specific fixes.
The significant one is the regression fix for USB-audio implicit
feedback devices due to the incorrect frame size calculation, which
landed in 5.8 and stable trees. In addition, a few usual HD-audio
and USB-audio quirks, Intel HDMI fixes, ASoC fsl and rt5682 fixes,
as well as the fix in compress-offload partial drain operation.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl8EhgkOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9Vgg/8CsHDhio415pxnrz/KtbcHhFyjUz5Uh0VoLs2
OJzO78BP0rL5C9RhqZN0oa88bjo/fQcRBhdvnsE7OyoM+Jm+icg3k/to41S8TWQ7
3GBViwu9C9RTMfU4yQ6KeGP5vk5KfZ5xTTkBQqscVRrolMevvgc0iSHen/J5lEQ4
O+QnRKdqL0Hv2zaBKgmkGymMR7lXa9x4TQ3X0Cm69G7G5XRdaX4RqfoUmB62PjXt
09wH7V7kc6Zqn+C2M95q4uEno6I/WF+2cJ+QjbYXinnQIK3HQkAzAPthTYgP0Thl
uM6AmwAWkuE6H1vScl5a/MlXeHGJjseBrjxtfZgVEE6TPFjxYlXzWrm/gtISSvbk
bZ111cRyW3c1ouphJvHIWvBj5rr3C1VgpQ0FwWK9t1RICN6csP/eTmKPICpCOy2O
OPOhcZRKvl9dBsfqPOmXkDBUHTbLlSJ/8fHVWgK0H+F2t2IkSP6Q2lBhhb3MDQTZ
8LL4YdBBNgbiTFXp4zG3ngRhmO8PCDs0oUrIzMDFk/7w50C8CjFG+l6tpKH9g/UL
KlihbKocy0kFTUvD93WumgTvjHgmNvCn2oOECAZQ3h7Vcxu5W1L8AA0AsxufQ9xE
8j3XXBCCiECYuJ7WUUy6teqngTosmMiZFHO9aE8nsr3K3HMiQuz7cv34n1zCJPnc
FdJkgKk=
=gDdf
-----END PGP SIGNATURE-----
Merge tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small, mostly device-specific fixes.
The significant one is the regression fix for USB-audio implicit
feedback devices due to the incorrect frame size calculation, which
landed in 5.8 and stable trees.
In addition, a few usual HD-audio and USB-audio quirks, Intel HDMI
fixes, ASoC fsl and rt5682 fixes, as well as the fix in
compress-offload partial drain operation"
* tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: compress: fix partial_drain completion state
ALSA: usb-audio: Add implicit feedback quirk for RTX6001
ALSA: usb-audio: add quirk for MacroSilicon MS2109
ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VC
ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VC
ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VC
ALSA: hda/realtek - Fix Lenovo Thinkpad X1 Carbon 7th quirk subdevice id
ALSA: hda/hdmi: improve debug traces for stream lookups
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
ALSA: opl3: fix infoleak in opl3
ALSA: usb-audio: Replace s/frame/packet/ where appropriate
ALSA: usb-audio: Fix packet size calculation
AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module
ALSA: hda - let hs_mic be picked ahead of hp_mic
ASoC: rt5682: fix the pop noise while OMTP type headset plugin
ASoC: fsl_mqs: Fix unchecked return value for clk_prepare_enable
ASoC: fsl_mqs: Don't check clock is NULL before calling clk API
This series tries to reuse mt8183-mt6358-ts3a227-max98357.c for supporting
machine driver with rt1015 speaker amplifier.
The 1st patch is straightforward: re-order the header inclusions.
The 2nd patch adds document for the new proposed compatible string.
The 3rd patch changes the machine driver to support either "MAX98357A" or
"RT1015" codecs.
Tzung-Bi Shih (3):
ASoC: mediatek: mt8183: sort header inclusions in alphabetical
dt-bindings: mt8183: add compatible string for using rt1015
ASoC: mediatek: mt8183: support machine driver with rt1015
.../sound/mt8183-mt6358-ts3a227-max98357.txt | 5 +-
sound/soc/mediatek/Kconfig | 5 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 171 +++++++++++++++---
3 files changed, 153 insertions(+), 28 deletions(-)
--
2.27.0.383.g050319c2ae-goog
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac579
--
2.25.1
This patchset adds gapless compressed audio support on q6asm.
