Core changes:
- Minor but nice and important documentation clean-ups.
New drivers:
- New subdriver for the Qualcomm SDM670 SoC.
- New subdriver for the Intel Moorefield SoC.
- New trivial support for the NXP Freescale i.MXRT1170 SoC.
Other changes and improvements
- A major clean-up of the Qualcomm pin control device tree bindings
by Krzysztof.
- A major header clean-up by Andy.
- Some immutable irqchip clean-up for the Actions Semiconductor
and Nuvoton drivers.
- GPIO helpers for The Cypress cy8c95x0 driver.
- Bias handling in the Mediatek MT7986 driver.
- Remove the unused pins-are-numbered concept that never flew.
-----BEGIN PGP SIGNATURE-----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=PhTP
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
Commit 84582f9ed0 ("soc: fsl: qe: Avoid using gpio_to_desc()") changed
qe_pin_request() to request and hold GPIO corresponding to a given pin.
Unfortunately this does not work, as fhci-hcd requests these GPIOs
first, befor calling qe_pin_request() (see
drivers/usb/host/fhci-hcd.c::of_fhci_probe()).
To fix it change qe_pin_request() to request GPIOs non-exclusively, and
free them once the code determines GPIO controller and offset for each
GPIO/pin.
Also reaching deep into gpiolib implementation is not the best idea. We
should either export gpio_chip_hwgpio() or keep converting to the global
gpio numbers space until we fix the driver to implement proper pin
control.
Fixes: 84582f9ed0 ("soc: fsl: qe: Avoid using gpio_to_desc()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/Y400YXnWBdz1e/L5@google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OF node in the GPIO library is deprecated and soon
will be removed.
GPIO library now accepts fwnode as a firmware node, so
switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The qe gpio driver is a custom API combined GPIO and pin control
driver that exist outside of the pin control subsystem for historical
reasons.
We want to get rid of the old GPIO numberspace, so instead of
calling gpio_to_desc() we get the gpio descriptor for the requested
line from the device tree directly without passing through the
GPIO numberspace, and then we get the gpiochip from the descriptor.
Using the reference counting inside the gpio descriptor we can drop
the reference counting code in this driver. A second gpiod_get()
will not succeed.
To obtain the local hardware offset of the GPIO line, the driver
need to include the header from the gpiolib internals. This isn't
pretty but it is the lesser evil compared to keeping the code
as a roadblock to gpiolib refactoring. A proper solution would be
to rewrite the driver as a real pin control driver with a
built-in gpio_chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20221027081108.174662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.
Fixes: 7aa1aa6ece ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The double `is' in the comment in line 150 is repeated. Remove one
of them from the comment. Also removes a redundant tab in a new line.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The patch be7ecbd240b2: "soc: fsl: qe: convert QE interrupt
controller to platform_device" from Aug 3, 2021, leads to the
following static checker warning:
drivers/soc/fsl/qe/qe_ic.c:438 qe_ic_init()
warn: unsigned 'qe_ic->virq_low' is never less than zero.
In old variant irq_of_parse_and_map() returns zero if failed so
unsigned int for virq_high/virq_low was ok.
In new variant platform_get_irq() returns negative error codes
if failed so we need to use int for virq_high/virq_low.
Also simplify high_handler checking and remove the curly braces
to make checkpatch happy.
Fixes: be7ecbd240 ("soc: fsl: qe: convert QE interrupt controller to platform_device")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
Now fw_devlink expects driver to create and probe a struct device
for interrupt controller.
So lets convert this driver to simple platform_device with probe().
Also use platform_get_ and devm_ family function to get/allocate
resources and drop unused .compatible = "qeic".
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Commit 6ac9b61786 ("soc: fsl: qe: introduce qe_io{read,write}*
wrappers") added specific I/O accessors for qe because at that
time ioread/iowrite functions were sub-optimal on powerpc/32
compared to the architecture specific in_/out_ IO accessors.