Gapless on q6asm is implemented using 2 streams in a single asm session.
First few patches are enhacements done to q6asm interface to allow
stream id per each command, gapless flags and silence meta data.
Along with this there are few trivial changes which I thought are necessary!
Last patch implements copy callback to allow finer control over buffer offsets,
specially in partial drain cases.
This patchset is tested on RB3 aka DB845c platform.
Thanks,
srini
Srinivas Kandagatla (11):
ASoC: q6asm: add command opcode to timeout error report
ASoC: q6asm: rename misleading session id variable
ASoC: q6asm: make commands specific to streams
ASoC: q6asm: use flags directly from asm-dai
ASoC: q6asm: add length to write command token
ASoC: q6asm: add support to remove intial and trailing silence
ASoC: q6asm: add support to gapless flag in asm open
ASoC: q6asm-dai: add next track metadata support
ASoC: qdsp6: use dev_err instead of pr_err
ASoC: qdsp6-dai: add gapless support
ASoC: q6asm-dai: add support to copy callback
sound/soc/qcom/qdsp6/q6asm-dai.c | 397 +++++++++++++++++++++++--------
sound/soc/qcom/qdsp6/q6asm.c | 173 +++++++++-----
sound/soc/qcom/qdsp6/q6asm.h | 48 ++--
3 files changed, 458 insertions(+), 160 deletions(-)
--
2.21.0
Supports machine driver with rt1015 ("mt8183-mt6358-ts3a227-rt1015").
Embeds in existing mt8183-mt6358-ts3a227-max98357.c because they share
most of the code.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200708113233.3994206-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the error reporting more useful by adding opcode to it.
Without this its almost impossible to say which command actually
timed out.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200707163641.17113-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is hopefully the last set of fixes to avoid probe errors due to
stricter checks of DAI capabilities introduced late in the 5.8 cycle.
Daniel Baluta (1):
ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M
Pierre-Louis Bossart (2):
ASoC: soc-dai: set dai_link dpcm_ flags with a helper
ASoC: Intel: bdw-rt5677: fix non BE conversion
include/sound/soc-dai.h | 1 +
sound/soc/generic/audio-graph-card.c | 4 +--
sound/soc/generic/simple-card.c | 4 +--
sound/soc/intel/boards/bdw-rt5677.c | 1 +
sound/soc/soc-dai.c | 38 ++++++++++++++++++++++++++++
sound/soc/sof/imx/imx8.c | 8 ++++++
sound/soc/sof/imx/imx8m.c | 8 ++++++
7 files changed, 60 insertions(+), 4 deletions(-)
base-commit: a5911ac579
--
2.25.1
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac579
--
2.25.1
The DSP should be notified for device removal only if the
probe was successful. Fixes the following KASAN bug:
BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707204027.114169-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Idle_bias_on is used to decide bias on/off in standby state by dapm.
When Idle_bias_on is set to one, dapm will keep max98373 active at
idle time. Max98373 is doing nothing in this state, so remove
idle_bias_on setting to let max98373 get suspended when it is idle.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ryan Lee <ryans.lee@maximintegrated.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707205740.114927-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Volume control in probe function is not necessary.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707205740.114927-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add more dev_err() logs to help trace topology load failures, since we
have multiple error causes (e.g. invalid header or header that could
not be loaded).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to repeat the same thing multiple times when it can be done in
one location.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the beginning of the topology, the code continues to the next
object even when an error is detected.
The topology should be handled with an all-or-nothing design, loading
a partially valid topology is a sure way to get bug reports that are
difficult to deal with.
Changing the behavior may break previous solutions and expose problems
in topology files delivered in the past, so it's probably not wise to
add this patch to stable branches without revalidation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we need to free all allocated tlvs, not just the one allocated in
the loop before releasing kcontrols - other the tlvs references will
leak.