But as ioread/iowrite accessors are now equivalent since
commit 894fa235eb ("powerpc: inline iomap accessors"),
use them in order to allow removal of the qe specific ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add a helper that takes a virtual address rather than the muram
offset. This will be used in a couple of places to avoid having to
store both the offset and the virtual address, as well as removing
NULL checks from the callers.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two functions cpm_muram_offset() and cpm_muram_dma() both need a
cast currently, one casts muram_vbase to do the pointer arithmetic on
void pointers, the other casts the passed-in address u8*.
It's simpler and more consistent to just always use void* and drop all
the casting.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow passing const-qualified pointers without requiring a cast in the
caller.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/fsl/qe/qe_common.c:237: warning: Function parameter or member 'addr' not described in 'cpm_muram_dma'
drivers/soc/fsl/qe/qe_common.c:237: warning: Excess function parameter 'offset' description in 'cpm_muram_dma'
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: act <dmalek@jlc.net>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: "Software, Inc" <source@mvista.com>
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Fix smatch warning:
drivers/soc/fsl/qe/ucc.c:526
ucc_set_tdm_rxtx_clk() warn: unsigned 'tdm_num' is never less than zero.
'tdm_num' is u32 type, never less than zero.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There is a statement that not indented correctly, remove the
extraneous space.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct qe_firmware.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Fixes the following sparse warning:
drivers/soc/fsl/qe/qe_common.c:75:48: warning: incorrect type in argument 2 (different base types)
drivers/soc/fsl/qe/qe_common.c:75:48: expected restricted __be32 const [usertype] *addr
drivers/soc/fsl/qe/qe_common.c:75:48: got unsigned int *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes the following sparse warnings:
drivers/soc/fsl/qe/qe.c:426:9: warning: cast to restricted __be32
drivers/soc/fsl/qe/qe.c:528:41: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/qe.c:528:41: expected unsigned long long static [addressable] [toplevel] [usertype] extended_modes
drivers/soc/fsl/qe/qe.c:528:41: got restricted __be64 const [usertype] extended_modes
Signed-off-by: Li Yang <leoyang.li@nxp.com>
drivers/soc/fsl/qe/gpio.c: In function qe_pin_request:
drivers/soc/fsl/qe/gpio.c:163:26: warning: variable mm_gc set but not used [-Wunused-but-set-variable]
commit 1e714e54b5 ("powerpc: qe_lib-gpio: use gpiochip data pointer")
left behind this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There are also PPC64, ARM and ARM64 based SOCs with a QUICC Engine,
and the core QE code as well as net/wan/fsl_ucc_hdlc and
tty/serial/ucc_uart has now been modified to not rely on ppcisms.
So extend the architectures that can select QUICC_ENGINE, and add the
rather modest requirements of OF && HAS_IOMEM.
The core code as well as the ucc_uart driver has been tested on an
LS1021A (arm), and it has also been tested that the QE code still
works on an mpc8309 (ppc). Qiang Zhao has tested that the QE-HDLC code
that gets enabled with this works on ARM64.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When allowing this driver to be built for ARM, the build fails (for
CONFIG_SMP=y) since ARM's asm/irq.h header is not self-contained:
In file included from drivers/soc/fsl/qe/ucc.c:18:0:
>> arch/arm/include/asm/irq.h:34:50: error: unknown type name 'cpumask_t'
extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
But nothing in this file actually uses anything from asm/irq.h -
removing this #include generates identical object code, both on PPC32
and on ARM (the latter with a patch added to asm/irq.h to make the
build work in the first place).
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, change the
ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an
ordinary check-for-negative. Also, this avoids treating 0 as "this
cannot have been returned from qe_muram_alloc() so don't free it".
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The sdma member of struct qe_immap is not at offset zero, so even if
qe_immr wasn't initialized yet (i.e. NULL), &qe_immr->sdma would not
be NULL.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Now that qe_muram_alloc() returns s32, adapt qe_sdma_init() and avoid
another few IS_ERR_VALUE() uses.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When trying to build this for a 64-bit platform, one gets warnings
from using IS_ERR_VALUE on something which is not sizeof(long).
Instead, change the various *_offset fields to store a signed integer,
and simply check for a negative return from qe_muram_alloc(). Since
qe_muram_free() now accepts and ignores a negative argument, we only
need to make sure these fields are initialized with -1, and we can
just unconditionally call qe_muram_free() in ucc_slow_free().
Note that the error case for us_pram_offset failed to set that field
to 0 (which, as noted earlier, is anyway a bogus sentinel value).
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
If the kmalloc() fails, we try to undo the gen_pool allocation we've
just done. Unfortunately, start has already been modified to subtract
the GENPOOL_OFFSET bias, so we're freeing something that very likely
doesn't exist in the gen_pool, meaning we hit the
kernel BUG at lib/genalloc.c:399!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
[<803fd0e8>] (gen_pool_free) from [<80426bc8>] (cpm_muram_alloc_common+0xb0/0xc8)
[<80426bc8>] (cpm_muram_alloc_common) from [<80426c28>] (cpm_muram_alloc+0x48/0x80)
[<80426c28>] (cpm_muram_alloc) from [<80428214>] (ucc_slow_init+0x110/0x4f0)
[<80428214>] (ucc_slow_init) from [<8044a718>] (qe_uart_request_port+0x3c/0x1d8)
(this was tested by just injecting a random failure by adding
"|| (get_random_int()&7) == 0" to the "if (!entry)" condition).
Refactor the code so we do the kmalloc() first, meaning that's the
thing that needs undoing in case gen_pool_alloc_algo() then
fails. This allows a later cleanup to move the locking from the
callers into the _common function, keeping the kmalloc() out of the
critical region and then, hopefully (if all the muram_alloc callers
allow) change it to a GFP_KERNEL allocation.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
cpm_muram_alloc_common() tries to support a kind of lazy
initialization - if the muram_pool has not been created yet, it calls
cpm_muram_init(). Now, cpm_muram_alloc_common() is always called under
spin_lock_irqsave(&cpm_muram_lock, flags);
and cpm_muram_init() does gen_pool_create() (which implies a
GFP_KERNEL allocation) and ioremap(), not to mention the fun that
ensues from cpm_muram_init() doing
spin_lock_init(&cpm_muram_lock);
In other words, this has never worked, so nobody can have been relying
on it.
cpm_muram_init() is called from a subsys_initcall (either from
cpm_init() in arch/powerpc/sysdev/cpm_common.c or, via qe_reset(),
from qe_init() in drivers/soc/fsl/qe/qe.c).
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This allows one to simplify callers since they can store a negative
value as a sentinel to indicate "this was never allocated" (or store
the -ENOMEM from an allocation failure) and then call cpm_muram_free()
unconditionally.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Nobody uses the return value from cpm_muram_free, and functions that
free resources usually return void. One could imagine a use for a "how
much have I allocated" a la ksize(), but knowing how much one had
access to after the fact is useless.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There are a number of problems with cpm_muram_alloc() and its
callers. Most callers assign the return value to some variable and
then use IS_ERR_VALUE to check for allocation failure. However, when
that variable is not sizeof(long), this leads to warnings - and it is
indeed broken to do e.g.
u32 foo = cpm_muram_alloc();
if (IS_ERR_VALUE(foo))
on a 64-bit platform, since the condition
foo >= (unsigned long)-ENOMEM
is tautologically false. There are also callers that ignore the
possibility of error, and then there are those that check for error by
comparing the return value to 0...
One could fix that by changing all callers to store the return value
temporarily in an "unsigned long" and test that. However, use of
IS_ERR_VALUE() is error-prone and should be restricted to things which
are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim
for changing to the standard kernel style
int foo = cpm_muram_alloc();
if (foo < 0)
deal_with_it()
some->where = foo;
Changing the return type from unsigned long to s32 (aka signed int)
doesn't change the value that gets stored into any of the callers'
variables except if the caller was storing the result in a u64 _and_
the allocation failed, so in itself this patch should be a no-op.