Fixes: 9f90af3a99 ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When errors happens while loading graph components, the kernel oopses
while trying to remove all topology components. This can be
root-caused to a list pointing to memory that was already freed on
error.
remove_route() is already called on errors and will perform the
required cleanups so there's no need to free the route memory in
soc_tplg_dapm_graph_elems_load() if the route was added to the
list. We do however want to free the routes allocated but not added to
the list.
Fixes: 7df04ea7a3 ('ASoC: topology: modify dapm route loading routine and add dapm route unloading')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is identical with change for Intel platforms done with
commit 8c05246c0b ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell")
and fixes a regression on i.MX8/i.MX8M:
[ 25.705750] esai-Codec: ASoC: no backend playback stream
[ 27.923378] esai-Codec: ASoC: no users playback at close - state
This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.
Fixes: 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SOF is used, the normal links are converted into DPCM ones. This
generates an error
[ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd
Wake on Voice does not support playback
[ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on
Voice :-22
Fix by forcing the capture direction.
Fixes: b73287f0b0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper to walk through all the DAIs and set dpcm_playback and
dpcm_capture flags based on the DAIs capabilities, and use this helper
to avoid setting these flags arbitrarily in generic cards.
The commit referenced in the Fixes tag did not introduce the
configuration issue but will prevent the card from probing when
detecting invalid configurations.
Fixes: b73287f0b0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning. Variables are declared in a header file included from
multiple C files, replace by #defines as suggested by Takashi
sound/usb/line6/driver.h:70:18: warning: ‘SYSEX_EXTRA_SIZE’ defined
but not used [-Wunused-const-variable=]
70 | static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
| ^~~~~~~~~~~~~~~~
sound/usb/line6/driver.h:69:18: warning: ‘SYSEX_DATA_OFS’ defined but
not used [-Wunused-const-variable=]
69 | static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
| ^~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707184924.96291-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200626164623.87894-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 3ad796cbc3 ("ALSA: pcm: Use SG-buffer only when direct
DMA is available") introduced a check of the DMA type and this caused
a build error on m68k (and possibly some others) due to the lack of
dma_is_direct() definition. Since the check is needed only for
CONFIG_SND_DMA_SGBUF enablement (i.e. solely x86), use #ifdef instead
of IS_ENABLED() for avoiding such a build error.
Fixes: 3ad796cbc3 ("ALSA: pcm: Use SG-buffer only when direct DMA is available")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200707111225.26826-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASoC devm_ functions that register a component
(devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will
clean their component by running snd_soc_unregister_component.
snd_soc_unregister_component will then remove all the components for the
device that was used to register the component in the first place.
However, some drivers register several components (such as a DAI and a
dmaengine PCM) on the same device, and if the dmaengine PCM is registered
first, then the DAI will be cleaned up first and
snd_dmaengine_pcm_unregister will be called next.
snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component
on the device, and if there's one unregister that component and release its
dmaengine channels. That doesn't happen in practice though since the first
call to snd_soc_unregister_component removed all the components, so we
never get the chance to release the dmaengine channels.
In order to fix this, instead of removing all the components for a given
device, we can simply remove the component that was registered in the first
place. We should have the same number of component registration than we
have components, so it should work just fine.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
External HDMI receivers have analog circuitry that needs to be powered-on
when exiting standby, and a mechanism to detect PCM v. IEC61937 data.
These two steps take time and up to 2-3 seconds of audio may be muted
when starting playback.
Intel hardware (Haswell and beyond) can keep the link active
with a 'silent stream', so that the receiver does not go through those
two steps when valid audio is transmitted. This mechanism relies
on an setting the channel_id as 0xf, sending info packet and preventing
the codec from going to D3, which will increase the platform
static power consumption. The info packet assumes a basic 2ch stereo,
and the silent stream is enabled when connecting a monitor.
In case of format changes the detection of PCM v. IEC61937 needs to
be re-run. In this case there is no way to avoid the 2-3s mute.
The silent stream is enabled with a Kconfig option, as well as a kernel
parameter should there be a need to override the build time default.