Another problem with cpm_muram_alloc() is that it can certainly
validly return 0 - and except if some cpm_muram_alloc_fixed() call
interferes, the very first cpm_muram_alloc() call will return just
that. But that shows that both ucc_slow_free() and ucc_fast_free() are
buggy, since they assume that a value of 0 means "that field was never
allocated". We'll later change cpm_muram_free() to accept (and ignore)
a negative offset, so callers can use a sentinel of -1 instead of 0
and just unconditionally call cpm_muram_free().
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This is necessary for this to work on little-endian hosts.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
We need to apply be32_to_cpu to make this work correctly on
little-endian hosts.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Instead of manually doing of_get_property/of_find_property and reading
the value by assigning to a u32* or u64* and dereferencing, use the
of_property_read_* functions.
This make the code more readable, and more importantly, is required
for this to work correctly on little-endian platforms.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The public qe_ic.h header is no longer included by anything but
qe_ic.c. Merge both headers into qe_ic.c, and drop the unused
constants.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
qe_ic_init() takes a flags parameter, but all callers (including the
sole remaining one) have always passed 0. So remove that parameter and
simplify the body accordingly. We still explicitly initialize the
Interrupt Configuration Register (CICR) to its reset value of
all-zeroes, just in case the bootloader has played funny games.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
These are only called from within qe_ic.c, so make them static.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This driver is currently PPC-only, and on powerpc, NO_IRQ is 0, so
this doesn't change functionality. However, not every architecture
defines NO_IRQ, and some define it as -1, so the detection of a failed
irq_of_parse_and_map() (which returns 0 on failure) would be wrong on
those. So to prepare for allowing this driver to build on other
architectures, drop all references to NO_IRQ.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There are no current callers of these functions, and they use the
ppc-specific virq_to_hw(). So removing them gets us one step closer to
building QE support for ARM.
If the functionality is ever actually needed, the code can be dug out
of git and then adapted to work on all architectures, but for future
reference please note that I believe qe_ic_set_priority is buggy: The
"priority < 4" should be "priority <= 4", and in the else branch 24
should be replaced by 28, at least if I'm reading the data sheet right.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The qe_ic_cascade_{low,high}_mpic functions are now used as handlers
both when the interrupt parent is mpic as well as ipic, so remove the
_mpic suffix.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
These functions are only ever called through a function pointer, and
therefore it makes no sense for them to be "static inline" - gcc has
no choice but to emit a copy in each translation unit that takes the
address of one of these. Since they are now only referenced from
qe_ic.c, just make them local to that file.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Having to call qe_ic_init() from platform-specific code makes it
awkward to allow building the QE drivers for ARM. It's also a needless
duplication of code, and slightly error-prone: Instead of the caller
needing to know the details of whether the QUICC Engine High and QUICC
Engine Low are actually the same interrupt (see e.g. the machine_is()
in mpc85xx_mds_qeic_init), just let the init function choose the
appropriate handlers after it has parsed the DT and figured it out. If
the two interrupts are distinct, use separate handlers, otherwise use
the handler which first checks the CHIVEC register (for the high
priority interrupts), then the CIVEC.
All existing callers pass 0 for flags, so continue to do that from the
new single caller. Later cleanups will remove that argument
from qe_ic_init and simplify the body, as well as make qe_ic_init into
a proper init function for an IRQCHIP_DECLARE, eliminating the need to
manually look up the fsl,qe-ic node.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There's no point in registering with sysfs when that doesn't actually
allow any interaction with the device or driver (no uevents, no sysfs
files that provide information or allow configuration, no nothing).
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
high_active is only assigned to but never used. Remove it.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
These includes are not actually needed, and asm/rheap.h and
sysdev/fsl_soc.h are PPC-specific, hence prevent compiling QE for
other architectures.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Linus Torvalds