This approach is used based on the power_save capability as an example,
but in the future, it may be used with a kcontrol,
depending on UCM support for HDaudio legacy.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Emmanuel Jillela <emmanuel.jillela@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1594068797-14011-1-git-send-email-harshapriya.n@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning.
sound/drivers/vx/vx_core.c: In function ‘snd_vx_threaded_irq_handler’:
sound/drivers/vx/vx_core.c:515:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
515 | ; /* so far, nothing to do yet */
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warnings. Mark variables as __always_unused.
sound/pci/via82xx.c: In function ‘snd_via82xx_codec_wait’:
sound/pci/via82xx.c:547:6: warning: variable ‘err’ set but not used
[-Wunused-but-set-variable]
547 | int err;
| ^~~
sound/pci/via82xx_modem.c: In function ‘snd_via82xx_codec_wait’:
sound/pci/via82xx_modem.c:401:6: warning: variable ‘err’ set but not
used [-Wunused-but-set-variable]
401 | int err;
| ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning. Mark the 'audiostatus' variable as __always_unused.
sound/pci/es1938.c: In function ‘snd_es1938_interrupt’:
sound/pci/es1938.c:1622:24: warning: variable ‘audiostatus’ set but
not used [-Wunused-but-set-variable]
1622 | unsigned char status, audiostatus;
| ^~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning. Mark the 'req' variable as __always_unused.
sound/xen/xen_snd_front.c: In function ‘xen_snd_front_stream_close’:
sound/xen/xen_snd_front.c:117:21: warning: variable ‘req’ set but not
used [-Wunused-but-set-variable]
117 | struct xensnd_req *req;
| ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warnings. Two variables are only used for debug logs, mark
with __maybe_unused:
sound/pci/korg1212/korg1212.c: In function ‘snd_korg1212_create’:
sound/pci/korg1212/korg1212.c:2152:36: warning: variable ‘iomem2_size’
set but not used [-Wunused-but-set-variable]
2152 | unsigned ioport_size, iomem_size, iomem2_size;
| ^~~~~~~~~~~
sound/pci/korg1212/korg1212.c:2152:11: warning: variable ‘ioport_size’
set but not used [-Wunused-but-set-variable]
2152 | unsigned ioport_size, iomem_size, iomem2_size;
| ^~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning. The loopsize variable is only used in compiled-out
code, so mark with __maybe_unused.
sound/pci/emu10k1/emu10k1_patch.c: In function
‘snd_emu10k1_sample_new’:
sound/pci/emu10k1/emu10k1_patch.c:30:22: warning: variable ‘loopsize’
set but not used [-Wunused-but-set-variable]
30 | int truesize, size, loopsize, blocksize;
| ^~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warnings. Mark variables used for reads as __always_unused.
sound/pci/emu10k1/emu10k1_main.c: In function
‘snd_emu10k1_cardbus_init’:
sound/pci/emu10k1/emu10k1_main.c:626:15: warning: variable ‘value’ set
but not used [-Wunused-but-set-variable]
626 | unsigned int value;
| ^~~~~
sound/pci/emu10k1/emu10k1_main.c: In function
‘snd_emu1010_load_firmware_entry’:
sound/pci/emu10k1/emu10k1_main.c:656:15: warning: variable
‘write_post’ set but not used [-Wunused-but-set-variable]
656 | unsigned int write_post;
| ^~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning by nothing variable as always unused.
sound/pci/aw2/aw2-saa7146.c: In function ‘snd_aw2_saa7146_interrupt’:
sound/pci/aw2/aw2-saa7146.c:333:15: warning: variable ‘iicsta’ set but
not used [-Wunused-but-set-variable]
333 | unsigned int iicsta;
| ^~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning. One variable is only used in a conditionally-compiled
block, mark as __maybe_unused
sound/pci/echoaudio/echoaudio.c: In function ‘snd_echo_probe’:
sound/pci/echoaudio/echoaudio.c:1958:6: warning: variable ‘i’ set but
not used [-Wunused-but-set-variable]
1958 | int i, err;
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warnings, mark variables as __always_unused
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’:
sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
1907 | u32 num_bands;
| ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’:
sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
1934 | u32 num_bands;
| ^~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warnings by removing 2 unnecessary initializations and
removing a variable that's not used.
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’:
sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
1907 | u32 num_bands = 0;
| ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’:
sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
1934 | u32 num_bands = 0;
| ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_mux_info’:
sound/pci/asihpi/asihpi.c:2164:6: warning: variable ‘err’ set but not
used [-Wunused-but-set-variable]
2164 | int err;
| ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning by noting variable as __always_unused.
sound/isa/gus/gus_uart.c: In function ‘snd_gf1_interrupt_midi_in’:
sound/isa/gus/gus_uart.c:16:22: warning: variable ‘data’ set but not
used [-Wunused-but-set-variable]
16 | unsigned char stat, data, byte;
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams
While at it, add locks for stream state change in
snd_compr_drain_notify() as well.
Fixes: f44f2a5417 ("ALSA: compress: fix drain calls blocking other compress functions (v6)")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB Audio analyzer RTX6001 uses the same implicit feedback quirk
as other XMOS-based devices.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/822f0f20-1886-6884-a6b2-d11c685cbafa@ivitera.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Veriton N4660G desktop's audio (1025:1248) with ALC269VC cannot
detect the headset microphone until ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE
quirk maps the NID 0x18 as the headset mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Aspire C20-820 AIO's audio (1025:1065) with ALC269VC can't
detect the headset microphone until ALC269VC_FIXUP_ACER_HEADSET_MIC
quirk maps the NID 0x18 as the headset mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-2-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer desktop vCopperbox with ALC269VC cannot detect the MIC of
headset, the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200706071826.39726-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
1)
In snd_hda_pick_fixup(), quirks are first matched by PCI SSID and then, if
there is no match, by codec SSID. The Lenovo "ThinkPad X1 Carbon 7th" has
an audio chip with PCI SSID 0x2292 and codec SSID 0x2293[1]. Therefore, fix
the quirk meant for that device to match on .subdevice == 0x2292.
2)
The "Thinkpad X1 Yoga 7th" does not exist. The companion product to the
Carbon 7th is the Yoga 4th. That device has an audio chip with PCI SSID
0x2292 and codec SSID 0x2292[2]. Given the behavior of
snd_hda_pick_fixup(), it is not possible to have a separate quirk for the
Yoga based on SSID. Therefore, merge the quirks meant for the Carbon and
Yoga. This preserves the current behavior for the Yoga.
[1] This is the case on my own machine and can also be checked here
https://github.com/linuxhw/LsPCI/tree/master/Notebook/Lenovo/ThinkPadhttps://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3225701
[2]
https://github.com/linuxhw/LsPCI/tree/master/Convertible/Lenovo/ThinkPadhttps://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3176355
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Fixes: 54a6a7dc10 ("ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen")
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Kailang Yang <kailang@realtek.com>
Tested-by: Vincent Bernat <vincent@bernat.ch>
Tested-by: Even Brenden <evenbrenden@gmail.com>
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200703080005.8942-2-benjamin.poirier@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec driver has two debug traces printed from different
functions but with identical message content:
"HDMI: hinfo 000000006a6b84d9 not registered"
Fix this duplication and also add a bit more context in addition to raw
object pointer, to help analysis of kernel logs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.
The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.
The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.
BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The stack object “info” in snd_opl3_ioctl() has a leaking problem.
It has 2 padding bytes which are not initialized and leaked via
“copy_to_user”.
Signed-off-by: xidongwang <wangxidong_97@163.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here is in essence a resend of my 2 cleanup patches for the rt5670 ASoC
codec code, rebased on top of broonie/sound/for-5.9 with
broonie/sound/for-5.8 merged in.
Regards,
Hans
p.s.
I'll also send out the patch improving the comment in
cht_bsw_rt5672.c cht_codec_fixup() which Pierre-Louis requested soon.
Fix W=1 warnings. The kernel-doc support is partial, add more
descriptions and follow proper syntax
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200702192141.168018-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add logic to check DMIC hardware exists or not on
the platform at runtime.
Add module param for overriding DMIC hardware check
at runtime.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1593710826-1106-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing unlock before return from function j721e_audio_hw_params()
in the error handling case.
Fixes: 6748d05590 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200703030910.75047-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings. The kernel-doc support is partial, add more
descriptions and follow proper syntax
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200702192141.168018-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the not really descriptive dev_gpio quirk / setting to
gpio1_is_irq, which describes what it actually does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200703100823.258033-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_data is an obsolete concept, instead device_properties,
set through e.g. device-tree, should be used.
struct rt5670_platform_data is only used internally by the rt5670 codec
driver, so lets remove it before someone starts relying on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200703100823.258033-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if the ctx->spkamp is not recognized an error message is
reported but the code continues to set up the device with uninitialized
variables such as the number of widgets. Fix this by returning -EINVAL
for unrecognized speaker amplifier types.
Fixes: e1435a1feb ("ASoC: Intel: bxt-da7219-max98357a: support MAX98390 speaker amp")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Addresses-Coverity: ("Uninitialized scalar variable")
Link: https://lore.kernel.org/r/20200702114835.37889-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings
cs4270.c:508: warning: Function parameter or member 'component' not
described in 'cs4270_probe'
cs4270.c:508: warning: Excess function parameter 'pdev' description in
'cs4270_probe'
cs4270.c:548: warning: Function parameter or member 'component' not
described in 'cs4270_remove'
cs4270.c:548: warning: Excess function parameter 'pdev' description in
'cs4270_remove'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200701181320.80848-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning. The VOIP controls were not used in the mainline but
in special versions of Android. Keep and use __maybe_used to make
warning go away.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200701183716.83314-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support MAX98390 speaker amplifier on cometlake platform. Driver now
detects amplifier type in the probe function and installs corresponding
controls and DAPM widgets/routes in the late_probe function.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1593596211-28344-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
Changes since v3:
- Fix the single clock source handling and typo
Changes since v2:
- DT binding:
- use proper (?) patch subject for the binding docuemtn patch
- drop pll4 and pll15 from DT - driver should check the rate via
clk_get_parent. If it is not available (as it is not currently) then use the
match_data provided rates.
- add simple explanation for the clocking setup
- Use descriptive names for clocks: cpb/ivi-mcasp-auxclk and cpb/ivi-codec-scki
- dt_binding_check shows no errors/warnings
- ASoC machine driver:
- Try to read the PLL4/15 rate with clk API (parent of the two clock divider)
if it is not available then use the match_data provided numbers.
- Support for single PLL setup
Changes since v1:
- Fixed DT binding documentation errors
- Rebased on ASoC head and updated the driver to compile and work
This series adds support for the analog audio setup on the j721e EVM.
The audio setup of the EVM is:
Common Processor Board (CPB): McASP10 <-> pcm3168a
Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a
Both CPB and IVI wired in parallel serializer setup.
The first patch adds the stream_name for McASP driver as it is needed in
multicodec (and would be needed in DPCM) setup for proper DAPM handling.
The second patch adds two DT schema, one for the cpb and one for the cpb+ivi
card.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture
ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI)
ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)
.../bindings/sound/ti,j721e-cpb-audio.yaml | 95 ++
.../sound/ti,j721e-cpb-ivi-audio.yaml | 150 +++
sound/soc/ti/Kconfig | 8 +
sound/soc/ti/Makefile | 2 +
sound/soc/ti/davinci-mcasp.c | 3 +
sound/soc/ti/j721e-evm.c | 896 ++++++++++++++++++
6 files changed, 1154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
create mode 100644 sound/soc/ti/j721e-evm.c
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
The ASRC not only supports ideal ratio mode, but also supports
internal ratio mode.
For internal rato mode, the rate of clock source should be divided
with no remainder by sample rate, otherwise there is sound
distortion.
Add function fsl_asrc_select_clk() to find proper clock source for
internal ratio mode, if the clock source is available then internal
ratio mode will be selected.
With change, the ideal ratio mode is not the only option for user.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1593525367-23221-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes interrupt enable condition check with which now
interrupt gets enabled in dma_open.
Prior to this patch it was getting enabled in runtime_resume only.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200630183754.20641-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Randy Dunlap